Steve Brenneis wrote:
> Actually, none of that was my problem. The problem was solved by
> commenting out the ModulePath statement in xorg.conf. Now I just have to
> figure out what may have gotten broken by doing that. I think I'll just
> unmerge everything (in Xorg) and start over.
Nothing shoul
On 7/15/06, Michael [Plouj] Ploujnikov <[EMAIL PROTECTED]> wrote:
There must be a good reason it isn't stable yet:
http://www.gentoo-portage.com/net-print/cups
On 7/15/06, Kevin O'Gorman <[EMAIL PROTECTED]> wrote:
> I've been running cups happily on this box for a couple of years. It serves
> p
Benno Schulenberg wrote:
> Steve Brenneis wrote:
>
>> Benno Schulenberg wrote:
>>
>>> You have no video card? Put at least VIDEO_CARDS="vesa" in
>>> your /etc/make.conf, and add "nv" or "radeon" or whatever your
>>> box has.
>>>
>> I've never seen any instruction to set this variabl
On 7/15/06, Korthrun <[EMAIL PROTECTED]> wrote:
On 7/14/06, Korthrun <[EMAIL PROTECTED]> wrote:
> Heyyas,
>
> I'm running:
> Xorg 7.0-r1
> nvidia-kernel 1.0.8762
> nvidia-glx 1.0.8762
>
> I've followed the guide at
> http://www.gentoo.org/doc/en/nvidia-guide.xml with the following
> exc
On 7/14/06, Korthrun <[EMAIL PROTECTED]> wrote:
Heyyas,
I'm running:
Xorg 7.0-r1
nvidia-kernel 1.0.8762
nvidia-glx 1.0.8762
I've followed the guide at
http://www.gentoo.org/doc/en/nvidia-guide.xml with the following
exceptions. I'm using a kernel.org kernel not a portage kernel, and I
Hemmann, Volker Armin wrote:
On Saturday 15 July 2006 01:01, Ryan Tandy wrote:
Korthrun wrote:
# Load "dri"
Uncomment that line, and restart X.
no.
That has to be commented - or removed.
Read the docs. Read the nvidia readme.
Oops, my bad - I've never had an nvidia card, sorry. A
pat wrote:
Hi all,
I have question about alsa configuration. I know how to configure the driver
etc., bud during the configuration I've found that the condifuration is
mentioned in 3 files:
1) /etc/modules.d/alsa
2) /etc/modules.conf
3) /etc/modprobe.conf
The part I'm talking about is:
alias /d
On 7/15/06, Richard Fish <[EMAIL PROTECTED]> wrote:
On 7/15/06, Hemmann, Volker Armin <[EMAIL PROTECTED]> wrote:
> no, you should not. This last 'stanza' is not needed - maybe even harmfull.
> Remove it.
Oops, your right.
Looks like an artifact (both in the config and my brain) from my ATI
days
On 7/15/06, Hemmann, Volker Armin <[EMAIL PROTECTED]> wrote:
On Friday 14 July 2006 14:30, Korthrun wrote:
> Heyyas,
>
> I'm running:
> Xorg 7.0-r1
> nvidia-kernel 1.0.8762
> nvidia-glx 1.0.8762
>
> I've followed the guide at
> http://www.gentoo.org/doc/en/nvidia-guide.xml with the foll
There must be a good reason it isn't stable yet:
http://www.gentoo-portage.com/net-print/cups
On 7/15/06, Kevin O'Gorman <[EMAIL PROTECTED]> wrote:
I've been running cups happily on this box for a couple of years. It serves
print requests from two other computers I have, one running Ubuntu (als
I've been running cups happily on this box for a couple of years. It serves
print requests from two other computers I have, one running Ubuntu (also
running cups), and the other running WinXP.
With the upgrade to 1.2.1-r2 from 1.1.23, some probelms arose:
1) neither of the other machines can pri
On Saturday 15 July 2006 14:15, Uwe Thiem wrote:
> On 15 July 2006 18:25, Richard Fish wrote:
> > On 7/15/06, rob <[EMAIL PROTECTED]> wrote:
> > > emerged most of the stuff in media-tv but I can't get anyone of thease
> > > to show TV most say device not configured. Evan the ones that I know
> > >
I upgraded to X11 7.0.
Now when KDE starts, I get a failure (SEGV something-or-other) from kcminit.
I re-emerged kdebase-3.5.2 (which contains kcminit) to no effect.
Ideas?
David
--
gentoo-user@gentoo.org mailing list
Benno Schulenberg wrote:
> Seba wrote:
>> I have a problem to play or decode only mp3 (no problem with ogg
>> or wave), I play mp3 with noatun or amarok and decode it with
>> k3b, the result is noise.
>
> Hello Seba,
>
> Please stop sending the same mail over and over again. You will not
> see
Seba wrote:
> I have a problem to play or decode only mp3 (no problem with ogg
> or wave), I play mp3 with noatun or amarok and decode it with
> k3b, the result is noise.
Hello Seba,
Please stop sending the same mail over and over again. You will not
see this mail appear in your inbox, because
[EMAIL PROTECTED] wrote:
> On Sat, 15 Jul 2006, Meino Christian Cramer wrote:
> > there are several mails replied only with a
> > link to http://en.fon.com/ ???
> >
> > SPAM???
>
> Well it's a little spammy in that it doesn't really address the
> original post
So it is pure spam. Please ban wiese
PaulNM wrote:
> Seba wrote:
>> Hi all,
>> my name is Seba, I'm a new gentoo user and this is my first post.
>> I have a problem to play or decode only mp3 (no problem with ogg or wave),
>> I play mp3 with noatun or amarok and decode it with k3b, the result is
>> noise.
>>
>> My use flags:
>> USE= "
Hi all,
my name is Seba, I'm a new gentoo user and this is my first post.
I have a problem to play or decode only mp3 (no problem with ogg or wave),
I play mp3 with noatun or amarok and decode it with k3b, the result is
noise.
My use flags:
USE= "X kde qt ithreads ncurses nptl nptlonly radeon zlib
Gentoo wrote:
> After upgrading to x11 7.0, following the migration guide, I get the
> following error from startx:
>
> Fatal server error:
> could not open default font 'fixed'
> XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
> after 0 requests (0 known processed) wit
Well it's a little spammy in that it doesn't really address the original post
but it does seem like an interesting project. I'd be interesd in what others
think of this.
Michael
On Sat, 15 Jul 2006, Meino Christian Cramer wrote:
Hi,
there are several mails replied only with a
link to http://
A problem has just developed seemingly out of nowhere with kontact. The
problem is two fold
1. when I try to launch kontact the icon bounces around as usual but the
window does not appear. If I do a ps -x there are two relavent lines
PID ? S 0:00 kontact
PID ? Rl 0:20 kontact
trying to launch
Hi,
there are several mails replied only with a
link to http://en.fon.com/ ???
Accident?
Advertising?
More or less bad joke?
SPAM???
mcc
--
gentoo-user@gentoo.org mailing list
On 15 July 2006 18:25, Richard Fish wrote:
> On 7/15/06, rob <[EMAIL PROTECTED]> wrote:
> > emerged most of the stuff in media-tv but I can't get anyone of thease
> > to show TV most say device not configured. Evan the ones that I know
> > point to /dev/video0
> > I think I did everything right.
>
Richard Fish wrote:
> On 7/15/06, Mike <[EMAIL PROTECTED]> wrote:
>> When I compile xfce-extra/terminal-0.2.4-r1 it gives this error:
>>
>> /usr/lib/opengl/nvidia/lib/libGLcore.so.1: undefined reference to
>> `_nv16gl'
>
> Try:
>
> eselect opengl set xorg-x11
> emerge xfce-extra/terminal
> es
http://en.fon.com/
On Sat, 15 Jul 2006 18:22:59 +0200 (CEST)
Meino Christian Cramer <[EMAIL PROTECTED]> wrote:
> Hi,
>
> For Emacs there are some EMail-interfaces to read email from the
> $HOME/Mail directory.
>
> Is there anything like that for VIM ? Best would be, if I could use
> my old
On 7/15/06, Mike <[EMAIL PROTECTED]> wrote:
When I compile xfce-extra/terminal-0.2.4-r1 it gives this error:
/usr/lib/opengl/nvidia/lib/libGLcore.so.1: undefined reference to
`_nv16gl'
Try:
eselect opengl set xorg-x11
emerge xfce-extra/terminal
eselect opengl set nvidia
-Richard
--
gento
On Saturday 15 July 2006 09:27, Gentoo wrote:
> After upgrading to x11 7.0, following the migration guide, I get the
> following error from startx:
>
> Fatal server error:
> could not open default font 'fixed'
> XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
>after 0
On 7/15/06, Hemmann, Volker Armin <[EMAIL PROTECTED]> wrote:
no, you should not. This last 'stanza' is not needed - maybe even harmfull.
Remove it.
Oops, your right.
Looks like an artifact (both in the config and my brain) from my ATI
days. Apologies to korthrun for the bogus info.
-Richard
On 7/15/06, rob <[EMAIL PROTECTED]> wrote:
emerged most of the stuff in media-tv but I can't get anyone of thease to
show TV most say device not configured. Evan the ones that I know point
to /dev/video0
I think I did everything right.
pleas help or tell me of a better card to use.
Are you sur
On 7/15/06, Paul Stear <[EMAIL PROTECTED]> wrote:
Hi all,
Last week I needed to use the scanner part of my MFP and managed to get thing
working by using Neil's suggestion that I enter a USB rule
in /etc/udev/rules.d/10-udev.rules, so I entered the following:-
SYSFS{product}=="USB MFP", SYSFS{manu
Someone wrote:
> After upgrading to x11 7.0, following the migration guide, I get
> the following error from startx:
>
> Fatal server error:
> could not open default font 'fixed'
Post your xorg.conf. And an 'ls -l /usr/share/fonts/'.
Also see http://wiki.x.org/wiki/FAQErrorMessages .
Benno
--
On Sat, Jul 15, 2006 at 06:22:59PM +0200, Penguin Lover Meino Christian Cramer
squawked:
> Each mail is in a separate file, which is simply numbered per folder.
>
If each mail is a separate mail, it is most likely _not_ mbox.
Probably maildir.
Googling shows several mailing macros for Vim, bu
Mark Knecht wrote:
> Hi,
> Sorry this is a little long but it's mostly cut and paste stuff.
> Using the instructions here:
>
> http://gentoo-wiki.com/HOWTO_Modular_Xorg
>
> I am at the point of emerging xorg-x11-7. It fails pretty much
> immediately with this message:
>
> checking for pkg-conf
Seba wrote:
> Hi all,
> my name is Seba, I'm a new gentoo user and this is my first post.
> I have a problem to play or decode only mp3 (no problem with ogg or wave),
> I play mp3 with noatun or amarok and decode it with k3b, the result is
> noise.
>
> My use flags:
> USE= "X kde qt ithreads ncurs
On 7/15/06, Daniel Iliev <[EMAIL PROTECTED]> wrote:
The opposite case is if there is no such line, the you should add it:
echo 'mail-filter/qmail-scanner "x86"' >> /etc/portage/package.keywords
FYI, the correct syntax to remove the global ~x86 keyword using
package.keywords should be:
mail-fi
When I compile xfce-extra/terminal-0.2.4-r1 it gives this error:
/usr/lib/opengl/nvidia/lib/libGLcore.so.1: undefined reference to
`_nv16gl'
/usr/lib/opengl/nvidia/lib/libGLcore.so.1: undefined reference to
`_nv03gl'
/usr/lib/opengl/nvidia/lib/libGLcore.so.1: undefined reference to
`_nv000
Does someone know which of the dozens of cd-players for gentoo
is able to play copy-controlled cd's (the cd's that install a
player first under Windows).
My discman can play them, my home audioset can play them so
i guess there must be a cdplayer for gentoo that can do it.
Xmms and xine won't.
--
We received your mail, stop sending it in! If it doesn't appear on your
gmail account, it's a known gmail "feature".
Anyway for mp3 ripping, did you try Grip?
m.
--
gentoo-user@gentoo.org mailing list
Hi,
For Emacs there are some EMail-interfaces to read email from the
$HOME/Mail directory.
Is there anything like that for VIM ? Best would be, if I could use
my old EMail directory structure -- I think it is called "mbox", but
I am not sure. It looks like that:
$HOME/Mail//1
Hi all,
my name is Seba, I'm a new gentoo user and this is my first post.
I have a problem to play or decode only mp3 (no problem with ogg or wave),
I play mp3 with noatun or amarok and decode it with k3b, the result is
noise.
My use flags:
USE= "X kde qt ithreads ncurses nptl nptlonly radeon zlib
Hi,
Sorry this is a little long but it's mostly cut and paste stuff.
Using the instructions here:
http://gentoo-wiki.com/HOWTO_Modular_Xorg
I am at the point of emerging xorg-x11-7. It fails pretty much
immediately with this message:
checking for pkg-config... /usr/bin/pkg-config
checking pkg
Hi all,
my name is Seba, I'm a new gentoo user and this is my first post.
I have a problem to play or decode only mp3 (no problem with ogg or wave),
I play mp3 with noatun or amarok and decode it with k3b, the result is
noise.
My use flags:
USE= "X kde qt ithreads ncurses nptl nptlonly radeon zlib
(Sorry if this is a duplicate - without X, I've got primitive tools).
---
After upgrading to x11 7.0, following the migration guide, I get the
following error from startx:
Fatal server error:
could not open default font 'fixed'
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.
From: Allan Gottlieb <[EMAIL PROTECTED]>
Subject: Re: [gentoo-user] Build error: gnumeric-1.4.3-r3
Date: Sat, 15 Jul 2006 10:58:01 -0400
> At Sat, 15 Jul 2006 16:18:35 +0200 (CEST) Meino Christian Cramer <[EMAIL
> PROTECTED]> wrote:
>
> > From: Allan Gottlieb <[EMAIL PROTECTED]>
> > Subject: Re:
Hi all,
my name is Seba, I'm a new gentoo user and this is my first post.
I have a problem to play or decode only mp3 (no problem with ogg or wave),
I play mp3 with noatun or amarok and decode it with k3b, the result is
noise.
My use flags:
USE= "X kde qt ithreads ncurses nptl nptlonly radeon zlib
At Sat, 15 Jul 2006 16:18:35 +0200 (CEST) Meino Christian Cramer <[EMAIL
PROTECTED]> wrote:
> From: Allan Gottlieb <[EMAIL PROTECTED]>
> Subject: Re: [gentoo-user] Build error: gnumeric-1.4.3-r3
> Date: Sat, 15 Jul 2006 10:11:55 -0400
>
>> At Fri, 14 Jul 2006 22:33:45 -0400 Allan Gottlieb <[EMAIL
> -Original Message-
> From: Daniel Drake [mailto:[EMAIL PROTECTED]
> Sent: Friday, July 14, 2006 6:59 PM
> To: gentoo-user@lists.gentoo.org
> Subject: Re: [gentoo-user] Linux Kernel Warning
>
> Daniel Drake wrote:
> > However, there is a new security bug in the wild, with similar
> > imp
Sorry to all, I've disabled mic boost. Enable it is the solution.
Pat
pat wrote:
> Hi all,
>
> I have IBM TP T43 with internal microphone. I need to use it (yes, skype),
> but I
> have no idea how to do it. I've used google, but without success - or I don't
> know what to search :-(
>
From: Allan Gottlieb <[EMAIL PROTECTED]>
Subject: Re: [gentoo-user] Build error: gnumeric-1.4.3-r3
Date: Sat, 15 Jul 2006 10:11:55 -0400
> At Fri, 14 Jul 2006 22:33:45 -0400 Allan Gottlieb <[EMAIL PROTECTED]> wrote:
>
> > Has anyone solved this problem. I have it too as I mentioned in a
> > prev
At Fri, 14 Jul 2006 22:33:45 -0400 Allan Gottlieb <[EMAIL PROTECTED]> wrote:
> Has anyone solved this problem. I have it too as I mentioned in a
> previous post.
It has been solved (at least for me). A thank you to whoever fixed
it. My 2.14 is now fully installed. With Xorg and gnome upgraded
Le 15 juillet à 14:57:43 pat <[EMAIL PROTECTED]> écrit notamment:
| Hi all,
>
| I have IBM TP T43 with internal microphone. I need to use it (yes, skype),
but I
| have no idea how to do it. I've used google, but without success - or I don't
| know what to search :-(
>
| Please, could someone poin
After upgrading to x11 7.0, following the migration guide, I get the
following error from startx:
Fatal server error:
could not open default font 'fixed'
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
I h
I just bought a hauppauge winTV-PVR-150
kernel linux-2.6.16-gentoo-r12
I compiled all the stuff for the bttv driver
CONFIG_VIDEO_BT848=y
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_SAA6588=y
CONFIG_VIDEO_CX88_VP3054=y
CONFIG_VIDEO_AUDIO_DECODER=y
CONFIG_VIDEO_DECODER=y
CONFIG_DVB=y
CONFIG_DVB_CORE=y
CONF
Hi all,
I have IBM TP T43 with internal microphone. I need to use it (yes, skype), but I
have no idea how to do it. I've used google, but without success - or I don't
know what to search :-(
Please, could someone point me to documentation how to enable microphone with
alsa ???
Thanks a lot.
Hi all,
Last week I needed to use the scanner part of my MFP and managed to get thing
working by using Neil's suggestion that I enter a USB rule
in /etc/udev/rules.d/10-udev.rules, so I entered the following:-
SYSFS{product}=="USB MFP", SYSFS{manufacturer}=="EPSON", GROUP:="scanner",
MODE:="066
In <[EMAIL PROTECTED]> [EMAIL PROTECTED] (Neil Bothwick) writes:
>--Sig__YUvb3qllmvtrcv7Xi4MS.L
>Content-Type: text/plain; charset=US-ASCII
>Content-Transfer-Encoding: quoted-printable
>On Fri, 14 Jul 2006 16:06:30 + (UTC), Konstantinos Agouros wrote:
>> is there a way to leave this package
On Friday 14 July 2006 14:30, Korthrun wrote:
> Heyyas,
>
> I'm running:
> Xorg 7.0-r1
> nvidia-kernel 1.0.8762
> nvidia-glx 1.0.8762
>
> I've followed the guide at
> http://www.gentoo.org/doc/en/nvidia-guide.xml with the following
> exceptions. I'm using a kernel.org kernel not a portage
On Friday 14 July 2006 18:51, Richard Fish wrote:
> On 7/14/06, Korthrun <[EMAIL PROTECTED]> wrote:
> > Section "DRI"
> > Group "video"
> > Mode 0660
> > EndSection
> >
> > ##End xorg.conf
> >
> > I've tried it both with and without this last stanza regarding
> > DRI.
>
> Y
On Saturday 15 July 2006 01:01, Ryan Tandy wrote:
> Korthrun wrote:
> > # Load "dri"
>
> Uncomment that line, and restart X.
no.
That has to be commented - or removed.
Read the docs. Read the nvidia readme.
--
gentoo-user@gentoo.org mailing list
Suranga Kasthuriarachchi wrote:
Dear Sam,
Now im installing Qmail-scanner 2.01, Please guide me to installe the
Qmail-scanner 1.25.
thanking & rgds,
Suranga.
Obviously you are using '~arch' or you have explicitly set "~arch" for
this package. In either case the solution is to reverse the
Hello, everyone
I had to reemerge FireFox and ThunderBird due to "emerge --depclean".
Both compiled without complains but the themes and extensions applets
are empty. I tried with recompiling gtk+-{1.2.10-r11, 2.8.19},
dev-libs/{nspr,nss}, enigmail and the mozillas. It didn't help.
Both clien
61 matches
Mail list logo