On Saturday 15 November 2003 15:47, Robert Jewell wrote:
I recently upgraded to 2.6.. i used the -mm sources, beta9-r2 or so. my
nvidia works.. kde works.. the system is quick and responsive. no
problems at all with 2.6 .. the mm sources have nvidia patches, i believe.
The other way
i think you have ipv6 enabled. you need to turn it off.
kind regards
anupam
Thomas T. Veldhouse [EMAIL PROTECTED] writes:
I did a recent sync and wget was updated to version 1.9. Now, when it tries
to pull any source down from any location, I get the message Address family
not supported
I'm using grub-static as my boot loader. My boot partition is /dev/sda1
and grub is installed to the MBR. I get to the grub prompt fine, but
when the kernel starts, the error kernel panic: could not read device
/dev/sda1 followed by please append correct root= option and then
VFS: could not
On Sunday 16 November 2003 16:08, KamaolaKid wrote:
I'm using grub-static as my boot loader. My boot partition is /dev/sda1
and grub is installed to the MBR. I get to the grub prompt fine, but
when the kernel starts, the error kernel panic: could not read device
/dev/sda1 followed by please
Firstly, you should put root=root device and not root=boot device.
Valid point, however, in my case they are one in the same.
Secondly, it sounds like the kernel cannot find your scsi device
(assuming you
do have scsi) so you probably don't have the correct driver
compiled into the
On Sunday 16 November 2003 16:36, KamaolaKid wrote:
Secondly, it sounds like the kernel cannot find your scsi device
(assuming you do have scsi) so you probably don't have the correct driver
compiled into the kernel.
The hard drive is a western digital SATA raptor with a VIA SATA chipset.
Hello everyone,
I decided not to use emacs, so i unmerged both
emacs and openmotif from my box.
Now when i enter 'emerge -p -u system', both are
listed as new download (N), while 'qpkg -I -q emacs'
returns absolutely nothing. 'make depclean' already
executed. (I also removed them from
On Saturday 15 November 2003 17:34, Oliver Lange wrote:
Now when i enter 'emerge -p -u system', both are
listed as new download (N), while 'qpkg -I -q emacs'
returns absolutely nothing. 'make depclean' already
executed. (I also removed them from /var/cache/edb/world,
but updating the system
Hi all,
I've just emerged sync and then I did:
euler root # emerge -up --deep world
These are the packages that I would merge, in order:
Calculating world dependencies \
emerge: there are no masked or unmasked ebuilds to satisfy
sys-apps/bzip2.
!!! Problem with ebuild dev-php/mod_php-4.3.4
The upgrade is something we used to do on solaris boxes, it's about
applying patches, or installing software.
When we did that, we disconnected one side of the mirror, then did the
upgrade/patch/install. If it went fine, we resynced the mirrors as
normal, but on failure, we resynced from the
Hi all,
I've tried to run portage master but I had an exception:
euler root # portagemaster
Exception in thread main java.lang.ArrayIndexOutOfBoundsException: 100
at logic.Helper.getCategories(Unknown Source)
at fsl.FileFilter.init(Unknown Source)
at
Hi
I was wondering if it is possible to start an X program for instance
xMule and then logout to let somebody else login and let him do his
work, while xMule is still running.
Thanx
--
[EMAIL PROTECTED] mailing list
Paulo,
This is caused when emerge needs a certain package to create the
dependency graph for all packages in your world and that package is
masked for whatever reason. The package may be masked for the version
you need to build mod_php_4.3.4 (check /usr/portage/sys-apps/bzip2) or
the
Hi,
I've already posted earlier (and in other lists with no answer) with a
problem using the ls program...
$ cd /
$ ls -la *
snip
Segmentation fault
And sometimes it even blocks...
So I investigated a little bit and I removed the initrd.gz from lilo,
meaning removed the policy
Hi all,
I've tried to emerge texpower but after:
euler root # emerge texpower
Calculating dependencies ...done!
emerge (1 of 1) dev-tex/texpower-0.0.9d to /
md5 src_uri ;-) texpower-0.0.9d.tar.gz
md5 src_uri ;-) texpower-doc-pdf-0.0.9d.tar.gz
Unpacking source...
Unpacking
On Sat, 15 Nov 2003 12:59:45 +0100
humbaba [EMAIL PROTECTED] wrote:
Hi
I was wondering if it is possible to start an X program for instance
xMule and then logout to let somebody else login and let him do his
work, while xMule is still running.
Yes.
Go to a console screen (Ctrl+Alt+F2 for
Run it in a vnc session. Multiple logins at the same time, remote or
local, or via tunnel (ssh or zebedee), even over a modem.
I run long term GUI jobs in a vnc session, then can log in from where
ever and check on them. Screen works well for consoles, but vnc can be a
lot more flexible.
BillK
I had this problem a few days back, tried everything to fix it and came
up with nothing, but the problem mysteriously went away the next day.
amsn never failed to work,
sorry I can't help,
but you're not going mad,
good luck,
Joel.
On Thu, 2003-11-13 at 10:26, Jose Gonzalez Gomez wrote:
edit ebuild and change it to app-arch/bzip2
On Sat, 2003-11-15 at 07:24, Klaus Neumann wrote:
Hi,
trying to emerge phprojekt, I got this:
bash-2.05b# emerge -pv phprojekt
These are the packages that I would merge, in order:
Calculating dependencies \
emerge: there are no masked or
On Saturday 15 November 2003 06.12, Mark Knecht wrote:
Anyway, the DontZap option seems to work fine, so it's my learning bug
and not a real problem I guess...
But, afaik, it will still be possible to ctrl+alt+f1 (or another f-key if
you're logged into another vc) and ctrl+c or ctrl+z your
Could someone let me know how to get gdm to run?
I just installed gentoo on a laptop a few days ago and
gdm fails to start. It's reporting the error that it cannot
find liblinc.so.1.
I ran 'emerge sync' followed by 'emerge -u world'
hoping to straighten it out but that didn't work.
I'm not
I ran 'emerge sync' and picked up a new kernel source package
automatically. I noticed that it was upacked in /usr/src but not
compiled.
I'm running genkernel now to build the kernel image and
modules.
My question is ... all of the add on module packages ...
are they auto-detected and built by
-- quoting keanu --
On Wednesday 29 October 2003 21:16, Ian Truelsen wrote:
Has anyone managed to get Internet Exploder to install under Linux? I
want to be able to test web pages without booting into Windows.
begin quote
On Sat, 15 Nov 2003 08:33:52 -0500
Heitzso [EMAIL PROTECTED] wrote:
Could someone let me know how to get gdm to run?
I just installed gentoo on a laptop a few days ago and
gdm fails to start. It's reporting the error that it cannot
find liblinc.so.1.
I ran 'emerge sync'
Could someone please confirm what I think I'm seeing?
Along with perhaps 20 other packages when I did:
# emerge -UDp world
I see this:
[blocks B ] kde-base/kdelibs-3.1.4 (from pkg
x11-libs/qt-3.2.2-r1)
[ebuild U ] x11-libs/qt-3.2.2-r1 [3.1.2-r4]
If I read this correctly, I need to
Paulo Jorge de Oliveira Cantante de Matos wrote:
Hi all,
I've just emerged sync and then I did:
euler root # emerge -up --deep world
These are the packages that I would merge, in order:
Calculating world dependencies \
emerge: there are no masked or unmasked ebuilds to satisfy
sys-apps/bzip2.
[blocks B ] kde-base/kdelibs-3.1.4 (from pkg
x11-libs/qt-3.2.2-r1)
[ebuild U ] x11-libs/qt-3.2.2-r1 [3.1.2-r4]
If I read this correctly, I need to unmerge kdelibs-3.1.4 before I can
update qt to 3.2.2-r1
Is this correct?
No, unfortunately this is a weird thing, anf it's brought
Hi all,
I've been running Gentoo for about 6 months now, and am fabulously
impressed by it. Case in point:
I emerged the XFCE-4.0.1 bugfix release and restarted X. There was a
long pause and XFCE informed me (something like) 'Your window manager
doesn't support window hints. Some XFCE functions
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
hi there.
i've tried kernel 2.6.0-beta9-gentoo because of having an i875 chipset. i use
a nvidia geforce 2 mx 400 card.
i've tried out 2 ways of getting the correct nvidia-driver, as first
downloading NVIDIA-Linux-x86-1.0-4496-pkg2.tar.gz from
I re-emerged gdm and it's now working. Thanks.
Spider wrote:
begin quote
On Sat, 15 Nov 2003 08:33:52 -0500
Heitzso [EMAIL PROTECTED] wrote:
Could someone let me know how to get gdm to run?
I just installed gentoo on a laptop a few days ago and
gdm fails to start. It's reporting the error
I'm using a MS wireless mouse with Gentoo and Caldera. It works but the only
issue I have with it is that sometimes when I click on something it doesn't
see the click. I have to click harder or several more times. The receiver
is within three feet of the mouse so I'm not sure what's going
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 15 November 2003 17:25, Marcin Daczkowski wrote:
hello
my mouse i dieing. i've counted money and thought it would be quite good
idea to but wireless mouse (and keyboard). I was thinking about creative
one (i do not remeber full name,
On Saturday 15 November 2003 10:07 am, Sigurd Stordal wrote:
[blocks B ] kde-base/kdelibs-3.1.4 (from pkg
x11-libs/qt-3.2.2-r1)
[ebuild U ] x11-libs/qt-3.2.2-r1 [3.1.2-r4]
If I read this correctly, I need to unmerge kdelibs-3.1.4 before
I can update qt to 3.2.2-r1
Is this
On Sunday 16 November 2003 02:40, Brett I. Holcomb wrote:
I'm using a MS wireless mouse with Gentoo and Caldera.
Hehhe, OT but... I wouldn't want to mention Caldera around here. Didn't you
know Caldera is a subsidiary of SCO? ;-)
Jason
--
[EMAIL PROTECTED] mailing list
On Sat, 15 Nov 2003 00:41:11 -0600
Andrew Gaffney [EMAIL PROTECTED] wrote:
Klaus Neumann wrote:
Hi,
trying to emerge phprojekt, I got this:
bash-2.05b# emerge -pv phprojekt
These are the packages that I would merge, in order:
Calculating dependencies \
emerge: there are no
On Sat, 15 Nov 2003 14:13:40 +0100
Redeeman [EMAIL PROTECTED] wrote:
edit ebuild and change it to app-arch/bzip2
Your instructions are a little brief. You mean I shall edit the file
/usr/portage/app-office/phprojekt/phprojekt-4.0-r1.ebuild
and change what to app-arch/bzip2? I don't see any
Freitag, 14. November 2003 09:46
successfully booting the livecd 2.6.0-gss, Nov 5,
- experimental/x86/livecd/livecd-2.6_11-05-2003.iso -
I've seen working all the 3 most important items I wanted to have:
- tigon3 network card support
- sata via support
- strong cryptography
then I've
On Sat, 15 Nov 2003 17:35:35 +
Mike Williams [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 15 November 2003 17:25, Marcin Daczkowski wrote:
hello
my mouse i dieing. i've counted money and thought it would be quite
good idea to but wireless
i thought about that too, but if he want, let him, use crossover office
On Sat, 2003-11-15 at 19:24, SN wrote:
Damn, why would you want IE??
I have banned IE even on windows.
- Original Message -
From: Matthias F. Brandstetter [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc:
I bought it when they were Caldera G. Gee, maybe they'll want me to pay a
license fee! The Caldera box was set up to be my working box back before we
knew Caldera was going to stiff it's users. It is being replaced by a Gentoo
box but unfortunately I'm not ready to make the switch yet. The
On Sat, 2003-11-15 at 10:48, Christian Fischer wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
hi there.
i've tried kernel 2.6.0-beta9-gentoo because of having an i875 chipset. i use
a nvidia geforce 2 mx 400 card.
i've tried out 2 ways of getting the correct nvidia-driver, as
I get this error:
sc3u: relocation error: sc3u: symbol _dl_global_scope, version GLIBC_2.0 not
defined in file ld-linux.so.2 with link time reference
How do I correct?
--
Venlig hilsen / Greetings from
Claus L. Wilson, Linux gentoo1.4
Sdr. Boulevard 226, st.tv
5000 Odense C
tlf. 66191050 /
On Thursday 13 November 2003 10:23 pm, Chris I wrote:
On 2003.11.13 22:40, Bryce wrote:
Hi All. I've been curious about this for a while, and was wondering
if
its
possible. Is there a way to have 1 machine fascilitate 2 or more
monitors,
keyboards, mouse. Each Monitor having its own
I just switched to gentoo a couple of weeks ago after using Slackware
for several months. The explanation for not including alsa support in
kdemultimedia with gentoo is bug reports #2324 and #39574. Bug report
#39574 does not even exist. Alsa was working just fine for me with kde
and
Brett I. Holcomb wrote:
Is it an issue with Gentoo or KDE. Reading the bug it appears KDE didn't
want to include support in their builds. That was last year so maybe it
works now?
On Saturday 15 November 2003 15:44, you wrote:
I just switched to gentoo a couple of weeks ago after using
Dave Naylor wrote:
URL: http://www.gentoo.org/doc/en/alsa-guide.xml
This was the guide that I used to set alsa up. So I knew about this
guide and have it printed out.
--
Kathy Wills
+
+ Genealogy Web Site:
I'm not a KDE user anymore so I've exhausted all my resources.
On Saturday 15 November 2003 16:08, you wrote:
Brett I. Holcomb wrote:
Is it an issue with Gentoo or KDE. Reading the bug it appears KDE didn't
want to include support in their builds. That was last year so maybe it
works now?
Bit of a red herring, actually. If I can walk up to your system, it won't
matter whether I can hit Ctrl-Alt-Bksp to get into your account or not. If I
have physical access to your box, I own it. Period.
Ric
-Original Message-
From: Mark Knecht [mailto:[EMAIL PROTECTED]
Sent: Friday,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 15 November 2003 21:43, Brett I. Holcomb wrote:
I'm not a KDE user anymore but looking at the ebuild there is a line below
alsa not supported that is commented out (the # sign). Basically this does
not allow alsa support to be built in
Brett I. Holcomb wrote:
I'm not a KDE user anymore but looking at the ebuild there is a line below
alsa not supported that is commented out (the # sign). Basically this does
not allow alsa support to be built in no matter what your use flags.
However, the comment at the end indicates you can
i using both ldap and mysql.
ldap as interface and mysql as backend.
all setting totally stored in mysql db (need build ldap with mysql support).
prefer using mysql 4.1.
work very stable (alpha version!) for me and support utf8.
many software direct using mysql (exim, courier-imap, maildrop
David A. Bandel [EMAIL PROTECTED] wrote:
--=.CT)Vc9(kosSjud
Content-Type: text/plain; charset=US-ASCII
Content-Disposition: inline
Content-Transfer-Encoding: 7bit
On Sat, 15 Nov 2003 12:59:45 +0100
humbaba [EMAIL PROTECTED] wrote:
Hi
I was wondering if it is possible to start an X
Why not merge the multimedia and see what happens. In the system I have that
has KDE 2.2.x it allows you to let it autodetect the sound service or you can
select oss and something else.
On Saturday 15 November 2003 16:47, you wrote:
Brett I. Holcomb wrote:
I'm not a KDE user anymore but
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 15 November 2003 22:11, Eamon Caddigan wrote:
Go to a console screen (Ctrl+Alt+F2 for example), login and type:
startx -- :1
note that you _must_ use two dashes. This tells X to start on a
different screen. You can also tell it
Brett I. Holcomb wrote:
Why not merge the multimedia and see what happens. In the system I have that
has KDE 2.2.x it allows you to let it autodetect the sound service or you can
select oss and something else.
It has been merged that is how I found out that it disables alsa via a
Erik S. Johansen wrote:
On Friday 14 November 2003 16:38, Andrew Gaffney wrote:
I'm really looking for something more generic. I just used emerge as an
example. I want to be able to strip color out of *any* output.
otoh, sed -r s:[^[][[][0-9]{1,2}[;]{0,1}[0-9]{0,2}[m]::g should filter out
On Saturday 15 November 2003 23:22, Kathy Wills wrote:
It has been merged that is how I found out that it disables alsa via a
post-install message. Doing further research the bug #39574 it mentions is
not a bug number with bugs.gentoo.org but is a bug number with
bugs.kde.org. It seems the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi out there;
trying to emerge spamass-milter I get a conflict between ssmtp and sendmail
[blocks] net-mail/ssmtp (virtual/mta from pkg net-mail/sendmail-8.12.10)
So how can I emerge spamass-milter? emerge -C ssmtp?
Thanks in andvance
tuthtu
http://www.convertlit.com/
--
Rick
Kitty5 NewMedia http://Kitty5.com
POV-Ray News Resources http://Povray.co.uk
TEL : +44 (01270) 501101 - ICQ : 15776037
PGP Public Key
http://pgpkeys.mit.edu:11371/pks/lookup?op=getsearch=0x231E1CEA
Marcin Daczkowski [EMAIL PROTECTED] wrote in message
When my system boots one of the modules I have listed to autoload is nvidia.
However, it tells me it fails. But I can do a modprobe after I login and the
module loads fine. Is this because nvidia is a tainted module? If so how
do I fix it.
Thanks.
--
[EMAIL PROTECTED] mailing list
On Sat, 15 Nov 2003 22:59:09 + (UTC)
Eamon Caddigan [EMAIL PROTECTED] wrote:
[snip]
Proper fast user switch would be such a killer cool app, I hope you
do it.
I'd probably never do it alone. Instead: anyone else interested in
this, please drop me an e-mail. If there's enough
Jason Stubbs wrote:
Emacs is probably still listed in /var/cache/edb/virtuals.
Yes, it is. What exactly is that file for ? There's
not a single line of comment in the 'virtuals' file;
what happens if i manually modify the file (add/remove
something), and what happens with the file after an
On Sat, 15 Nov 2003 16:39:56 -0500
Ric Messier [EMAIL PROTECTED] wrote:
Bit of a red herring, actually. If I can walk up to your system, it
won't matter whether I can hit Ctrl-Alt-Bksp to get into your account
or not. If I have physical access to your box, I own it. Period.
Why server rooms
On Sunday 16 November 2003 06:39, Ric Messier wrote:
Bit of a red herring, actually. If I can walk up to your system, it won't
matter whether I can hit Ctrl-Alt-Bksp to get into your account or not. If
I have physical access to your box, I own it. Period.
True but there's a difference in the
Alle 18:09, venerdì 14 novembre 2003, Jeffrey Smelser ha scritto:
I am a big believer in not adding more partitions than necessary.. It just
becomes a big headache.. I have two 40 gig drives here that are one big
partitions, (except for extra swap partition) and I just mount to
directories as
--- Tux the turtle [EMAIL PROTECTED] wrote:
Hi out there;
trying to emerge spamass-milter I get a conflict between ssmtp and sendmail
[blocks] net-mail/ssmtp (virtual/mta from pkg net-mail/sendmail-8.12.10)
So how can I emerge spamass-milter? emerge -C ssmtp?
Thanks in andvance
tuthtu
On Sunday 16 November 2003 09:26, Oliver Lange wrote:
Jason Stubbs wrote:
Emacs is probably still listed in /var/cache/edb/virtuals.
Yes, it is. What exactly is that file for ? There's
not a single line of comment in the 'virtuals' file;
what happens if i manually modify the file
On Sunday 16 November 2003 07:11, Eamon Caddigan wrote:
I've long toyed with the idea of created a set of scripts that made it a
little cleaner, or possibly integrating such features into xdm (we're
not using any display manager atm), but like most of my projects, it
would probably go
On Sunday 16 November 2003 06:08, Kathy Wills wrote:
Yes, I noticed that the bug reports were old. But, still alsa gets
disabled in the ebuild for kdemultimedia-3.1.4r1. Since I'm so new to
gentoo, I'm not sure just how to change the ebuild to see if it will
build alsa support into
On Sat, Nov 15, 2003 at 04:39:56PM -0500, Ric Messier wrote:
Bit of a red herring, actually. If I can walk up to your system, it won't
matter whether I can hit Ctrl-Alt-Bksp to get into your account or not. If I
have physical access to your box, I own it. Period.
Ric
-Original
apparently msn screwed with their protocol again and the kopete team has had
to play catch-up. they have, however developed a patch and it's available in
cvs. from http://kopete.kde.org/ :
As of today (Friday November 14th 2003), MSN made some changes to their
servers that prevent
David A. Bandel [EMAIL PROTECTED] wrote:
On Sat, 15 Nov 2003 22:59:09 + (UTC)
Eamon Caddigan [EMAIL PROTECTED] wrote:
Proper fast user switch would be such a killer cool app, I hope you
do it.
I'd probably never do it alone. Instead: anyone else interested in
this, please drop me
On Sunday 16 November 2003 11:07, Kathy Wills wrote:
Jason Stubbs wrote:
Don't know if it will compile or not. Might still get stuck on kmidi. I
haven't tested it as I'm running kde3.2 and aren't using alsa anyway due
to terrible sound quality. Let us how it goes if you decide to use it.
I've tried two pcmcia cards after doing some research and
have problems with both. First was d-link 650 which used
to be prism2 and supposed to work but newer ones are no
longer prism require proprietary drivers.
Took that back and picked up netgear
but the newer netgear pcmcia 802.11b is also
Hello everybody,
I'd like to change the /home /var location
to newly added harddisk partitions, so i need
the correct cp command phrase which regards
all and every link permission issue, like:
cp -??? /mnt/gentoo/var /mnt/gentoo/newvar
(booted from gentoo-basic without chroot)
Sorry if this
On Sat, 2003-11-15 at 13:39, Ric Messier wrote:
Bit of a red herring, actually. If I can walk up to your system, it won't
matter whether I can hit Ctrl-Alt-Bksp to get into your account or not. If I
have physical access to your box, I own it. Period.
Ric
OK, I'll bite. How?
My work box is
Jason Stubbs wrote:
...
So to fix your problem, you can just remove the reference to app-editors/emacs
from virtuals.
...
Wow, that's what i call an answer. Thank you very much.
--
[EMAIL PROTECTED] mailing list
On Sunday 16 November 2003 12:32, Oliver Lange wrote:
I'd like to change the /home /var location
to newly added harddisk partitions, so i need
the correct cp command phrase which regards
all and every link permission issue, like:
cp -??? /mnt/gentoo/var /mnt/gentoo/newvar
From the cp man
Jason Stubbs [EMAIL PROTECTED] wrote:
On Sunday 16 November 2003 07:11, Eamon Caddigan wrote:
I always thought this feature would be worked into Gnome or
KDE...
Doesn't gdm and gnome2 provide this functionality?
:)
Does it? A quick search didn't turn up anything.
Looks like Xandros does
Does any one have working nvidia drivers with nptl USE flag ???
--
Makurin Roman [EMAIL PROTECTED]
lostFPRL
--
[EMAIL PROTECTED] mailing list
On Sat, Nov 15, 2003 at 07:38:40PM -0800, Mark Knecht wrote:
On Sat, 2003-11-15 at 13:39, Ric Messier wrote:
Bit of a red herring, actually. If I can walk up to your system, it won't
matter whether I can hit Ctrl-Alt-Bksp to get into your account or not. If I
have physical access to your
On Sunday 16 November 2003 13:24, Makurin Roman wrote:
Does any one have working nvidia drivers with nptl USE flag ???
I have had it working before without any trouble. There are numerous reports
of it working on the forums as well. My guess is that message the ebuild
gives is no longer valid.
Hi Paolo,
Thanks for reporting this. It was due to the latex-package eclass being
a bit too agressive with which .tex files it tried to remake for
documentation. This has been fixed now in CVS, so please emerge sync and
then emerge texpower again.
Regards,
Mike
(Obz).
--
[EMAIL PROTECTED]
I have a man page for scripts but nowhere on my system is script. A which
script shows up nothing nor does an slocate. Emerge -s gives me no script.
Is it part of another package?
Thanks.
--
[EMAIL PROTECTED] mailing list
Jason Stubbs wrote:
I did a test and it works fine. The command you'll want is:
cp -a /mnt/gentoo/var/* /mnt/gentoo/newvar
Be aware, however, that this will probably not copy .* files in the top-level
directory, in this case /mnt/gentoo/var.
That's it. Becomes a habit to thank you. :)
--
[EMAIL
Does cp -a also preserve permissions? If not, you'll want to use -p as well.
I can't try it since I'm not at a Linux box at the moment.
Cheers,
Paul J. Fraser
[EMAIL PROTECTED]
-Original Message-
From: Oliver Lange [mailto:[EMAIL PROTECTED]
Sent: Sunday, 16 November 2003 4:31 PM
To:
Paul Fraser wrote:
Does cp -a also preserve permissions? If not, you'll want to use -p as well.
I can't try it since I'm not at a Linux box at the moment.
From man cp:
-a, --archive
same as -dpR
Chad Martin
--
[EMAIL PROTECTED] mailing list
On Sunday 16 November 2003 15:42, Paul Fraser wrote:
Does cp -a also preserve permissions? If not, you'll want to use -p as
well. I can't try it since I'm not at a Linux box at the moment.
In my previous mail:
-a, --archive
Preserve as much as possible of the structure and
Well I'm going to take another stab at this and see if I can find a
solution to my problem.
I'm running the 2.6.0 test9 mm-sources kernel. I have 2 external storage
devices, a Maxtor 80GB Firewire Drive and a 32MB USB Pen Drive. I want
to assign these to a specific scsi hosts sdc and sdd(sda
89 matches
Mail list logo
