On 08.03.2015 16:59, Tom H wrote:
Are the ownership and mode of
e55a6b6a09bd2b1c50216272545a8d1f-3.19.1-gentoo.conf the same as the
two others (although I'd assume that it wouldn't matter) and is it
formatted correctly?
Yes, I think so:
# ls -l /boot/loader/entries/
total 2
-rwxr-xr-x 1
On 08.03.2015 17:10, Stefan G. Weichinger wrote:
On 08.03.2015 16:59, Tom H wrote:
Are the ownership and mode of
e55a6b6a09bd2b1c50216272545a8d1f-3.19.1-gentoo.conf the same as the
two others (although I'd assume that it wouldn't matter) and is it
formatted correctly?
Yes, I think so
On 25.02.2015 17:16, Bob Wya wrote:
For my Samsung 830 / 850 Pro SSDs I don't see any similar NCQ queuing
error(s) in my boot logs (they are hooked up to the Intel Controller just
now - since I can't connect them to my 6Gbit LSI Controller - arrrggg!!)
Perhaps this issue is confined to the
On 25.02.2015 10:23, Stefan G. Weichinger wrote:
good hint, thanks! I will report back if I find something.
Swapped the cable and also the SATA-socket on the board.
It always gives the same result ...
What is interesting: the HDDs negotiate their NCQ fine:
[2.254804] ata2.00: ATA-8
On 25.02.2015 14:18, Bob Wya wrote:
Just out of interest what make is the Host Controller on your
motherboard... Is it a Intel one? Or some crappy addon chipset? Perhaps you
could post the output of lscpi (with lots of - flags - just the Host
Controller bit)?
00:1f.2 SATA controller:
On 25.02.2015 00:55, Bob Wya wrote:
Super obvious question... but can you enable AHCI mode for your SATA
Controller - in the BIOS.
AHCI is enabled in the BIOS, I checked right now.
Do the messages tell us it isn't?
Ah, I see, no NCQ for the SSD ... hmm, right.
Are you using HP supplied SATA
On 24.02.2015 17:01, Rich Freeman wrote:
Seems like there should be a systemd-users mailing list, actually.
This sort of situation is completely distro-agnostic.
Yes! And systemd-devel ml is always kind of they will laugh at me and
say ugly things! ;-)
You certainly could design such an
ordered myself a new and shiny ssd last week.
one thinkpad still had that 60GB OCZ Vertex3 and that was a bit tight
now and then.
So I ordered a Samsung SSD 850 EVO 500GB for my desktop and planned to
move the former 840 EVO 250GB to the thinkpad.
Done today.
Moving was rather *boring* -
Am 24.02.2015 um 03:14 schrieb Canek Peláez Valdés:
Stefan, if you already have systemd (which I believe you do), why don't you
compile in the support for microhttpd and use the journal? This is the
exact scenario for which systemd-journal-gatewayd[1] was written.
very good ... enabled it on
On 24.02.2015 13:14, Rich Freeman wrote:
I suspect this is trivial - it looks like something like this would work:
http://.../entries?_SYSTEMD_UNIT=postfix.service
Yes, correct, as I thought this is the easy part.
Works:
http://mythtv.local:19531/entries?_SYSTEMD_UNIT=postfix.service
(using
As I see that syslog-thread ...
I think of setting up something for apache that allows a client to
browse and search through the postfix-logs for his domain.
Any good hints what to use for that purpose?
Stefan
Does anyone know why I can't use the
controller type='scsi' model=lsisas1068 /
when I do a virsh edit myvm while there is a model lsisas1078 available?
According to https://libvirt.org/formatdomain.html#elementsControllers
there should be both.
I have to convert/migrate a VMware VM using
On 09.02.2015 16:37, Stefan G. Weichinger wrote:
Does anyone know why I can't use the
controller type='scsi' model=lsisas1068 /
when I do a virsh edit myvm while there is a model lsisas1078 available?
According to https://libvirt.org/formatdomain.html#elementsControllers
On 09.02.2015 16:37, Stefan G. Weichinger wrote:
Does anyone know why I can't use the
controller type='scsi' model=lsisas1068 /
when I do a virsh edit myvm while there is a model lsisas1078 available?
According to https://libvirt.org/formatdomain.html#elementsControllers
On 05.02.2015 17:59, Michael Palimaka wrote:
On 04/02/15 08:07, Stefan G. Weichinger wrote:
Am 03.02.2015 um 20:30 schrieb Jörg Schaible:
Consider a memcheck. Arbitrary failures while the CPU is high is often
because some component starts dying. Sometimes cleaning the fans work
wonders
Am 03.02.2015 um 22:07 schrieb Stefan G. Weichinger:
Am 03.02.2015 um 20:30 schrieb Jörg Schaible:
Consider a memcheck. Arbitrary failures while the CPU is high is often
because some component starts dying. Sometimes cleaning the fans work
wonders.
Good suggestion, will check tmrw
Am 03.02.2015 um 12:27 schrieb Alec Ten Harmsel:
I've never had qtwebkit fail to build (at least not recently), what's
the exact error? Can you post the output of `emerge --info
dev-qt/qtwebkit` as well?
hmmm, yes, I would like to ... but now it worked!
I had it fail 3 times already ... maybe
Am 03.02.2015 um 20:30 schrieb Jörg Schaible:
Consider a memcheck. Arbitrary failures while the CPU is high is often
because some component starts dying. Sometimes cleaning the fans work
wonders.
Good suggestion, will check tmrw and clean the fans as well.
It gave internal compiler error
dev-qt/qtwebkit does not compile for me ... not with gcc 4.8.4 or 4.9.2 ...
before I file a bug @ b.g.o ... anyone else?
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Am 02.02.2015 um 22:35 schrieb Neil Bothwick:
On Mon, 02 Feb 2015 19:02:24 +0100, Stefan G. Weichinger wrote:
I applied the patch from Comment 9 to nfs-utils-1.3.2-r1 but
rpc-statd.service doesn't start either.
Do I have to downgrade as well
On 02.02.2015 16:19, waben...@gmail.com wrote:
Thanks for the explanation. My NFS servers are running Ubuntu 14.04.1
LTS. Only my clients are gentoo systems. And on the clients I have no
NFS 4 support in the kernel and I also don't have to specify nfsver=4.
Maybe this problem only occurs
On 02.02.2015 16:55, Holger Hoffstätte wrote:
https://bugs.gentoo.org/show_bug.cgi?id=538372
Explanations fixes.I have it running on both server client (with
openrc). Refusing to set NFS_V4_2 on the client may break things since
it's apparently the default for protocol negotiation, but
What do you gentoo-users prefer for doing IPAM ... ?
Learned about http://phpipam.net today ... no gentoo ebuild yet.
opinions? recommendations?
Stefan
On 29.01.2015 11:31, hydra wrote:
I haven't migrated to group_vars yet, so try and let us know ;)
It took me a bit of fiddling but I think I figured it out.
I had to get the directory structure correct ... now I have
/etc/ansible/inventories/group_vars/
with files like siteA, siteB, siteC ...
Am 30.01.2015 um 19:32 schrieb hydra:
By the way, you don't need to have it in /etc/ansible, feel free to have it
anywhere.
Thanks for the reminder ... I know already ;)
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Am 30.01.2015 um 02:34 schrieb Jonathan Callen:
You have mounted your ESP on /boot, so you need to tell grub *that*
is your ESP, not /boot/efi, like so:
# grub2-install --target=x86_64-efi --efi-directory=/boot
Once you do that, everything
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Am 30.01.2015 um 11:05 schrieb Stefan G. Weichinger:
Am 30.01.2015 um 02:34 schrieb Jonathan Callen:
You have mounted your ESP on /boot, so you need to tell grub
*that* is your ESP, not /boot/efi, like so:
# grub2-install --target=x86_64-efi
sorry ... still a bit OT but maybe interesting for others as well:
Yesterday I started to modify the following ansible role to fit my needs
and work with gentoo target hosts:
https://github.com/debops/ansible-dhcpd
I modified tasks/main.yml (use portage ... install iproute2 as well) and
On 29.01.2015 10:47, Tomas Mozes wrote:
Have your IPs listed in hosts-production.
For each site create a file, like:
site_A.yml
- hosts: site_A
roles:
- ...
site_B.yml
- hosts: site_B
roles:
- ...
Then create site.yml where you include site_A.yml and site_B.yml.
On 28.01.2015 21:36, Tom H wrote:
My command lead to a non-booting machine ... the gummiboot-entry was
removed from UEFI.
But IIRC the 'tree' output that you'd posted, you shouldn't have the
leading '\EFI'.
the EFI is under /boot/efi
from my trial and error today -
# ls -l
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 28.01.2015 21:42, Neil Bothwick wrote:
On Wed, 28 Jan 2015 21:34:31 +0100, Stefan G. Weichinger wrote:
Would you mind sharing the tree of your /boot ... ? I tried
booting grub and it didn't work yet.
To answer this and your previous
On 28.01.2015 21:31, Stefan G. Weichinger wrote:
My command lead to a non-booting machine ... the gummiboot-entry was
removed from UEFI.
tried your command and rebooted, worked, thanks!
I now have:
# efibootmgr
BootCurrent: 0008
Timeout: 0 seconds
BootOrder
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 28.01.2015 22:16, Neil Bothwick wrote:
Which could be because Grub can't find it's files. It installed
them in /boot/EFI/GRUB2 here.
% ls -1 /boot/EFI/**/*.efi /boot/EFI/Boot/bootx64.efi
/boot/EFI/GRUB2/grubx64.efi
On 28.01.2015 22:37, Stefan G. Weichinger wrote:
thanks, I will go through this asap (hopefully tomorrow).
Just in case someone else is motivated right now ;-)
- mine (with definitely too much grub-content in there)
should I go for it and format the ESP ... remount and re-install both
On 28.01.2015 20:47, Tom H wrote:
On Wed, Jan 28, 2015 at 2:02 PM, Stefan G. Weichinger li...@xunil.at wrote:
On 28.01.2015 19:50, Stefan G. Weichinger wrote:
On 28.01.2015 19:44, Stefan G. Weichinger wrote:
So now Linux Boot Manager is gummiboot ... and grub is grub ;)
And for the records
On 28.01.2015 22:32, Tom H wrote:
On Wed, Jan 28, 2015 at 3:34 PM, Stefan G. Weichinger li...@xunil.at wrote:
On 28.01.2015 21:31, Stefan G. Weichinger wrote:
My command lead to a non-booting machine ... the gummiboot-entry was
removed from UEFI.
tried your command and rebooted, worked
On 28.01.2015 22:55, Tom H wrote:
You need a 'grub.cfg' in '/boot/efi/EFI/grub_uefi'.
I've deleted your email with the 'tree' output. I'm going to have to
look it up in the archives because you shouldn't have 'efi' in your
path if the ESP mountpoint is '/boot'.
forget the old mail.
I
On 28.01.2015 23:51, Tom H wrote:
Why two EFIs?
One of them's unnecessary but if you want to have both, you have to
have them both in the efibootmgr invocation.
I don't know why.
What I did:
cd /boot
rm -fr *
gummiboot install
grub2-install --target=x86_64-efi --efi-directory=/boot/efi
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 28.01.2015 01:36, Neil Bothwick wrote:
On Wed, 28 Jan 2015 00:40:32 +0100, Stefan G. Weichinger wrote:
No need for chainloading with UEFI. Set Gummiboot as the
default boot option and hold down Esc (or whichever key your
motherboard uses
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
This worked now :
# grub2-install --target=x86_64-efi --efi-directory=/boot/efi
cleaning up the entries ... I get
# grub2-install --target=x86_64-efi --efi-directory=/boot/efi
Installing for x86_64-efi platform.
efibootmgr: Could not set variable
On 28.01.2015 19:38, Tom H wrote:
Try to add '--efi-directory=/boot' to your grub-install invocation
although I wonder whether grub-mkconfig will find your kernels and
initramfs's if they aren't in the root of '/boot'.
Thanks. Got it already -
# rm /sys/firmware/efi/efivars/dump-type0-*
#
On 28.01.2015 19:44, Stefan G. Weichinger wrote:
So now Linux Boot Manager is gummiboot ... and grub is grub ;)
And for the records:
renaming Linux Boot Manager to gummiboot was done by:
# efibootmgr -b -B
# efibootmgr -c -L gummiboot
nice!
On 28.01.2015 19:50, Stefan G. Weichinger wrote:
On 28.01.2015 19:44, Stefan G. Weichinger wrote:
So now Linux Boot Manager is gummiboot ... and grub is grub ;)
And for the records:
renaming Linux Boot Manager to gummiboot was done by:
# efibootmgr -b -B
# efibootmgr -c -L
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 27.01.2015 23:47, Neil Bothwick wrote:
On Tue, 27 Jan 2015 22:31:21 +, Mick wrote:
On Tuesday 27 Jan 2015 21:21:05 Stefan G. Weichinger wrote:
Just wanted to share that I switched from booting via grub2 to
gummiboot ... UEFI only now
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 28.01.2015 00:35, Neil Bothwick wrote:
afaik you could chainload grub from gummiboot to do that . ?
;)
No need for chainloading with UEFI. Set Gummiboot as the default
boot option and hold down Esc (or whichever key your motherboard
On 25.01.2015 14:32, Volker Armin Hemmann wrote:
teamviewer. You can chat. You can see their desktops and see what they
are doing wrong.
Not the right tool for my use case.
I don't want to see his desktop ... we just discuss issues and how to
proceed when we debug stuff or plan things. Like
On 23.01.2015 12:06, Raffaele BELARDI wrote:
I suppose you're referring to 'written' chat.
Yes!
At work, on a local
network, I'm using pidgin client with SIPE plugin
(x11-plugins/pidgin-sipe ). Works fine to chat with co-workers using
Microsoft Lync or Office Communicator. File
I communicate with an admin at a customer ...
we write dozens of emails and tickets and often it would be simpler to
have some kind of chat or so.
I'd like to avoid skype etc ... so I think of installing something on
one of their gentoo-servers that allows us to run a simple chat.
I run
On 23.01.2015 14:35, Jc García wrote:
A Murmur server is fairly easy and quick to install, and you get text
and audio encrypted by default, the mumble client is very user
friendly also.
The good old Jabber(XMPP) might be another option with empathy as
client. or even easier make an IRC
On 19.01.2015 22:49, Stefan G. Weichinger wrote:
I learned my first steps with ansible around these ansible-playbook(s):
https://github.com/jameskyle/ansible-gentoo
Here my changes in a fork of the mentioned ansible-role:
https://github.com/stefangweichinger/ansible-gentoo
Maybe someone
Am 19.01.2015 um 11:11 schrieb Stefan G. Weichinger:
I might file the bug at b.g.o. .. going upstream seems a bit early ;-)
posted to their google-group and got pointed to the latest devel-branch
(equals to ** in our gentoo-world).
Works now, even in mixed mode (both systemd and openrc
Am 19.01.2015 um 19:03 schrieb James:
I think you drasitcally over_estimate the number of those happy linux
distro users. I think if there was an easy way to perform a few typical
gentoo installs (workstation, mail-server, web server, dns server,
hardended*) then folks would migrate heavily
On 18.01.2015 09:25, Alan McKinnon wrote:
My advice:
Start with groups. If you find you need to have lots of when
clauses to make the plays work across more than one distro, and the
whens follow the same format, then you might want to split them into
groups. Make for example a gentoo-www
On 12.01.2015 17:46, Alan McKinnon wrote:
You'd have to define it yourself in your plays somewhere
Several ways present themselves:
- Group customers together by customer name and use the group name.
- Define the customer directly in the inventory. Generally it isn't
recommended to
On 11.01.2015 17:36, Alan McKinnon wrote:
The trick is to use a system that guarantees you a unique label or
identifier for each host.
Perhaps {{ customer_name }}/{{ hostname }} works?
This would fail if you have two customers with the same company name
(rare, but not impossible) or
On 12.01.2015 08:46, Tomas Mozes wrote:
On 2015-01-11 22:06, Alan McKinnon wrote:
Out of curiosity, ansible-controlled files, sysadmin-controlled files
means that something is managed via ansible and something is done
manually?
Yes
Then it's clear why /etc is in git. Ideally one would
Am 11.01.2015 um 13:25 schrieb Rich Freeman:
On Sun, Jan 11, 2015 at 3:22 AM, Alan McKinnon alan.mckin...@gmail.com
wrote:
The reason I'm recommending to keep all of /etc in it's own repo is that
it's the simplest way to do it. /etc/ is a large mixture of
ansible-controlled files,
Am 08.01.2015 um 19:29 schrieb Alan McKinnon:
The directory layout in the best practice page is indeed way more than
you need, it lists most of the directories in common use across a wide
array of deployments. In reality you create just the directories you need.
Global stuff goes in the top
On 08.01.2015 00:02, Alan McKinnon wrote:
On 07/01/2015 22:30, Stefan G. Weichinger wrote:
Am 07.01.2015 um 20:06 schrieb Tomas Mozes:
Strange, I only have successful stories with upgrading old gentoo
machines. If you have a machine which you update regularly then you know
all the issues
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Am 07.01.2015 um 13:13 schrieb Neil Bothwick:
On Wed, 07 Jan 2015 13:01:34 +0100, Tomas Mozes wrote:
Try to fetch some older portage snapshots
http://dev.gentoo.org/~swift/snapshots/ and update in steps, not
as a 4 year giant leap. Try to fetch
Am 07.01.2015 um 12:52 schrieb Stefan G. Weichinger:
Thanks for any pointers!
I *think* I solved it by fixing the binutils-setting ... just testing
... seems solved for now!
Stefan
Am 07.01.2015 um 14:06 schrieb Alan McKinnon:
The tricky one is going to be that persistent interface names from udev
18 months or so back. When you get to that, you'll probably want to
re-read the huge threads from that time, as you only get one chance to
get it right.
One addition:
at the
Am 07.01.2015 um 14:28 schrieb Rich Freeman:
On Wed, Jan 7, 2015 at 8:06 AM, Alan McKinnon alan.mckin...@gmail.com wrote:
openrc should be seamless. I forget the exact timelines, but IIRC you
will also hit baselayout-2 migration. That one was very smooth and well
documented so you shouldn't
Am 08.01.2015 um 00:02 schrieb Alan McKinnon:
In my opinion, ansible almost always beats puppet.
Puppet is a) complex b) built to be able to deal with vast enterprise
setups and c) has a definition language I never could wrap my brains
around. It always felt to me like puppet was never a
Am 07.01.2015 um 20:06 schrieb Tomas Mozes:
Strange, I only have successful stories with upgrading old gentoo
machines. If you have a machine which you update regularly then you know
all the issues during the time and so upgrading per partes leads to no
surprises but the same challenges
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Am 07.01.2015 um 21:17 schrieb Neil Bothwick:
That's not what I meant, but I see your point about using --reflink
if making copies. My thought was to forget the whole tmpfs and
copying think, set KEEP WORK in FEATURES and use XFS for
Am 07.01.2015 um 17:08 schrieb Rich Freeman:
On Wed, Jan 7, 2015 at 7:47 AM, Alan McKinnon alan.mckin...@gmail.com wrote:
It's worth repeating: the customer caused this, he must now feel the
pain and not you.
So, if he made an informed choice and that is what he chose, then that
is how it
Am 07.01.2015 um 13:47 schrieb Alan McKinnon:
On 07/01/2015 13:52, Stefan G. Weichinger wrote:
I am in the process of upgrading an old (~2010) gentoo server.
The customer never wanted updates ... and now he wants ... *sigh*
Don't waste your time (you are already experiencing the full
Am 07.01.2015 um 17:38 schrieb James:
Stefan G. Weichinger lists at xunil.at writes:
I am in the process of upgrading an old (~2010) gentoo server.
The customer never wanted updates ... and now he wants ... *sigh*
Thanks for any pointers!
best, Stefan
If the server is 5 years old
I am in the process of upgrading an old (~2010) gentoo server.
The customer never wanted updates ... and now he wants ... *sigh*
I managed to compile basic stuff already ... portage, gcc etc
Now I get errors at emerging packages which is bad.
Still no openrc installed and the udev-upgrade also
Am 07.01.2015 um 14:44 schrieb Alan McKinnon:
On 07/01/2015 15:19, Stefan G. Weichinger wrote:
Seems as if the biggest problems are solved right now?
if you ran emerge -avuND world and portage goes ahead and does it
without blockers, then I'd agree - the major problems are solved.
It's
Am 26.12.2014 um 09:11 schrieb Dale:
I didn't get any here either. Unless Gmail filtered it which should be
disabled.
me = 3rd one not getting them.
Without gmail (but other antispam-measures ...).
S
Am 24.12.2014 um 02:02 schrieb Andrew Savchenko:
Ad slow: what kind of hardware did you use and how many nodes/osds?
We used 3 servers, where each server was both node and osd (that's
our hardware limitation). Each machine had hardware alike 2x
Xeon E5450, 16 GB and 2 Gbps network
Anyone here running ceph / http://ceph.com/ on gentoo?
As server(s) or client or ... ?
I am learning about this right now and currently on my way to a first
small test cluster. Very interesting possibilities !
Stefan
Am 23.12.2014 um 16:25 schrieb Tomas Mozes:
I tried the filesystem with kernel 3.7 a year ago (to export distfiles
to several machines). Since it's kernel based a bug caused my system to
reboot and sadly it was a database. However the project mentioned that
the filesystem wasn't production
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Am 23.12.2014 um 16:20 schrieb Andrew Savchenko:
Hi,
On Tue, 23 Dec 2014 15:22:26 +0100 Stefan G. Weichinger wrote:
Anyone here running ceph / http://ceph.com/ on gentoo?
As server(s) or client or ... ?
I am learning about this right now
Am 23.12.2014 um 16:28 schrieb Stefan G. Weichinger:
Am 23.12.2014 um 16:25 schrieb Tomas Mozes:
I tried the filesystem with kernel 3.7 a year ago (to export distfiles
to several machines). Since it's kernel based a bug caused my system to
reboot and sadly it was a database. However
Am 23.12.2014 um 21:40 schrieb Rich Freeman:
On Tue, Dec 23, 2014 at 3:27 PM, Stefan G. Weichinger li...@xunil.at wrote:
got my first two demo nodes up and in-sync ... what a success ;-)
I started to look into ceph, and my biggest issue is that they don't
protect against silent corruption
Am 23.12.2014 um 22:08 schrieb Holger Hoffstätte:
On Tue, 23 Dec 2014 21:54:00 +0100, Stefan G. Weichinger wrote:
At least for the future ... now that btrfs is declared stable at least
Yeah, no. 3.18 is finally OK-ish (after they missed the .17 merge window
with a huge number of fixes
;-)
Yes, nice.
To explain: I only let the thinkpad in there for maybe 10 minutes or so ... So
the risk is minimized, I assume.
Am 17. Dezember 2014 18:44:37 MEZ, schrieb Christian Kruse c...@defunct.ch:
Hi,
Stefan G. Weichinger writes:
When I compile bigger packages on my small ThinkPad
Am 15.12.2014 um 11:45 schrieb Stefan G. Weichinger:
Am 15.12.2014 um 11:03 schrieb Stefan G. Weichinger:
gnome-control-center shows both but enabling the 2nd simply doesn't work.
This is all without trying to use wayland! Just plain gnome ...
I even tried the kernel-options to enable
Am 16.12.2014 um 12:51 schrieb Stefan G. Weichinger:
I don't get wayland running here ... see the attached log of a failing
attempt.
update: gnome-session on wayland running
after using this: https://bugs.gentoo.org/show_bug.cgi?id=532566
Am 17.12.2014 um 07:33 schrieb J. Roeleveld:
Try cleaning the vents.
Also, most couches have a tendency to compress when something like a laptop
is
on it. Effectively blocking all airflow.
If the temperature goes to 99C when on top of a table, return the laptop to
the shop as it is
I recently set up Gnome 3.14 with basic wayland support on one of my
thinkpads. This thinkpad uses intel graphics ... my main desktop comes
with a Nvidia GeForce GT 430 and I want to test wayland there as well.
As far as I researched one has to use the opensource nouveau drivers
them, right?
I
Am 15.12.2014 um 11:03 schrieb Stefan G. Weichinger:
gnome-control-center shows both but enabling the 2nd simply doesn't work.
This is all without trying to use wayland! Just plain gnome ...
I even tried the kernel-options to enable the HDMI .. hmm
I played with stuff like xrandr --output
Am 11.12.2014 um 10:01 schrieb Helmut Jarausch:
Why do you use Google-Chrome?
I'm using Chromium which works just fine with gentoo-sources-3.18.0.
... and google-chrome works as well, at least here for me
Am 30.11.2014 um 00:57 schrieb Al:
Stefan G. Weichinger wrote:
Who has rent a virtual server at linode.com and what is your opinion?
I have two servers with Linode, one running Gentoo, and Debian on the other.
My experience has been great so far.
My only contact with support was an ipv6
Am 30.11.2014 um 11:57 schrieb J. Roeleveld:
No, pv-grub is run inside the context of the host, using a kernel image
inside the VM.
... which is not in /boot as far as I see.
So if I want to add kernel-boot-time-options I have to install my own
kernel plus the entry in menu.lst, correct?
Am 30.11.2014 um 12:49 schrieb Pandu Poluan:
It performs magic tricks to read the /boot proper, because / might be on a
different partition or even different virtual disk, but 99% of the time it
works automagically.
It's the 1% that you should be scared of :-)
Ah, at least something! ;-)
Am 30.11.2014 um 12:59 schrieb Stefan G. Weichinger:
Am 30.11.2014 um 12:49 schrieb Pandu Poluan:
It performs magic tricks to read the /boot proper, because / might be on a
different partition or even different virtual disk, but 99% of the time it
works automagically.
It's the 1% that you
fellow gentoo-users:
Who has rent a virtual server at linode.com and what is your opinion?
I find stuff like:
http://www.webhostingtalk.com/showthread.php?t=1101752
https://plus.google.com/+DiegoElioPettenò/posts/FbuwyVg79Eh
Maybe they have learned since then?
Any current opinions?
I spent
Am 30.11.2014 um 00:57 schrieb Al:
My experience has been great so far.
My only contact with support was an ipv6 issue that I ran into a few
months ago, and they quickly replied with a reference to a Gentoo bug
which included the fix.
So here's one vote for Linode.
good to hear that
Am 26.11.2014 um 21:39 schrieb Rich Freeman:
Most devs can't wait to switch to git. There are a few who might
prefer to stick with cvs but overall I don't think that is preventing
us from switching at all.
(without having read the whole thread, sorry)
my *personal opinion* is that git
Am 13.11.2014 um 21:34 schrieb Stefan G. Weichinger:
Up and running with gnome 3.14 as well.
Snappy performance so far.
Only a few packages left to care about.
Nice.
Just another status for the records:
so far I am running happily on ~amd64 built from scratch with
sys-devel/gcc(**)4.9.2
Am 21.11.2014 um 20:06 schrieb Peter Weilbacher:
On 20/11/14 18:19, Stefan G. Weichinger wrote:
But I like that trackpoint
yeah at first it's odd, but then when you start getting used to
navigating without removing hands from keyboard it does become almost a
prerequisite.
Just
Am 21.11.2014 um 18:25 schrieb Grant Edwards:
Interesting. I ask for thinkpads and get two answers pointing to other
brands ;-)
You did not ask for/about thinkpads.
You said you were currently running thinkpads.
You did not say that you wanted to replace them with new thinkpads,
just
Am 20.11.2014 um 21:16 schrieb Daniel Frey:
On 11/20/2014 11:16 AM, thegeezer wrote:
yeah at first it's odd, but then when you start getting used to
navigating without removing hands from keyboard it does become almost a
prerequisite.
does anyone know if you can get usb keyboards that have
Am 20.11.2014 um 15:37 schrieb Sid S:
In a similar vein, I would suggest https://system76.com/laptops. I found
them after I purchased my laptop. Had I known, I likely would have gone
with them and purchased their most expensive model.
For the most part, what you want is relatively hard to
I consider buying a new laptop in late 2014 ... taxes and stuff ...
I run 2 thinkpads here, each with 8 gigs of RAM and SSD inside:
L520 and X220 - both still with Intel Core i-(5|7)-2xxx inside.
So far OK, but not up2date.
Considering a budget of ~1000 EUR maximum (more based on reason) ...
Back to the topic of the thread:
As I mentioned I started to prepare a new root-filesystem within a
btrfs-subvolume.
By using systemd-nspawn I chroot into it and can rebuild my system
from scratch while running my main installation.
I set up a second grub2-entry as well so I can even chose
201 - 300 of 1486 matches
Mail list logo
