cervisia for cvskdesvn for subversion.2006/2/14, Iain Buchanan [EMAIL PROTECTED]:
Hi all KDE lovers,Is there a way to use some sort of graphical CVS plugin for konqueror?Or any program other than tkcvs?My main gripe with tkcvs is every time I select remove from archive,
it deletes the file locally
I thought I'd give the latest Rhythmbox a try with the scocial music
audoscrobbler system. When I emerged it it all ran fine but even with
the username and password in the audioscrobbler box I'm not seeing my
last.fm page update. I enebaled musicbrainz in my make.conf in case that
was it but no
On Mon, 2006-02-13 at 18:38 -0600, Boyd Stephen Smith Jr. wrote:
On Sunday 12 February 2006 20:58, Ow Mun Heng [EMAIL PROTECTED] wrote
about '[gentoo-user] is iptables needed on a Bridge':
Just got a bridge setup to put in to monitor network traffic. I wonder
if there's a need to put in
-Original Message-
From: Maarten [mailto:[EMAIL PROTECTED]
Sent: 13 February 2006 17:49
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] Re: Problems with GRUB in the
installation of Gentoo
Richard Fish wrote:
Now, after rebooting, it really went straight, with
On Tuesday 14 February 2006 01:12, Iain Buchanan [EMAIL PROTECTED]
wrote about 'Re: [gentoo-user] Re: trying KDE (again)':
On Tue, 2006-02-14 at 07:40 +0100, Harm Geerts wrote:
On Tuesday 14 February 2006 06:34, Iain Buchanan wrote:
On Tue, 2006-02-14 at 00:54 +0100, Hemmann, Volker Armin
Mick wrote:
If I read you right, then /usr will behave the same with regards to data
fragmentation (in the non-LVM sense of the word) whether in a primary
partition on its own, or in a LV also on its own?
Yes, exactly.
Alexander Skwar
--
Captain: You would have done the same.
Mal: You can
I'm unable to emerge gcc:
17012 all allocated states, 101385 all allocated arcs
20258 all allocated alternative states
4765 all transition comb vector els, 13107 all trans table els
4765 all state alts comb vector els, 13107 all state alts table els
Thank you,
@Ian
i have the old 2.6.14-r5 kernel with nvidia 1.0-6629 in /boot and in
grub.conf, this configuration works.
But i don' think it is necessary to check this out, because as i
mentioned before, i have the displacement with the old and the new
nvidia-driver. So i think it is a
Gilberto Martins wrote:
What is OP ?
_O_riginal _P_oster, I believe.
Maarten
--
gentoo-user@gentoo.org mailing list
Mark Knecht wrote:
Hi,
I just wasted an hour so I thought maybe I could save someone else
the problems. The new MythTV 0.19 rev that's out in portage doesn't
work with an older mythbackend server running version 0.18. Apparently
you have to update both ends at the same time. Of course
On Tuesday 14 February 2006 03:31, Ow Mun Heng [EMAIL PROTECTED] wrote
about 'Re: [gentoo-user] is iptables needed on a Bridge':
On Mon, 2006-02-13 at 18:38 -0600, Boyd Stephen Smith Jr. wrote:
On Sunday 12 February 2006 20:58, Ow Mun Heng [EMAIL PROTECTED]
wrote
about '[gentoo-user] is
On 14 February 2006 09:12, Iain Buchanan wrote:
On Tue, 2006-02-14 at 07:40 +0100, Harm Geerts wrote:
On Tuesday 14 February 2006 06:34, Iain Buchanan wrote:
On Tue, 2006-02-14 at 00:54 +0100, Hemmann, Volker Armin wrote:
On Tuesday 14 February 2006 00:35, Iain Buchanan wrote:
Not likely to happen during installation, but if you use udev, the
device nodes may not exist in your backups (depending upon how you do
your backups...). So a restore of a backup of your root filesystem
from a crash recovery or live CD may not restore any device nodes to
your root
Hi Gentoo-List, I am having a bit of a problem with my gentoo box
running as a gateway/proxy.
I am trying to update it and I my box without my concern want to
emerge xorg ( snip )
emerge -pvDu world returns:
[blocks B ] app-text/xpdf-3.01-r4 (is blocking app-text/poppler-0.5.0-r4)
[ebuild
Allan Spagnol Comar wrote:
[ebuild N] app-text/ghostscript-esp-7.07.1-r8 -X -cjk +cups
-emacs +gtk 2 kB
That's the reason.
PS my USE flags are:
USE=logrotate -X -gnome -motif -kde -qt -png
Add -gtk to your USE flags.
HTH.
-- Remy
Remove underscore and suffix in reply
Allan Spagnol Comar wrote:
Hi Gentoo-List, I am having a bit of a problem with my gentoo box
running as a gateway/proxy.
I am trying to update it and I my box without my concern want to
emerge xorg ( snip )
emerge -pvDu world returns:
[blocks B ] app-text/xpdf-3.01-r4 (is blocking
On Tuesday 14 February 2006 04:41, a tiny voice compelled Boyd Stephen Smith
Jr. to write:
In konsole you'll want to modify the scheme in use to have a transparent
(or partially transparent) background (and maybe background text color).
The WM-wide transparency is handled with the X composite
Hi again.
I'm a bit confused by Gilberto's statement: Of course I had no
network for this.
If you mean that I have no networking because of this error and the
modprobe line above makes no difference then I might be inclined to
swap the network card out for another one.
Yeah, that is what I
thank you guys, problem solved !!!
On 2/14/06, Nagatoro [EMAIL PROTECTED] wrote:
Allan Spagnol Comar wrote:
Hi Gentoo-List, I am having a bit of a problem with my gentoo box
running as a gateway/proxy.
I am trying to update it and I my box without my concern want to
emerge xorg ( snip
On Tue, 2006-02-14 at 03:41 -0600, Boyd Stephen Smith Jr. wrote:
Kicker and Konsole both support a limited form of transparency. You'll set
this limited form up through kicker/koncole specific configurations.
In konsole you'll want to modify the scheme in use to have a transparent
(or
2006/2/14, Iain Buchanan [EMAIL PROTECTED]:
Hi all KDE lovers,
Is there a way to use some sort of graphical CVS plugin for
konqueror?
Or any program other than tkcvs?
On Tue, 2006-02-14 at 09:07 +0100, jose javier parra sanchez wrote:
Drew Tomlinson wrote:
I've tried both zeroing this file and removing it altogether.
Zeroing doesn't work and if I delete it, it never gets recreated.
I've even tried touching it but it remains empty. After
touching it, I chmod it to ntp:ntp but still remains empty.
From 'man ntpd': ...
On Mon, 13 Feb 2006 22:51:48 -0700, Ian wrote:
I installed KDE 3.5 with the split ebuilds, emerging the minimum:
konqueror, kdesktop, kcontrol, konsole, kicker, etc...
I noticed that I dont get that dialog box that appears when KDE finds a
new medium for data. (CD, Jumpdrive)
Do you know
James wrote:
hddtemp /dev/hda for example
/dev/hda: HTS726060M9AT00: 44 C
# hddtemp /dev/hda
/dev/hda: Maxtor 6Y080L0: 22 C
This doesn't look right, as system temperature is shown as 29°C.
At startup hddtemp reported 12 C, while room temperature is 17°C.
Benno
--
gentoo-user@gentoo.org
Jorge Almeida wrote:
cc1: out of memory allocating 8579592 bytes after a total of
7716864 bytes
Swap not enabled? Also, emerge --info output would be helpful.
Benno
--
gentoo-user@gentoo.org mailing list
Hi,
On Tue, 14 Feb 2006 05:43:33 -0600
Boyd Stephen Smith Jr. [EMAIL PROTECTED] wrote:
On Tuesday 14 February 2006 03:31, Ow Mun Heng [EMAIL PROTECTED] wrote
about 'Re: [gentoo-user] is iptables needed on a Bridge':
[...]
If you /do/ want to do packet filtering on br0, I belive you can
On Tuesday 14 February 2006 06:34, Iain Buchanan wrote:
On Tue, 2006-02-14 at 00:54 +0100, Hemmann, Volker Armin wrote:
On Tuesday 14 February 2006 00:35, Iain Buchanan wrote:
Welcome to my post, and remember to leave your flamewars at the door :)
I've just installed KDE for the first
Hi list,
i would like to buy a motherboard which uses a K8M800 chipset. Does
Xorg drivers offers 2D/3D acceleration for this card? Anyone has
experience with it using gentoo?
Best regards,
MC
--
gentoo-user@gentoo.org mailing list
I'm trying to emerge php here and do some playing around. I don't have apache
on this box but installed monkeyd as a light weight webserver. Emerge php
fails as below
checking for tgetent in -lncurses... no
checking for tgetent in -ltermcap... no
checking for readline in -lreadline... no
On 14 Feb 2006, at 13:27, Gilberto Martins wrote:
... I tried to compile the kernel
following the guidelines in the handbook, like make menuconfig, make
and make module_install. But it seems the the modules were not
generated.
I tried find /usr/ -iname *3c59x* but only the source code was
Now when i switch with CTRL-ALT-F1-6 through my consoles they are
displaced. On CTRL-ALT-F7 where my X-Server runs the picture is fine.
When i fix it in the consoles with the Auto-Button the X-Server on
F7 is displaced.
The auto button is for an adustment on your monitor? If so, then
you can
I had one of this Via cards, different than yours, it was a KM400, but
they're all Unychrome family (still have it onboard, only disabled),
and it was a hell of a time getting it to work, in fact, I had to get
an unstable Xorg, compile some stuff myself and getting a new opengl
driver to copy over
Hi Daniel,
thanks for sharing your experience. The only problem in getting
an Nvidia or ATI video card is that they rely on closed source
proprietary drivers (apart for older ATI card for which the xorg
radeon drivers works well); on the contrary i've seen that the
unichrome driver became open
On 2/13/06, Iain Buchanan [EMAIL PROTECTED] wrote:
However, I have some eye candy I want to bring from Gnome - transparent
konsole is the first.
Right click in the Konsole window, select Settings-Schema- and a
transparent schema. You can also modify an existing or create a new
schema with
My system has this message in the log from several times:
Feb 14 10:41:45 archie hal.hotplug[11262]: DEVPATH is not set (subsystem
pci)
I just updated the system last week and that included a bump in udev and
hal. However, another system which is nearly the same architecture was
also updated
Hello to everybody,
Since some day I get this error while starting Gnome:
GConf Error: Error contactiong the configuration server; it may be
necessary to enable necessario TCP/IP support for ORBit or there may be
an old NFS lock due to system crash. Please see
hey, gilberto, how about the grub trouble?
use udev, check this out:
http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?full=1#book_part1_chap9
have you heard of RR4? is a live dvd distro based on gentoo:
http://www.lxnaydesign.net/index.php?option=com_contenttask=viewid=16Itemid=27
and
On Mon, 13 Feb 2006 23:19:10 +, Mick wrote:
Their server sends a test cookie which discriminates against decent
browsers! Firefox won't play. Opera falls apart irrespective of how I
set it to identify itself. The same happens with Konqueror in the
default user agent setting, but it
I guess that's my problem too. How do I know what's using OSS? Can
I just disable it completely while leaving ALSA intact?
ALSA usually emulates OSS (it's an kernel building option).
You can switch it off, but unfortunately there are still a lot of apps
which only can output sound via OSS:
It is not just the displacement, as i mentionend before the picture is
unsharp in some places too. Could this also be fixed with xvidtune.
The auto button is for an adustment on your monitor? If so, then
you can fix the X server displacement by creating a better modeline
with xvidtune.
OT
Is it possible to install lm_sensors with gentoo-kernel too, or only
with genkernel? I tried with gentoo-sources, but got this error:
_
* Determining the location of the kernel source code
* Found kernel source directory:
*
On Tue, 2006-02-14 at 15:04 +0930, Iain Buchanan wrote:
yes, but you should be able to specify a + OR - for the x and y offset
as well:
-geometry WxH+Xoffs+Yoffs where
W: width
H: height
Xoffs: x offset*
Yoffs: y offset*
* x is relative to the left screen edge, if positive, and
On Tue, 14 Feb 2006, Benno Schulenberg wrote:
Jorge Almeida wrote:
cc1: out of memory allocating 8579592 bytes after a total of
7716864 bytes
Swap not enabled? Also, emerge --info output would be helpful.
Swap was enabled.
$ emerge info
Portage 2.0.54 (default-linux/x86/2005.1,
Marco Calviani wrote:
the unichrome driver became open source, but however
googling around i've seen many people getting into trouble for
make it working
Not many. It's the ones with troubles that are the loudest. :)
Getting it to work used to be a bit complicated, as you have X and
Jarry schreef:
OT
Is it possible to install lm_sensors with gentoo-kernel too
Yes, it is.
I tried with gentoo-sources, but got this error:
_ *
Determining the location of the kernel source code * Found kernel
source directory: *
Holly Bostick wrote:
This error means that your /usr/src/linux symlink points to unconfigured
kernel sources. Many, if not all, external packages that compile against
the kernel have this requirement.
Yes, you are right. My fault, because I always move /usr/src/linux/.config
to
-Original Message-
From: Benno Schulenberg [mailto:[EMAIL PROTECTED]
Sent: 13 February 2006 23:03
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] Kmail Spellchecking Disabled?
Mick wrote:
For some reason when I reply or create a new message in Kmail the
dynamic
Ernie Schroder wrote:
I tried all this a while back and it used too much cpu. It slowed my
XP2400/1gigRAM system down to unacceptable levels. Has this been corrected in
KDE 3.5.x?
Try enabling the backingstore as suggested on the wiki. That solved the
slowness problem
for me. I'm
Hi,
I still can't see KDE 3.5 in the stable x86. Since I'd like to try it,
but I also don't like to rely on unstable (i.e. crashing, misworking)
apps very much, I have a couple of questions for you...
1)What is the timeline for having 3.5 stable? If I have to wait still 1
or 2 weeks, I don't
On 2/14/2006 6:32 AM Benno Schulenberg wrote:
Drew Tomlinson wrote:
I've tried both zeroing this file and removing it altogether.
Zeroing doesn't work and if I delete it, it never gets recreated.
I've even tried touching it but it remains empty. After
touching it, I chmod it to ntp:ntp
On Tue, 14 Feb 2006, b.n. wrote:
Hi,
I still can't see KDE 3.5 in the stable x86. Since I'd like to try it, but I
also don't like to rely on unstable (i.e. crashing, misworking) apps very
much, I have a couple of questions for you...
1)What is the timeline for having 3.5 stable? If I have
Michael Kintzios wrote:
-Original Message-
From: Benno Schulenberg [mailto:[EMAIL PROTECTED]
Sent: 13 February 2006 23:03
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] Kmail Spellchecking Disabled?
Ctrl+N, Alt+O, A.
(New Message, Options, Auto.Spell. -- it
If I were to setup a KDE 3.5 environment, what packages aside from kde-base should I setup with the ~amd64 exception in my /etc/portage/package.keywords ?On 2/14/06,
Steven S. [EMAIL PROTECTED] wrote:
On Tue, 14 Feb 2006, b.n. wrote: Hi, I still can't see KDE 3.5 in the stable x86. Since I'd like
Michael Kintzios wrote:
From: Benno Schulenberg [mailto:[EMAIL PROTECTED]
(New Message, Options, Auto.Spell. -- it remembers the
setting.)
Thank you! I'll try it again when I get home. I guess this is
not available in the GUI? (because I couldn't find it).
You mean in Settings
# esearch mod_php
[ Results for search key : mod_php ]
[ Applications found : 1 ]
* dev-php/mod_php
Latest version available: 4.4.0-r9
Latest version installed: [ Not Installed ]
Size of downloaded files: 5,071 kB
Homepage:http://www.php.net/
Description: Apache
On 2/14/06, b.n. [EMAIL PROTECTED] wrote:
2)Does kde 3.5 pulls in a lot of ~x86 dependecies?
You can determine this yourself:
ACCEPT_KEYWORDS=~x86 emerge -pv kde-base/kdebase-meta
3)What are current known bugs/instabilities/issues/what of KDE 3.5
packages I should be aware of? I don't use
On 2/14/06, Ryan Holt [EMAIL PROTECTED] wrote:
If I were to setup a KDE 3.5 environment, what packages aside from kde-base
should I setup with the ~amd64 exception in my /etc/portage/package.keywords
?
ACCEPT_KEYWORDS=~amd64 emerge -pv kde-base/kdebase-meta
I highly recommend using the -meta
Thanks Benno!
2006/2/14, Benno Schulenberg [EMAIL PROTECTED]:
Marco Calviani wrote:
the unichrome driver became open source, but however
googling around i've seen many people getting into trouble for
make it working
Not many. It's the ones with troubles that are the loudest. :)
On Tuesday 14 February 2006 15:27, a tiny voice compelled Ernie Schroder to
write:
# esearch mod_php
[ Results for search key : mod_php ]
[ Applications found : 1 ]
* dev-php/mod_php
Latest version available: 4.4.0-r9
Latest version installed: [ Not Installed ]
Size of
Jorge Almeida wrote:
Swap was enabled.
$ emerge info
[...]
Looks fine.
Have you tried emerging gcc again, a few times, and does it fail
every time in the same spot with the same error? What error does
kpdf give? Does it too fail every time at the same place? Have
you tried closing
On Fri, 10 Feb 2006 01:43:21 -0600, Boyd Stephen Smith Jr. wrote:
ln doesn't overwrite symlinks to directories, although this is not
mentioned in the man page. Either delete the link first, or emerge
your new kernel source with the symlink USE flag.
That's just not true. Heck, I thought
On Tuesday 14 February 2006 15:14, Neil Bothwick [EMAIL PROTECTED] wrote
about 'Re: [gentoo-user] Dumb symlink question':
On Fri, 10 Feb 2006 01:43:21 -0600, Boyd Stephen Smith Jr. wrote:
ln doesn't overwrite symlinks to directories, although this is not
mentioned in the man page. Either
On Tuesday 14 February 2006 07:26, Ernie Schroder [EMAIL PROTECTED]
wrote about 'Re: [gentoo-user] Re: trying KDE (again)':
On Tuesday 14 February 2006 04:41, a tiny voice compelled Boyd Stephen
Smith
Jr. to write:
In konsole you'll want to modify the scheme in use to have a
transparent
On 2/14/06, Iain Buchanan [EMAIL PROTECTED] wrote:
aha, thank you for that great explanation. However, I have edited
xorg.conf as required with
Section Extensions
Option Composite Enable
EndSection
and
Option RenderAccel true
Option AllowGLXWithComposite true
(I have an ati) but I
On Tue, 2006-02-14 at 18:53 +0100, Daniel Pielmeier wrote:
It is not just the displacement, as i mentionend before the picture is
unsharp in some places too. Could this also be fixed with xvidtune.
possibly. Did you try the shorter / taller / wider / narrower buttons?
Or the auto button? (I've
On Tue, 2006-02-14 at 16:06 +0100, Hemmann, Volker Armin wrote:
On Tuesday 14 February 2006 06:34, Iain Buchanan wrote:
[snip]
konsole --geometry -0-0
[snip]
I tried - instead of -- and the results are the same: -0-0 is not
implemented properly...
what do you mean with 'properly'?
That did it! Now I have a semi-transparent konsole, which always appears
at the bottom right - thanks!!
--
Iain Buchanan iain at netspace dot net dot au
Alas, I am dying beyond my means.
-- Oscar Wilde [as he sipped champagne on his deathbed]
--
gentoo-user@gentoo.org mailing
On Tuesday 14 February 2006 17:43, Benno Schulenberg wrote:
Jorge Almeida wrote:
parser error : out of memory error
/bin/sh: line 1: 3831 Segmentation fault
Doesn't look good. :(
No it doesn't, but there has to be a reason why he's out of memory... What is
the output of free,
On Tuesday 14 February 2006 15:47, b.n. wrote:
However I did it now and I noticed the USE flag kdexdeltas, which
description on gentoo-portage.com is:
kdexdeltas - Makes kde ebuilds download binary diffs rather than
entire new tarballs for every new release
how is it supposed to work?!
On Tuesday 14 February 2006 16:09, Richard Fish wrote:
Which ATI do you have? The ATI drivers (fglrx) does not support
composite yet. Both of the above options are only for nvidia users, I
believe.
Enabling the Composite extension should work for all drivers, it isn't
accelerated on fglrx,
I had a very similar problem, but I actually got something in my
/var/log/mythtv/mythbackend.log file:
Starting up as the master server.
/mnt/store//nfslockfile.lock: Permission denied
Unable to open lockfile!
Be sure that '/mnt/store/' exists and that both
the directory and that file are
On Tue, 14 Feb 2006, Zac Slade wrote:
On Tuesday 14 February 2006 17:43, Benno Schulenberg wrote:
Jorge Almeida wrote:
parser error : out of memory error
/bin/sh: line 1: 3831 Segmentation fault
Doesn't look good. :(
No it doesn't, but there has to be a reason why he's
On Tuesday 14 February 2006 19:25, Jorge Almeida wrote:
$ cat /proc/sys/vm/swappiness
60
$ cat /proc/sys/vm/overcommit_memory
0
$ cat /proc/sys/vm/overcommit_ratio
50
That was a long shot, but just wanted to make sure the system was allowing
overcommit.
On 2/14/06, Jorge Almeida [EMAIL PROTECTED] wrote:
$ free
total used free sharedbuffers
cached
Mem: 1035204 968140 67064 0 270248
538412
-/+ buffers/cache: 159480 875724
On 2/14/06, Iain Buchanan [EMAIL PROTECTED] wrote:
On Tue, 2006-02-14 at 18:53 +0100, Daniel Pielmeier wrote:
It is not just the displacement, as i mentionend before the picture is
unsharp in some places too. Could this also be fixed with xvidtune.
If you have a crt, then is it a focus
On Tue, 14 Feb 2006, Zac Slade wrote:
Just an absolute blind stab in the dark. what does df -h give you?
$ df -h
FilesystemSize Used Avail Use% Mounted on
/dev/hda3 2.0G 281M 1.7G 15% /
udev 506M 300K 506M 1%
On Tue, 14 Feb 2006, Richard Fish wrote:
Also, to test whether your system can make large memory allocations, you can do:
python -c s='x'*(4*(1024*1024))
python -c s='x'*(8*(1024*1024))
python -c s='x'*(16*(1024*1024))
python -c s='x'*(32*(1024*1024))
python -c s='x'*(64*(1024*1024))
python -c
On 2/14/06, Jorge Almeida [EMAIL PROTECTED] wrote:
[EMAIL PROTECTED] ~ $ python -c s='x'*(4*(1024*1024))
~
[EMAIL PROTECTED] ~ $ python -c s='x'*(8*(1024*1024))
~
[EMAIL PROTECTED] ~ $ python -c s='x'*(16*(1024*1024))
~
[EMAIL
On 2/14/06, Richard Fish [EMAIL PROTECTED] wrote:
ulimit -l -m
Or better: ulimit -a
-Richard
--
gentoo-user@gentoo.org mailing list
On Tue, 14 Feb 2006, Richard Fish wrote:
Any chance this is a resource limit issue?
ulimit -l -m
Nope...
$ ulimit -l -m
max locked memory (kbytes, -l) 32
max memory size (kbytes, -m) unlimited
Jorge
--
gentoo-user@gentoo.org mailing list
On Tue, 14 Feb 2006, Richard Fish wrote:
Or better: ulimit -a
$ ulimit -a
core file size (blocks, -c) 0
data seg size (kbytes, -d) 58593
file size (blocks, -f) unlimited
pending signals (-i) 8191
max locked memory (kbytes, -l) 32
max
quoth the Ian:
Hey everyone!
If you want to get rid of a (working) G4 iMac, and are willing to ship to
Canada,
please let me know. I dont have a lot of money right now as I am a student,
($400-$450)
but we could maybe work something out. Thanks everyone!!
Cheers,
Ian
Have you checked
On 2/14/06, Jorge Almeida [EMAIL PROTECTED] wrote:
On Tue, 14 Feb 2006, Richard Fish wrote:
data seg size (kbytes, -d) 58593
virtual memory (kbytes, -v) 58593
These are preventing any process spawned by this user from allocating
more than 58593 bytes of memory (which is why
this is a test mail.
ignore
--
Wang ShaoChun(王绍春) [EMAIL PROTECTED]
PH.D Candidate
Laboratory of Computer Science, Institute of Software
Chinsese Academy of Sciences
--
gentoo-user@gentoo.org mailing list
On Tue, 14 Feb 2006, Richard Fish wrote:
On 2/14/06, Jorge Almeida [EMAIL PROTECTED] wrote:
On Tue, 14 Feb 2006, Richard Fish wrote:
data seg size (kbytes, -d) 58593
virtual memory (kbytes, -v) 58593
These are preventing any process spawned by this user from allocating
I was trying to configure my own BIND Dynamic DNS and everything was
ok, the daemon start normally, but when the client send it's hostname
the output of the messages log in the server seems like this:
dhcpd: Unable to add forward map from american.cell.com to 192.168.0.128: connection refused
I
Does any know another program lancher like gmrun, grun?
--
Wang ShaoChun(王绍春) [EMAIL PROTECTED]
PH.D Candidate
Laboratory of Computer Science, Institute of Software
Chinsese Academy of Sciences
--
gentoo-user@gentoo.org mailing list
i have the exact problem with kernel 2.15 and framebuffer disabled.
it used to work fine with the same drivers and the same kernel before
the only thing that changed in my 2 isntalls is that the new one has
gcc-3.4.4 while in the old i didnt' update gcc
On 2/14/06, Iain Buchanan [EMAIL PROTECTED]
88 matches
Mail list logo