Again, that would be developed for an ARM cpu. I'm looking for a way to use
my oldish hardware in a very productive way. I'm not wanting to use an
ipod/ipad. I use an android phone because I found it to be much better then
my jailbroken(that I jailbroke) iphone. Runs faster and cleaner out of
Will it work for 10.2?
On Sun, May 22, 2011 at 9:25 PM, Bruce Johnson john...@pharmacy.arizona.edu
wrote:
On May 22, 2011, at 5:41 PM, Jonas Ulrich jonasulrich3...@gmail.com
wrote:
I have a G4 400MHZ AGP tower. It has a fresh install of 10.4.11.
Almost every application I launch,
This has promise. However, my car is a 1995 and this app looks like it is for
cars 1996 and newer. I believe my car is supposed to have OBD-II in name, but
last time this came up in discussion, my car has more of a hybrid than real
OBD-II and the hybrid firmware could cause problems for this.
On 22/05/11 10:30 PM, Alexander Gomes alexcomputersolut...@gmail.com
wrote:
Again, that would be developed for an ARM cpu. I'm looking for a way to use
my oldish hardware in a very productive way. I'm not wanting to use an
ipod/ipad. I use an android phone because I found it to be much better
On May 22, 2011, at 7:30 PM, Alexander Gomes wrote:
Will it work for 10.2?
Go here http://applejack.sourceforge.net/; there's a link to the 1.4
version that works with 10.2 there in the download section.
--
Bruce Johnson
University of Arizona
College of Pharmacy
Information Technology
Greetings,
What does your Console Log say when you try launching an
application.
There should be lots of clues in the log as to the problem.
Cheers
Harry
San Jose, Ca
(`-''-/).___ ..- -''`.. _
( 6_ 6 )`-.( ``-._.-`)
(_Y_.)'._ ) `._ `.'``-..-'
` `_..`--'_..-_/
I have a G5 1.8 dual with 5.8 on it. I have the ATI 9600 Dual DVI 128
AGP card in it. I have one VGA monitor and the apple DVI to TV
adapter on the other port. I can't get the other port to work with
S-Video hookup to our TV. I doesn't seem to recognized the second
port or switched to a
On May 23, 2011, at 3:37 PM, Wayne Garrett wrote:
I can't get the other port to work with
S-Video hookup to our TV. I doesn't seem to recognized the second
port or switched to a resolution that doesn't work. Any ideas?
I don't think any of the ATI cards supported all three ports
I just want two
On 5/23/11, Bruce Johnson john...@pharmacy.arizona.edu wrote:
On May 23, 2011, at 3:37 PM, Wayne Garrett wrote:
I can't get the other port to work with
S-Video hookup to our TV. I doesn't seem to recognized the second
port or switched to a resolution that doesn't work.
Just needing a confirmation here...
On the powermac MDD, I'm assuming that the system will look for a
startup/boot volume at the end or last connection of the cable plugged into
the 100mhz bus? That is if no other boot volume is blessed ... make sense?
Jeff
Jeffrey Engle
Kamiah, Idaho 83536
On May 23, 2011, at 5:37 PM, Wayne Garrett wrote:
I have one VGA monitor and the apple DVI to TV
adapter on the other port.
Switch the cable to be certain both DVI ports on the video card work
individually. If both DVI ports work individually, then the problem is
with the DVI-to-S-video
I just got a Radeon 9800 Pro Mac Edition 256 card. It says its an
AGP card yet it does not fit in the AGP slot on my QS G4 933. The
slots don't line up at all. I did the tape mod on pins 3 and 11.
It is a G5 card (8x) but I am fairly certain the G4 and G5 have the
same AGP. What am I
On 5/23/11 6:57 PM, Jeffrey Engle wrote:
Just needing a confirmation here...
On the powermac MDD, I'm assuming that the system will look for a
startup/boot volume at the end or last connection of the cable
plugged into the 100mhz bus? That is if no other boot volume is
blessed ... make sense?
Cable position will matter with some systems. Some will not like the master
being on the slave and likewise, even using the correct jumper settings.
But, most macs won't boot secondary master or slave unless told to ie-by a
keypress
--
You received this message because you are a member of
What? I don't think so. It should look for the primary master, then
secondary master for the primary IDE controller. It won't boot automatically
from the secondary master IDE without being told to(cd rom drive)by holding
option or the C key down upon boot.
--Sorry, this is what I originally
15 matches
Mail list logo