[gentoo-user] NVIDIA Corporation GF116 [GeForce GTS 450 Rev. 2]

o I need to mask package: xorg-server-1.20.14:0/1.20.14 -- Thelma

[gentoo-user] ERROR: dev-python/dbus-python-1.2.18::gentoo failed (configure phase)

I got stuck on dbus-python, any suggestions? configure: error: Could not link test program to Python. Maybe the main Python library has been installed in some non-standard library path. If so, pass it to configure, via the LIBS environment variable. Example: ./configure

Re: [gentoo-user] updating to udev

On 12/19/21 8:11 PM, Dale wrote: [snip] > I used the old naming method with eudev.  When I switched, the names of > the networks changed.  When I rebooted, no network because they were not > named correctly for the files I had.  It had been so long, I forgot how > to get the names or what to do

Re: [gentoo-user] genkernel's new configs not used?

On 12/31/21 21:43, caveman رَجُلُ الْكَهْفِ 穴居人 wrote: On Friday, December 31st, 2021 at 6:52 PM, Jack wrote: You would still need to run genkernel again for that new version. so, no auto-migration for configs? i thought configs used to migrate automatically. basically i'm trying to

[gentoo-user] Thunderbird setup local mail disappeared

After recent upgrade my "localmail" in Thunderbird disappeared. This is mail from apache, root etc, it goes to "/var/mail/username" In the past Thunderbird had a setting to add local mail, but I can not find it in new version. -- Thelma

[gentoo-user] configure "net-mail/mailutils"

Just installed: net-mail/mailutils typing "mail" (without mail address) should read local /var/mail/[user] but instead it goes in to a "send" mode. I'm trying to find a solution to read and delete local mail in: /var/mail/[user] as Thunderbird discontinued support for reading local mail

Re: [gentoo-user] Thunderbird setup local mail disappeared

w version. I think in the new version, there is a Thunderbird add-on "LocalFolders" But, I created manually new folder: local_mail and simlink mail from /var/mail/thelma to local_mail (in Thunderbird) When I restart Thunderbird, the local mail appears and I can delete it in Thunderbird But

Re: [gentoo-user] Re: configure "net-mail/mailutils" - non-answer / drive by comment

On 12/31/21 16:17, Grant Taylor wrote: On 12/31/21 3:58 PM, the...@sys-concept.com wrote: How do you configure "~/.forward"? echo "u...@example.net" > ~/.forward That will cause most MTAs to forward message for your local user to the u...@example.net email address. Thanks for the hint.

Re: [gentoo-user] ERROR: dev-python/dbus-python-1.2.18::gentoo failed (configure phase)

On 12/19/21 3:10 PM, the...@sys-concept.com wrote: > I got stuck on dbus-python, any suggestions? > > configure: error: > Could not link test program to Python. Maybe the main Python library has > been > installed in some non-standard library path. If so, pass it to configure, > via the

Re: [gentoo-user] viewer for "ps" postscript files

Thelma On 12/23/21 17:19, Mark Knecht wrote: On Thu, Dec 23, 2021 at 4:53 PM wrote: On 12/23/21 15:51, Spackman, Chris wrote: On 2021/12/23 at 01:57pm, the...@sys-concept.com wrote: I have latest ghostscript installed: ghostscript-gpl-9.55.0-r1 When I try to view a postsript file from

Re: [gentoo-user] viewer for "ps" postscript files

On 12/23/21 17:54, eric wrote: On 12/23/21 5:40 PM, the...@sys-concept.com wrote: On 12/23/21 17:19, Mark Knecht wrote: On Thu, Dec 23, 2021 at 4:53 PM wrote: On 12/23/21 15:51, Spackman, Chris wrote: On 2021/12/23 at 01:57pm, the...@sys-concept.com wrote: I have latest ghostscript

Re: [gentoo-user] viewer for "ps" postscript files

On 12/23/21 17:19, Mark Knecht wrote: On Thu, Dec 23, 2021 at 4:53 PM wrote: On 12/23/21 15:51, Spackman, Chris wrote: On 2021/12/23 at 01:57pm, the...@sys-concept.com wrote: I have latest ghostscript installed: ghostscript-gpl-9.55.0-r1 When I try to view a postsript file from command

Re: [gentoo-user] viewer for "ps" postscript files

On 12/23/21 19:36, the...@sys-concept.com wrote: [snip] I deleted the that file: /run/user/1000/dconf/user (owned as root) it was empty anyhow. Logout / Login and system recreated that file with my home user name. But I still can not open "ps" file with evince. I'm getting an error message:

Re: [gentoo-user] viewer for "ps" postscript files

On 12/23/21 15:51, Spackman, Chris wrote: On 2021/12/23 at 01:57pm, the...@sys-concept.com wrote: I have latest ghostscript installed: ghostscript-gpl-9.55.0-r1 When I try to view a postsript file from command line: gs W-9_Form.ps It works OK, but when I try to open same file in Xfce desktop

[gentoo-user] viewer for "ps" postscript files

(Temurin) OpenJDK Runtime Environment 1.8.0_312-b07 OpenJDK 64-Bit Server VM Linux 5.10.61-gentoo (amd64) -- Thelma

[gentoo-user] VirtualBox - open strange window message:

When I start the Gentoo box and login, I get strange VirtualBox windows pop up on start, with message: ---copy You must specify a machine to start, using the command line. Usage: VirtualBoxVM --startvm name|UUID Starts the VirtualBox virtual machine with the

[gentoo-user] external (NFTS) USB 2TB stick error mount.

I format external nvme SSD (M.2) drive as NTFS on Windows (to store some pictures etc.) But when I insert the drive on Linux box (it has support for NTFS enabled) I get an error: sda: sda1 sda2 sd 4:0:0:0: [sda] Attached SCSI disk ntfs: (device sda2): parse_options(): Unrecognized mount

Re: [gentoo-user] external (NFTS) USB 2TB stick error mount.

On 11/1/21 3:50 PM, Michael wrote: > On Monday, 1 November 2021 21:41:24 GMT the...@sys-concept.com wrote: >> I format external nvme SSD (M.2) drive as NTFS on Windows (to store some >> pictures etc.) But when I insert the drive on Linux box (it has support for >> NTFS enabled) I get an error: >>

Re: [gentoo-user] Re: external (NFTS) USB 2TB stick error mount.

On 11/1/21 4:47 PM, Grant Edwards wrote: > On 2021-11-01, the...@sys-concept.com wrote: > >> I format external nvme SSD (M.2) drive as NTFS on Windows (to store >> some pictures etc.) But when I insert the drive on Linux box (it >> has support for NTFS enabled) I get an error: > > Please

[gentoo-user] kernel compile error: arch/x86/entry/thunk_64.o: warning

I'm trying to enable (NFTS) file support in my kernel: 5.4.80 Disabled: - [ ] NTFS write support Enabled: <*> FUSE (Filesystem in Userspace) support When I try to compile the kernel I get an error message: ... AS arch/x86/entry/entry_64.o AS arch/x86/entry/thunk_64.o

Re: [gentoo-user] kernel compile error: arch/x86/entry/thunk_64.o: warning

On 11/2/21 10:52 AM, the...@sys-concept.com wrote: > I'm trying to enable (NFTS) file support in my kernel: 5.4.80 > Disabled: > - [ ] NTFS write support > > Enabled: > <*> FUSE (Filesystem in Userspace) support > > When I try to compile the kernel I get an error message: > ... > AS

Re: [gentoo-user] Re: kernel compile error: arch/x86/entry/thunk_64.o: warning

y/thunk_64.o: warning: objtool: missing symbol table make[2]: *** [scripts/Makefile.build:348: arch/x86/entry/thunk_64.o] Error 1 make[2]: *** Deleting file 'arch/x86/entry/thunk_64.o' make[1]: *** [scripts/Makefile.build:500: arch/x86/entry] Error 2 make: *** [Makefile:1729: arch/x86] Error 2 -- Thelma

Re:[SOLVED] [gentoo-user] Re: kernel compile error: arch/x86/entry/thunk_64.o: warning

On 11/2/21 11:28 AM, the...@sys-concept.com wrote: > On 11/2/21 11:13 AM, Grant Edwards wrote: >> On 2021-11-02, the...@sys-concept.com wrote: >>> On 11/2/21 10:52 AM, the...@sys-concept.com wrote: I'm trying to enable (NFTS) file support in my kernel: 5.4.80 Disabled: - [ ]

[gentoo-user] virtualbox-6.1.24 - not responding

I've upgraded to virtualbox-6.1.24 but it is not responding. I have to reboot the computer for it to work Is 6.1.24 stable?

Re: [gentoo-user] virtualbox-6.1.24 - not responding

On 11/9/21 2:44 AM, Peter Humphrey wrote: > On Monday, 8 November 2021 17:46:03 GMT the...@sys-concept.com wrote: >> I've upgraded to virtualbox-6.1.24 but it is not responding. I have to >> reboot the computer for it to work Is 6.1.24 stable? > > app-emulation/virtualbox-6.1.24-r1 is shown as

Re: [gentoo-user] "app-text/pdfjam" is blocking app-text/texlive-core-2021

On 7/17/21 5:00 PM, Miles Malone wrote: > pdfjam is now included in texlive as of 2021, hence it being a blocker > Thanks for the input. That will be very handy.

[gentoo-user] dev-lang/php-7.4.21-r1::gentoo failed (compile phase)

On of my system is giving me an error when compiling php In file included from /usr/include/libxml2/libxml/parser.h:812, from /var/tmp/portage/dev-lang/php-7.4.21-r1/work/sapis-build/cli/ext/libxml/libxml.c:34: /usr/include/libxml2/libxml/encoding.h:31:10: fatal error:

Re: [SOLVED][gentoo-user] dev-lang/php-7.4.21-r1::gentoo failed (compile phase)

On 7/17/21 3:30 PM, tastytea wrote: > On 2021-07-17 15:13-0600 the...@sys-concept.com wrote: > >> On of my system is giving me an error when compiling php >> >> In file included from /usr/include/libxml2/libxml/parser.h:812, >> from >>

[gentoo-user] "app-text/pdfjam" is blocking app-text/texlive-core-2021

I'm trying to reinstall app-text/pdfjam" but it is blocked by app-text/texlive-core-2021 emerge -1avq app-text/pdfjam [ebuild N] app-text/pdfjam-2.08-r1 [blocks B ] app-text/pdfjam ("app-text/pdfjam" is blocking app-text/texlive-core-2021) * Error: The above package list contains

Re: [gentoo-user] "app-text/pdfjam" is blocking app-text/texlive-core-2021

On 7/17/21 11:40 AM, the...@sys-concept.com wrote: > I'm trying to reinstall app-text/pdfjam" but it is blocked by > app-text/texlive-core-2021 > > > emerge -1avq app-text/pdfjam > [ebuild N] app-text/pdfjam-2.08-r1 > [blocks B ] app-text/pdfjam ("app-text/pdfjam" is blocking >

[gentoo-user] "EZ mode" vs "AP mode"

What kind of routers work with "EZ mode" Recently I was plying with a wifi light switch and couldn't get "EZ mode" to work with my Asus router. AP mode, worked but for this to work phone's Bluetooth and Personal Hotspot need to be turn ON (during configuration); and the switch manual did not

Re: [gentoo-user] Connecting a network printer

On 1/12/22 09:45, Peter Humphrey wrote: Hello list, I have a Lexmark C2425 colour laser, which used to be detected automatically but now isn't. I can connect it over USB, but I'd like to use IPP or HTTP. This is a stable amd64 box, and CUPS is installed thus: net-print/cups-2.3.3_p2-r3::gentoo

Re: [gentoo-user] gentoo-sources-5.10.103 - will not boot

On 3/13/22 14:34, Neil Bothwick wrote: On Sun, 13 Mar 2022 14:04:59 -0600, the...@sys-concept.com wrote: On 3/13/22 13:21, the...@sys-concept.com wrote: Upgraded to: gentoo-sources-5.10.103 and kernel will not boot, not even recovery mode. I'm getting some strange looping/scrolling message

Re: [gentoo-user] gentoo-sources-5.10.103 - will not boot

On 3/13/22 13:21, the...@sys-concept.com wrote: Upgraded to: gentoo-sources-5.10.103 and kernel will not boot, not even recovery mode. I'm getting some strange looping/scrolling message on the screen: Kscan: watching read  1  fsk983s I followed standard procedure: emerge -avq

[gentoo-user] gentoo-sources-5.10.103 - will not boot

OK on other installations) -- Thelma

[gentoo-user] portage - ERROR: setup

Upgrading to new portage I get an error message: package sys-apps/portage-3.0.30-r1 merged on ... with notice ERROR: setup Could not find a Makefile in the kernel source directory. Please ensure that /usr/src/linux points to a complete set of Linux sources WARN: setup Unable to calculate Linux

Re: [gentoo-user] portage - ERROR: setup

On 3/8/22 20:48, Matt Connell wrote: On Tue, 2022-03-08 at 16:12 -0700, the...@sys-concept.com wrote: In /usr/src/linux is pointing correctly:    linux -> linux-5.10.61-gentoo 5.10.61 isn't offered by gentoo-sources anymore. I think you probably depcleaned it at some point since then, so

Re: [gentoo-user] Brother HL-L6200DW

On 4/6/22 19:10, tastytea wrote: On 2022-04-06 19:05-0600 the...@sys-concept.com wrote: On 4/6/22 16:43, P Levine wrote: On Wed, Apr 6, 2022 at 3:40 PM mailto:the...@sys-concept.com>> wrote: Does anybody have this printer? Is there a driver in overlay to setup this printer?

[gentoo-user] Brother HL-L6200DW

Does anybody have this printer? Is there a driver in overlay to setup this printer? Installing those drivers from rpm and cupswrapper is tiring.

[gentoo-user] asterisk-16.16.2-r1

Is it possible to install asterisk-16.16.2-r1 somewhere from the attic? -- Thelma

Re: [gentoo-user] Brother HL-L6200DW

On 4/6/22 16:43, P Levine wrote: On Wed, Apr 6, 2022 at 3:40 PM mailto:the...@sys-concept.com>> wrote: Does anybody have this printer? Is there a driver in overlay to setup this printer? Installing those drivers from rpm and cupswrapper is tiring. I have a different brother

[gentoo-user] kernel panic not syncing

I have a "kernel panic not syncing" when sometimes trying to boot the PC, it small intel "atom" processor Here is the image: https://imgur.com/a/dDXUx3t Many times when I press the power button it keeps flashing three times, but wont boot. -- Thelma

Re: [gentoo-user] Computer case for new build

Thelma On 9/17/23 23:17, Dale wrote: Howdy, This is a work in progress and may take some time, financially if nothing else.  With hindsight, I wish I had done this before the price of everything went up but some things are getting more reasonable. My first task, a case.  At this point, I

[gentoo-user] google-chrome-103.0.5060 - choose password for new keyring

After update to new chrome browser "google-chrome-103.0.5060" A popup shows up: "choose password for new keyring" No explanation what is it, how to change it etc. Is it needed? Was it discuss before? -- Thelma

Re: [gentoo-user] GeForce GT 710 and nvidia-drivers-510.73

On 7/7/22 15:06, Arve Barsnes wrote: On Thu, 7 Jul 2022 at 23:00, mailto:the...@sys-concept.com>> wrote: Does "nvidia-drivers-510.73" works with GeForce GT 710 card? It does not seem so, when searching on nvidia's pages for drivers for that model, the latest available are 465.31.

Re: [gentoo-user] google-chrome-103.0.5060 - choose password for new keyring

On 7/7/22 20:23, Dale wrote: the...@sys-concept.com wrote: After update to new chrome browser "google-chrome-103.0.5060" A popup shows up: "choose password for new keyring" No explanation what is it, how to change it etc.  Is it needed? Was it discuss before? I don't use Chrome but

[gentoo-user] GeForce GT 710 and nvidia-drivers-510.73

Does "nvidia-drivers-510.73" works with GeForce GT 710 card? I just got a warning: WARN: postinst Currently loaded NVIDIA modules do not match the newly installed libraries and may prevent launching GPU-accelerated applications. The easiest way to fix this is usually to reboot. ***WARNING***

Re: [gentoo-user] google-chrome-103.0.5060 - choose password for new keyring

On 7/7/22 21:50, Dale wrote: the...@sys-concept.com wrote: On 7/7/22 21:28, Dale wrote: the...@sys-concept.com wrote: On 7/7/22 20:23, Dale wrote: the...@sys-concept.com wrote: After update to new chrome browser "google-chrome-103.0.5060" A popup shows up: "choose password for new keyring"

Re: [gentoo-user] google-chrome-103.0.5060 - choose password for new keyring

On 7/7/22 21:28, Dale wrote: the...@sys-concept.com wrote: On 7/7/22 20:23, Dale wrote: the...@sys-concept.com wrote: After update to new chrome browser "google-chrome-103.0.5060" A popup shows up: "choose password for new keyring" No explanation what is it, how to change it etc.  Is it

[gentoo-user] x2go very, very slow or not responding

is not responding, doesn't matter how I configure the keyboard session (input/output) Any commendation on the settings configuration of the X2Go or replacement replacement of the X2GO with something that works. -- Thelma

Re: [gentoo-user] x2go very, very slow or not responding

On 7/1/22 23:06, the...@sys-concept.com wrote: In remote location I have two computers 1.) Running older x2goserver-4.0.1.22 and resonance is very good.  Keyboard is working with VirtualBox as well. 2.) The newer computer (much faster) is running x2goserver-4.1.0.3-r1 And the connection is

Re: [gentoo-user] google-chrome-103.0.5060 - choose password for new keyring

On 7/8/22 11:12, Neil Bothwick wrote: On Fri, 8 Jul 2022 10:20:12 -0600, the...@sys-concept.com wrote: gnome-base/gnome-keyring-42.1 pulled in by: virtual/secret-service-0 requires gnome-base/gnome-keyring grep secret-service upgrade_07-07-22.txt [ebuild N] virtual/secret-service-0

Re: [gentoo-user] GPG problem

On 7/10/22 02:56, w...@op.pl wrote: Hello! Some time ago I have made a backup of my secret key and all the subkeys, and then deleted by-hand the master secret key by rm ~/.gnupg/private-keys-v1.d/[keygrip].key The subkeys were moved to a yubikey. Everything was great. Now I wanted to

Re: [gentoo-user] google-chrome-103.0.5060 - choose password for new keyring

Thelma On 7/8/22 08:02, Arve Barsnes wrote: On Fri, 8 Jul 2022 at 15:34, Matt Connell wrote: Should not this instruction say emerge --pretend --depclean rather than --unmerge ? Since its pretended, the result is the same, ultimately. Actually, none of them gives you any info about

[gentoo-user] bundler-2.1.4 failing to emerge

/tmp/portage/dev-ruby/bundler-2.1.4/temp/environment'. Working directory: '/var/tmp/portage/dev-ruby/bundler-2.1.4/work/all/bundler-2.1.4' S: '/var/tmp/portage/dev-ruby/bundler-2.1.4/work/all/bundler-2.1.4' -- Thelma

Re: [gentoo-user] bundler-2.1.4 failing to emerge

Thelma On 7/6/22 11:50, the...@sys-concept.com wrote: I'm updating my system, but it is stopping on dev-ruby/bundler-2.1.4 According rebuild, below it shouldn't be related to new "python" [ebuild   R   ] dev-ruby/bundler-2.1.4  USE="doc -test" RUBY_TARGETS="ruby27

[gentoo-user] glabel - compatible thermal label printer

Is anybody using "glabel"? I'm looking for compatible thermal label printer that will works on Linux; and easy to install printer driver.

Re: [gentoo-user] About to have fiber internet and need VPN info

On 7/16/22 10:41, Dale wrote: Peter Humphrey wrote: On Saturday, 16 July 2022 11:57:25 BST Dale wrote: Basically, I can upload files as fast as I download them. Now I can upload videos or something. ...or run a web server! That's way above anything I'd want to tackle.  Heck, this VPN

[gentoo-user] X2go - connect to XFCE desktop - grey screen

er running same version of x2go: net-misc/x2goclient-4.1.2.2-r1 net-misc/x2goserver-4.1.0.3-r1 -- Thelma

Re: [gentoo-user] X2go - connect to XFCE desktop - grey screen

On 12/16/22 22:52, the...@sys-concept.com wrote: I recently upgraded remote computer and whey trying to connect via X2go with XFCE session produces just grey screen and it is hard to terminate the session. When I select "Connect to local Desktop" (remote computer is running XFCE) the

Re:[SOLVED] [gentoo-user] X2go - connect to XFCE desktop - grey screen

On 12/17/22 15:18, Mark Knecht wrote: On Sat, Dec 17, 2022 at 2:17 PM mailto:the...@sys-concept.com>> wrote: > > On 12/16/22 22:52, the...@sys-concept.com wrote: > > I recently upgraded remote computer and whey trying to connect via X2go with XFCE session

[gentoo-user] net-mail/metamail - removal

I just noticed that "net-mail/metamail" is masked and scheduled for removal 12/23/2022 I'm using "mailto" which is part of metamail. Is there any alternative package that contain this function "mailto" -- Thelma

[gentoo-user] auto mount USB

I have a remote Gentoo PC that stop automating USB drove. The only program I installed on it was "zenity" which should have nothing to do with auto-mount. PC's are running XFCE and Setting Manager: Removable Drive and Media: first option is checked "ON" (mount removable media when

[gentoo-user] has anybody use ChatGPT for programming?

Has anybody use ChatGPT for programming? I think it would very very handy (less bugs) and less questions on the mailing-list I had a bash script to copy file from usb to HD #!/bin/sh if mount | grep -q '/run/media/fd/KIOXIA'; then rsync -av /run/media/fd/KIOXIA/SCILOG/ /home/thelma

Re: [gentoo-user] SII Smart Label Printer SLP-650 with Gentoo

On 3/26/23 16:52, k...@aspodata.se wrote: Thelma: Is anybody using Seiko SII Smart Label Printer SLP-650 with Gentoo No, sorry. I have a hard time make it to work. I have a siislp650.ppd file but when I try to add it via cups under manufacture name Seiko is not showing up. This page

[gentoo-user] SII Smart Label Printer SLP-650 with Gentoo

Is anybody using Seiko SII Smart Label Printer SLP-650 with Gentoo I have a hard time make it to work. I have a siislp650.ppd file but when I try to add it via cups under manufacture name Seiko is not showing up. -- Thelma

[gentoo-user] apcupsd no wall messages

MINUTES 5 TIMEOUT 0 ANNOY 45 ANNOYDELAY 90 NOLOGON disable KILLDELAY 0 NETSERVER on NISIP 127.0.0.1 NISPORT 3551 EVENTSFILE /var/log/apcupsd.events EVENTSFILEMAX 25 UPSCLASS standalone UPSMODE disable STATTIME 0 STATFILE /var/log/apcupsd.status LOGSTATS off DATATIME 0 -- Thelma

Re: [gentoo-user] How to restart/fix frozen XFCE4

-panel - kill -9 pid xfwm4 --replace & Any other solutions? Thelma I've tried the above solution after XFCE froze. It did not work. Pressing CTRL+Alt+T worked, window open with a terminal and responded to keyboard (not the mouse). - pidof xfce4-panel - kill -9 pid xfwm4 --replace & t

Re: [gentoo-user] Failed to emerge x11-libs/libwnck-43.0-r1

On 4/15/23 08:17, Neil Bothwick wrote: On Sat, 15 Apr 2023 07:48:15 -0600, the...@sys-concept.com wrote: Trying to update the system but I fails at Failed to emerge x11-libs/libwnck-43.0-r1 Here is the output: * Applying user patches from /etc/portage/patches ... * Applying

Re: [gentoo-user] Manifest verification failed

On 4/21/23 23:09, the...@sys-concept.com wrote: I'm trying "emerge --sync" (few times) but I get this error: !!! Manifest verification failed: OpenPGP verification failed: gpg: Signature made Sat 22 Apr 2023 04:39:56 AM UTC gpg:    using RSA key

[gentoo-user] Manifest verification failed

ochum.de/gentoo-mirror/ ftp://ftp.spline.inf.fu-berlin.de/mirrors/gentoo/ http://ftp.spline.inf.fu-berlin.de/mirrors/gentoo/; -- Thelma

Re: [gentoo-user] text output from the kernel during boot is not showing

.com>>> wrote: > >     I upgraded to kernel 6.1.19 and nvidia-525.105.17 > >     But during boot text is not showing up/scrolling > >     -- >     Thelma >

Re: [gentoo-user] text output from the kernel during boot is not showing

t;                 [*] EFI-based Framebuffer Support Regards, David On Sat, Apr 22, 2023, 20:56 mailto:the...@sys-concept.com>> wrote: I upgraded to kernel 6.1.19 and nvidia-525.105.17 But during boot text is not showing up/scrolling -- Thelma

[gentoo-user] text output from the kernel during boot is not showing

I upgraded to kernel 6.1.19 and nvidia-525.105.17 But during boot text is not showing up/scrolling -- Thelma

Re: [gentoo-user] text output from the kernel during boot is not showing

pt.com>> <mailto:the...@sys-concept.com <mailto:the...@sys-concept.com> <mailto:the...@sys-concept.com <mailto:the...@sys-concept.com>>>> wrote: >      > >      >     I upgraded to kernel 6.1.19 and nvidia-525.105.17 >      > >      >     But during boot text is not showing up/scrolling >      > >      >     -- >      >     Thelma >      > >

Re: [gentoo-user] text output from the kernel during boot is not showing

On 4/24/23 14:39, Mark Knecht wrote: On Sat, Apr 22, 2023 at 11:56 AM mailto:the...@sys-concept.com>> wrote: > > I upgraded to kernel 6.1.19 and nvidia-525.105.17 > > But during boot text is not showing up/scrolling > > -- > Thelma Is this possibly a grub

Re: [gentoo-user] text output from the kernel during boot is not showing

None of them produce any output: - dmesg| grep -i fatal - dmesg| grep -i error - dmesg| grep -i warn On 4/24/23 16:11, Jude DaShiell wrote: After a boot, dmesg| grep -i fatal && dmesg|grep -i error&| grep -i warn may help. If I were doing that for my own uses, I'd include titles and read

Re: [gentoo-user] text output from the kernel during boot is not showing

On 4/24/23 15:41, Mark Knecht wrote: On Mon, Apr 24, 2023 at 2:31 PM mailto:the...@sys-concept.com>> wrote: > > On 4/24/23 14:39, Mark Knecht wrote: > > > > > > On Sat, Apr 22, 2023 at 11:56 AM mailto:the...@sys-concept.com>

Re: [gentoo-user] text output from the kernel during boot is not showing

Yes, I know. But I'm used to see those lines scrolling by during boot. As sometimes you can see error during booting. On 4/24/23 16:36, Jude DaShiell wrote: Okay, that means you had an error free boot without fatals and without warnings. -- Jude "There are four boxes to be used in defense

Re: [gentoo-user] text output from the kernel during boot is not showing

On 4/25/23 01:27, Neil Bothwick wrote: On Mon, 24 Apr 2023 16:02:33 -0600, the...@sys-concept.com wrote: Consider uncommenting this line and running sudo update-grub Why should I uncommenting this line with an empty parameter? GRUB_CMDLINE_LINUX_DEFAULT="" > # The resolution used on

[gentoo-user] dev-lang/php - making binary

4.) To install the binary package on another Gentoo system, copy the .tbz2 file to the other system's /usr/portage/packages directory and run the following command: emerge --usepkg dev-lang/php Am I missing anything? -- Thelma

Re: [gentoo-user] Finally got a SSD drive to put my OS on

On 4/15/23 17:24, Mark Knecht wrote: On Sat, Apr 15, 2023 at 3:47 PM Dale mailto:rdalek1...@gmail.com>> wrote: > > Howdy, > > I finally broke down and bought a SSD.  It's a Samsung V-Nand 870 EVO > 500GB.  My current OS sits on a 160GB drive so should be plenty.  I plan > to even add a

[gentoo-user] updating /boot directory EFI

/boot/grub/x86_64-efi/core.efi Boot partition is: /dev/nvme0n1p1 = /boot -- Thelma

Re: [gentoo-user] updating /boot directory EFI

On 4/16/23 08:49, Lee K wrote: Also, learn how to boot a kernel from the grub cli, and keep a printed version of these instructions in a handy place. This has saved my butt countless times. :) Thanks Lee, that is really helpful hint.

Re: [gentoo-user] updating /boot directory EFI

On 4/16/23 05:16, Mitch D. wrote: When you emerge grub, Gentoo compiles and "installs" grub (and some grub-related tools) to a directory inside your Gentoo installation, just like other applications. The catch is that grub isn't like other applications... it needs to run outside of Gentoo,

[gentoo-user] Failed to emerge x11-libs/libwnck-43.0-r1

lete build log is located at '/var/tmp/portage/x11-libs/libwnck-43.0-r1/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/x11-libs/libwnck-43.0-r1/temp/environment'. * Working directory: '/var/tmp/portage/x11-libs/libwnck-43.0-r1/work/libwnck-43.0' -- Thelma

Re: [gentoo-user] updating /boot directory EFI

On 4/15/23 22:01, the...@sys-concept.com wrote: After installing new kernel how to update /boot EFI directory? From my notes, I have: grub-mkconfig -o /boot/grub/grub.cfg grub-install --target=x86_64-efi --efi-directory=/boot or should it be: grub-mkconfig -o /boot/grub/grub.cfg efibootmgr -c

Re: [gentoo-user] Failed to emerge x11-libs/libwnck-43.0-r1

On 4/15/23 07:48, the...@sys-concept.com wrote: Trying to update the system but I fails at Failed to emerge x11-libs/libwnck-43.0-r1 Here is the output: cat /var/tmp/portage/x11-libs/libwnck-43.0-r1/temp/build.log  * Package:    x11-libs/libwnck-43.0-r1:3  * Repository: gentoo  *

[gentoo-user] How to restart/fix frozen XFCE4

Any other solutions? Thelma

Re: [gentoo-user] slim gives me blank screen after entering wrong password

On 4/7/23 11:06, Spackman, Chris wrote: On 2023/04/06 at 06:53pm, the...@sys-concept.com wrote: I'm starting X server via "slim" (XFCE4). When I enter a wrong password the slim will not restart, it gives me black screen. Trying to restart "xdm" over ssh does not help, I need to reboot the

[gentoo-user] net-libs/webkit-gtk-2.38.5 and net-libs/webkit-gtk-2.38.5-r500

My system pulled IN two versions of webkit-gtk (slot 4 and 5) net-libs/webkit-gtk-2.38.5 net-libs/webkit-gtk-2.38.5-r500 Running: equery d =net-libs/webkit-gtk-2.38.5-r500 * These packages depend on net-libs/webkit-gtk-2.38.5-r500: app-office/gnucash-4.8 (net-libs/webkit-gtk:4/37)

Re: [gentoo-user] X not starting after kernel upgrade

On 4/10/23 15:53, the...@sys-concept.com wrote: After upgrading to newest kernel the X will not start. Is: make oldconfig  same as: make olddefconfig ? Xorg.0.log showing; [   673.829] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so [   673.829] (II) Module nouveau: vendor="X.Org

[gentoo-user] X not starting after kernel upgrade

ing config section. [ 673.831] (II) UnloadModule: "modesetting" [ 673.831] (EE) Device(s) detected, but none match those in the config file. [ 673.831] (EE) Fatal server error: [ 673.831] (EE) no screens found(EE) This is an old system and is using: GeForce GTS 450 -- Thelma

[gentoo-user] emerge -U or emerge -N

Is it better to us emerge -U or emerge -N I've always done -N but it didn't go very smoothly it seems to me -U might be better option but it takes longer. Right now I'm doing -U and it is compiling 549-packages.

Re: [gentoo-user] emerge -U or emerge -N

On 4/10/23 11:11, hitachi303 wrote: Am 10.04.23 um 18:44 schrieb the...@sys-concept.com: Is it better to us emerge -U or emerge -N I've always done -N but it didn't go very smoothly it seems to me -U might be better option but it takes longer. Right now I'm doing -U and it is compiling

[gentoo-user] config file '/etc/mtab' needs updating

After update I get: * IMPORTANT: config file '/etc/mtab' needs updating. What is this, don't remember seeing it before. cfg-update -u doesn't give me an option to view it.

Re: [gentoo-user] emerge -U or emerge -N

On 4/10/23 18:53, Dale wrote: the...@sys-concept.com wrote: Is it better to us emerge -U or emerge -N I've always done -N but it didn't go very smoothly it seems to me -U might be better option but it takes longer. Right now I'm doing -U and it is compiling 549-packages. . I always do

Re: [gentoo-user] X not starting after kernel upgrade

On 4/10/23 17:29, Jack wrote: On 2023.04.10 18:22, the...@sys-concept.com wrote: On 4/10/23 15:53, the...@sys-concept.com wrote: After upgrading to newest kernel the X will not start. Is: make oldconfig  same as: make olddefconfig ? Xorg.0.log showing; [   673.829] (II) Loading

[gentoo-user] xfce4 automount usb doesn't work

When USB is inserted, the icon appears on a desktop but it is not aouto mounted. In settings: Removable Drive and Media --> - Mount removable drive when hot-plugged (is checked) Does it have something to do with dbus? -- Thelma

Re: [gentoo-user] xfce4 automount usb doesn't work

On 4/11/23 10:15, Matt Connell wrote: On Tue, 2023-04-11 at 09:43 -0600, the...@sys-concept.com wrote: When USB is inserted, the icon appears on a desktop but it is not aouto mounted. In settings: Removable Drive and Media --> - Mount removable drive when hot-plugged (is checked) Does it have

<    4   5   6   7   8   9   10   11   >