Re: [Gimp-user] Resynthezier: can't make it work
Doesn't work either. I think it's because I checked out resynth's git instead of a stabel branch, I probably got some work-in-progress code here that doesn't work. I'll try and compile and older stable release. I think I found the combination that I found before I lost all my notes when my system / hard drives crashed. 1. Select a RECTANGULAR area you want to take the sample from. This is NOT the texture source sample and my notes do not cover textures. 2. edit-copy 3. edit-paste as-new image 4. Switch to the new image. 5. Go to the layers window 6. Remove the alpha layer - The critical piece 7. Go back to the image you are editing. Select a target area you want to fill with the sample from step 1. 8. Now filters-map-resynthesize should allow you to select the newly created source image. This works on SuSE Linux 11.1 with resynthesize v. 0.16-1.2 END PASTE If you are having a compile / crash problem, then the answer lies elsewhere. Good luck, Jim ___ gimp-user-list mailing list gimp-user-list@gnome.org https://mail.gnome.org/mailman/listinfo/gimp-user-list -- -BEGIN GEEK CODE BLOCK- Version: 3.12 GCS d--(+)@ s-:+ a C UL++ P+++ L+++ E-- W++ N o? K- w--(---) !O M+ V- PS+ PE Y++ PGP t++(---)@ 5 X+(++) R+(++) tv--(+)@ b++(+++) DI+++ D- G++ e* h++ r* y? --END GEEK CODE BLOCK-- signature.asc Description: This is a digitally signed message part. ___ gimp-user-list mailing list gimp-user-list@gnome.org https://mail.gnome.org/mailman/listinfo/gimp-user-list
Re: [Gimp-user] Resynthezier: can't make it work
Response is bottom posted: On 11/15/2012 01:24 PM, Dexter Filmore wrote: I can't indeed. Pointers appreciated. Am Thursday 15 November 2012 19:40:15 schrieb Jim: I actually spent an enormous amount of time figuring out steps to get it to work. I haven't been using gimp much the past couple of years and don't remember offhand how to do it, but it isn't intuitive at all. I did post the solution to the gimp add-on download site. Email me if you can't find it and I'll try to help. Regards, Jim On 11/15/2012 12:14 PM, Dexter Filmore wrote: Suse 12.2, gimp 2.8-git branch installed in ~/gimp, compiled resynth-git prefixed there, too. Can call heal selection and Resynthesize, but the do nothing. Example: I have a white square with one corner missing, the corner shows alpha. Now I select all the alpha, then call filter-map-resynth, tell it to look 50pixel further, run it, it calculates for a minute, munches cpu and all, and then... Nothing. The layer is correct, it has an alpha channel, alpha is not locked. Tried both heal and resynth. ? ___ gimp-user-list mailing list gimp-user-list@gnome.org https://mail.gnome.org/mailman/listinfo/gimp-user-list After all the replies, I'm a bit confused about the exact problem you are having. If it is the problem I and others have had that the plugin just plain doesn't work per instructions, you can probably find the answer at: http://registry.gimp.org/node/24243 I wrote a part of that page on how I got it to work with these notes: BEGIN PASTE I think I found the combination that I found before I lost all my notes when my system / hard drives crashed. 1. Select a RECTANGULAR area you want to take the sample from. This is NOT the texture source sample and my notes do not cover textures. 2. edit-copy 3. edit-paste as-new image 4. Switch to the new image. 5. Go to the layers window 6. Remove the alpha layer - The critical piece 7. Go back to the image you are editing. Select a target area you want to fill with the sample from step 1. 8. Now filters-map-resynthesize should allow you to select the newly created source image. This works on SuSE Linux 11.1 with resynthesize v. 0.16-1.2 END PASTE If you are having a compile / crash problem, then the answer lies elsewhere. Good luck, Jim ___ gimp-user-list mailing list gimp-user-list@gnome.org https://mail.gnome.org/mailman/listinfo/gimp-user-list
Re: [Gimp-user] Resynthezier: can't make it work
I actually spent an enormous amount of time figuring out steps to get it to work. I haven't been using gimp much the past couple of years and don't remember offhand how to do it, but it isn't intuitive at all. I did post the solution to the gimp add-on download site. Email me if you can't find it and I'll try to help. Regards, Jim On 11/15/2012 12:14 PM, Dexter Filmore wrote: Suse 12.2, gimp 2.8-git branch installed in ~/gimp, compiled resynth-git prefixed there, too. Can call heal selection and Resynthesize, but the do nothing. Example: I have a white square with one corner missing, the corner shows alpha. Now I select all the alpha, then call filter-map-resynth, tell it to look 50pixel further, run it, it calculates for a minute, munches cpu and all, and then... Nothing. The layer is correct, it has an alpha channel, alpha is not locked. Tried both heal and resynth. ? ___ gimp-user-list mailing list gimp-user-list@gnome.org https://mail.gnome.org/mailman/listinfo/gimp-user-list ___ gimp-user-list mailing list gimp-user-list@gnome.org https://mail.gnome.org/mailman/listinfo/gimp-user-list
Re: [Gimp-user] Resynthezier: can't make it work
I can't indeed. Pointers appreciated. Am Thursday 15 November 2012 19:40:15 schrieb Jim: I actually spent an enormous amount of time figuring out steps to get it to work. I haven't been using gimp much the past couple of years and don't remember offhand how to do it, but it isn't intuitive at all. I did post the solution to the gimp add-on download site. Email me if you can't find it and I'll try to help. Regards, Jim On 11/15/2012 12:14 PM, Dexter Filmore wrote: Suse 12.2, gimp 2.8-git branch installed in ~/gimp, compiled resynth-git prefixed there, too. Can call heal selection and Resynthesize, but the do nothing. Example: I have a white square with one corner missing, the corner shows alpha. Now I select all the alpha, then call filter-map-resynth, tell it to look 50pixel further, run it, it calculates for a minute, munches cpu and all, and then... Nothing. The layer is correct, it has an alpha channel, alpha is not locked. Tried both heal and resynth. ? ___ gimp-user-list mailing list gimp-user-list@gnome.org https://mail.gnome.org/mailman/listinfo/gimp-user-list -- -BEGIN GEEK CODE BLOCK- Version: 3.12 GCS d--(+)@ s-:+ a C UL++ P+++ L+++ E-- W++ N o? K- w--(---) !O M+ V- PS+ PE Y++ PGP t++(---)@ 5 X+(++) R+(++) tv--(+)@ b++(+++) DI+++ D- G++ e* h++ r* y? --END GEEK CODE BLOCK-- signature.asc Description: This is a digitally signed message part. ___ gimp-user-list mailing list gimp-user-list@gnome.org https://mail.gnome.org/mailman/listinfo/gimp-user-list
Re: [Gimp-user] Resynthezier: can't make it work
On Thu, 2012-11-15 at 19:14 +0100, Dexter Filmore wrote: Suse 12.2, gimp 2.8-git branch installed in ~/gimp, compiled resynth-git prefixed there, too. Can call heal selection and Resynthesize, but the do nothing. If you run ~/.gimp-2.8-git/plug-ins/resynth it should give you a message about being a gimp plugin. If not, maybe you need LD_LIBRARY_PATH, depending on how you compiled gimp 2.8. Both resynth and gimp need to use exactly the same libgimp, so you could also hck that using ldd on both programs (gimp-2.8 and resynth). Also, start gimp from a terminal (console) and watch for error messages. Liam -- Liam Quin - XML Activity Lead, W3C, http://www.w3.org/People/Quin/ Pictures from old books: http://fromoldbooks.org/ Ankh: irc.sorcery.net irc.gnome.org freenode/#xml ___ gimp-user-list mailing list gimp-user-list@gnome.org https://mail.gnome.org/mailman/listinfo/gimp-user-list
Re: [Gimp-user] Resynthezier: can't make it work
On Thu, Nov 15, 2012 at 10:14 PM, Dexter Filmore wrote: Suse 12.2, gimp 2.8-git branch installed in ~/gimp, compiled resynth-git prefixed there, too. Can call heal selection and Resynthesize, but the do nothing. Ubuntu 12.04, GIMP 2.8, Resynthesizer from Git. Everything works as expected. Alexandre Prokoudine http://libregraphicsworld.org ___ gimp-user-list mailing list gimp-user-list@gnome.org https://mail.gnome.org/mailman/listinfo/gimp-user-list
Re: [Gimp-user] Resynthezier: can't make it work
Am Thursday 15 November 2012 20:25:09 schrieb Liam R E Quin: On Thu, 2012-11-15 at 19:14 +0100, Dexter Filmore wrote: Suse 12.2, gimp 2.8-git branch installed in ~/gimp, compiled resynth-git prefixed there, too. Can call heal selection and Resynthesize, but the do nothing. If you run ~/.gimp-2.8-git/plug-ins/resynth it should give you a message about being a gimp plugin. If not, maybe you need LD_LIBRARY_PATH, depending on how you compiled gimp 2.8. Both resynth and gimp need to use exactly the same libgimp, so you could also hck that using ldd on both programs (gimp-2.8 and resynth). Also, start gimp from a terminal (console) and watch for error messages. Liam dexter@shodan:~/gimp-2.8-git/lib64/gimp/2.0/plug-ins$ ./resynthesizer ./resynthesizer is a GIMP plug-in and must be run by GIMP to be used Different path. Issue? -- -BEGIN GEEK CODE BLOCK- Version: 3.12 GCS d--(+)@ s-:+ a C UL++ P+++ L+++ E-- W++ N o? K- w--(---) !O M+ V- PS+ PE Y++ PGP t++(---)@ 5 X+(++) R+(++) tv--(+)@ b++(+++) DI+++ D- G++ e* h++ r* y? --END GEEK CODE BLOCK-- signature.asc Description: This is a digitally signed message part. ___ gimp-user-list mailing list gimp-user-list@gnome.org https://mail.gnome.org/mailman/listinfo/gimp-user-list
Re: [Gimp-user] Resynthezier: can't make it work
On Fri, Nov 16, 2012 at 12:31 AM, Dexter Filmore wrote: Also, start gimp from a terminal (console) and watch for error messages. ^^^ Please :) Alexandre Prokoudine http://libregraphicsworld.org ___ gimp-user-list mailing list gimp-user-list@gnome.org https://mail.gnome.org/mailman/listinfo/gimp-user-list
Re: [Gimp-user] Resynthezier: can't make it work
Am Thursday 15 November 2012 21:36:41 schrieb Alexandre Prokoudine: On Fri, Nov 16, 2012 at 12:31 AM, Dexter Filmore wrote: Also, start gimp from a terminal (console) and watch for error messages. ^^^ Please :) Alexandre Prokoudine http://libregraphicsworld.org ___ gimp-user-list mailing list gimp-user-list@gnome.org https://mail.gnome.org/mailman/listinfo/gimp-user-list $ gimp Gimp adaption ** (plugin-heal-selection.py:10825): WARNING **: Trying to register gtype 'GMountMountFlags' as enum when in fact it is of type 'GFlags' ** (plugin-heal-selection.py:10825): WARNING **: Trying to register gtype 'GDriveStartFlags' as enum when in fact it is of type 'GFlags' ** (plugin-heal-selection.py:10825): WARNING **: Trying to register gtype 'GSocketMsgFlags' as enum when in fact it is of type 'GFlags' ^ heal selection Gimp adaption Gimp adaption Gimp adaption ^ resynth -- -BEGIN GEEK CODE BLOCK- Version: 3.12 GCS d--(+)@ s-:+ a C UL++ P+++ L+++ E-- W++ N o? K- w--(---) !O M+ V- PS+ PE Y++ PGP t++(---)@ 5 X+(++) R+(++) tv--(+)@ b++(+++) DI+++ D- G++ e* h++ r* y? --END GEEK CODE BLOCK-- signature.asc Description: This is a digitally signed message part. ___ gimp-user-list mailing list gimp-user-list@gnome.org https://mail.gnome.org/mailman/listinfo/gimp-user-list