On Saturday 16 September 2006 00:53, Richard Fish wrote:
You need to add a sleep case here to do whatever you want to happen
when you press the pwer button...
Thanks Richard,
I have added this:
===
case $group in
button)
case
use a usb mouse - dismantle it and use your big red button to close the
left mouse switch (or better one of the aux ones if they exist). Map
this to shutdown the system.
BillK
On Sat, 2006-09-16 at 11:17 +1000, Andrew Lowe wrote:
Ryan Tandy wrote:
rob wrote:
How do you get power pitten to
On Sat, 2006-09-16 at 11:17 +1000, Andrew Lowe wrote:
Just a slight hijacking of this topic,
I have a little EPIA server acting as firewall, npt, dhcp, dns,etc,etc.
Now even though it doesn't pull a lot of power, I don't want it running
all the time, it has something to do with
Don't mean to hijack this thread, but my situation is probably similar to the
OP.
On Friday 15 September 2006 02:57, Daniel Iliev wrote:
Iain Buchanan wrote:
Finally, if it still doesn't work, post what you see from
tail -f /var/log/messages
or whatever your syslog is, when you press the
On Friday 15 September 2006 12:47, Mick wrote:
Don't mean to hijack this thread, but my situation is probably similar to
the OP.
On Friday 15 September 2006 02:57, Daniel Iliev wrote:
Iain Buchanan wrote:
Finally, if it still doesn't work, post what you see from
tail -f
On Friday 15 September 2006 11:58, Bo Ørsted Andresen wrote:
Perhaps [1] will give you a clue. Otherwise feel free to ask again.
[1]
http://gentoo-wiki.com/HOWTO_Shutdown_headless_server_when_power-button_pre
ssed
Thanks! I hadn't spotted this article. I've tried adding the following two
2006/9/15, Mick [EMAIL PROTECTED]:
On Friday 15 September 2006 11:58, Bo Ørsted Andresen wrote:
Thanks! I hadn't spotted this article. I've tried adding the following two
lines in /etc/acpid/event/default but nothing much happened (as per the log
further down):
event=button[ /]power.*
On Friday 15 September 2006 21:18, Nico Schümann wrote:
Well, my configuration slightly differs from your one.
--- /etc/acpid/events/default
event=.*
action=/etc/acpi/default.sh %e
No it doesn't really. The default entries in mine were as you show above. I
just followed the comments in
On 9/15/06, Mick [EMAIL PROTECTED] wrote:
case $group in
button)
case $action in
power)
/sbin/init 0
;;
You need to add a sleep case here to do whatever you want to happen
when you
Ryan Tandy wrote:
rob wrote:
How do you get power pitten to shutdown and power off Gentoo box
rob
# emerge sys-power/acpid
# rc-update add acpid default
# /etc/init.d/acpid start
and you're done! The default configuration for acpid includes a handler
for the power button event.
HTH.
Press and hold in for 3-5 seconds, that is a hard shutdown if it wont turn off
George
On 14/09/06, rob [EMAIL PROTECTED] wrote:
How do you get power pitten to shutdown and power off Gentoo box
rob
--
gentoo-user@gentoo.org mailing list
--
gentoo-user@gentoo.org mailing list
On Thu, 2006-09-14 at 18:17 -0400, rob wrote:
How do you get power pitten to shutdown and power off Gentoo box
What happens now when you press the power button? What does your syslog
say?
First of all, you need an ATX motherboard. (Any motherboard newer than
about 7/8 or so years ago).
rob wrote:
How do you get power pitten to shutdown and power off Gentoo box
rob
# emerge sys-power/acpid
# rc-update add acpid default
# /etc/init.d/acpid start
and you're done! The default configuration for acpid includes a handler
for the power button event.
HTH.
--
Iain Buchanan wrote:
On Thu, 2006-09-14 at 18:17 -0400, rob wrote:
How do you get power pitten to shutdown and power off Gentoo box
What happens now when you press the power button? What does your syslog
say?
First of all, you need an ATX motherboard. (Any motherboard newer
14 matches
Mail list logo
