Hi. I tryed install gentoo 10.0 and there was: scanning for ata_piix
and istallation stopped. If i switch off the sata disk then installation
runs good.
I try gentoo 10.1 now and stopped on: Scanning for ehci-hcd...usb
core. I switch off usb on motherboard and installation continue. But
then
Hello,
This is not strictly a Gentoo issue, but since we have a good habit to
report upstream bugs and security issues (and I use Gentoo), I wanted
to run by a possible security hole to others.
When my machine is locked, I can still use an IR remote, running
through lirc and programmed through
Igor Spiridonov wrote:
Hi. I tryed install gentoo 10.0 and there was: scanning for
ata_piix and istallation stopped. If i switch off the sata disk then
installation runs good.
I try gentoo 10.1 now and stopped on: Scanning for ehci-hcd...usb
core. I switch off usb on motherboard and
Hi. I tryed install gentoo 10.0 and there was: scanning for ata_piix and
istallation stopped. If i switch off the sata disk then installation runs
good.
I try gentoo 10.1 now and stopped on: Scanning for ehci-hcd...usb core.
I switch off usb on motherboard and installation continue. But then
I've recently rebuilt my laptop, and am having trouble getting the
wireless to work correctly. My wireless is making an association with
my AP, but TCP/IP traffic doesn't seem to want to transmit over it; I
can't even ping my AP. TCP/IP works fine on the ethernet adapter.
Wireshark (without
daid kahl wrote:
I've recently rebuilt my laptop, and am having trouble getting the
wireless to work correctly. My wireless is making an association with
my AP, but TCP/IP traffic doesn't seem to want to transmit over it; I
can't even ping my AP. TCP/IP works fine on the ethernet adapter.
daid kahl schrieb:
Hi. I tryed install gentoo 10.0 and there was: scanning for ata_piix and
istallation stopped. If i switch off the sata disk then installation runs
good.
I try gentoo 10.1 now and stopped on: Scanning for ehci-hcd...usb core.
I switch off usb on motherboard and installation
Dale wrote:
dhk wrote:
Can someone explain the procedure for the installing software that has a
fetch restriction?
Whenever I get the F for fetch restricted (must be manually
downloaded) I can't get the build right. Usually I have to go to a
web-site and then after downloading what is
John Moe wrote:
daid kahl wrote:
I've recently rebuilt my laptop, and am having trouble getting the
wireless to work correctly. My wireless is making an association with
my AP, but TCP/IP traffic doesn't seem to want to transmit over it; I
can't even ping my AP. TCP/IP
On Donnerstag 15 Oktober 2009, dhk wrote:
Dale wrote:
dhk wrote:
Can someone explain the procedure for the installing software that has a
fetch restriction?
Whenever I get the F for fetch restricted (must be manually
downloaded) I can't get the build right. Usually I have to go to a
On Thursday 15 October 2009 12:31:25 Volker Armin Hemmann wrote:
just open the ebuild with the text editor of your choice - or less - and
read the info block. It is easy to find it. You don't have to wait for the
emerge to fail.
I find this useful: less `equery w package`, although it does
laurent a écrit :
Frank Steinmetzger a écrit :
Am Freitag, 9. Oktober 2009 schrieb laurent:
Hi,
Now I've setup vsftpd with local user.
For exemple I log with the user laurent, I create a folder via ftp.
This folder is own by laurent, so it's not exessible via apache.
How could I make that,
- Original Message -
From: John Moe john...@optushome.com.au
To: gentoo-user@lists.gentoo.org
Sent: Thursday, October 15, 2009 1:40 PM
Subject: Re: [gentoo-user] Installation gentoo problem.
Igor Spiridonov wrote:
Hi. I tryed install gentoo 10.0 and there was: scanning for
ata_piix
Hello all,
I am currently having some interesting problems with kmail since the flagging of
kde-4.3.1 as stable
I can no longer access my imap mail boxes.
On the client side there is kmail 1.12.1 in KDE 4.3.1-r1 built with (handbook
kontact semantic-desktop).
On the erver side there is
On Donnerstag 15 Oktober 2009, Elric Wolfsbruder wrote:
Hello all,
I am currently having some interesting problems with kmail since the
flagging of kde-4.3.1 as stable
I can no longer access my imap mail boxes.
On the client side there is kmail 1.12.1 in KDE 4.3.1-r1 built with
Volker Armin Hemmann wrote:
On Donnerstag 15 Oktober 2009, Elric Wolfsbruder wrote:
Hello all,
I am currently having some interesting problems with kmail since the
flagging of kde-4.3.1 as stable
I can no longer access my imap mail boxes.
On the client side there is kmail 1.12.1 in
On Donnerstag 15 Oktober 2009, Elric Wolfsbruder wrote:
Volker Armin Hemmann wrote:
On Donnerstag 15 Oktober 2009, Elric Wolfsbruder wrote:
Hello all,
I am currently having some interesting problems with kmail since the
flagging of kde-4.3.1 as stable
I can no longer access my imap
Hi,
I have KDE 4 installed as well and I think this is causing the problem
but hope there is a fix for this little boo boo. I have links to
locations on my desktop so that I can click on them to get to places
directly. I have one for camera pics, another for movies and a few
others. I upgraded
Hi all,
Anyone did success on configuring Intel GM965/GL960 on xorg 1.6? I have an acer
TravelMate 5720 ...
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960
Integrated Graphics Controller (rev 03)
on xorg-sever 1.6.3.901-r2:
I] x11-base/xorg-server
Available
Arnau Bria wrote:
Hi all,
Anyone did success on configuring Intel GM965/GL960 on xorg 1.6? I have an
acer TravelMate 5720 ...
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960
Integrated Graphics Controller (rev 03)
on xorg-sever 1.6.3.901-r2:
I]
On Donnerstag 15 Oktober 2009, Justin wrote:
Arnau Bria wrote:
Hi all,
Anyone did success on configuring Intel GM965/GL960 on xorg 1.6? I have
an acer TravelMate 5720 ...
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960
Integrated Graphics Controller (rev 03)
Ordinarily, I would also point to I/O errors, but not this time. I
have had this same version of Mathematica, 5.2, for *years*, on this
same machine, over several kernels and several Xorg upgrades, and it
was rock-solid. Not one X hang or crash. Ever. No error messages or
I/O warnings ever.
Volker Armin Hemmann wrote:
On Donnerstag 15 Oktober 2009, Elric Wolfsbruder wrote:
Volker Armin Hemmann wrote:
On Donnerstag 15 Oktober 2009, Elric Wolfsbruder wrote:
Hello all,
I am currently having some interesting problems with kmail since the
flagging of kde-4.3.1 as stable
On Donnerstag 15 Oktober 2009, Elric Wolfsbruder wrote:
Volker Armin Hemmann wrote:
On Donnerstag 15 Oktober 2009, Elric Wolfsbruder wrote:
Volker Armin Hemmann wrote:
On Donnerstag 15 Oktober 2009, Elric Wolfsbruder wrote:
Hello all,
I am currently having some interesting
Volker Armin Hemmann wrote:
On Donnerstag 15 Oktober 2009, Elric Wolfsbruder wrote:
Volker Armin Hemmann wrote:
On Donnerstag 15 Oktober 2009, Elric Wolfsbruder wrote:
Volker Armin Hemmann wrote:
On Donnerstag 15 Oktober 2009, Elric Wolfsbruder wrote:
Hello all,
I am currently
Denis wrote:
Ordinarily, I would also point to I/O errors, but not this time. I
have had this same version of Mathematica, 5.2, for *years*, on this
same machine, over several kernels and several Xorg upgrades, and it
was rock-solid. Not one X hang or crash. Ever. No error messages or
I/O
On Thu, 2009-10-15 at 19:41 +0200, Volker Armin Hemmann wrote:
You also can remove all InputDevice sections as those are
controlled
by hal.
he should let them in, but he can remove all FontPath and modules
entries. And
yes, 'vesa' has to be changed.
Or you could remove xorg.conf
Am Donnerstag, 15. Oktober 2009 schrieb Dale:
Hi,
I have KDE 4 installed as well and I think this is causing the problem
but hope there is a fix for this little boo boo. I have links to
locations on my desktop so that I can click on them to get to places
directly. I have one for camera
Frank Steinmetzger wrote:
Am Donnerstag, 15. Oktober 2009 schrieb Dale:
Hi,
I have KDE 4 installed as well and I think this is causing the problem
but hope there is a fix for this little boo boo. I have links to
locations on my desktop so that I can click on them to get to places
Frank Steinmetzger wrote:
Am Donnerstag, 15. Oktober 2009 schrieb Dale:
Hi,
I have KDE 4 installed as well and I think this is causing the problem
but hope there is a fix for this little boo boo. I have links to
locations on my desktop so that I can click on them to get to places
On Thu, Oct 15, 2009 at 3:10 PM, Dale rdalek1...@gmail.com wrote:
Well, that started something. I'll post the output here.
kbuildsycoca running...
Reusing existing ksycoca
kio (KService*): WARNING: The desktop entry file
.hidden/dirfilterplugin.desktop has Type=Service but is located under
igwasm wrote:
- Original Message - From: John Moe john...@optushome.com.au
To: gentoo-user@lists.gentoo.org
Sent: Thursday, October 15, 2009 1:40 PM
Subject: Re: [gentoo-user] Installation gentoo problem.
Igor Spiridonov wrote:
Hi. I tryed install gentoo 10.0 and there was:
On Donnerstag 15 Oktober 2009, Elric Wolfsbruder wrote:
Volker Armin Hemmann wrote:
On Donnerstag 15 Oktober 2009, Elric Wolfsbruder wrote:
Volker Armin Hemmann wrote:
On Donnerstag 15 Oktober 2009, Elric Wolfsbruder wrote:
Volker Armin Hemmann wrote:
On Donnerstag 15 Oktober 2009,
On Thu, 15 Oct 2009 14:51:21 -0400
Albert Hopkins wrote:
On Thu, 2009-10-15 at 19:41 +0200, Volker Armin Hemmann wrote:
Hi all,
You also can remove all InputDevice sections as those are
controlled
by hal.
he should let them in, but he can remove all FontPath and modules
Ok,
with no xorg it says something about not beeing able to run in
frammebufer mode... I could take the error if it's interesting
the other tips did not work, when I start X it hangs... I have to
do a ahard shutdown.
Thanks for your replies!
Arnau
Paul Hartman wrote:
On Thu, Oct 15, 2009 at 3:10 PM, Dale rdalek1...@gmail.com wrote:
Well, that started something. I'll post the output here.
kbuildsycoca running...
Reusing existing ksycoca
kio (KService*): WARNING: The desktop entry file
.hidden/dirfilterplugin.desktop has
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Dale wrote:
Well, that started something. I'll post the output here.
[snip lots of output]
I have seen that ran before during a emerge and I have not seen WARNINGs
like that before. Should I re-emerge some KDE 3.5 stuff and see if that
fixes
On Thu, Oct 15, 2009 at 4:12 PM, Dale rdalek1...@gmail.com wrote:
Paul Hartman wrote:
On Thu, Oct 15, 2009 at 3:10 PM, Dale rdalek1...@gmail.com wrote:
Well, that started something. I'll post the output here.
kbuildsycoca running...
Reusing existing ksycoca
kio (KService*): WARNING: The
Volker Armin Hemmann wrote:
On Donnerstag 15 Oktober 2009, Elric Wolfsbruder wrote:
Volker Armin Hemmann wrote:
On Donnerstag 15 Oktober 2009, Elric Wolfsbruder wrote:
Volker Armin Hemmann wrote:
On Donnerstag 15 Oktober 2009, Elric Wolfsbruder wrote:
Volker Armin Hemmann wrote:
John Moe пишет:
igwasm wrote:
- Original Message - From: John Moe john...@optushome.com.au
To: gentoo-user@lists.gentoo.org
Sent: Thursday, October 15, 2009 1:40 PM
Subject: Re: [gentoo-user] Installation gentoo problem.
Igor Spiridonov wrote:
Hi. I tryed install
Jonathan Callen wrote:
Dale wrote:
Well, that started something. I'll post the output here.
[snip lots of output]
I have seen that ran before during a emerge and I have not seen WARNINGs
like that before. Should I re-emerge some KDE 3.5 stuff and see if that
fixes it?
The reason
Jonathan Callen wrote:
Dale wrote:
Well, that started something. I'll post the output here.
[snip lots of output]
I have seen that ran before during a emerge and I have not seen WARNINGs
like that before. Should I re-emerge some KDE 3.5 stuff and see if that
fixes it?
The reason
Paul Hartman wrote:
On Thu, Oct 15, 2009 at 4:12 PM, Dale rdalek1...@gmail.com wrote:
Paul Hartman wrote:
On Thu, Oct 15, 2009 at 3:10 PM, Dale rdalek1...@gmail.com wrote:
Well, that started something. I'll post the output here.
kbuildsycoca running...
Reusing existing
On Thu, Oct 15, 2009 at 5:34 PM, Dale rdalek1...@gmail.com wrote:
Paul Hartman wrote:
On Thu, Oct 15, 2009 at 4:12 PM, Dale rdalek1...@gmail.com wrote:
Paul Hartman wrote:
On Thu, Oct 15, 2009 at 3:10 PM, Dale rdalek1...@gmail.com wrote:
Well, that started something. I'll post the output
Paul Hartman wrote:
On Thu, Oct 15, 2009 at 5:34 PM, Dale rdalek1...@gmail.com wrote:
Paul Hartman wrote:
On Thu, Oct 15, 2009 at 4:12 PM, Dale rdalek1...@gmail.com wrote:
Paul Hartman wrote:
On Thu, Oct 15, 2009 at 3:10 PM, Dale rdalek1...@gmail.com wrote:
Hi,
I just updated from xorg-server 1.3.0.0-r6 to 1.6. After the upgrade I
see a lot of applications have now much bigger fonts then they used to
have (the fonts and font sizes of course are the same - they just appear
bigger). Examples are KDM, Konsole, most KDE apps (GNOME applications
seem
On 10/16/2009 02:22 AM, Thorsten Kampe wrote:
Hi,
I just updated from xorg-server 1.3.0.0-r6 to 1.6. After the upgrade I
see a lot of applications have now much bigger fonts then they used to
have (the fonts and font sizes of course are the same - they just appear
bigger). Examples are KDM,
On Thu, 2009-10-15 at 14:51 -0400, Albert Hopkins wrote:
On Thu, 2009-10-15 at 19:41 +0200, Volker Armin Hemmann wrote:
You also can remove all InputDevice sections as those are
controlled
by hal.
he should let them in, but he can remove all FontPath and modules
entries.
On Fri, 2009-10-16 at 08:47 +0800, W.Kenworthy wrote:
xorg with hal does not work well on many systems - and hal on my
laptop
(i915) was a disaster.
Well I guess YMMV. I have 3 machines using i915 drivers and all of them
work flawless with hal and no xorg.conf. Even the laptop which I'm
On Thu, 2009-10-15 at 21:36 -0400, Albert Hopkins wrote:
On Fri, 2009-10-16 at 08:47 +0800, W.Kenworthy wrote:
xorg with hal does not work well on many systems - and hal on my
laptop
(i915) was a disaster.
Well I guess YMMV. I have 3 machines using i915 drivers and all of them
work
On 15 Oct 2009, at 22:56, Igor Spiridonov wrote:
...
Thank you. I try: gentoo nousb noload=scsi_wait_scan. And
instalation continue. But further:
Looking for the cdrom
Media not found
Could not find cd to boot
Could not find the root block device in
Please specify another value or Press
On 15 Oct 2009, at 21:52, Volker Armin Hemmann wrote:
56 lines removed
strange.
did you also create the 'mailtransport' and acount settings from
scratch,
or did you copy stuff over from 3.5.10?
I have done both.
then I am out of ideas, sorry :(
I have a suggestion: learn to snip.
Stroller:
On 15 Oct 2009, at 22:56, Igor Spiridonov wrote:
...
Thank you. I try: gentoo nousb noload=scsi_wait_scan. And
instalation continue. But further:
Looking for the cdrom
Media not found
Could not find cd to boot
Could not find the root block device in
Please specify another value or
53 matches
Mail list logo
