for better perf i use ext2 with some tweak
mkfs.ext2 -I2048 -m0 /dev/myPartition
I use sqlite in backend and eix for searching update
the speed is now really excellent
every thing could be found on wiki
good luck
On 3/17/08, Chris Brennan [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED
Hello.
Since recently (I think since 2nd half of last week), when I use
sudo on my ~x86, I get the last login time displayed:
$ LC_ALL=C sudo ls -1
Last login: Mon Mar 17 07:12:40 CET 2008 from winnb000488 on pts/6
10001~
[...]
Would
try to push your external ip adress in your hosts file for your domain
On 3/17/08, Jason Carson [EMAIL PROTECTED] wrote:
Greetings,
When I send an email to myself, in the header information it says the
following...
Return-Path: [EMAIL PROTECTED]
Delivered-To: [EMAIL PROTECTED]
Received:
Chris Brennan wrote:
SNIP First thing
is first, fix portage, then if you like, contact me off list and I can
help you tweak emerge so it runs a little quicker and still be safe :D
No . Please share with us all how to make it faster. Is it
classified top secret or something? ;-)
Strong Cypher wrote:
hi, i have install kde 3 and 4. when i set kdm 4 to be defaut xdm to
launch, they won t start nor kde 3 and 4 sessions. any idea where can
i find the log that describe the error? the xsession-error doesn t
show anything
thanks
I would look in /var/log/kdm.log. See if
On Sonntag, 16. März 2008, Strong Cypher wrote:
hi, i have install kde 3 and 4. when i set kdm 4 to be defaut xdm to
launch, they won t start nor kde 3 and 4 sessions. any idea where can
i find the log that describe the error? the xsession-error doesn t
show anything
thanks
make sure that
On Sun, 16. Mar, W.Kenworthy spammed my inbox with
I believe that writing a file to a single location is not the way to do
this: you need to write a byte to the usb key in the same location, but
need to ensure it continually changes: perhaps rotating 1's/0's.
Alternatively, the concern is
I have it
ok I will look in kdm.log
Volker Armin Hemmann a écrit :
On Sonntag, 16. März 2008, Strong Cypher wrote:
hi, i have install kde 3 and 4. when i set kdm 4 to be defaut xdm to
launch, they won t start nor kde 3 and 4 sessions. any idea where can
i find the log that describe the
Hi folks,
I am finally getting through the expat update. I am currently stuck at
kdelibs for what looks like a circular problem (or a linking problem).
Forums and google tell me of problems with kdelibs and expat upgrade,
but mostly qt3 related -this seems not to be the case. The ebuild
stops
Alan McKinnon [EMAIL PROTECTED] wrote:
On Monday 17 March 2008, Michael Schmarck wrote:
Hello.
Since recently (I think since 2nd half of last week), when I use
sudo on my ~x86, I get the last login time displayed:
$ LC_ALL=C sudo ls -1
Last login: Mon Mar 17 07:12:40 CET 2008 from
Hi,
another thing that might help is not generating the cache at all. It
appears that we can get away with what is in /usr/portage/metadata/cache.
I've put -metadata-transfer into FEATURES to tell portage to skip the
Generating cache stuff, and added the following to my
/etc/portage/modules:
Thanks ! I don't know why I haven't found this file before ...
Dale a écrit :
Strong Cypher wrote:
hi, i have install kde 3 and 4. when i set kdm 4 to be defaut xdm to
launch, they won t start nor kde 3 and 4 sessions. any idea where can
i find the log that describe the error? the
On Monday 17 March 2008, Michael Schmarck wrote:
Hello.
Since recently (I think since 2nd half of last week), when I use
sudo on my ~x86, I get the last login time displayed:
$ LC_ALL=C sudo ls -1
Last login: Mon Mar 17 07:12:40 CET 2008 from winnb000488 on pts/6
10001~
[...]
Would
cypherstrong wrote:
Thanks ! I don't know why I haven't found this file before ...
Dale a écrit :
Strong Cypher wrote:
hi, i have install kde 3 and 4. when i set kdm 4 to be defaut xdm to
launch, they won t start nor kde 3 and 4 sessions. any idea where can
i find the log that
On Monday 17 March 2008, brullo nulla wrote:
Hi folks,
I am finally getting through the expat update. I am currently stuck
at kdelibs for what looks like a circular problem (or a linking
problem). Forums and google tell me of problems with kdelibs and
expat upgrade, but mostly qt3 related
Ok I have found why kdm-4.0 don't work
They doesn't support seamless login over pam even with nullpassword and
nopassword activated !!!
I use pamusb with a key, and login won't done without password sets ...
I will ask to kde team why ...
I have look in kdm.log and I have found another problem
Chris, Strong and Emil - most excellent suggestions, and I'd love to try
them out as soon as someone helps me get portage working again!
Thanks,
festus
pgpAMIgASTf6H.pgp
Description: PGP signature
Hi list!
I'm thinking about upgrading my parent's PC's graphic card because I
have driver issues with their old Nvidia GF-2 MX which prevent me of
using the closed source driver.
Now I want to ask: What's the status of the ATI drivers? Does the free
driver support 3D-acceleration on newer cards?
I have found a problem in slot of kde 3.5 and 4.0
kopete 3.5 depends on app-crypt/qca:0
kopete 4.0 depends on app-crypt/qca:2
qca:0 block qca:2 so if I wan't kopete on kde 3.5 and 4.0 they is a problem
How can I solve it ?
qca:0 and qca:2 are really blocking each other ? can't we really remove
According to the docs at http://gentoo-wiki.com/HOWTO_Setup_Samba#Using_CIFS,
the following command should work:
mount -t cifs //windows machine name/shared folder /mountpoint \
-o username=user,uid=uid,iocharset=cp850,dir_mode=0770,file_mode=660
That doesn't work for me. I get this error:
They don't realy blocking each other:
From qca-2.0.0-r2.ebuild:
DEPEND=
!app-crypt/qca-1.0-r3
So you can have both, qca-1.0-r3 and qca-2.0.0-r2 on your system (but
not qca-1.0-r2 and qca-2.0.0-r2).
But you have to unmask qca-1.0-r3 first:
echo =qapp-crypt/ca-1.0-r3
try to push your external ip adress in your hosts file for your domain
My static IP is 66.11.182.5 and my computer is called
penguin.jasoncarson.ca so what exactly would I put in /etc/hosts?
On 3/17/08, Jason Carson [EMAIL PROTECTED] wrote:
Greetings,
When I send an email to myself, in the
On Montag, 17. März 2008, cypherstrong wrote:
ls -lh /var/db/pkg/app-crypt
drwxr-xr-x 2 root root 27 18. Jan 21:50 qca-1.0-r3
drwxr-xr-x 2 root root 29 10. Feb 19:09 qca-2.0.0-r2
drwxr-xr-x 2 root root 28 10. Feb 19:10 qca-ossl-2.0.0_beta3
drwxr-xr-x 2 root root 27 10. Feb 19:02 qca-tls-1.0-r4
Push this:
66.11.182.5 jasoncarson.ca penguin.jasoncarson.ca
in your host file
remove reference to jasoncarson.ca in the 127.0.0.1 lines
Jason Carson a écrit :
try to push your external ip adress in your hosts file for your domain
My static IP is 66.11.182.5 and my computer is called
dexters84 dexters84 at gmail.com writes:
I believe the size of the writes can be relevant as well.
Stroller.
That was exactly my point. Systems based on cf card as hard drive are
usually small - one function focused devices, hence there is no need for
swap partition. To extend
Push this:
66.11.182.5 jasoncarson.ca penguin.jasoncarson.ca
in your host file
remove reference to jasoncarson.ca in the 127.0.0.1 lines
ok, I tried that and it didn't work. I came across this...
qmail never uses /etc/hosts to determine the IP address associated with a
host name.
...Which
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I am trying to udate kde-meta (actually, I think it never completely
installed, but I'm doing an update now) and it won't get past the very
first part, that of kde-base/libkpimidentities-3.5.8, because it gets this
error:
libsandbox: Can't resolve
On Mon, Mar 17, 2008 at 11:44 AM, Grant Edwards [EMAIL PROTECTED] wrote:
According to the docs at
http://gentoo-wiki.com/HOWTO_Setup_Samba#Using_CIFS,
the following command should work:
mount -t cifs //windows machine name/shared folder /mountpoint \
-o
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I was reading in the eix man page about eix-sync, and it gave about a
million options, but nowhere did I see if give a useable format for the
options, I wanted to have a option line setting
but I couldn't tell if it was like
PRINT_SLOTS=yes
yes r3 works fine
thanks
On 3/17/08, Volker Armin Hemmann [EMAIL PROTECTED] wrote:
On Montag, 17. März 2008, cypherstrong wrote:
ls -lh /var/db/pkg/app-crypt
drwxr-xr-x 2 root root 27 18. Jan 21:50 qca-1.0-r3
drwxr-xr-x 2 root root 29 10. Feb 19:09 qca-2.0.0-r2
drwxr-xr-x 2 root root 28
On Monday 17 March 2008, Chuck Robey wrote:
I was reading in the eix man page about eix-sync, and it gave about a
million options, but nowhere did I see if give a useable format for
the options, I wanted to have a option line setting
but I couldn't tell if it was like
PRINT_SLOTS=yes
cypherstrong wrote:
Ok I have found why kdm-4.0 don't work
They doesn't support seamless login over pam even with nullpassword and
nopassword activated !!!
I use pamusb with a key, and login won't done without password sets ...
I will ask to kde team why ...
I have look in kdm.log and I have
On Monday 17 March 2008, brullo nulla wrote:
What output do you get from 'revdep-rebuild -p -i' ?
Here it is:
Evaluating package order...
Warning: Failed to resolve package order.
Will merge in random order!
Possible reasons:
- An ebuild is no longer in the portage tree.
- An ebuild is
Hi,
This is a question about a small home network set-up for printing. I can't tell
if this is OT for this list, but that doesn't seem to be a firm restriction in
this part of the world in any case!
I have a locally attached printer on a Gentoo machine. I have a Windows XP
laptop. I would like
On Mon, Mar 17, 2008 at 04:31:11PM -0400, Chuck Robey wrote:
I was reading in the eix man page about eix-sync, and it gave about a
million options, but nowhere did I see if give a useable format for the
options,
Quoting from the manpage ..
/etc/eixrc
Global configuration file. The
Hi all,
I just built myself a brand new AMD64 system with an EVGA Geforce 9600GT. This
vid card requires a newer version of nvidia drivers (171.06) than is
available from portage, so I will have to install it manually.
I am wondering if there are any gotchas I should keep in mind before
On Mon, 17 Mar 2008 16:40:11 -0600, darren kirby wrote:
I just built myself a brand new AMD64 system with an EVGA Geforce
9600GT. This vid card requires a newer version of nvidia drivers
(171.06) than is available from portage, so I will have to install it
manually.
According to
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Alan McKinnon wrote:
On Monday 17 March 2008, Chuck Robey wrote:
I was reading in the eix man page about eix-sync, and it gave about a
million options, but nowhere did I see if give a useable format for
the options, I wanted to have a option line
quoth the Neil Bothwick:
On Mon, 17 Mar 2008 16:40:11 -0600, darren kirby wrote:
I just built myself a brand new AMD64 system with an EVGA Geforce
9600GT. This vid card requires a newer version of nvidia drivers
(171.06) than is available from portage, so I will have to install it
On Mon, 2008-03-17 at 10:49 +0200, Alan McKinnon wrote:
On Monday 17 March 2008, Michael Schmarck wrote:
Hello.
Since recently (I think since 2nd half of last week), when I use
sudo on my ~x86, I get the last login time displayed:
[snip]
It's a recent pam update. I updated mine on 11
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Emil Beinroth wrote:
On Mon, Mar 17, 2008 at 04:31:11PM -0400, Chuck Robey wrote:
I was reading in the eix man page about eix-sync, and it gave about a
million options, but nowhere did I see if give a useable format for the
options,
Quoting
On Mon, Mar 17, 2008 at 5:42 PM, David Blamire-Brown
[EMAIL PROTECTED] wrote:
Hi,
This is a question about a small home network set-up for printing. I can't
tell if this is OT for this list, but that doesn't seem to be a firm
restriction in this part of the world in any case!
I have a
Today I upgraded apcupsd from 3.10.18-r1 to 3.12.4. The ebuild installs
the files differently than it did and webapp-config is used for the
install.
When the emerge is complete, the cgi files are installed into
/var/www/localhost/cgi-bin and are owned by root. There is also a
directory
On 17 Mar 2008, at 18:10, James wrote:
...
Wear leveling is *probably* built into the IDE to CF converter
carrier board?
Almost certainly not, I'd have thought. Aren't those boards just dumb
pin-convertors? CF cards talk IDE.
Stroller.
--
gentoo-user@lists.gentoo.org mailing list
Sorry, sorry...
I just needed to point my browser to cgi-bin/multimin.cgi rather than
apcupsd/multimon.cgi...
On Mon, Mar 17, 2008 at 09:32:43PM -0400, Michael George wrote:
Today I upgraded apcupsd from 3.10.18-r1 to 3.12.4. The ebuild installs
the files differently than it did and
Please !!!
This was installed in an empty VM and it would be real slow to recompile
all of Gentoo. There has to be a way to fix it.
Pointers and links greatly appreciated.
TIA,
festus
On Sun, Mar 16, 2008 at 07:22:41PM -0600, John J. Foster wrote:
I unmasked portage-2.2_pre4 to see if it
46 matches
Mail list logo
