Sonnet firmware

Hi All I'm putting a Sonnet 1.2 Encore card in One of my Cubes and I forgot to do the firmware update first. Can I boot with a OS 9 disk and install the firmware that way? Or do I have to back track. John Carmonne Yorba Linda USA Sent from my MBP -- You received this message because yo

Re: 933 mhz G4 Quicksilver Powermac Dual boot?

On 6/2/10 8:17 PM, Ralph Green wrote: Howdy, The one I'd recommend is: http://cdimage.ubuntu.com/kubuntu/ports/releases/lucid/release/kubuntu-10.04-alternate-powerpc.iso FYI, I'm running Ubuntu 9.04 on my Pismo and a G4 Sawtooth. I tried 9.10 on the Pismo but it didn't work right at all.

Re: 933 mhz G4 Quicksilver Powermac Dual boot?

Howdy, The one I'd recommend is: http://cdimage.ubuntu.com/kubuntu/ports/releases/lucid/release/kubuntu-10.04-alternate-powerpc.iso It is listed on the page at: http://cdimage.ubuntu.com/kubuntu/ports/releases/lucid/release/ This is the latest version. The installer is basically the debia

Re: hard disk transfer

On Jun 2, 2010, at 7:21 PM, mlsimmons wrote: OTOH I've read conflicting reports of this quicksilver version being able to recognize anything over 128GB. A dual 800 MHz Quicksilver is a QS 2001. It does not have large drive support built into the ROM, but this support can easily be added, an

Re: hard disk transfer

Thanks for responding -when you say little or no problems, it implys that there might be little problems? are there any that come to mind? The 80gig drive is partitioned into 3 partitions and I haven't really challenged the size so I'm clearly not a power user. OTOH I've read conflicting reports of

Re: hard disk transfer

It should work just fine. If needed do a Archive and install. On 6/2/10, mlsimmons wrote: > I have been using a Yikes G4 with 1G ram and running Tiger 10.4.11 on > a 80 gig hard drive for a long time now- tiger has slowed down the > machine and youtube video is just too choppy (partially due to

Re: Why not Safari 3.0.4

Okay - Here is the web page where I am seeing this: http://www.shutterfly.com/sites/view.sfly?fid=3f138555b3c8ef48 As I originally said, this is a message coming when I try to enter my high school reunion social networking site (which is on Shutterfly). Not that I am planning to go to the reunio

Re: hard disk transfer

On Jun 2, 2010, at 8:31 PM, mlsimmons wrote: I have been using a Yikes G4 with 1G ram and running Tiger 10.4.11 on a 80 gig hard drive for a long time now- tiger has slowed down the machine and youtube video is just too choppy (partially due to a relatively slow DSL account). I just picked up a

hard disk transfer

I have been using a Yikes G4 with 1G ram and running Tiger 10.4.11 on a 80 gig hard drive for a long time now- tiger has slowed down the machine and youtube video is just too choppy (partially due to a relatively slow DSL account). I just picked up a dual processor 800 Quicksilver for $50. I'm not

Re: address book backup help!

>> >> Well you can try the technique I used when my laptop drive bit the dust. >> >> pop the drive into a sturdy ziplock baggie (along with some silicon dry rite >> packs if you have 'em) into the freezer for several hours at least. >> >> Pop it out attach it (It MASSIVELY helps to have one o

Re: Was Re: Why not Safari 3.0.4 Now Webkit

On Wed, Jun 2, 2010 at 5:30 AM, Kris Tilford wrote: > On Jun 2, 2010, at 4:48 AM, Stephen Conrad wrote: > > How do I run Webkit? >> > > To run Webkit you download it and double-click the icon. > > Webkit is self-contained, meaning it's a stand-alone application that has > it's own self-contained

Re: address book backup help!

On Jun 2, 2010, at 3:45 PM, Bruce Johnson wrote: On Jun 2, 2010, at 3:29 PM, Jeffrey Engle wrote: On Jun 2, 2010, at 2:53 PM, Bruce Johnson wrote: Why don't you want to use Migration assistant? The drive was damaged in a lightning storm? and for some reason I couldn't do a migration (

Re: address book backup help!

On Jun 2, 2010, at 3:29 PM, Jeffrey Engle wrote: > > On Jun 2, 2010, at 2:53 PM, Bruce Johnson wrote: > >> Why don't you want to use Migration assistant? > > The drive was damaged in a lightning storm? and for some reason I couldn't do > a migration (or anything else for that matter that took

Re: address book backup help!

On Jun 2, 2010, at 2:53 PM, Bruce Johnson wrote: Why don't you want to use Migration assistant? The drive was damaged in a lightning storm? and for some reason I couldn't do a migration (or anything else for that matter that took more than 30 secs to do) thus the need to be quick. I d

Re: G4 MDD RAM

On Jun 2, 2010, at 2:41 PM, John Carmonne wrote: The RAM is on the way as soon as I get it I'll take a shot at it, otherwise it'll fit my PM G5. Mark said there was some type of open firmware hack to get more RAM recognized. I looked hard and couldn't find one for the MDD specifically, bu

Re: address book backup help!

On Jun 2, 2010, at 2:40 PM, Jeffrey Engle wrote: > what about firefox? /Users//Library/Application Support/Firefox IN general *everything* to do with users perefs, application data, etc lives in /Users//Library. Why don't you want to use Migration assistant? -- Bruce Johnson University of

Re: address book backup help!

what about firefox? On Jun 2, 2010, at 2:01 PM, Bruce Johnson wrote: On Jun 2, 2010, at 1:54 PM, Jeffrey Engle wrote: anybody know where to find all files associated with "address book" in leopard? I can't boot the disk and I need to transfer the address book... and no, I don't want to us

Re: address book backup help!

On Jun 2, 2010, at 1:54 PM, Jeffrey Engle wrote: > anybody know where to find all files associated with "address book" in > leopard? I can't boot the disk and I need to transfer the address book... and > no, I don't want to use migration assistant. Jeff I presume you mean user data? /Users//

address book backup help!

anybody know where to find all files associated with "address book" in leopard? I can't boot the disk and I need to transfer the address book... and no, I don't want to use migration assistant. Jeff -- You received this message because you are a member of G-Group, a group for those using G3,

Re: Infamous error 36

On Wed, 2010-06-02 at 07:16 -0600, Nestamicky wrote: > On 01/06/10 10:14 PM, Ralph Green wrote: > Thanks for that. I log in using password and user name. I'm able to > login and transfer, but after a while, get the error. What I'm finding > amazing is how common this problem is and yet there does

Re: 933 mhz G4 Quicksilver Powermac Dual boot?

On Jun 2, 2010, at 2:59 PM, Mark Sokolovsky wrote: Excuse me, i would like to know where can I download Kubuntu 9.04 for my PM G4, or any version of Kubuntu above V7, because Wherever I go, can't find any download links or anything.

Re: 933 mhz G4 Quicksilver Powermac Dual boot?

> > Excuse me, i would like to know where can I download Kubuntu 9.04 for my > PM G4, or any version of Kubuntu above V7, because Wherever I go, can't > find any download links or anything. > --  Sent from my Power mac G4 Sawtooth. -- You received this message because you are a member of G-G

Re: G4 MDD RAM

My PM G4 Sawtooth did recognize 4GB. It's just that Leopard and the OF weren't too happy with it for a while. Kps were a bit more common than I thought they would be. --  Sent from my Power mac G4 Sawtooth. -- You received this message because you are a member of G-Group, a group for those u

Re: G4 MDD RAM

Try looking on google. You most likely will find how to type in the command on open firmware, but BEWARE. I had to re-install Leopard 4 times before my system could settle with this 4GB setting. --  Sent from my Power mac G4 Sawtooth. -- You received this message because you are a member of G

Re: G4 MDD RAM

This was also done because I hacked the open firmware. I am sorry, but I don't remember how the trick went. I first reset the open firmware by starting up and pressing and holding Command+Option+P+R. Then, I restarted into open firmware, and I typed in some kind of command to remove the limit for R

Re: Anyone tried Logitech's LCC 3.2?

On Jun 2, 2010, at 2:02 PM, Bill Connelly wrote: On Jun 2, 2010, at 1:19 PM, Dan wrote: At 10:02 AM -0400 6/2/2010, Bill Connelly wrote: I'll try an earlier version I have saved ... any suggestions which one might be best? perhaps removing the Scroll Enhancer? Have LCC20, 222, and 260. L

Re: G4 MDD RAM

I have 2 1GB sticks running fine in my MDD 1.42. I haven't tried adding anything beyond that, particularly because two of my RAM slots cause an OF error. (Which is why I have the 2 1GB sticks in the first place and not 4 512MB sticks.) On Wed, Jun 2, 2010 at 3:40 PM, JoeTaxpayer wrote: > Even thi

Re: G4 MDD RAM

It will recognize 2 of the 1 gig modules for 2 gig, once it hits its max, it stops. There has to be a hack we can do somehow some way to make it recognize the ram, its apparently a soft limit. On Jun 2, 2010, at 2:41 PM, John Carmonne wrote: > > On Jun 2, 2010, at 11:56 AM, Ricardo Sevilla wro

Re: G4 MDD RAM

On Jun 2, 2010, at 11:56 AM, Ricardo Sevilla wrote: > WEre you able to do this? What was the outcome? > On Jun 2, 2010, at 8:51 AM, Bruce Johnson wrote: > >> >> On Jun 2, 2010, at 8:47 AM, john CARMONNE wrote: >> >>> >>> Hi All >>> I'm wondering if I install in my G4 MDD Dual 1.25, two 1 GB P

Re: G4 MDD RAM

Even this is different and I suppose an improvement from what i understand. My MDDs all show 512MB in each dimm slot. Haven't tried 1GB, never heard it works. On Jun 2, 12:33 pm, Jason Brown wrote: > I think the ram limit is artificial by firmware. I am not sure on this > though. My MDD will rec

Re: G4 MDD RAM

On 02 Jun 2010, at 2:07 PM, Bruce Johnson wrote: On Jun 2, 2010, at 8:47 AM, john CARMONNE wrote: I'm wondering if I install in my G4 MDD Dual 1.25, two 1 GB PC3200 DDR 184 pin sticks and two 512 will the machine report 3 GB? Yes it will. Well now I'm doubting my own memory. I could hav

Re: G4 MDD RAM

On Jun 2, 2010, at 11:56 AM, Ricardo Sevilla wrote: > WEre you able to do this? What was the outcome? > On Jun 2, 2010, at 8:51 AM, Bruce Johnson wrote: > >> >> On Jun 2, 2010, at 8:47 AM, john CARMONNE wrote: >> >>> >>> Hi All >>> I'm wondering if I install in my G4 MDD Dual 1.25, two 1 GB P

Re: G4 MDD RAM

WEre you able to do this? What was the outcome? On Jun 2, 2010, at 8:51 AM, Bruce Johnson wrote: On Jun 2, 2010, at 8:47 AM, john CARMONNE wrote: Hi All I'm wondering if I install in my G4 MDD Dual 1.25, two 1 GB PC3200 DDR 184 pin sticks and two 512 will the machine report 3 GB? Yes it

Re: Anyone tried Logitech's LCC 3.2?

On Jun 2, 2010, at 1:19 PM, Dan wrote: At 10:02 AM -0400 6/2/2010, Bill Connelly wrote: I'll try an earlier version I have saved ... any suggestions which one might be best? perhaps removing the Scroll Enhancer? Have LCC20, 222, and 260. LCC260 gives Logitech Installer 1.0.2 ... I'll try

Re: viewing earlier internet sites no longer in existence

thank you! On Wed, Jun 2, 2010 at 10:34 AM, Len Gerstel wrote: > > On Jun 2, 2010, at 1:31 PM, M. Worgan, J. wrote: > > Is there still a site that takes you to old sites that used to be on the >> internet but are no longer there - that takes you to older copies of the >> internet? Like going ba

viewing earlier internet sites no longer in existence

Is there still a site that takes you to old sites that used to be on the internet but are no longer there - that takes you to older copies of the internet? Like going back in time by viewing stored copies of what was on the internet some years ago? -- You received this message because you are a

Re: viewing earlier internet sites no longer in existence

On Jun 2, 2010, at 1:31 PM, M. Worgan, J. wrote: Is there still a site that takes you to old sites that used to be on the internet but are no longer there - that takes you to older copies of the internet? Like going back in time by viewing stored copies of what was on the internet some ye

Re: Anyone tried Logitech's LCC 3.2?

At 10:02 AM -0400 6/2/2010, Bill Connelly wrote: I'll try an earlier version I have saved ... any suggestions which one might be best? perhaps removing the Scroll Enhancer? Have LCC20, 222, and 260. LCC260 gives Logitech Installer 1.0.2 ... I'll try that this morning. I had some problems wit

Re: 933 mhz G4 Quicksilver Powermac Dual boot?

On 6/1/10 10:52 PM, Scotty wrote: Is it possible to setup a dual boot OS X 10.4 and Ubuntu on my Quicksilver? Sure, I have Tiger and Fedora on my QS. -- Clark Martin Redwood City, CA, USA Macintosh / Internet Consulting "I'm a designated driver on the Information Super Highway" -- You rece

Re: G4 MDD RAM

I think the ram limit is artificial by firmware. I am not sure on this though. My MDD will recognize 2 1 gig modules for 2 gig, but it ignores anything after that like it doesnt exist. On Jun 2, 2010, at 11:18 AM, JoeTaxpayer wrote: > Sorry - I have these machines and never saw anyone say they

Re: G4 MDD RAM

Sorry - I have these machines and never saw anyone say they had it recognize more than the 2GB. Any discussions or spec referencing the RAM says that 512MB per slot is max. If anyone has an "about this Mac" image showing more than 2GB/ 512 per slot, I'd love to see it. With all the G4 MDDs out ther

Re: G4 MDD RAM

On Jun 2, 2010, at 8:47 AM, john CARMONNE wrote: > > Hi All > I'm wondering if I install in my G4 MDD Dual 1.25, two 1 GB PC3200 DDR 184 > pin sticks and two 512 will the machine report 3 GB? Yes it will. -- Bruce Johnson University of Arizona College of Pharmacy Information Technology Group

G4 MDD RAM

Hi All I'm wondering if I install in my G4 MDD Dual 1.25, two 1 GB PC3200 DDR 184 pin sticks and two 512 will the machine report 3 GB? John Carmonne Yorba Linda USA Sent from my TiBook 500 -- You received this message because you are a member of G-Group, a group for those using G3, G4, a

Re: Anyone tried Logitech's LCC 3.2?

On Jun 2, 2010, at 10:02 AM, Bill Connelly wrote: Have LCC20, 222, and 260. LCC260 gives Logitech Installer 1.0.2 ... I'll try that this morning. Well ... here I go ... talking to myself again: I reverted to LCC260 (saved on my disk) which gives me the Installer version 1.0.2. Also r

Re: Keychain was Re: LOST PASSWORD

On Jun 1, 2010, at 7:39 PM, Linda wrote: > > On May 20, 2010, at 5:42 PM, Andy wrote: > >> This won't however change your Keychain password which will remain as it >> was. If you can't remember it the only option is then to create a new >> keychain. > > > Who designs this crazy stuff? Apple

Re: Infamous error 36

On Jun 1, 2010, at 8:51 PM, Nestamicky wrote: > Google pages are steaming with this error: > > "The Finder cannot complete the operation because some of the data in > smb://[..] could not be read or written" > > I'm Googled out, trying to find a solution that works. Got any ideas? I'm > tryin

Re: Anyone tried Logitech's LCC 3.2?

On Jun 2, 2010, at 12:11 AM, Dan wrote: At 12:27 PM -0400 5/31/2010, Bill Connelly wrote: Under 10.5.8 on my Digital Audio Dual 533, I've been using an Apple AL KB and Mighty Mouse with great success, and wanted to switch to my Logitech MX Duo KB and Mouse. I just tried Logitech's LCC 3.2

Re: Infamous error 36

On 01/06/10 10:14 PM, Ralph Green wrote: Howdy, http://support.apple.com/kb/TA20949?viewlocale=en_US indicates that other samba setup problems can cause this. Is the share setup to support guest access? If not, are you supplying the correct username and password? If you want the samba shar

Re: 933 mhz G4 Quicksilver Powermac Dual boot?

Is it possible to setup a dual boot OS X 10.4 and Ubuntu on my Quicksilver? -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml a

Re: Was Re: Why not Safari 3.0.4 Now Webkit

On Jun 2, 2010, at 4:48 AM, Stephen Conrad wrote: How do I run Webkit? To run Webkit you download it and double-click the icon. Webkit is self-contained, meaning it's a stand-alone application that has it's own self-contained frameworks. Safari installs System frameworks, hence, Safari ha

Was Re: Why not Safari 3.0.4 Now Webkit

How do I run Webkit? -- Steve Conrad Henrietta, MO 64036 "The time has come for mankind to grow up and leave its cradle behind; to go forth and claim our place in outer space." - Capt. Henry Gloval (\__/) (='.'=) (")_(") Help Bunny Take Over The World! -- You received th