HPLIP List Members,
Thanks for taking the time to read this email.
As you may or may not know Sourceforge is in the process of voting for
the 2007 Community Choice Awards.
If you have a few minutes and feel so inclined please vote for us.
Go here:
http://sourceforge.net/projects/hplip/
What size of envelope are you using?
Aaron
Jeffrey Ratcliffe wrote:
From OOO and Windows, envelopes are printed correctly in my OfficeJet 5510.
From Ubuntu Edgy HPLIP v1.6.10 (and Dapper HPLIP v0.9.7 before) they
are printed 180 degrees wrong (compared to the envelope symbol in the
feed
/source/hplip
and setting the variable SNMP to yes.
Thanks for your help.
Aaron J Albright a écrit :
Looking at:
Nov 22 01:16:45 hpiod: no JetDirect support enabled
It looks like HPLIP was compiled without Jetdirect support..
May need to uninstall hplip, remove /usr/share/hplip and reinstall
Looking at:
Nov 22 01:16:45 hpiod: no JetDirect support enabled
It looks like HPLIP was compiled without Jetdirect support..
May need to uninstall hplip, remove /usr/share/hplip and reinstall.
Aaron
mathieu bouillaguet wrote:
Hi,
I have a HP Officejet 7310 printer with hplip 1.6.9. As I
to figure
that one out for myself !
Regards James
-- Forwarded message --
From: James Kelly [EMAIL PROTECTED]
Date: 17-Nov-2006 12:08
Subject: Re: [Hplip-help] Is faxing via a Jetdirect attached LJ3330
MFP supported ?
To: Aaron J Albright [EMAIL PROTECTED]
Cc: hplip-help
Fax over network should work correctly. I've verified that it's still
functioning with a LJ3380.
Can you run hp-check and post the output? If you used hp-setup to
configure the printer the fax queue should already be there. What
happens if you run hp-sendfax?
Aaron
James Kelly wrote:
Have you tried deleting the printer queue and reinstalling it using
hp-setup?
A
mathieu bouillaguet wrote:
Hi,
My HP officeJet 7310 doesn't work anymore. It was configured and worked
perfectly for a moment. The device URI is
hp:/net/Officejet_7300_series?ip=192.168.0.5 and I'm using hplip
'
error: Device not found
Hope that helps
Mathieu Bouillaguet
Aaron J Albright a écrit :
Have you tried deleting the printer queue and reinstalling it using
hp-setup?
A
mathieu bouillaguet wrote:
Hi,
My HP officeJet 7310 doesn't work anymore. It was configured and worked
perfectly for a moment
not to do so. I really don't know what
happenned.
Mathieu Bouillaguet.
Aaron J Albright a écrit :
Okay. Well everything seems okay (except LSB) what distro are you using?
SNMP is working (tested that with snmpwalk). You can ping the printer.
You restarted everything. It 'should' be working. Did you
and I prefer not to do so. I really don't know what
happenned.
Mathieu Bouillaguet.
Aaron J Albright a écrit :
Okay. Well everything seems okay (except LSB) what distro are you
using?
SNMP is working (tested that with snmpwalk). You can ping the printer.
You restarted everything. It 'should
Can you run:
hp-testpage -g
and post the output?
As for color cal, try doing;
hp-colorcal -g
and posting that output as well.
Aaron
Sandy Bryant wrote:
I am running the HP Device Manager under SuSE 10.1, with an HP Photosmart 7550
printer. If I try to run the color calibration tool, it
What version of HPLIP are you using? Can you run hp-check and post the
output? Can you try restarting hplip, /etc/init.d/hplip restart. Also
try restarting the printer as well.
Aaron
mathieu bouillaguet wrote:
Hi,
My HP officeJet 7310 doesn't work anymore. It was configured and worked
Russ,
I'm sorry to report that we do not currently support the Mac platform.
Some users have had luck in getting it to work however.
Although I am unable to assist you with this. You may want to search the
archives, there is some possible information on how to do it in the list.
Good luck
, 2006-11-06 at 09:24 -0800, Aaron J Albright wrote:
I've just done a clean install, i.e. I formated everything except /home,
and I still have the same problem.
The clean install sorted out the dependency problems I had trying to
install 1.6.10 from source. This time, everything went smoothly
You are using the hplip rpms and not the hplip released version correct?
Thanks!
A
Kent Hill wrote:
In a fresh installation if Fedora Core 6 with the latest RPMs upgades.
The HP-setup program finds a Photosmart 5100 series pbb file which
unfortunately contains a Laserjet 5100 driver (which
Is it possible to upgrade to hplip 1.6.10?
A
Nicholas Asch wrote:
I'm having the same problem.
Aaron J Albright aaron.albright at hp.com writes:
Can you run;
tail -f /var/log/messages
then try and print as you where and repost the log?
/var/log/cups/error_log shows nothing wrong.
dmesg
What version of HPLIP are you using? and what distro? Can you run
hp-check and post the output?
Thanks.
A
Michal Standa wrote:
Hello,
I got problem with HPLIP and HP LJ 1100A.
I cannot use hp-toolbox because all the time I try to run it It crashes.
I'm adding few outputs (see below).
Is your printer connected directly to the computer? or are you going
through a usb hub?
Not sure if that's the problem..trying to come up with some areas to check.
Aaron
Robert Smits wrote:
On Wednesday 25 October 2006 01:52, Johannes Meixner wrote:
An update from Bob Smits regarding the
Did you use hp-setup to configure the printer? If not delete the
current printer queues and run hp-setup.
If you are using hplip 1.6.10 please upgrade from our website.
http:/hplip.sourceforge.net.
Aaron
Bruce Hill, Jr. wrote:
I installed a printer in CUPS with a usb:, socket:, etc.
Currently make copies is not supported on the Photosmart C4100 series.
This may be supported in the future.
Sorry for the inconvenience.
Aaron
Lawson Brown wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I hope I have addressed this question correctly.
I have recently bought an HP
Thanks for your support of HPLIP.
Aaron
Nathan Owens wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Thought i'd tell you on the HP deskjet F335 all-in-one it does have
copying capability, it doesn't have to be hooked up to a pc for it to
copy, i know it works with u pressing the copy
Sorry sent my last reply from the wrong mailbox.
Anyway. You should be able to remove the previous version of hplip,
su
apt-get remove hplip
then run
rm -rf /usr/share/hplip
re-run the installer for hplip 1.6.10. or compile it manually.
instructions on our website.
This should make sure
I'm not sure why satisfying the deps is being a problem. I've install
and tested on edgy a number of times with no issues. I'm thinking there
may be a system problem. Did you do a clean install of edgy or
dist-upgrade?
A
Jeffrey Ratcliffe wrote:
On Wed, 2006-11-01 at 07:08 -0800, dwelch91
*
On 11/1/06, *Aaron J Albright * [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED] wrote:
We've been able to reproduce this on another laser printer. We'll be
looking at this sometime this week.
Sorry for the delay.
Aaron
Gaurav
Is the printer going through a hub of any sort? Is it detected on
another computer? Does it print if using the usb backend?
A
Michael Oberhuber wrote:
Here are the outputs. Thanks in advance...
hp-check:
HP Linux Imaging and Printing System (ver. 1.6.9)
Dependency/Version Check Utility
I've been able to get access to a CLJ2550. I printed the pdf document
that you sent me, times below:
1 1:10
2 1:50
3 2:06
4 2:20
5 2:35
6 2:50
7 3:05
8 3:20
Everything worked well. I'm thinking if possible try removing hplip,
delete the /usr/share/hplip directory, delete all the printer
Please go to http://hplip.sourceforge.net and upgrade to the latest
HPLIP and follow the directions for how to configure your printer.
The toolbox will only work with printers using the hp:/ backend. The usb
backend will not work. There are detailed instructions for debian as
well as an
Also try upgrading to the latest hplip. There was a scanimage fix that
may resolve this as well.
A
Jeffrey Ratcliffe wrote:
I've just upgraded from Ubuntu Dapper (which had hplip v0.9.7) to Edgy
(v1.6.9). With Dapper, the scanner (and ADF) part of my OfficeJet 5510
worked perfectly.
Now, if
: Mon, 30 Oct 2006 14:32:45 -0800
From: Aaron J Albright [EMAIL PROTECTED]
Subject: Re: [Hplip-help] Scanning in lineart mode over the network
To: Gaurav Goyal [EMAIL PROTECTED]
Cc: hplip-help@lists.sourceforge.net
Message-ID: [EMAIL PROTECTED]
Content-Type: text/plain; charset=iso-8859-1
I've tested
Can you run hp-check and post the output?
also run:
/usr/lib/cups/backend/hp
and post that output as well.
Thanks!
Aaron
Michael Oberhuber wrote:
Hi there,
I have an HP OfficeJet 5515, run with HPLIP 1.6.9 (an some earlier versions)
on Suse 10.1
Printing under CUPS works fine, but all hp
scanner
scanimage: sane_start: Error during device I/O
As described before, the first page was read from the ADF with no
problem. The second page was not, although scanimage thought it was, and
I cancelled the scan on the third page with ctrl-c.
On Tue, 2006-10-31 at 08:17 -0800, Aaron J Albright
can you run hp-check and post the output?
Make sure that your printer us using the hp:/ backend and not the usb
backend.
Aaron
[EMAIL PROTECTED] wrote:
I have HPLIP successfully installed on my Slackware 11 system, it
immediately found and recognised my HP 7310 Officejet and that appears
in
What's the command line that you are using specifically?
Thanks!
Aaron
Gaurav Goyal wrote:
As has probably been reported previously, trying to scan in lineart mode
over the network fails with a Device I/O error. We are currently using
openSuse 10.1. The message in var/log/meessages is
What printer are you using?
Please run hp-check and post the output.
Thanks.
A
Gaurav Goyal wrote:
As has probably been reported previously, trying to scan in lineart mode
over the network fails with a Device I/O error. We are currently using
openSuse 10.1. The message in
Have you looked over this document?
http://hplip.sourceforge.net/howtos/printing.html
Thanks!
Aaron
[EMAIL PROTECTED] wrote:
Under Windows the 8250 is able to print 4 sided full bleed without problems.
Under Linux, with HPLIP 1.6.10, I am unable to print 4 sided A4 full bleed.
The latest
I've tested an OfficeJet 5510 on Edgy and the ADF was able to scan
multiple pages.
can you run hp-check and post the output?
as well try running (load up the adf first)
scanimage -v -b --batch-scan=yes -d hpiod:/
and after the -d put in the hpiod:/ address for your printer in the
hpiod:/
me your snail-mail (work) address?
Thanks,
Josh
Aaron J Albright wrote:
Hey Josh,
We've gone over the examples you sent us, and we still haven't been able
to reproduce this. We are thinking there may be a toner/hardware issue
perhaps.
Sorry I couldn't help more.
Aaron
josh wrote:
Hi Aaron
I tested your document on a CLJ2500 and the pdf prints out in no time at
all. Can you run hp-check and post the output?
Thanks!
Aaron
Phil Schleper wrote:
Hi all,
I just migrated my CLJ2550 from the usb backend using to the HP backend
using HPLIP 1.6.10, and suddenly postscript photo
before an upgrade to mandriva
2006, and HPLIP doesn't.
Is there still a way to put HPOJ together? I'd like to get my scanner
back. ;)
On Mon, 23 Oct 2006, Aaron J Albright wrote:
You are using HPOJ and it works or are you using hplip?
A
Mandi wrote:
This printer kicked total printer
://hplip.sourceforge.net/install/index.html
On Tue, 24 Oct 2006, Aaron J Albright wrote:
Did you go through the instructions here:
http://hplip.sourceforge.net/install/step2/mandriva06.html
or did you use the installer?
Can you run hp-check and post the output?
Thanks!
A
Mandi wrote:
That's
and then into the host)
hp-setup tells me (when i'm at the console) that it doesn't see any
devices.
On Tue, 24 Oct 2006, Aaron J Albright wrote:
Looks like you are missing xsane for scanning. Otherwise you should
be able to run hp-setup to configure the printer.
What happens?
A
Mandi wrote
Unknown hp no_device_found
Thanks,
--mandi
On Mon, 23 Oct 2006, Aaron J Albright wrote:
Are you connecting the printer via usb, parallel or network?
Can you run:
/usr/lib/cups/backend/hp
and post the output?
Thanks.
A
Mandi wrote:
Aaron --
Thanks for the suggestion.
I deleted all
Can you run hp-check and post the output? Did you install from our
source or using a freespire repository? What version of hplip are you
trying to use?
Thanks.
Aaron
Familia Frazelle wrote:
Have downloaded installed this program, as well as the HPData and
another one that starts with HP.
What distro are you using?
Can you run hp-check and post the output?
Thanks!
A
Patric wrote:
Hi guys, hope you can help :-)
Trying to scan using HPLIP and I keep getting the following error :
[EMAIL PROTECTED] ~]# scanimage -d hpaio:/net/HP_LaserJet_3390?
ip=192.168.1.58 -T
scanimage:
Can you run hp-check and post the output?
What distro are you using?
Aaron
Paul Mercure wrote:
Greetings,
I'm sure you've dealt with this zillion of time but I can't find a final succes
story.
Linux Kernel 2.6.18
hplip-1.6.10 .. from HPLIB.soourceforge
libusb-0.1.12 .. from
For the HP tools to work the printer needs to use the hp:/ backend.
Would it be possible to remove hplip and install using the source from
hplip.sf.net?
If not try deleting the printer queues and run hp-setup to configure the
printer. I could never get printerdrake to do it correctly, and
Can you run
snmpwalk -Os -c public -v 1 IP.ADDRESS.HERE 1.3.6.1.4.1.11.2.3.9.1.1.7.0
should have a result something like:
enterprises.11.2.3.9.1.1.7.0 = STRING:
MFG:Hewlett-Packard;CMD:PJL,MLC,BIDI-ECP,PCL,POSTSCRIPT,PCLXL;MDL:hp
LaserJet 3380;CLS:PRINTER;DES:Hewlett-Packard LaserJet
Can you post the entire hp-check? There are some new checks that could
be useful to see.
Thanks!
Aaron
Arno Jung wrote:
SuSE 10.1, hplip-1.6.10-0.1.i586.rpm, hplip-hpijs-1.6.10-0.1.i586.rpm
I can not send fax with
hpfax:/usb/OfficeJet_5110?serial=CN2BKB20SR2Q
Please look at the following:
Are you using a windows or linux machine?
Aaron
BruceJoan wrote:
We have a HP Photosmart 330series printer but are having trouble getting
the date on our photos, can you help please.
Joan Fergusson.
[EMAIL PROTECTED] mailto:[EMAIL PROTECTED]
I'll have to check the margin settings. However for print features
you'll want to change these using the cups interface. http://localhost:631
Aaron
M R K wrote:
I am running Ubuntu 6.06LTS (Dapper) and have a HP PSC 1350 All-in-one. I just
downloaded the latest (1.6.10) driver. I first
Can you run python ./install.py -g
and post that?
Thanks!
A
Michael Eichstadt wrote:
Hi Aaron,
i did it and look what happens:
Am Dienstag, 17. Oktober 2006 18:14 schrieb Aaron Albright:
Try:
cd /home/kommission/Eigene_Downloads/hplip-1.6.10
and run
python ./install.py
What happens?
What distro are you using? What version of HPLIP?
I haven't seen that this was needed before.
A
Ernst Kloppenburg wrote:
Hello,
I had the same problem with hpiod: Rejected connection and found the
reason to be the following: in /etc/hosts there was a line like
127.0.0.1 localhost myhostname
Can you try running:
sudo dpkg --configure -a
and then re-doing the apt-get install, etc?
A
Nico Coetzee wrote:
Hi
I am trying to get hplip installed
I did the following
sudo apt-get install build-essential python2.4-dev python2.4-qt3
libcupsys2-dev libsnmp9-dev libjpeg62-dev lsb
Scott,
Please review the documentation at our website;
http://hplip.sourceforge.net
Look under download and install instructions. Fedora is well
documented. You shouldn't have any problems.
A
Scott Berry wrote:
Hello there,
I am trying to set up hplip on a Fedora box for my father
Can you run:
tail -f /var/log/messages
and then in another terminal window:
/etc/init.d/hplip restart
and then post any errors in the /var/log/messages.
also if you are using Fedora Core ensure that SELinux is off and then
restart HPLIP.
Aaron
Scott Berry wrote:
Hi there,
I am having
Please use the DeskJet F310 ppd for now. We'll add the F300 with the
next release. However there will be not reduction on functionality to
use the F310 ppd with the F300.
Thanks.
Aaron
amr abdellaoui wrote:
Dears
I have bought a new HPDeskjet F300 and since I m
rather a linux user ( i
Ivan,
Thanks for letting us know! This will be corrected shortly.
Aaron
Ivan Dobric wrote:
Hi:
I noticed that your website for HPLIP - http://hplip.sourceforge.net
misbehaves when you click on Supported devices and then on Download.
The web server reports a missing page because it tries to
,
Tim
- Original Message
From: Aaron J Albright [EMAIL PROTECTED]
To: Timothy Cartwright [EMAIL PROTECTED]
Cc: hplip-help@lists.sourceforge.net
Sent: Tuesday, October 3, 2006 2:41:52 PM
Subject: Re: [Hplip-help] HPOJ and HPLIP
If you have HPOJ on your system it will conflict and break
What distro are you using?
I have seen this before, I believe it's the printer queue generated by
Fedora Core. I'll need to look into this more.
Thanks!
A
Milind Ganjoo wrote:
I successfully installed the HPLIP driver for my HP Deskjet 3325
printer. When I log into CUPS, however, I see two
refer to the
installation instructions at:
http://hplip.sourceforge.net/install/index.html
arju:~ #
Aaron J Albright schrieb:
Hey Arno,
Can you run hp-sendfax -gg and try to fax and post the output? As well
run hp-check and post that.
Thanks!
A
Arno Jung wrote:
HPLIP 1.6.9
Peter,
Honestly I'm not sure. We only test with the JetDirect. However the
snmpwalk needs to see the HP printer..it will have a result something
like this:
snmpwalk -Os -c public -v 1 ip_address 1.3.6.1.4.1.11.2.3.9.1.1.7.0
result:
enterprises.11.2.3.9.1.1.7.0 = STRING:
cupsext.getPrinters()
NameError: global name 'cupsext' is not defined
- Original Message
From: Aaron J Albright [EMAIL PROTECTED]
To: Timothy Cartwright [EMAIL PROTECTED]
Cc: hplip-help@lists.sourceforge.net
Sent: Wednesday, October 4, 2006 9:32:14 AM
Subject: Re: [Hplip-help] HPOJ
'cupsext' is not defined
- Original Message
From: Aaron J Albright [EMAIL PROTECTED]
To: Timothy Cartwright [EMAIL PROTECTED]
Cc: hplip-help@lists.sourceforge.net
Sent: Wednesday, October 4, 2006 9:32:14 AM
Subject: Re: [Hplip-help] HPOJ and HPLIP
Yes this sounds consistent.
A
Timothy
Have you looked over this document?
http://hplip.sourceforge.net/troubleshooting/scanning.html
A
Eugenio Odorifero wrote:
Xsane don't see HP officejet 6315 scanner. Printer instead is fully
working.
What can i do?
Eugenio
---
What version of HPLIP are you using? Does printing work okay? Have you
looked at this document?
http://hplip.sourceforge.net/troubleshooting/scanning.html
Ivo Schaap wrote:
Oke, this is what happens
i try to scan and it seems to time out
this is the log file
Sep 28 17:08:55
What distro are you using?
Aaron
Timothy Cartwright wrote:
I'm tying to setup the HP Device Manager, but am having a little
trouble. The installation of HPLIB went fine, but when I type hp-check
at the command line I get this:
HPOJ running?
error: Yes, HPOJ is running. HPLIP is not
Would it be possible to delete all the queues and run hp-setup to
install/configure the printer?
Thanks!
A
Julien Valroff wrote:
Hi,
I am currently trying to send fax through my PSC 2610. Printing/scanning
work fine using hplip 1.6.7 and CUPS 1.2.4 on Debian unstable.
I created a new queue
If possible can you upgrade to the latest hplip?
Aaron
Eugenio Odorifero wrote:
hp 6315 all-in-one, as printer, works good with 6300 driver. As scanner,
doesn't work because Xsane don't see it.
What can I do for a manual Xsane setting?
My OS is Ubuntu Dapper
hplip version is 0.9.7
We have only testing HPLIP with HP JetDirect boxes. Other vendors' boxes
may work flawlessly or may have various problems. I think you should be
able to get any box to print, but other items like scanning, faxing,
status, ink levels, etc. may not be supported.
Aaron
giuseppe sportelli wrote:
Can you please run hp-check and post the output?
Thanks!
A
[EMAIL PROTECTED] wrote:
Problem with HPLIP
Using the latest available sources. AMD64X2 on Gentoo 2006.1
Samba starts Cups starts HPLIP starts
./makeuri fails - no devices found (immediately returns)
./probe -b net -
Run;
tail -f /var/log/messages
then run /etc/init.d/hplip restart (in a separate shell)
Send any errors reported in /var/log/messages
A
Gerrit Visscher wrote:
An'n Freedag 08 September 2006, 00:20 hett Aaron J Albright schreven:
Gerrit Visscher wrote:
An'n Dunnersdag 07 September 2006, 01
Are you using the current version of HPLIP or are you using the HPLIP
that comes with suse 10.1? there are several experimental suse packages
you may consider. Can you run hp-check and post the output?
ftp://ftp.suse.com/pub/people/jsmeix/unsupported/hplip/10.1/
these are to be used for
Good morning,
We haven't done any testing with either device you listed, however you
may want to consider using an HP JetDirect device. We do test with
those and haven't had any problems with them.
Hope this helps..
Aaron
Christoph Mueller wrote:
Hi,
I'm about to buy a HP Photosmart
George,
You need to change the file permissions so that the file is executable..
Run: chmod u+x hplip-1.6.10.0.run
Then
./hplip-1.6.10.0.run
The install instructions have been updated, however not uploaded as of yet.
A
George Bauer wrote:
Good day, I am having a problem with hplip-1.6.9
:
Aaron,
I am having some trouble installing hplip-1.6.9. I am still
on 1.6.6a (which is what came with the distro). Could that be the
problem?
Also does it work for you with xsane?
Best,
Alex
--- Aaron J Albright [EMAIL PROTECTED] wrote:
Alex can you try using the scanimage tar ball from
http
-devel said
that my patch violates the sane API.
Best,
Alex
--- Aaron J Albright [EMAIL PROTECTED] wrote:
Are you using the sane frontend or what version of xsane?
A
Alex Eskin wrote:
Aaron,
I managed to install hplip-1.6.9. Same problem with the scanner,
but the fax now works :)
I tried
You probably are looking for the windows driver.
Try http://www.hp.com
Thanks.
A
[EMAIL PROTECTED] wrote:
LOST CD INSTALATION HP 1210
I WOULD LIKE TO REINSTALL ON AN OTHER COMPUTER
WHERE CAN I FIND SOFT DRIVER INSTALLATION
THANK YOU
Victor, just for future reference the lineart issue is issue 1160. The
engineer hasn't had a chance to resolve this as of yet, but it is in our
defect tracking system and being reviewed. I'm sorry to report that I
don't have any sort of resolution ETA for you.
Sorry for the delay.
Aaron
of scanimage (up to 1.0.17)
work since they call sane_cancel after every page. Newer versions of
scanimage and xsane do not work, but a patched xsane does.
Best,
Alex
--- Aaron J Albright [EMAIL PROTECTED] wrote:
Alex what printer are you using? I'll work on reproducing this.
Thanks!
A
Alex
What distro are you using? What version of HPLIP?
http://hplip.sourceforge.net
for the HPLIP driver.
Aaron
CNRSimha wrote:
Hi
We have a deskjet 3920 printer. The document says it supports direct
text printing with the `us-ascii' charset. However when we try to print
using cp command it is
)
work since they call sane_cancel after every page. Newer versions of
scanimage and xsane do not work, but a patched xsane does.
Best,
Alex
--- Aaron J Albright [EMAIL PROTECTED] wrote:
Alex what printer are you using? I'll work on reproducing this.
Thanks!
A
Alex Eskin wrote:
Ralf,
I
and
the fooomatic/hpijs hplip 1.6.7 ppd. As soon as I've had a friend scan
them in, I'll send them to you. What resolution do you want/need and
how
large of an attachment can I send without being rejected by your mail
server?
cheers,
-j
Aaron J Albright wrote:
Josh
Ralf,
Can you do this process over and run tail -f /var/log/messages and post
any errors?
Thanks!
A
Ralf Jardon wrote:
If i try to make a batch scan using ADF (sane-1.0.14, xsane-0.99.1,
hplip 1.6.7, HP Officejet 7120, Ubuntu dapper) i have some problems.
The scan starts normally but after
John,
We haven't had a chance to look at Fedora Core 6 as of yet. I'll be
looking over it closer to it's release and should have additional
information. It appears FC6 will be released in a month or so, as such
we'll be doing FC6 testing in the next few weeks.
Thanks for your support.
Yevgeny,
I'm sorry you are having this experience with HPLIP.
You will want to review the install docs at:
http://hplip.sourceforge.net/install/step2/fc4.html
You are most likely having troubles because SELinux is enabled. Please
disable SELinux, run /etc/init.d/hplip restart delete your
Michele,
I'm sorry but the HPLIP software is only for Linux systems. We do not
support Mac. You may want to consider checking HP's website for
possible Mac assistance.
http://www.hp.com
Aaron
moi wrote:
Hello...I was referred to your website with assistance with regards to
downloading
--
Still the printer doesn't start to print anything
Aaron J Albright wrote:
Markus,
Sorry, correct file attached.
A
Markus Huschka wrote:
Hi Aaron,
did you attach the correct file? It has a different name
(hplip-0.9.11-1.patch vs
Can you run:
snmpwalk -Os -c public -v 1 IP.ADDRESS.HERE 1.3.6.1.4.1.11.2.3.9.1.1.7.0
(where IP address--put the printer IP address)
Aaron
zorg . wrote:
First of all sorry for my English.
I tried to install my hp 2100 tn on ubuntu dapper drake.I followed the
guide(dowload hplip
Can you run:
snmpwalk -Os -c public -v 1 IP.ADDRESS.HERE 1.3.6.1.4.1.11.2.3.9.1.1.7.0
(where IP address--put the printer IP address)
[EMAIL PROTECTED] wrote:
First of all sorry for my English.
I tried to install my hp 2100 tn on ubuntu dapper drake.I followed the
guide(dowload hplip
I'm having a hard time reproducing this, I've printed a document well
over 80 pages with no problems. I'm curious if this is happening on all
documents and what application you are printing with?
Thanks!
A
Alexandre wrote:
I did send a e-mail with the problem in that HP PSC 1510 do not
Hey Josh,
Can you send me how you have the printer configured in CUPS? I've been
trying to reproduce this but I am not having much luck..
Thanks!
A
josh wrote:
Hi,
it says in the FAQ that too light images are fixed in HPIJS 1.3. I'm
using hpijs 2.6.7 + hplip 1.6.7 and all grayscales are
*Von:* dwelch91 [mailto:[EMAIL PROTECTED]
*Gesendet:* Donnerstag, 7. September 2006 17:22
*An:* Aaron J Albright
*Cc:* Volkmann, Martin; hplip-help@lists.sourceforge.net
*Betreff:* Re: [Hplip-help] Hp-makeuri failed with error: Device
not found
Also, do you have net-snmp
Hey Rex,
The URI for the printer should look like:
hp:/usb/Deskjet_6980_series?serial=MY5974Q03Q04CW
Can you run hp-check and post the output? Have you tried using hp-setup
to configure the printer?
Thanks!
A
Rex Bachmann wrote:
Aaron J Albright wrote:
/Rex,
Sorry I'm not exactly
Adam,
Currently fastdraft mode is not supported.
Sorry for any inconvenience.
Aaron
Adam wrote:
Hi guys 'n gals,
I've searched around and can't seem to find reference to this problem in
the mailing lists. I'm running Suse 10.1 which has (so Yast2 says) hplip
0.9.7 hplip-hpijs 0.9.7
Can you ping the device?
A
Volkmann, Martin wrote:
Hello!
The Command hp-makeuri --logging=debug 10.104.0.207 failed with this:
HP Linux Imaging and Printing System (ver. 1.6.7)
Device URI Creation Utility ver. 4.2
Copyright (c) 2003-6 Hewlett-Packard Development Company, LP
This software
there is a problem.
Could you let me know if this problem occurs only in the most/more recent
version? If so, I can I uninstal this problem version so that I
compile/install an older version?
Victor Warner
On Tue, 05 Sep 2006 19:13:35 +0100, Aaron J Albright
[EMAIL PROTECTED] wrote:
Victor
can you run ps ax | grep hp and post the output?
A
Gerrit Visscher wrote:
Hi
hplip worked fine for some time in my gentoo machine, but now it won't start
anymore. When I start /etc/init.d/hplip start it fails and I find this
in /var/log/messages:
python: hpssd[6730] error: Server exited
Bjørn,
Usually the client error is an issue with cups or cups security settings...
Hope this gives you some direction...
Aaron
Bjørn T Johansen wrote:
Am I the only one that have experienced this problem??
BTJ
On Sun, 3 Sep 2006 17:40:48 +0200
Bjørn T Johansen [EMAIL PROTECTED] wrote:
I
What distro are you using?
Aaron
Silvano Catinella wrote:
Hello,
I have connected ah HP5440 printer to my Linux system. I have downloaded
recompiled the following softwares without error:
PyQt-x11-gpl-3.16
cups-1.2.2
foomatic-db-hpijs-20060823
foomatic-filters-3.0.2
hplip-1.6.7
Any chance I could get your document to test with?
Thanks.
Aaron
Wolfgang Schlueschen wrote:
Hi,
I'm using Open SuSE 10.1 with
hplip-hpijs-1.6.7-0.1
hplip-1.6.7-0.1
and
cups-1.2.0-0.1
cups-client-1.2.0-0.1
cups-libs-1.2.0-0.1
cups-devel-1.2.0-0.1
A page created with OpenOffice Writer
1 - 100 of 208 matches
Mail list logo
