and the computer. Best of luck!
All the best,
Hal
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
guide
, different busses, hard drives from other G4s
and the best I can get now is a start-up lasting twice as long as
normal. Any ideas?
All the best,
Hal
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power
Hi,
I have seen two CPU model numbers for a Dual 1.25GHz CPU that goes
into the MDDs. One is 820-1470-A and the other is 820-1472-A. Is
either one designed specifically for the FW800 model? Thanks!
--
You received this message because you are a member of G-Group, a group for
those using
can remove resistors with a tweezer and trace new
connections with a circuit writer pen. It took me about 10 minutes to tweak my
CPU to run at 600, and it's working great. I may try 650mhz at some point, if I
get sufficiently bored.
Just my $0.02.
-Hal
--
You received this message because you
that sets the multiplier. You can remove resistors with a tweezer
and trace new connections with a circuit writer pen. It took me about 10
minutes to tweak my CPU to run at 600, and it's working great. I may try
650mhz at some point, if I get sufficiently bored.
Just my $0.02.
-Hal
Can you
? Thanks!
Hal
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
guide is at http://www.lowendmac.com/lists
On Dec 30, 2009, at 2:20 PM, Dana Collins wrote:
On Dec 29, 2009, at 10:25 PM, Hal wrote: Anyone have the experience with
their G5 where all 3 of...
I guess ignorance is bliss, Hal. My Firewire ports are AWOL as well on my G5
– no wonder I could not sync my 4th Gen. iPod via FW
on the display, though I haven't used them in a long time.
Any help is appreciated.
-Hal
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g
terabytes
worth of backup data?
Cheers,
-Hal
On Dec 29, 2009, at 10:25 PM, Hal wrote:
Anyone have the experience with their G5 where all 3 of the firewire ports (2
in back, 1 in front) all stop working?
Even with nothing connected to the firewire ports, when I go into system
profiler, I
On Dec 27, 2009, at 10:44 PM, Jason Brown wrote:
On 12/27/2009 8:47 PM, Hal wrote:
Thanks for the quick response.
I tried replacing the battery, and that seems to have cleared up some other
issues I was having (prolonged blue screen on boot up), but it didn't solve
the no video
On Dec 28, 2009, at 4:11 PM, Kris Tilford wrote:
On Dec 28, 2009, at 4:16 PM, Hal wrote:
Interestingly, I tried the open firmware procedure described above,
and when it rebooted, the screen stayed on the grey OF screen with
black text while the computer rebooted, with no display. It's
, 1280x1024 and
1680x1050. I'm using an Apple 23 aluminum HD display, and none of those shows
up on the display when I try selecting it.
Maybe the slot has gone bad? Is that possible? I pressed the reset button on
the logic board when I put the new battery in.
Any help is appreciated.
-Hal
On Dec
video cards,
the original PCIe 6600, as well as a flashed Radeon X1900.
If I tell it to shut down, and then start it up, it works fine.
Any ideas?
Thanks,
-Hal
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs
13 matches
Mail list logo
