Hi Gang,
Don't know about you, but if I want to get ignored, I post a note on the
MacIntel group.
The G-Group is always good to respond, so… can someone perhaps tell me who
the List nanny is for the MacIntel group and I can reach them to find out
why I never get a response and my posts, well,
Hi all,
Hopefully not too off-topic: where does one go to join the Intel-based
grooup? Not readily apparent.
Many thanks,
Dana
--
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The
Greetings all,
I have a late 2005 G5 (dual-core, 2.3GHz model). It has been very nice to
me these last 3+ years. ABout 3 weeks ago, I went through a couple days
where the only way I could start it out of a cold boot (1st thing in the
morning) was to reset the SMU (reset the board), then zap the
Greetings all,
I need some help remembering - a trip down memory lane.
I find myself in an unplanned need to access six IBM SCSI-Ultra 320
drives (with SCA interface, so I know an adapter from 68-pin cable to
SCA is most likely involved). I seem to recall that I had such a card
from either Adaptec
at that
time, iirc.
Will check Trish's Hardware Hell; never heard of it :-)
Thanks again,
Dana
On Sunday, January 13, 2013 4:56:38 PM UTC-5, DLC wrote:
Greetings all,
I need some help remembering - a trip down memory lane.
I find myself in an unplanned need to access six IBM SCSI-Ultra 320
:
On Jan 13, 2013, at 4:56 PM, DLC wrote:
Many thanks for any thoughts,
Regards,
Dana
I believe I have this one in my Yikes! running Tiger IIRC:
ATTO ExpressPCI PSC SCSI Controller Card
Features:
Model # 0042-PCBX-002
Working Pull from a Power Mac G3
External 68-pin
Thank you for the response.
WHERE can I obtain this disc? (Apple Service Diagnostic 2.5.8)
Thanks!
Dana
On Tuesday, October 2, 2012 10:56:26 PM UTC-4, DLC wrote:
Greetings all.
I while back I had a troublesome G5 tower (June 04 model Dual 1.8GHz CPUs
w/PCI slots, 8x AGP) that was giving me
.
Regards,
Dana
On Sunday, October 7, 2012 2:53:57 AM UTC-4, Mac User #330250 wrote:
-- Original message --
Subject: Re: Swapping out a G5 Motherboard
Date:Sunday, 07. October 2012
From:DLC dlcat...@gmail.com javascript:
To: G-Group g3-5...@googlegroups.com
Greetings all,
Still curious about this scenario. Simply, can one swap good G5 CPUs
into a replacement motherboard without any problems?
Thanks,
Dana
On Oct 2, 10:56 pm, DLC dlcatft...@gmail.com wrote:
Greetings all.
I while back I had a troublesome G5 tower (June 04 model Dual 1.8GHz CPUs
w
Greetings all.
I while back I had a troublesome G5 tower (June 04 model Dual 1.8GHz CPUs
w/PCI slots, 8x AGP) that was giving me boot-up issues. With help from the
list, I pretty much determined that I needed to replace the motherboard.
I've located a reasonably priced replacement, so I would
Hello MJoeYoung,
Thank you for the help and link for prospective parts.
Here is what I did recently:
replaced the PRAM,
swapped the CPUs (A to B, and vs. a vs.)
made sure the CPUs were well-seated.
Of course, having to take apart the G5 (not as bad a project as I
thought), that gave me a chance to
Thank you for the response, MJoe.
I located the correct allen wrench and was able to do as you
indicated. Turns out there are eight of the screws (4 per CPU) though
the instructions referred to only 6, but all came apart with
surprising ease once the CPUs came off (and they were pretty easy too
suggestions, as Fabian pointed out in his equally helpful note.
Thank you all again - I shal attempt to keep you apprised as the project
progresses (hopefully, that is - let's hope it doesn't devolve!).
Regards,
Dana
On Sunday, September 16, 2012 7:46:07 PM UTC-4, DLC wrote:
Greetings all,
I'd
is the motherboard (first) or processor board, but want to
exhaust all options before I begin parting out the good components.
Many thanks again,
Dana
On Sunday, September 16, 2012 7:46:07 PM UTC-4, DLC wrote:
Greetings all,
I'd like to seek advice for those who've tread down the path I need
come on full tilt, leaving me with a hard shutdown as an only option for
turning them off.
Hope this helps.
Thanks,
Dana
On Sunday, September 16, 2012 7:46:07 PM UTC-4, DLC wrote:
Greetings all,
I'd like to seek advice for those who've tread down the path I need to
take. A while back I donated
Greetings all,
I'd like to seek advice for those who've tread down the path I need to
take. A while back I donated a G5 tower (June 2004 model, 1.8GHz DP w/ PCI
slots) to a small private school. Recently I was told by the teacher that
it just stopped working, so I took it in and ascertained
Greetings all,
This is a bit off-topic (though I do sync my iPad to my G5, so maybe a
once-removed exception can be invoked).
I have an iPad 2, courtesy of work-related research, and am curious if
there are any recommended user groups that this fine consortium of
colleagues have discovered and
Greetings all,
I have a Powerbook G4 connected to an Intel iMac via Target Disk mode,
with the intent of copying files to the iMac in preparation for a
nuke and pave for the G4 Powerbook (which it desperately needs at
this point, as it is exhibiting serious OS issues, hence why the owner
gave it
Greetings all,
I use Entourage in MS 2008 for my email client needs, this on a PMac
G5 running 10.5.8.
Someone recently tried to send me a .exe driver for my WIn laptop.
Entourage states it is blocking this potentially unsafe attachment
and indeed does not show it as an attachment when I open the
as an Airport card; apparently not all
Broadcoms are created equal.
Out of curiosity, what make is yours (since it does work?)
Thanks,
Dana
On Nov 22, 10:38 pm, JohnCarmonne carmo...@aol.com wrote:
On Nov 22, 2011, at 7:27 PM, DLC wrote:
Hi John,
Thanks for sharing - I do not get any recognition like
://www.ebay.com/itm/Apple-MacBook-BCM4321-WiFi-mini-PCI-e-N-Wireless-Card-/170732707129?pt=LH_DefaultDomain_0hash=item27c0765d39#ht_1376wt_1350
Thanks again,
Dana
On Nov 22, 9:52 pm, DLC dlcatft...@gmail.com wrote:
Greetings, all.
Okay, a while ago I received great advice from some colleagues here
Thank you Kris.
This gives me some directions to look into - I'll repost when I have
some of this needed info. for you.
Many thanks,
Dana
On Nov 27, 6:41 pm, Kris Tilford ktilfo...@cox.net wrote:
I'm almost certain that most all Broadcom cards can work, but a few
are problematic. I've been
card made for this series, awfully rare to find and
prohibitive in $$). Too bad! Sure would make my task easier!
Dana
On Nov 27, 6:10 pm, JohnCarmonne carmo...@aol.com wrote:
On Nov 27, 2011, at 2:46 PM, DLC wrote:
Greetings all,
Just chiming in after the holidays to bring this up to date. My
Greetings, all.
Okay, a while ago I received great advice from some colleagues here
regarding wireless cards and a G5 with a PCI-E slot compatibility.
After doing some homework, I purchased one of those mini PCI_E
adapters and then a PCI-E wireless card to fit into it.
Installed the completed unit
Hi John,
Thanks for sharing - I do not get any recognition like that :-(
-Dana
On Nov 22, 10:12 pm, JohnCarmonne carmo...@aol.com wrote:
On Nov 22, 2011, at 6:52 PM, DLC wrote:
Greetings, all.
Okay, a while ago I received great advice from some colleagues here
regarding wireless
, at 2:13 PM, DLC wrote:
Thanks to all offering advice.
Okay, I am looking at this model here, just for comparison and
continued learning:
http://www.amazon.com/gp/product/B005GDTIK4/ref=olp_product_details?i...
1) is this compatible w/ Leopard?
2) presuming the answer to #1 is yes, where
Tilford ktilfo...@cox.net wrote:
On Oct 15, 2011, at 12:01 PM, DLC wrote:
I also notice lots of Apple, 3rd party (and Dell) wireless cards such
the following, that claim to be mini-PCI-E
http://www.ebay.com/itm/180734937482?ssPageName=STRK:MEWAX:IT_trksid...
Would these work at all?
You can
Hi Peter,
Thank you for the advice, both from you and Kris. I believe i still
have some homework to do. Do you have a specific brand, unit that you
recommend? Are all PCI-E mini cards that same size/form factor?
Thanks again,
Dana
On Oct 15, 1:27 pm, peterh...@cruzio.com wrote:
I need some
into? the
little bi-slot near the RAM (where the Apple combo card would go), or
do I need to be an adapter such as what Kris suggested (Mini PCI-E
adapter card)?
3) re: form factor, are all cards designated MINI PCI-E the same
size/shape?
Thank you again,
Dana
On Oct 15, 1:01 pm, DLC dlcatft
Thank you, John. Does it work well? I am guessing it uses Broadcom
chipset?
Thank you,
Dana
On Oct 16, 5:16 pm, John Carmonne carmo...@aol.com wrote:
On Oct 16, 2011, at 2:13 PM, DLC wrote:
Thanks to all offering advice.
Okay, I am looking at this model here, just for comparison
Thank you, Peter! Much information (not more than I wanted, just more
than expected! :-)
I appreciate the effort and time to type it all up; it is indeed very
helpful.
Out of curiosity, the intended AirPort slot in my G5/PCI-E dual core:
is that really a mini-PCI-E slot?
Thanks again,
Dana
On Oct
And a thank you here also.
So, if I bought this card mentioned in my query (you indicate it is
a standard size), would I then by something like this?
http://www.amazon.com/MiniPCI-E-to-PCI-E-Wireless-Adapter/dp/B003MMY14Y/ref=pd_cp_e_1
And then I would be good to go?
Thank you again,
Dana
On
Greetings all,
I need some advice: I now have a PowerMac G5 DualCore 2.3GHz unit
(late 2005), one of the last models, and that uses the PCI-E
architecture.
I need to make it wireless for access to our home network printing.
However, I have come to find out that the special Airport Extreme/
Greetings all,
Am curious if anyone else has had this issue:
QuickSilver, Logic Board Rev. 2002, powered via an OWC 1.5GHz (single
CPU) Mercury, rev. 2 (fully compatible w/ OS 9.2.1 and 9.2.2,
according to their manual), - running OS 10.5.8 (wonderfully, I might
add) on one HD, and a successfully
Greetings all,
I have a graphics card issue here.
I am attempting to help a friend upgrade to leopard via his newly
acquired QuickSilver.
Earlier, he had purchased an NVidia GeForce Ti4600 128Mb Card (a 2x/4x
AGP according to specs) from a member of the SwapList. In his older
sawtooth, running
Greetings all,
I hope these are a couple of easy issues. I gave a G4 Dig. Audio to a
mac newbie, and he has been having a couple of questions. Here is a
quote from his latest response:
Hey,
Thanks for the reply and happy new year as well. I looked into the
locking issue. I found that if you press
Greetings all,
I little help in discerning a splash page on boot-up I've not seen
before. I gave my daughter an upgraded G4 Quicksilver (1.5GHz single
CPU, running leopard). It has an ATI Radeon card in it, a rather nice
one iirc, 9500, w/ 256Mb RAM.
She sent me a cell phone photo of a picture she
Hello gang,
Happy to post a query that is not list-nanny issue related :-)
I recently swapped for a G4 QuickSilver (800MHz DP/1.5Gb RAM, stock HD
and video-NVidia Twinview).
I installed a new copy of Tiger on the HD, upped it to 10.4.11 and off
I went - it operates perfectly fine except for one
*sigh* Hi all,
Sorry to be so thick about this, but I can't yet see how to get a hold
of specific List moms for a specific group list (I can get to Dan, but
how does one contact the specific list mom, or know who to reach?). I
am having specific difficulties with the Swap list and know not who to
Sorry to be a bit off-topic, gang.
What is the procedure (address) for contacting the list moms off-list?
I can't seem to find it on my Google page.
Thank you,
Dana
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a
Greetings all,
I have two G5 towers in our lab (1.8GHz DP-late 2004 models) running
10.5.8. They have both suddenly acquired the habit of not wanting to
shut down. When instructed, the Desktop dismounts, the Dock folds
down and then they just sit there. A force shutdown is what needs to
be done at
Greetings all,
Just need a little direction.
One of the G5s in our music lab (1.8GHz/DP/June 2004 model) recently
went through a nuke-and-pave (as Bruce likes to say :-),
putting a new copy of OS 10.5.8 on it.
Since then it does not like to wake up if it falls asleep (kind of the
opposite of the
Hi all,
Does anyone know how to de-authorize only one computer (out of the 5-
station quota) on an iTunes account? My wife reached her limit with a
new netbook a while ago - I bumped up her home office with a new (to
her) G5, which needs authorizing. So far, the only options I can find
are to
Greetings all,
I was able to move a spare G5 (1.8GHz, DP) from my school office to
home studio. At the office, sleep on the unit was not a luxury; now at
home it would be a nice feature. The G5 does not sleep; when I
manually put it to sleep, it goes through the motions to the point of
shitting
Greetings all,
Today I was blessed with a nice used late-model G5/2.3GHz Dual-Core
unit to use as a server in my office. This is one of the PCI-E models.
Everymac.Com states this about the PCI-E slots:
This model has two open full-length four-lane PCI Express slots,
and one open full-length
Greetings all,
I hope my description is accurate to the point that it rings a bell. I
do remember this being briefly chatted up on this list, but I can't
come up with the correct syntax to register a winning query. Here
goes:
I am putting a fresh install of OS X (Leopard) on a person's new (to-
Greetings all,
A quick question, please. My elderly friend still connects to the web
via dial-up. I give him a new (to him) G4/600MHz and internal modem
running Tiger on it.
He's asked me to come over and help him with his connections to
Localnet. Presuming that something in Network settings my be
Greetings all,
Hope this is the right place to ask this. Once upon a time (NOT too
long ago!), I was able to download any QT-based movie snip (news items
or instructional videos for software, for ex.) on Safari by simply
waiting for the page to load, then right-clicking the panel and a
save to
Greetings all.
A little assistance would be appreciated.
I have an office G5 running 10.5.8; attached via USB is the printer,
an HP Laser Jet P1505n.
Recently, the printer suddenly decided to NOT print but instead send
all requests to an ever-increasing queue list, with no intention of
ever
...which is a good one, but I started a new thread just to keep things
clean.
I like to BK my working OS (on my G5) using SuperDuper, which I've
done. However, I had a spare external FW drive that I tried Time
Machine on. It's been a little while, so tonight I may do it again.
However... the drive
Greetings all. I have a question for those who have dealt with an
adapter from Apple that is being sold these days.
We purchased a new Mac Pro and MacBook Pro recently. Both were to have
been provided with a Mini Display Port to DVI adapter
(not the former mini-DVI to DVI adapter) - they were, but
Greetings all,
Thanks to a perfect srorm of failure (electric power and UPS *argh!*),
my machine was shut down while my iPod touch was docked with iTunes
up, loading class audio files. Upon reboot, my iPod as stand alone
shows loss of all music and playlists. However, iTunes (on my office
G5)
Greetings, all.
Hope someone can offer some sage advice on this subject - this is the
second unit that such has happened to me:
I have an upgraded QuickSilver, 2002 motherboard, being processed with
a Sonnet G4/1 GHz single CPU, 1.5 Gig of RAM. The Sonnet firmware has
been upgraded to 3.2
Hi all,
Maybe this is an Apple joke.
Just had to do a fresh install of Leopard on a G5. After a couple of
glitches all went well.
Booted it up and launched Safari to download the 10.5.7 Combo update.
Ah! Was ist dieses ganz ungefähr? (what's all this, basically)-
My Safari is completely in German
54 matches
Mail list logo
