I bought an apple usb modem off ebay for my emac, but ended up using it with
my macbook. Works great and no special drivers required. Here is the link
http://store.apple.com/us/product/MA034Z/A
On Thu, Nov 20, 2008 at 2:06 PM, Ernest L. Gunerius [EMAIL PROTECTED]wrote:
At 7:38 PM -0800
Try zapping the pram. turn it on and hold down (command-options-p-r)
On Fri, Nov 21, 2008 at 6:54 AM, Wallace Adrian D'Alessio
[EMAIL PROTECTED] wrote:
On Fri, Nov 21, 2008 at 12:25 AM, Bob [EMAIL PROTECTED] wrote:
Hi all,
My Quicksilver 2002 (upgraded to 1.8 GHz, 160 Gb HD, ATI
Also try booting into your computer from another mac using a firewire cable.
see if it has the same problem.
On Fri, Nov 21, 2008 at 10:05 AM, jonas ulrich [EMAIL PROTECTED]wrote:
Try zapping the pram. turn it on and hold down (command-options-p-r)
On Fri, Nov 21, 2008 at 6:54 AM, Wallace
I have a friend that has successfully over-clocked her beige g3, but with
the beige g3's there are pins you can move around to change the speed. With
a Yikes! i think that if you are only going to have to mess with the
processor and not the motherboard than go for it. But be prepared to replace
Have you tried testing your ram? Also try cleaning out your dimm slots
and processor slot with a can of compressed air.
On Fri, Nov 21, 2008 at 10:59 AM, Wallace Adrian D'Alessio
[EMAIL PROTECTED] wrote:
On Fri, Nov 21, 2008 at 1:19 PM, jonas ulrich [EMAIL PROTECTED]
wrote:
Also try
http://www.xlr8yourmac.com/G4ZONE/G4YIKESOC/ read this it tells how do oc a
Yikes! there have been reported failures...
On Fri, Nov 21, 2008 at 11:55 AM, jonas ulrich [EMAIL PROTECTED]wrote:
Oh i didn't know there is a jumper block I thought you had to remove
resisters like on the newer
I HATE windows networking. It is nothing but trouble. I had the same trouble
trying to connect from my mac to a pc and vice versa. Solution: Use all
macs!!!
On Mon, Nov 24, 2008 at 5:49 AM, Dennis Myhand [EMAIL PROTECTED] wrote:
Norm Rowe wrote:
OS 10.5.5 on PPC mac. Have a Compaq Laptop
I don't have a lot of experience with scsi... but try different jumper
settings on the scsi drive and or the ata.
On Mon, Nov 24, 2008 at 7:02 AM, insightinmind [EMAIL PROTECTED]wrote:
On Nov 24, 2008, at 9:19 AM, MnDel wrote:
Thanks, 4 replies already , what a group!
I took out card
Go to System PreferencesSharing and under select a service to change its
settings select Windows Sharing and click start. Then click Enable Account
and check in the account(s) that you want to use.
On Mon, Nov 24, 2008 at 7:01 PM, Dennis Myhand [EMAIL PROTECTED]wrote:
jonas ulrich wrote
a pc without a password! I was able to look through everything on the
computer from my laptop. it was awsome.
On Mon, Nov 24, 2008 at 7:18 PM, Dennis Myhand [EMAIL PROTECTED]wrote:
jonas ulrich wrote:
Go to System PreferencesSharing and under select a service to change
its settings select
I got a 366MHZ clamshell from someone for $3!! (I gave him a keyboard i
got for $3). He said it kept freezing up. the second ram chip was loose so i
reseted it and was able to install 10.2 on it without a glitch! Well... it
started freezing up. I put 10.3 on it, i cleaned out the ram slot,
If you're looking to replace the ram, you just need PC133U-333.
On Mon, Nov 24, 2008 at 7:37 PM, insightinmind [EMAIL PROTECTED]wrote:
On Nov 21, 2008, at 10:52 AM, Bruce Johnson wrote:
On Nov 21, 2008, at 8:32 AM, insightinmind wrote:
Having a slow startup problem, with a lengthy
It's just something to try... Also maybe zapping the pram can solve allot
of weird problems... turn the computer on and hold down Command Options P R
On Tue, Nov 25, 2008 at 1:44 PM, Bob Whiton [EMAIL PROTECTED] wrote:
jonas ulrich [EMAIL PROTECTED] wrote:
have you repaired disk permissions
]
wrote:
On Nov 24, 2008, at 8:39 PM, jonas ulrich wrote:
I got a 366MHZ clamshell from someone for $3!! (I gave him a
keyboard i
got for $3). He said it kept freezing up. the second ram chip was
loose so i
reseted it and was able to install 10.2 on it without a glitch!
Well
I have a powermac g4 DP 500MHZ gigabyte ethernet. I have been thinking about
upgrading the processors and video card. for about $500 on ebay you can get
a DP 1.8GHZ upgrade or for about $250 a single 1GHZ upgrade. for hard
drives: I was able to put two 80GB hard drives and one 250GB hard drive in
Did you try the add printer thing? I had something similar happen with my
hp. Try installing drivers for it if there is any.
On Thu, Nov 27, 2008 at 9:45 AM, Jasiu [EMAIL PROTECTED] wrote:
I have an 895c printer hooked up to my G4 Sawtooth. The printer is on
and connected. Yet when I try to
DO NOT GET A USB WIRELESS CARD. THEY SUCK. ok maybe not if you have usb 2.0.
I got an airport extreme compatible card for my Lombard (the model back from
the pismo) and it is fast and if fits in the PCMCIA slot so it's out of the
way as opposed to usb. I paid $20 on ebay for it.
On Thu, Nov 27,
I have a powerbook lombard 333MHZ. I put a new pram in it because it was
losing time. It seemed to hold the time fine until recently it no longer
holds the correct time. It has a bad main battery could this cause any
problems?
--~--~-~--~~~---~--~~
You received
Thanks but i think i solved it. According to apple the pram will only hold a
3-5 hour charge without being plugged in and without a main battery preset.
On Sat, Nov 29, 2008 at 1:42 PM, J.M.P.Hissel [EMAIL PROTECTED] wrote:
On 29-11-2008 21:32, jonas ulrich, [EMAIL PROTECTED], wrote:
I have
Classic will work great in 10.4. Also AppleWorks 6 will work perfectly in
10.4-Jonas
On Sat, Nov 29, 2008 at 8:57 PM, Anne Keller-Smith [EMAIL PROTECTED] wrote:
Just one last question, o wise ones ...
Will I still have Classic once I upgrade to 10.4?
I don't think I'll need it, but I'm not
Regarding installing AppleWorks 6 on OSX: You can't just take the OS9
AppleWorks 6 installer and install it on 10. If you have AppleWorks 6
installed on OS9 this is what you do to get it to run in OSX:
Simply drag folder from OS9 to your OSX applications folder and open it. I
use AppleWorks 6 on
I would get a QS 2002 it won't have the 128GB hard drive limit on it. It's a
lot less hassle because otherwise you have to buy this special driver to get
hard drives over 128GB to work.
On Mon, Dec 1, 2008 at 11:23 PM, Tom [EMAIL PROTECTED] wrote:
I have a G4 733 Digital Audio that I was
I have a gigabyte ethernet model with a 250GB hard drive. I had to use the
Speed Tools ATA High-Cap Driver. Works great!
On Tue, Dec 2, 2008 at 5:02 AM, Dennis Myhand [EMAIL PROTECTED] wrote:
dc wrote:
One other option is a SCSI controller card with a fast drive. I have
an ATTO card
Actually I used the Speed Tools ATA High-Cap Driver with the ata already on
the motherboard.-Joans
On Tue, Dec 2, 2008 at 10:24 AM, Len Gerstel [EMAIL PROTECTED] wrote:
On Mon, Dec 1, 2008 at 11:23 PM, Tom [EMAIL PROTECTED] wrote:
I have a G4 733 Digital Audio that I was setting up to give
You definitely have to have ram before you do anything. You can download a
copy of the Apple Hardware test disc from the apple website.-Jonas
On Wed, Dec 3, 2008 at 10:40 AM, Kris Tilford [EMAIL PROTECTED] wrote:
On Dec 3, 2008, at 12:14 PM, Maestro_T wrote:
In the wonderful world of PC's,
I just got a Digital Audio single 533MHZ powermac for $25 on craigslist. I
know that Apple made a dual processor version of this same powermac. Can i
put dual 533MHZ processors in it?-Jonas
--~--~-~--~~~---~--~~
You received this message because you are subscribed
Maybe you just got a bad copy of 10.4. I have run 10.4 for on a G3 imac, G3
powermac, two G3 ibooks, two G4 powerbooks, two G4 powermacs and a G4 emac.
They all run perfectly. My guess is that you just got a bad 10.4 installer.
You might also want to see if you have the latest firmware version for
Tiger will run great. But leopard will run like crap. I used the leopard
assist thing on my digital audio 533MHZ. Once I started doing more than one
thing it got ow. Don't run leopard
-Jonas
On Tue, Dec 16, 2008 at 12:41 PM, joe j...@joethejuggler.com
Hi. I just bought a DVD card for my PowerBook G3 Lombard 333MHZ. I can play
DVDs great in OS9, but I would like to find a way to play them in OS10. Does
anyone know of any programs that will do that? Thanks!-Jonas
--~--~-~--~~~---~--~~
You received this message
There are some simple tests that you can perform. Get a firewire cable
and connect to another mac. Then from the other mac boot into the powerbooks
hard drive. If you still just get the grey screen than it's probably just
the hard drive cable.-Jonas
On Wed, Dec 17, 2008 at 11:57 AM, nestamicky
Get a new optical drive. The old ones suck anyways. I have two powermac g4's
both with stock apple DVD drives. Both of these drives will read DVDs, just
not cd's very well.-Jonas
On Sat, Dec 20, 2008 at 10:39 PM, Kris Tilford ktilfo...@cox.net wrote:
On Dec 21, 2008, at 12:14 AM, Paul wrote:
Well if you can't access the hard drive through firewire from another mac,
then I think it is the hard drive cable. I have the exact same laptop and I
think it is worth fixing. How much does it cost?-Jonas
On Mon, Dec 22, 2008 at 12:00 PM, nestamicky nestami...@gmail.com wrote:
jonas ulrich
I had a tibook 2002 for about a week before I returned it with a bad mother
board. When you say it doesn't give a beep are you talking about the apple
chime? Does it even get power? These laptops were very inconsistent. Some of
them will overheat and melt as shown in the five links.
.
http://www.bitssite.com/apple-powerbook-g4-400mhz-15-2-inch-mercury-tibook-titanium-m7710ll-a/3072/us-110v-power-adapter/accessory.html
-Jonas
On Tue, Dec 23, 2008 at 6:55 PM, Charles Lenington macso...@brightok.netwrote:
nestamicky wrote:
jonas ulrich wrote:
I had a tibook 2002 for about
What exactly is quarts extreme?
On Wed, Dec 24, 2008 at 6:37 PM, Kris Tilford ktilfo...@cox.net wrote:
On Dec 24, 2008, at 8:33 PM, jonas ulrich wrote:
As long as there is enough free ports. I ran 2 pci video cards a 1
agp video card in my G4 gigabyte ethernet powermac.
Using a PCI
I have a 533MHZ G4 PowerMac with a 133MHZ bus speed and 3 dimm slots. I also
have a Dual 500MHZ PowerMac G4 with a 100MHZ bus speed and 4 dimm slots. I
want to run one of these with Mac OS 10.4 Server. Which will offer me the
most expandability and speed? Thanks!-Jonas
This happened to me just the other day on my DP500MHZ. I unplugged it and
plugged it back in and it worked.-Jonas
On Sat, Dec 27, 2008 at 11:46 AM, Kris Tilford ktilfo...@cox.net wrote:
On Dec 27, 2008, at 10:51 AM, Aaron wrote:
My FireWire 800 MDD chimes once when I try to start it, and
I have heard that there are two types of quicksilvers, the 2001 and the
2002. I heard that the 2002 didn't have the 128GB hard drive limit and the
2001 did? is this true? how do i know which is the 2002?-Jonas
--~--~-~--~~~---~--~~
You received this message because
I am looking to buy a powermac 2002 or later i don't care if it has ram or
hard drive. just as long as it has a motherboard and power supply and works.
-Jonas
--~--~-~--~~~---~--~~
You received this message because you are subscribed Low End Mac's G3-5 List, a
Definitely don't upgrade to 10.5. It will run like crap.
On 12/30/08, Fabian Fang f...@mac.com wrote:
On Dec 30, 2008, at 5:57 PM, rmwoods wrote:
Although I have been using Mac for years, I am not expert enough to
know what kind of g4 (I think) I now have. The :About this Mac specs
Xpostfacto on beige g3's have always had video problems. Definitely get a
PCI video card. I have a beige g3 with a 16mb PCI video card, a G4 500MHZ
sonnet upgrade processor, with a 40GB hard drive running mac os 10.3.9. Runs
great and without the video problems that come with the original video
I'm pretty sure that there was 450MHZ Yikes!-Jonas
On Wed, Dec 31, 2008 at 2:38 PM, Kris Tilford ktilfo...@cox.net wrote:
On Dec 30, 2008, at 7:57 PM, rmwoods wrote:
Hardware Overview:
Machine Name:Power Mac G4
Machine Model: PowerMac3,3
CPU Type:PowerPC G4
, at 2:15 AM, jonas ulrich wrote:
I have a 533MHZ G4 PowerMac with a 133MHZ bus speed and 3 dimm
slots. I also have a Dual 500MHZ PowerMac G4 with a 100MHZ bus
speed and 4 dimm slots. I want to run one of these with Mac OS 10.4
Server. Which will offer me the most expandability and speed
I was wondering if it is possible to put a quicksilver mother board in a
digital audio case? thanks!!-Jonas
--~--~-~--~~~---~--~~
You received this message because you are subscribed Low End Mac's G3-5 List, a
group for those using G3, G4, and G5 desktop Macs
I have an external DVD Burner that for some reason will only read and burn
dvds connected through USB to my Powermac G4. I can play dvds from it on
other computers that have internal dvd drives, but not mine because I have
an internal CD RW drive. DVD player just says there is no supported dvd
On this particular machine I haven't ran the update since I installed. I did
install a predownloaded 10.4.11 update and an itunes 7 update. I think I
have solved the problem though. I just bought a DL DVD RW drive at a local
computer recycler for $15. I used patch-burn and it works great!
I just bought a Powerbook G4 15 1.67ghz knowing that it has some physical
damage, mainly dents and scratches. What I am just now finding out is that
the screen doesn't sit perfectly and when you close the screen the laptop
stays running and doesn't go on sleep. How does the laptop know when the
Thats funny.:-) Looks like a slot loading G3 imac.-Jonas
On Fri, Jan 9, 2009 at 12:05 AM, KP parishky...@gmail.com wrote:
I thought all of you would appreciate seeing the G3 on the bottom of
Car Talks web-site. http://www.cartalk.com/content/features/carbon/
I think it's funny that
The mdd's have large drive support, they are not affected by any hard drive
limit. I am not sure though if os9 has a hd size limit. If it does you will
just need to partition using os9 and make sure that os 9 will be able to see
both partitions. Then you can install 10. Just make sure to install 9
I just found this case on ebay. says its for mac/pc what do you think?
http://cgi.ebay.com/3-5-USB-2-0-1394-FIREWIRE-HD-ENCLOSURE-CASE-BLACK_W0QQitemZ5127087778QQcmdZViewItemQQptZPCC_Drives_Storage_Internal?_trksid=p3286.m20.l1116
On 1/9/09, jonas ulrich jonasulrich3...@gmail.com wrote:
When
http://eshop.macsales.com/item/Other%20World%20Computing/NP35FW/
Is this a good drive case to buy?
-Jonas
On 1/9/09, Kris Tilford ktilfo...@cox.net wrote:
On Jan 9, 2009, at 11:25 PM, jonas ulrich wrote:
I just found this case on ebay. says its for mac/pc what do you
think?
http
Hey thanks for all your input. I went ahead and bought:
http://eshop.macsales.com/item/Other%20World%20Computing/MEFW911UPLOB/
Thanks
-Jonas
On 1/11/09, Kris Tilford ktilfo...@cox.net wrote:
On Jan 11, 2009, at 4:58 AM, yawg wrote:
My other two have Initio-controllers and used to
I have a powermac g4 running mac os 10.4 server. I have several hard
drives in this machine, and i cannot acces them over the network
through file sharing. When i was running the plain mac os 10.4 i could
access all the hard drives. How can i access the other hard drives
through file sharing
Hey if you end up getting rid of that G4 tower I might buy it from you...
On Tue, Jan 13, 2009 at 7:42 AM, Sam Macomber s...@macomber.com wrote:
On Jan 13, 2009, at 9:46 AM, Charles Lenington wrote:
Sam Macomber wrote:
On Jan 5, 2009, at 3:12 PM, Sam Macomber wrote:
On Jan 5,
Oh my bad. Are you getting rid of the emac?-Jonas
On Tue, Jan 13, 2009 at 6:25 PM, Sam Macomber s...@macomber.com wrote:
Hey if you end up getting rid of that G4 tower I might buy it from you...
I have a 700MHz eMac, I was just considering getting a G4 tower. Decided
to go with a new
I have used printer sharing with tiger before but not with server. When i go
to the printer and fax settings there is no sharing tab. How do I share my
printer??-Jonas
--~--~-~--~~~---~--~~
You received this message because you are subscribed Low End Mac's G3-5
Thanks but i already tried that. nothing-Jonas
On Fri, Jan 16, 2009 at 12:36 PM, Kris Tilford ktilfo...@cox.net wrote:
On Jan 16, 2009, at 2:27 PM, jonas ulrich wrote:
I have used printer sharing with tiger before but not with server.
When i go to the printer and fax settings
So how can I just share the printer on my private network?-Jonas
On Fri, Jan 16, 2009 at 4:13 PM, Bruce Johnson john...@pharmacy.arizona.edu
wrote:
On Jan 16, 2009, at 1:27 PM, jonas ulrich wrote:
I have used printer sharing with tiger before but not with server.
When i go
Hey thanks everyone! I figured it out. It's under server admin. I have to
set up the print service there. Thanks!-Jonas
On Sat, Jan 17, 2009 at 12:33 PM, Bruce Johnson
john...@pharmacy.arizona.edu wrote:
On Jan 16, 2009, at 5:39 PM, jonas ulrich wrote:
So how can I just share the printer
My first Beige g3 minitower worked great with the tv as its only monitor. I
thing there might be a key you press at startup. There also might be an
extension. How fast is the computer? The older beige g3s had and older video
card that made the video inputs and outputs look like crap. However, the
would be a natural for this with its
personality card, but had no idea there'd be all these roadblocks!
Andy
On Jan 21, 1:34 pm, jonas ulrich jonasulrich3...@gmail.com wrote:
My first Beige g3 minitower worked great with the tv as its only monitor.
I
thing there might be a key you press
Hey on friday I will try plugging my minitower into the tv and see what
happens. You might try upgrading to mac os 9.2.2-Jonas
On Thu, Jan 22, 2009 at 6:42 AM, mythmaker18 mythmake...@yahoo.com wrote:
Actually, I have an XClaim VR128 in my old, G4-accelerated 7500 in the
basement (which used
I just obtained a Kensington StudioMouse Wireless mouse and it makes a high
pitched whining noise. Can this be stopped?-Jonas
--~--~-~--~~~---~--~~
You received this message because you are subscribed Low End Mac's G3-5 List, a
group for those using G3, G4, and G5
The batteries are new and inserted correctly. The mouse works great. It's
just the whining noise.-Jonas
On Mon, Jan 26, 2009 at 5:21 AM, insightinmind billycarm...@verizon.netwrote:
More Seriously: Are its batteries inserted in the right direction?
*Bill Connelly*
*artsite:*
Dban works great on pc's. I use it at work. I didn't even know that there
was a version that supposedly worked on ppc. What about booting into a
flavor of linux to format drives?-Jonas
On Mon, Jan 26, 2009 at 9:19 PM, Brian Christmas b...@tpg.com.au wrote:
On 27/01/2009, at 4:07 PM, Bruce
I am looking for a good dvd ripping software that will rip tv shows. I've
tried handbrake mactheripper.-Jonas
--~--~-~--~~~---~--~~
You received this message because you are subscribed Low End Mac's G3-5 List, a
group for those using G3, G4, and G5 desktop Macs -
Those beige g3's are freakin awesome because of all the video inputs and
outputs. I have 4 beige g3's. The minitowers are the best though...
On Wed, Jan 28, 2009 at 1:47 PM, Bruce Johnson john...@pharmacy.arizona.edu
wrote:
On Jan 28, 2009, at 12:21 PM, rogerthebasspla...@gmail.com wrote:
I don't think thats what bruce is talking about. It sounds like he wants the
boot menu to come up as soon as he turns the computer on. Basically instead
of holding down the options key to see bootable volumes, just make it
automatically go there.-Jonas
On Thu, Jan 29, 2009 at 10:43 AM, Charles
Definitely go for the Digital Audio Powermac with the 133MHZ bus speed.
-Jonas
On Fri, Jan 30, 2009 at 9:35 PM, PeterH peterh5...@rattlebrain.com wrote:
On Jan 30, 2009, at 8:45 PM, tortoise wrote:
I just got this 1.5ghz cpu for my sawtooth and am enjoying it.
I am wondering since the
, jonas ulrich jonasulrich3...@gmail.com* wrote:
From: jonas ulrich jonasulrich3...@gmail.com
Subject: Re: Sawtooth vs DA/QuickSilver
To: g3-5-list@googlegroups.com
Date: Monday, February 2, 2009, 12:34 PM
Definitely go for the Digital Audio Powermac with the 133MHZ bus speed.
-Jonas
On Fri
I am looking for a manual that will tell me how to replace the cd drive in
my G3 iBook 800MHZ 12 thanks!!!-Jonas
--~--~-~--~~~---~--~~
You received this message because you are subscribed Low End Mac's G3-5 List, a
group for those using G3, G4, and G5 desktop Macs
This is driving me insane. I set the icon view on a certain folder and then
click all windows and then I go to another folder and the view is
different-Jonas
--~--~-~--~~~---~--~~
You received this message because you are subscribed Low End Mac's G3-5 List,
It doesn't matter. Even if I do that it doesn't matter. I've tried repairing
permissions and nothing helps.-Jonas
On Thu, Feb 5, 2009 at 12:47 PM, Clark Martin cm...@sonic.net wrote:
jonas ulrich wrote:
This is driving me insane. I set the icon view on a certain folder and
then click all
I found this test quite interesting. Me and my sister are addicted to a tv
show called Prison Break. She owns the first two seasons, so I decided to
make backup copies on my computer via Handbrake. There are so many discs
that I decided to get four computers together and rip one disc on each. I
It is possible that I am looking for a powermac G4, something with DP
processors or capable. Let me know if you have any working/nonworking
powermacs and or parts to sell. Thanks!-Jonas
On Mon, Feb 9, 2009 at 12:29 PM, Len Gerstel lgers...@gmail.com wrote:
On Feb 9, 2009, at 3:24 PM,
OS10 server is a whole new deal. I would recommend 10.4 Server. I found it
on the pirate bay with an unlimited serial number and it works great. I was
able to find different manuals online. look on ebay for documentation.-Jonas
On Sun, Feb 8, 2009 at 11:50 PM, Nathan T. Templeton pb2...@gci.net
What is Deinterlacing?-Jonas
On Mon, Feb 9, 2009 at 3:11 PM, insightinmind billycarm...@verizon.netwrote:
Deinterlacing Set / Not Set can make a big difference when using DVD
Player.
Bill Connelly
artsite: http://mysite.verizon.net/moonstoneartstudio
myspace:
the link isn't working. how do i get it off the mac update?
On 2/22/09, Steve R mailing.lists.2...@gmail.com wrote:
At 11:32 PM -0500 2/22/09, Dana Collins posted:
On 2/22/09 10:45 PM, jonas ulrich of jonasulrich3...@gmail.com sent
How do you upgrade firmware on a blue and whiter
every single bloody download link doesn't work!!! at 94k
through it says the decompression failed
On 2/22/09, Steve R mailing.lists.2...@gmail.com wrote:
At 10:26 PM -0800 2/22/09, jonas ulrich posted:
the link isn't working. how do i get it off the mac update?
On 2/22
...@cox.net wrote:
On Feb 23, 2009, at 1:09 AM, jonas ulrich wrote:
every single bloody download link doesn't work!!! at 94k
through it says the decompression failed
Try either of these:
http://eshop.macsales.com/Tech/FTP/newertech/BWG4Enabler.hqx
or
http
I have a 366MHZ firewire clamshell that i cheaply acquired. It will
only startup in safe boot in 9.2, 10.2, 10.3, 10.4. It passed the
apple hardware test and i put in a new ram chip but no change.
-Jonas
--~--~-~--~~~---~--~~
You received this message because you
Ram is not the issue. I have tried taking the extra pc 100 chip out,
and replacing it with another.
On 2/23/09, Trinette Rani Johnson trin...@macgui.com wrote:
What kind of RAM exactly? It could be an issue.
On Feb 23, 2009, at 7:02 PM, jonas ulrich wrote:
I have a 366MHZ firewire
is that you might have a short
in the keyboard, which makes it think the shift key is being held
down. You might try unplugging the keyboard (I don't know how easy it
is?) Another thing you might try is reinstalling the OS (OS's?) on
it.
-Cyrus
On Feb 23, 5:40 pm, jonas ulrich
I meant that i tried running those os's. I'm currently running tiger.
I tried what you suggested, but as usual it started up without safe
boot but immediately froze up.
-Jonas
On 2/23/09, Kris Tilford ktilfo...@cox.net wrote:
On Feb 23, 2009, at 9:39 PM, jonas ulrich wrote:
The keyboard
How do you do that? Are you saying to hold down those keys at startup?
-Jonas
On 2/23/09, Kris Tilford ktilfo...@cox.net wrote:
On Feb 24, 2009, at 1:11 AM, jonas ulrich wrote:
I meant that i tried running those os's. I'm currently running tiger.
I tried what you suggested, but as usual
try hitting the reset button on the mother board. also clean ram and
processor slots.-Jonas
On Thu, Feb 26, 2009 at 2:37 PM, Cyrus callmemrp...@gmail.com wrote:
Another thing to check is the voltage specifier on the powersupply,
(little red switch next to where the cord goes in) it might have
When you say you can't get past the screen are you saying that it freezes
up? If so have you tried just letting it sit and see if it will eventualy
load? Sometimes that works for me.
-Jonas
On Tue, Mar 3, 2009 at 5:43 AM, saxman_IN thbarn...@tds.net wrote:
I have an old BW G3 that I am in the
I have worked on my two Lombards. Just the other day I put in more ram which
required removing the processor, and the connection is completely different
from the picture on ebay. There were upgrade cards made, but i don't know
how fast they were, and that isn't one for a lombard.
-Jonas
On Wed,
Bruce, are you looking for a motherboard for a lombard? I have a lombard or
two that I could sell you.
-Jonas
On Wed, Mar 4, 2009 at 10:55 AM, PeterH peterh5...@rattlebrain.com wrote:
On Mar 4, 2009, at 10:25 AM, Bruce - in Orlando wrote:
I see on ebay right now there is a 500 mhz CPU
maybe your installation disc is screwed up... whenever I install 10.4 it
will usually freeze for a minute or so at one of those setup screens... what
about firmware updates for the blue and white?
-Jonas
On Wed, Mar 4, 2009 at 7:33 AM, saxman_IN thbarn...@tds.net wrote:
When you say you
I'm not sure other than hardware what the issue could be. I have 3 mother
boards from those imacs with cd drives that i could sell you. they're
actually the whole tray.-Jonas
On Sat, Mar 7, 2009 at 9:33 PM, Cyrus callmemrp...@gmail.com wrote:
Hi everyone, I recently recieved an original Bondi
You're going to end up paying 400-500 dollars for an upgrade like that. It's
not worth it.-Jonas
On Mon, Mar 9, 2009 at 7:02 PM, mark ray bluellama...@embarqmail.comwrote:
So she meets 2 out of 3. Unfortunately, the one she does not even come
close to is the most important here, and that is
i have had plenty of g3 imacs all with different upgraded hard drives. I had
one that I would leave on for weeks on end. Never a problem.-Jonas
On Tue, Mar 10, 2009 at 12:27 PM, Clark Martin cm...@sonic.net wrote:
mythmaker18 wrote:
Thanks, Clark. I just wanted to be sure, since I remember
I am looking to upgrade my numerous existing powermac g4s and g3s with one
good powermac. I want dual processors. I have looked at the quicksilvers and
the MDD's. What would be the best one for my money. I will be running mac os
10.4 server.-Jonas
I have heard about the 733 qs that because of the cache they run at about
533mhz. Is this true of the 800MHZ?-Jonas
On Wed, Mar 11, 2009 at 4:32 PM, PeterH peterh5...@rattlebrain.com wrote:
On Mar 11, 2009, at 4:08 PM, jonas ulrich wrote:
I am looking to upgrade my numerous existing
I am looking at a dual 1ghz on ebay for $200 free shipping. Good deal? Will
this one have cache?-Jonas
On Wed, Mar 11, 2009 at 6:09 PM, Len Gerstel lgers...@gmail.com wrote:
On Mar 11, 2009, at 9:05 PM, jonas ulrich wrote:
I have heard about the 733 qs that because of the cache they run
The reason I am avoiding the MDD's is because they are freaking expensive!
I probably won't be doing processor upgrades. I want one with the large
drive support and the L3 cache unlike the early quicksilvers.-Jonas
On Wed, Mar 11, 2009 at 9:17 PM, mythmaker18 mythmake...@yahoo.com wrote:
This is the one I'm considering...
http://cgi.ebay.com/Apple-Power-Mac-G4-Tower-Dual-1GHz-80Gb-256Mb-DVD-M8493_W0QQitemZ200318740846QQihZ010QQcategoryZ111418QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Is this a good deal?
-Jonas
On Wed, Mar 11, 2009 at 9:28 PM, jonas ulrich jonasulrich3
Depending on what people say, I'm going to buy the dual 1ghz quicksilver
that i listed above.-Jonas
On Wed, Mar 11, 2009 at 9:37 PM, George R. Hozendorf ghoze...@gmail.comwrote:
On Mar 11, 2009, at 11:15 PM, mythmaker18 wrote:
On Mar 11, 9:05 pm, jonas ulrich jonasulrich3
Question: I am looking at another Dual 1 ghz powermac quicksilver. In the
picture i can see the computer says 1mb L3 chache per processor. I thought
those had 2mb cach?-Jonas
On Thu, Mar 12, 2009 at 12:15 PM, jonas ulrich jonasulrich3...@gmail.comwrote:
Yeah I have thought about a hackintosh
1 - 100 of 374 matches
Mail list logo
