Before coming back here, and reading that I needed to set the interface to
"Expert" to get the translation parameters,
I found no way to add them, and just did the Lens b parameter, and got a
perfect result!
(see new image added to the imgur page)
(Maybe TOO perfect - I'm not sure that it might
On Mon, 21 Feb 2022 at 11:46, johnfi...@gmail.com
wrote:
> On Monday, February 21, 2022 at 5:52:13 AM UTC-5 bruno...@gmail.com wrote:
>
>>
>> The XYZ Translation parameters are initially hidden as they are not
>> needed for normal usage, they are made available by selecting Menu ->
>> Interface
On Monday, February 21, 2022 at 5:52:13 AM UTC-5 bruno...@gmail.com wrote:
>
> The XYZ Translation parameters are initially hidden as they are not needed
> for normal usage, they are made available by selecting Menu -> Interface ->
> Expert.
>
> That is one of the reasons I think only the
On Mon, 21 Feb 2022 at 02:31, scott092707 wrote:
>
> I actually did bring up the Optimizer Tab as before (since it solved the
> last issue), but the only optimizations presented to me this time were
> yaw/pitch/roll.
> I'll try again tomorrow (?) and see where one can ADD parameters, and do
> the
Well, I'll look into that.
I actually did bring up the Optimizer Tab as before (since it solved the
last issue), but the only optimizations presented to me this time were
yaw/pitch/roll.
I'll try again tomorrow (?) and see where one can ADD parameters, and do
the 'translation y'.
I'll also
On Sunday, February 20, 2022 at 4:52:32 PM UTC-5 scott092707 wrote:
>
> New problem:
>
> I have a two-photo vertical panorama of a building (with a neat bunch of
> sculptures at the top), and despite indicating the entire sides of the
> buildings in each photo of the same lines - bottom to