On Sunday 22 November 2009 03:41:35 sean wrote:
Dale wrote:
I would also add, watch the USE flags. You may be able to turn some
off, that may help as well.
Dale
Altering some USE flags was a big help. I had been altering them, but
finally it worked.
I went from over 300 packages down
Hi All,
I was using mplayerplug-in until it was substituted in the tree for gnome-
mplayer. I was happier with mplayerplug-in because I could also access the
stream/file in /tmp/ and save it, resize it, replay it, etc.
With gnome-mplayer all I get is a socket in /tmp which I can't access
I checked with various programs (not only standard explorer copy), and the
speeds that are reported from W7 are real, they average at ~70MB/s. The best
speed that I have achieved with gentoo, is using gnome gvfs with fuse
(without fuse, if it is completely virtual it is worse) , but they are still
Mick wrote:
Hi All,
I was using mplayerplug-in until it was substituted in the tree for gnome-
mplayer. I was happier with mplayerplug-in because I could also access the
stream/file in /tmp/ and save it, resize it, replay it, etc.
With gnome-mplayer all I get is a socket in /tmp which I
I think that buying an SSD right now is not worth it. If you are going to
buy one, get the intel G2 ones, but in my opinion it is always better to
first max out your RAM in your PC. After all the SSD is going to help when
you first boot your PC or open a program. After that everything is cached in
On Sunday 22 November 2009 10:43:01 Dale wrote:
Mick wrote:
Hi All,
I was using mplayerplug-in until it was substituted in the tree for
gnome- mplayer. I was happier with mplayerplug-in because I could also
access the stream/file in /tmp/ and save it, resize it, replay it, etc.
On Sat, Nov 21, 2009 at 10:41:35PM -0500, sean wrote
Altering some USE flags was a big help. I had been altering them,
but finally it worked. I went from over 300 packages down to 32.
That's one of the reasons I lead off my USE in /etc/make.conf with a
-*, and then enable only what I
Mick wrote:
On Sunday 22 November 2009 10:43:01 Dale wrote:
Mick wrote:
Hi All,
I was using mplayerplug-in until it was substituted in the tree for
gnome- mplayer. I was happier with mplayerplug-in because I could also
access the stream/file in /tmp/ and save it, resize it, replay
None of my git-based overlays from overlays.gentoo.org have
been able to sync this morning. Is the server having
problems or is something wrong with my git?
--Mike
Mick wrote:
On Sunday 22 November 2009 12:47:57 Dale wrote:
Mick wrote:
On Sunday 22 November 2009 10:43:01 Dale wrote:
Mick wrote:
Hi All,
I was using mplayerplug-in until it was substituted in the tree for
gnome- mplayer. I was happier with mplayerplug-in because
Mike Edenfield wrote:
None of my git-based overlays from overlays.gentoo.org have been able to
sync this morning. Is the server having problems or is something wrong
with my git?
--Mike
Pushing and Pulling is fine here.
signature.asc
Description: OpenPGP digital signature
On Sunday 22 November 2009 15:05:57 Mike Edenfield wrote:
None of my git-based overlays from overlays.gentoo.org have
been able to sync this morning. Is the server having
problems or is something wrong with my git?
--Mike
I only have one git overlay from o.g.o. - sunrise.
With my last
On Sunday 22 November 2009 14:06:57 Dale wrote:
Mick wrote:
On Sunday 22 November 2009 12:47:57 Dale wrote:
Mick wrote:
On Sunday 22 November 2009 10:43:01 Dale wrote:
Mick wrote:
Hi All,
I was using mplayerplug-in until it was substituted in the tree for
gnome- mplayer. I was
Mick schrieb am 22.11.2009 14:48:
http://www.amd.com/us-
en/assets/content_type/DownloadableAssets/T64X2_animation.wmv
Works fine with gecko-mediaplayer and download-helper.
--
Daniel Pielmeier
signature.asc
Description: OpenPGP digital signature
On Sunday 22 November 2009 10:33:41 Mick wrote:
On Sunday 22 November 2009 03:41:35 sean wrote:
Dale wrote:
I would also add, watch the USE flags. You may be able to
turn some
off, that may help as well.
Dale
Altering some USE flags was a big help. I had been altering
them, but
Is sdb an SD device? Is the module loaded?
from the OP:
I've had
this problem before which I traced to the lack of support for SD cards
in the kernel. This time it's something else.
mw
Alan McKinnon wrote:
On Sunday 22 November 2009 15:05:57 Mike Edenfield wrote:
None of my git-based overlays from overlays.gentoo.org have
been able to sync this morning. Is the server having
problems or is something wrong with my git?
--Mike
I only have one git overlay from o.g.o. -
On Sunday 22 November 2009 17:28:24 Alan McKinnon wrote:
On Sunday 22 November 2009 10:33:41 Mick wrote:
On Sunday 22 November 2009 03:41:35 sean wrote:
Dale wrote:
I would also add, watch the USE flags. You may be able to
turn some
off, that may help as well.
Dale
Hi group,
My netbook uses an SD card for additional storage. I suspect it of
being buggy so I compiled the kernel with 'CONFIG_MMC_DEBUG=y'.
Questions are: how do I use it to check the SD card? Is this the
correct method?
Maxim
Mick wrote:
I don't mean to hijack the OP's thread, but why would it be that although I
have switched the darned thing off, it still keeps popping up every time I
start kmail?
As the original poster of this thread, have fun, I found my answer,
enjoy your discussion.
On Sunday 22 November 2009 17:27:26 Daniel Pielmeier wrote:
Mick schrieb am 22.11.2009 14:48:
http://www.amd.com/us-
en/assets/content_type/DownloadableAssets/T64X2_animation.wmv
Works fine with gecko-mediaplayer and download-helper.
Yes, thank you. I've installed it now and it looks
Mick wrote:
On Sunday 22 November 2009 14:06:57 Dale wrote:
I went to that link and downloaded the video with no problem at all.
Once it started to playing, I hit the download button and saved it to my
desktop. It plays fine with splayer which uses mplayer as the back
end. It even
Hey,
I did an update lat night and my keyboard stopped working. What makes me
wonder though is that if x starts on it's own then i can type my password
and i get in, and then the keyboard stops working. If i change to another
tty and start x as root, there are no such issues (also starting
On Sunday 22 November 2009 20:37:19 Mick wrote:
On Sunday 22 November 2009 17:28:24 Alan McKinnon wrote:
On Sunday 22 November 2009 10:33:41 Mick wrote:
On Sunday 22 November 2009 03:41:35 sean wrote:
Dale wrote:
I would also add, watch the USE flags. You may be able
to
turn
On Sunday 22 November 2009 20:20:24 Justin wrote:
Alan McKinnon wrote:
On Sunday 22 November 2009 15:05:57 Mike Edenfield wrote:
None of my git-based overlays from overlays.gentoo.org have
been able to sync this morning. Is the server having
problems or is something wrong with my git?
On Sunday 22 November 2009 20:18:17 Maxim Wexler wrote:
Is sdb an SD device? Is the module loaded?
from the OP:
I've had
this problem before which I traced to the lack of support for SD
cards
in the kernel. This time it's something else.
That doesn't answer the question. If support is
Mick schrieb am 22.11.2009 20:02:
On Sunday 22 November 2009 17:27:26 Daniel Pielmeier wrote:
Mick schrieb am 22.11.2009 14:48:
http://www.amd.com/us-
en/assets/content_type/DownloadableAssets/T64X2_animation.wmv
Works fine with gecko-mediaplayer and download-helper.
Yes, thank you. I've
Alan McKinnon schrieb:
I can attest to xorg-server-1.7.1 working just fine here with latest nvidia-
drivers in the tree on amd64
I somehow think the use-flag xinerama might be responsible.
Do you use that one?
I currently rebuild some pkgs without it ...
Hey,
I did an update lat night and my keyboard stopped working. What makes me
wonder though is that if x starts on it's own then i can type my password
and i get in, and then the keyboard stops working. If i change to another
tty and start x as root, there are no such issues (also starting
On Sunday 22 November 2009 22:26:36 Zeerak Waseem wrote:
Hey,
I did an update lat night and my keyboard stopped working. What
makes me
wonder though is that if x starts on it's own then i can type
my password
and i get in, and then the keyboard stops working. If i change
to another
tty
On Sunday 22 November 2009 22:59:18 Stefan G. Weichinger wrote:
Alan McKinnon schrieb:
I can attest to xorg-server-1.7.1 working just fine here with
latest
nvidia- drivers in the tree on amd64
I somehow think the use-flag xinerama might be responsible.
Do you use that one?
I currently
Zeerak Waseem wrote:
Hey,
I did an update lat night and my keyboard stopped working. What makes
me wonder though is that if x starts on it's own then i can type my
password and i get in, and then the keyboard stops working. If i
change to another tty and start x as root, there are no such
On Sun, 22 Nov 2009 23:04:17 +0100, Alan McKinnon
alan.mckin...@gmail.com wrote:
On Sunday 22 November 2009 22:26:36 Zeerak Waseem wrote:
Hey,
I did an update lat night and my keyboard stopped working. What
makes me
wonder though is that if x starts on it's own then i can type
my
Could be baselayout-1. Please take a look at bug #291916 [1]
[1] http://bugs.gentoo.org/291916
Urs
IIRC in a thread from a few months ago there was a tip about putting
the 'pause secs' command into a certain config file, which I can't
recall. Or was it 'delay secs' or 'time secs' ? This was meant for
the hardware to catch its breath so to speak and allow the system to
find the SD card.
On 11/22/2009 1:45 PM, Maxim Wexler wrote:
Hi group,
My netbook uses an SD card for additional storage. I suspect it of
being buggy so I compiled the kernel with 'CONFIG_MMC_DEBUG=y'.
Questions are: how do I use it to check the SD card? Is this the
correct method?
Maxim
If you just want to
On Sunday 22 November 2009 20:29:02 Alan McKinnon wrote:
On Sunday 22 November 2009 20:37:19 Mick wrote:
I don't mean to hijack the OP's thread, but why would it be
that although I
have switched the darned thing off, it still keeps popping up
every time I start kmail?
Because you have
Hello everyone,
I am considering upgrading to a 64 bit CPU but haven't decided on what I
am going to buy. One of the motherboards I am looking at has a P55 chipset
so my question is will the P55 chipset work with Gentoo? If so where in
menuconfig do I configure this?
Thanks
hi,
I have 7 computers in local network and I want them to have always the same
portage files (the ones synchronized with rsync). of course I can use
crontab to make them sync at a specific time but I'm wondering if there's a
better alternative. I saw a wiki page which says to create one local
From: Crístian Viana
To: gentoo-user@lists.gentoo.org
Sent: Sunday, November 22, 2009 10:32 PM
Subject: [gentoo-user] synchronize portage files in a LAN
hi,
I have 7 computers in local network and I want them to have always the same
portage files (the ones synchronized with
Jason Carson wrote:
Hello everyone,
I am considering upgrading to a 64 bit CPU but haven't decided on what I
am going to buy. One of the motherboards I am looking at has a P55 chipset
so my question is will the P55 chipset work with Gentoo? If so where in
menuconfig do I configure this?
Thanks
Crístian Viana wrote:
hi,
I have 7 computers in local network and I want them to have always the
same portage files (the ones synchronized with rsync). of course I can
use crontab to make them sync at a specific time but I'm wondering if
there's a better alternative. I saw a wiki page which
42 matches
Mail list logo
