Edward Jaffe pisze:
Mark Jacobs wrote:
We have a problem when a hfs/zfs grows to a huge size and since partial
release doesn't work on these files to recover the allocated but unused
space we have to perform a copy process to a new dataset.
We have the same issue here. Our daily backups
Hi All,
Does anybody have exprience to use of XRC as a solution in DB2 for
replicating data
between 2 databases (on different lpars) which have been created separately?
I want to replicate data on a different database which I created like my
production database with similar objects names. I
Provide us some details.
In general, yes, there are scenarios where XRC can be used to replicate DB2.
--
Radoslaw Skorupka
Lodz, Poland
--
BRE Bank SA
ul. Senatorska 18
00-950 Warszawa
www.brebank.pl
Sd Rejonowy dla m. st. Warszawy
XII Wydzia Gospodarczy Krajowego Rejestru Sdowego,
nr
Hi folks
I've been trying to get HSM to backup to DASD daily backup volumes in a large
pool on our SAN. The benefit is that we get instant remote replication to the
DR site over Global Mirror, instead of messing around with replicating virtual
tape images and keeping those in sync, which has
Van : Shane [mailto:ibm-m...@tpg.com.au]
Is MCNVTCAT available with the server/pak orders? If not, what is
everyone using to define new entries into a new master catalog?
Use RCNVTCAT from the cbt. It has the same format/reports as MCNVTCAT
plus extras - all in REXX.
Shane ...
Hi Shane,
Kem do you have an APAR/PTF # for that?
We currently run MOBIUS MANAGEMENT SYSTEMS, INC. InfopacABS 1.5 and it has not
been tested anywhere we would have exposed this yet.
Best Regards,
Sam Knutson, GEICO
System z Performance and Availability
What parameter did you use - Markfull or Reuse? If for some reason you feel you
need to use Markfull, then you need to recycle on a regular basis to avoid
running out of available output volumes.
SETSYS -
PARTIALTAPE(BACKUP(REUSE) -
MIGRATION(REUSE))
I am not sure if there is CBTs that can teach JCL or CICS. However,
universities like Marist College do provide some web based education in
these areas.
What specifically are your requirements? Application programming? System
Programming? Student taking classes? Are you trying to get
I 'm trying to do this and I have some problem to have data everytime
available there.
I 'm doing this for a large table defined as partitioned , some of Its Indexes
were extended on 2 volumes selected from its storage group on db2 in source
side . I have to define them in the target system
Sorry Dave, I should have made clear that the Spill volumes are DASD volumes as
well, so MARKFULL, recycle etc doesn't apply (I'm not using any tapes at all,
everything's DASD).
Brian
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of
Hi listers,
I want to extract column information from SDSF in a REXX.
F.i. pagedef and formdef.
I can get and see a lot of data and columns but NOT pagedef and
formdef.
How can this be done?
Regards, Hans
Your use of Markfull explains why you have volumes that you can't use although
they are 99% empty. Reuse would make more sense. But that's just my opinion.
Why not open an ETR with IBM and get a definitive answer?
Dave O'Brien
NIH Contractor
From: IBM
They are found in the JDS (Job Data Set) panel,
with column names PAGEDEF and FORMDEF.
(And OD panel.)
Regards,
Thomas Berg
__
Thomas Berg Specialist IT-U SWEDBANK
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List
snip
What about IBM's GENERATE command
unsnip
Is the GENERATE function/command a Tivoli only function? I don't see it in
1.9 or 1.10 but I've not found things before.
Jack Kelly
202-502-2390 (Office)
--
For IBM-MAIN subscribe
http://publib.boulder.ibm.com/tividd/td/ITACMzOS/SC23-7973-00/en_US/HTML/ckm_ugtfrm.htm
Van : John Kelly [mailto:john_j_ke...@ao.uscourts.gov]
snip
What about IBM's GENERATE command
unsnip
Is the GENERATE function/command a Tivoli only function? I don't see it in
1.9 or 1.10 but I've not
In listserv%200904032002232455.0...@bama.ua.edu, on 04/03/2009
at 08:02 PM, gsg gsg_...@yahoo.com said:
I need to learn REXX and fast.
Assuming that you're talking about MVS, start with the REXX documentation
in the TSO/E bookshelf. You might want to read my Safe REXX article at
In 49d70005.6030...@phoenixsoftware.com, on 04/03/2009
at 11:36 PM, Edward Jaffe edja...@phoenixsoftware.com said:
The worst thing about REXX is that is has no interface to IKJPARS.
It also doesn't support the full functionality of the TSO stack. However,
a package called XPROC provides an
Well, well, well, John, did you see what I saw???
SC23-7973-00 ITACM V2R1
? Copyright Rocket Software Inc., 2007 !
Never payed attention to it ...
jan
Van : John Kelly [mailto:john_j_ke...@ao.uscourts.gov]
snip
What about IBM's GENERATE command
unsnip
Is the GENERATE function/command a
Where are you seeing two versions? Please let me know so that we can clean
that up.
Also, the correct spot in the book is Part 2 instead of Chapter 2. My
apologies for that error.
Here are direct links to the book:
PDF: http://publibz.boulder.ibm.com/epubs/pdf/e0z1k122.pdf
BookManager:
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of David Alcock
Sent: Wednesday, April 15, 2009 12:03 AM
To: IBM-MAIN@bama.ua.edu
Subject: Downloading IBM manuals
Every time a new z/OS operating system level comes along I go to the IBM
On Thu, 2009-04-16 at 11:02 +, Jan Vanbrabant wrote:
Hi Shane,
What about IBM's GENERATE command to generate IDCAMS control statements,
based on existing records in the specified BCS(s)? This command is a complete
replacement for the IBM utility, MCNVTCAT, which indeed is no longer
On Thu, 2009-04-16 at 07:59 -0500, Karla Arndt wrote:
Also, the correct spot in the book is Part 2 instead of Chapter 2. My
apologies for that error.
That was the source of my concern - I withdraw my allegation ... :p
Shane ...
would also like the apar number as well was there a asg ticket number
as well??
--
Email Disclaimer
This E-mail contains confidential information belonging to the sender,
which may be legally privileged information.
Thomas,
I know, but how to GET that info.
See REXX below:
/ REXX /
/**/
/*TRACE R
Two servers of interest to many on this group were missing from the
previously posted list:
Old IP address New IP address External Hostname (DNS) Date
-- -- --- -
207.25.253.62 170.225.15.62 inetsd01.boulder.ibm.com May 10
test
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
Initiate variable isfcols with (at least)
pagedef and formdef, e g:
isfcols = 'DDNAME STEPN PROCS PAGEDEF FORMDEF'
immediately before:
ISFACT ST TOKEN('token.jidx') PARM(NP ?) (PREFIX J_
Regards,
Thomas Berg
__
Thomas Berg Specialist
Paul Gilmartin wrote:
On Wed, 15 Apr 2009 12:53:11 -0400, Tony Harminc wrote:
AFAIK, all C compilers from ISVs require a prelinker step which, in turn,
is highly hostile to processing performed by SMP/E.
Certainly it is, but I'm not sure why compilers need such a step. Can
you give an
Did anyone find an official notification? This is all well and good, but I
can't take an email from a listserv
to the firewall guys. :(
MA
On Thu, Apr 16, 2009 at 9:40 AM, Kurt Quackenbush ku...@us.ibm.com wrote:
Two servers of interest to many on this group were missing from the
previously
Agreed this is not good..
There are still far too many ignorant managers out there who subbornly
refuse
to understand how important it is, especially for the z plattform, to
get new
interested people aboard. Freely available documentation is one pile of
that.
Too bad the bean counters are
Thomas,
Result:
SAY j_ddname.didx pagedef pagedef.didx j_pagedef j_pagedef.didx
SYSUT2 PAGEDEF PAGEDEF.4 J_PAGEDEF J_PAGEDEF.4
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of
Thomas Berg
Sent: Thursday, April 16,
Do you perhaps have LDAP enabled? That is the only other possibility for
the SOCKET issue.
Run the TESTCU exec and see what it reports for ldap and ip addresses/dns
names and ensure they are all set properly in XMITIPCU.
good luck
Lionel B. Dyck, Consultant/Specialist
Enterprise Platform
On Thu, 16 Apr 2009 09:36:25 -0400, Don Poitras sas...@sas.com wrote:
I guess you're saying that you need to use the binder to create Program
Objects. I think it would be difficult for an ISV to create their own.
I'm not sure why they would want to. There's certainly enough documented
info to
In a message dated 4/16/2009 9:14:15 A.M. Central Daylight Time,
delac...@gmail.com writes:
Any suggestions is greatly appreciated. Thanks in advance.
Hard to say w/o seeing results of OGL. One keyword is REPLACE on OVERLAY.
You should get a confirmation in output. This would update
I am looking for information on how I can do virtual tape using the
capabilities of DFSMS in an environment where we have CA-1 as our tape
management system and are using a StorageTek silo for our automated tape
library. Currently we are using a StorageTek VSM unit, which we would like to
get
Sanaz,
From what I read of your intent you may be better of using DB2 Data
Propagator from IBM, or RRDF from ENET Corp.
These products are working with the Database rather than the volumes, so
that dataset allocation and extensions will be transparent.
Ron
-Original Message-
From:
Jan Vanbrabant wrote:
Well, well, well, John, did you see what I saw???
SC23-7973-00 ITACM V2R1
? Copyright Rocket Software Inc., 2007 !
Never payed attention to it ...
Rocket acquired Mainstar.
--
Edward E Jaffe
Phoenix Software International, Inc
5200 W Century Blvd, Suite 800
Los
Yeah, I know, Ed.
My point was that you ''© Copyright Rocket Software Inc., 2007'' is indicated
in this IBM Tivoli Advanced Catalog Mgt User's Guide:
http://publib.boulder.ibm.com/tividd/td/ITACMzOS/SC23-7973-00/en_US/HTML/ckm_ugtfrm.htm
jan
Van : Edward Jaffe
Our JES2 system was receiving a large transmit file but it never got stored
on spool. Any ideas?
$HASP540 RUNHSTAX ON L50.SR1 FROM AXMO031 AT AVSCOM1 2,354,384 RECORDS
Regards,
John K
--
For IBM-MAIN subscribe / signoff /
On Thursday 16 April 2009, Jan Vanbrabant wrote:
Yeah, I know, Ed.
My point was that you ''© Copyright Rocket Software Inc., 2007'' is
indicated in this IBM Tivoli Advanced Catalog Mgt User's Guide:
http://publib.boulder.ibm.com/tividd/td/ITACMzOS/SC23-7973-00/en_US/HTML/ck
m_ugtfrm.htm jan
Ron Sam,
The official response from IBM was to fix the application code and clear out
any GETMAIN'd storage before using it.
I found the IBM APAR OA27291 from a previous post by Sam. This APAR only
provides a new workaround to the GETMAIN macro change.
The ASG incident was # 674406 and was
Paul Gilmartin wrote:
On Thu, 16 Apr 2009 09:36:25 -0400, Don Poitras sas...@sas.com wrote:
I guess you're saying that you need to use the binder to create Program
Objects. I think it would be difficult for an ISV to create their own.
I'm not sure why they would want to. There's certainly
I found the routine that is generating the error. It is the routine in
XMITIPCU that attempts to query the current host domain name.
Apparently you do not have your z/OS TCP/IP libraries in either linklist,
lpalist or steplib.
In our LPALIST we have SYS1.TCPIP.SEZALPA
and in our LINKLIST we
Have you run thought syslog looking for the RECEIVE messages as well as
scanning for the RUNHSTAX?
When I have had issues like that I usually need to know how big is the file,
what is the transmitting node.
Then I have to follow the messages in SYSLOG/OPERLOG to see what happened. I
am
On Thu, 16 Apr 2009 23:25:42 +1000, Shane ibm-m...@tpg.com.au wrote:
I am a contractor, and can't rely on any particular commercial product
being available when I arrive at a site - especially these days.
RCNVTCAT does the job, and is free. I have hacked it on occasion, but
that may have been
I am writing my first SDSF REXX program. The process is suppose to go to
specific output queues and get the tot-recs for each job. If I find a job is
GT 500,000 lines, then I will need to modify the printer to accept it, then put
the printer back.
While reading the documentation I did not
does anyone know if this also effects SWEEP's job/pgm??
--
Email Disclaimer
This E-mail contains confidential information belonging to the sender,
which may be legally privileged information. This information is intended
I don't know about the particular product that you asked about, but we found
that this affected so many different software products in so many different
ways that we threw up our hands and installed UA45583 and kept the DIAGxx
default of USEZOSV1R9RULES(YES) in order to revert back to the
This has been discussed in great detail earlier. We discovered this
issue during our 1.10 ESP, but I would like to clear up one of the
statements in this post...The GETMAIN Macro did not change, what changed
is the way that storage within a gotten page is allocated, top down
versus bottom up. When
Mark,
Try xmitip, we use it to do our scrt report. It is a long time since I
refreshed it, and cannot tell you on which tape it lives, but it even has a
tso panel in which you can do the same as batch, the formats, if I remember
- already signed off for the week, includes pdf xls. Ours come as a
Larre
the UA45583 is 1.10...we are 1.9 see no other hits for 1.9 unless a ptf
is causing this that we may have picked up?
- Forwarded by Ron Wells/AGFS/AGFin on 04/16/2009 12:38 PM -
Larre Shiller larre.shil...@ssa.gov
Sent by: IBM Mainframe Discussion List IBM-MAIN@bama.ua.edu
I have all those libraries in the LNK LPA list. What domain name is it
trying to query?
From: lionel.b.d...@kp.org [mailto:lionel.b.d...@kp.org]
Sent: Thursday, April 16, 2009 11:25 AM
To: Mark Steely; IBM-MAIN@BAMA.UA.EDU
Subject: RE: XMITIP Socket failure
It is trying to query the domain of the active z/OS system.
It is possible you don't have the rexx sockets in the lpa/linklist - i
don't recall the library for that.
Lionel B. Dyck, Consultant/Specialist
Enterprise Platform Services, Mainframe Engineering
KP-IT Enterprise Engineering
PW ADD Mahi40lb#
Chris Steffens
Operating Systems Engineer
Wells Fargo Financial
MAC F4030-033
800 Walnut Street
Des Moines, IA 50309-3636
Phone: 515-557-7098
Cell : 515-490-7563
Text Pager: (central Iowa only 5158490...@myairmail.com
BLOCKED::mailto:5158490...@myairmail.com )
This
Better use a different one now
Len Rugen
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Chris Steffens
Sent: Thursday, April 16, 2009 1:00 PM
To: IBM-MAIN@bama.ua.edu
Subject:
PW ADD Mahi40lb#
OS- z/OS 1.7 put RSU0809
DFHSM SETSYS MAXBACKUPTASKS(1) and DUPLEX BACKUP(N)
When AUTOBACKUPSTART DFHSM is allocating two tape drives. Even though
the Setsys is set to MAXBACKUPTASK (1).
Any ideas why?
Thanks, Jaime
... see below...
Don Poitras wrote:
Paul Gilmartin wrote:
On Thu, 16 Apr 2009 09:36:25 -0400, Don Poitras sas...@sas.com wrote:
I guess you're saying that you need to use the binder to create Program
Objects. I think it would be difficult for an ISV to create their own.
I'm not sure why
Not according to the manual:
Explanation: MAXBACKUPTASKS(nn) is an optional parameter specifying the
maximum number of volume backup tasks DFSMShsm can concurrently process.
For nn, substitute a decimal number from 1 to 15 to represent the number
of volume backup tasks to be run concurrently.
On Wed, 15 Apr 2009 20:11:21 -0500, Paul Gilmartin
paulgboul...@aim.com wrote:
...
But, why with such short notice?
To encourage use of domain names rather than IP addresses.
...
A worthy goal, but not an effective technique. Access lists, NAT
tables, etc., usually require IP addresses, not
I just discovered that the sending node issued a $CJ command on the
transmit job. Thanks for your help.
Regards,
John K
Lizette Koehler of the IBM Mainframe Discussion List IBM-MAIN@bama.ua.edu
wrote on 04/16/2009 11:29:12 AM:
Have you run thought syslog looking for the RECEIVE messages as
On 15 Apr 2009 14:17:53 -0700, w...@rubin-software.de (Wolfgang
Schäfer) wrote:
Hello Howard,
your answers are below the quote (at least in this case) ... and yes, I had
to scroll down to read your answer.
I only quoted a tiny bit (most everybody agrees that some quoting is
good). When I read
From the ibm pub on rexx sockets:
The EZBRXSOC load module is defined with two load module |aliases:
RXSOCKET and SOCKET. When a program invokes the REXX socket function,
|either the load module or an alias is called. The load module and its
aliases |reside in the TCPIP.SEZALOAD data set. The
Thanks for the REXX routine to verify the setup - To make the REXX
routine and the XMITIP work was to add the TCPIP SEZALNK2, SEZATCP, and
SEZALOAD
libraries as steplibs and add the SYSTCPD dd statement. I think I had
to do that because we have 2 different TCPIP stack executing (IBM CA).
The
The subject is to give the false impression that this is on topic.
The real topic: The status of Lionel.
Lionel, you are still around with a Kaiser email addr.
Is this good news or just bad news delayed?
I was afraid we might have heard the last of you - especially with
the disclaimer on your
In a message dated 4/16/2009 2:24:33 P.M. Central Daylight Time,
jkali...@csc.com writes:
just discovered that the sending node issued a $CJ command on the
transmit job. Thanks for your help.
No use cluttering up SPOOL with a job that's already run?
**Great deals on Dell’s
I am still with Kaiser for the time being. The outsourcing to IBM services
occurs on 5/16 at which time I will transition to their employ while still
working at Kaiser. What that means for the future/support of XMITIP I
can't tell you yet but I do have a request in to have a meeting with our
I agree that's what the manual says. In my testing the smallest I could
get it down to was two. Specifying 1 acted like 2. Since this was my
sandbox and our production environment would be greater than 2 task, I
did not follow up with IBM.
1 task - 1 input - 1 output - 2 drives
Jay Campbell
IBM OS Support Section
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of O'Brien, David W. (NIH/CIT) [C]
Sent: Thursday, April 16, 2009 3:03 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re:
Er Jay, We're talking about tape drives here.
1 Backup Task should have 1 DASD unit as input and 1 Tape unit as output.
The OP specified Duplexing was turned off.
Dave O'Brien
NIH Contractor
From: IBM Mainframe Discussion List [ibm-m...@bama.ua.edu] On
Is any other function auto-starting at the same time?
What types of tapes (backup, CDS backup, dump, or migration) is it
mounting on each allocated drive?
Do you set any of the DSBACKUP options (tape tasks defaults to 2)?
-Original Message-
From: Jaime Miranda
Another related problem...was just informed the following is occuring
since we put on rsu0812..
IEF085I REGION UNAVAILABLE, ERROR CODE=20
we are readjucting the region parm to 7m from 8m to see if that
works.so something has changedno word from ibm nor asg on open
tickets...
If REGION=7M gets IEF085I, I rather expect REGION=8M will also. Has the size of
your private area shrunk, say by 1M?
Bob
Ron Wells wrote:
Another related problem...was just informed the following is occuring
since we put on rsu0812..
IEF085I REGION UNAVAILABLE, ERROR CODE=20
we are
Ron Wells wrote:
Another related problem...was just informed the following is occuring
since we put on rsu0812..
IEF085I REGION UNAVAILABLE, ERROR CODE=20
we are readjucting the region parm to 7m from 8m to see if that
works.so something has changedno word from ibm nor asg on open
I'm looking for some tuning recommendations when using SYNCSORT. We
have been noticing some of our jobs running longer. We also noticed that on
our SORTWORKS that we are doing alot of Dynamic Allocations on top of what
we are preallocating. I was told that this Dynamic Allocation could add
I would be happy to help. If you would send me a copy of the sort
messages from one of these jobs I can take a look and see if it is
something obvious. Using DYNALLOC to get SORTWK space should not have
that kind of effect on performance.
John Reda
Syncsort, Inc.
-Original Message-
He did lower it from 8M to 7M. In IEFUSI, I set skip availability flag
so a fragmented initiator will not cause a problem. As always, protect
LSQA and runaway variable getmains using limit and size.
Dennis Roach
GHG Corporation
Lockheed Martin Mission Services
Flight Design and Operations
Barry,
The Setsys DSBACKUP (TAPE (TASKS (1)) and backup is a DASD incremental
Backup.
Thanks,Jaime
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the
Roach, Dennis (N-GHG) wrote:
He did lower it from 8M to 7M.
Sorry. I misread what he planned to do. Funny, so did Bob Rutledge. So,
at least that means I can be embarrassed in good company. :-[
--
Edward E Jaffe
Phoenix Software International, Inc
5200 W Century Blvd, Suite 800
Los Angeles,
Ron Wells wrote:
Another related problem...was just informed the following is occuring
since we put on rsu0812..
IEF085I REGION UNAVAILABLE, ERROR CODE=20
we are readjucting the region parm to 7m from 8m to see if that
works.so something has changedno word from ibm nor asg on open
Well, *I* can claim age as an excuse for not reading all the words. :)
Bob
Edward Jaffe wrote:
Roach, Dennis (N-GHG) wrote:
He did lower it from 8M to 7M.
Sorry. I misread what he planned to do. Funny, so did Bob Rutledge. So,
at least that means I can be embarrassed in good company. :-[
Bob--we checked and private area is the same
--
Email Disclaimer
This E-mail contains confidential information belonging to the sender,
which may be legally privileged information. This information is intended
only for
Ed---what I have in Diagxx
VSM TRACK CSA(OFF) SQA(OFF)
VSM TRACE GETFREE(OFF)
VSM ALLOWUSERKEYCSA(YES)
--
Email Disclaimer
This E-mail contains confidential information belonging to the sender,
which may be legally
Getting sometimes...
No IMS--but we do run MQ DB2 and naturally CICS
The changes in lpa/csa was minimal..but may have been enough to break
camels back..
- Forwarded by Ron Wells/AGFS/AGFin on 04/16/2009 04:11 PM -
Richard Peurifoy r-peuri...@neo.tamu.edu
Sent by: IBM Mainframe
Below is a screenshot of current and before
Virtual Storage map now (RSU0812)
Menu Utilities Compilers Help
¢¢¢
BROWSEGSF Utilities - SHOWzOS R716 CHARS 'Virtual
Storage'
Command ===
Bob Rutledge wrote:
Well, *I* can claim age as an excuse for not reading all the words. :)
But, according to Art Gutowski and others, I'm technically as old as
you--though cryogenically frozen for a couple of decades. (Talk about a
bad hair day.) :-D
--
Edward E Jaffe
Phoenix Software
Ron Wells wrote:
Ed---what I have in Diagxx
VSM TRACK CSA(OFF) SQA(OFF)
VSM TRACE GETFREE(OFF)
VSM ALLOWUSERKEYCSA(YES)
Vsm CheckRegionLoss(512K,25M)/* Restart INITs when fragmented */
Don't know if it will help in this case or if these would be the best
values for your
He did lower it from 8M to 7M. In IEFUSI, I set skip availability flag so a
fragmented initiator will not cause a problem.
Is that really an issue, any more?
I thought IBM 'fixed' fragged inits?
-
Too busy driving to stop for gas!
My CSA is only 5MB leaving an almost 12MB private, but when we ran IMS, CSA
was much larger. Of course that was long ago, for all I know IMS may have
moved this above the line or to a dataspace by now.
CSA was moved above the line, a long time ago.
V3.1, I believe.
-
Too busy driving to stop
Roach, Dennis (N-GHG) wrote:
He did lower it from 8M to 7M. In IEFUSI, I set skip availability flag
so a fragmented initiator will not cause a problem. As always, protect
LSQA and runaway variable getmains using limit and size.
What about coding something above 16MB like REGION=32M? Doesn't
On Thu, 16 Apr 2009 15:02:18 -0500, Ron Wells rwe...@agfinance.com wrote:
Another related problem...was just informed the following is occuring
since we put on rsu0812..
IEF085I REGION UNAVAILABLE, ERROR CODE=20
I would use RMF reports or health checker if you have it installed (or any
other
Ron Wells wrote:
Below is a screenshot of current and before
Region V=V6000 009F 10216K 9.9M
Region V=R6000 00025FFF 128K.1M
PSA+System6000 6000 0K.0M
This indicates you have almost 10MB for private,
What UNIT type is used for CDSVERSIONBACKUP?
Terry Traylor
charlesSCHWAB
TIS Mainframe Storage Management
Remedy Queue: tis-hs-mstg
(602) 977-5154
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Jaime Miranda
Sent: Thursday, April
You may need to look at using the DELEAYED or DELAYED2 option on the ISFEXEC
call to get these variables. Check the ISFCOLS and ISFCOLS2 variable on return
to see what variables are there for your choosing.
Sean
-Original Message-
From: IBM Mainframe Discussion List
pity -- giving up a beautiful solution. must be the $$cost$$ ...
as your subject header states, use TMM - which i term as a poor man's VSM.
there is a manual on Volume Mount Analyzer which will assist in identifying
the potential candidates for TMM. HSM will perform the stacking for you.
you'll
check:
1. duplexing of tape
2. ARCCMD member for HSM activities at that time
3. any ONLYIF HSMHOST() employed in the ARCCMD
4. ARCINBAK being used by any jobs at that time
- ravi.
On Thu, 16 Apr 2009 15:43:10 -0500, Jaime Miranda jamir...@sdccd.edu wrote:
Barry,
The Setsys DSBACKUP (TAPE
Terry,
Setsys for CDSVERSIONBACKUP
SETSYS CDSVERSIONBACKUP(BACKUPCOPIES(4)
BACKUPDEVICECATEGORY(DASD)
DATAMOVER(DSS))
Thanks, Jaime
--
For IBM-MAIN subscribe / signoff / archive access
Great tip!
Thanks,
Linda
- Original Message -
From: John P Kalinich jkali...@csc.com
To: IBM-MAIN@bama.ua.edu
Sent: Wednesday, April 15, 2009 5:44:35 AM GMT -08:00 US/Canada Pacific
Subject: Re: Downloading IBM manuals
For a given folder, select VIEW/CHOOSE DETAILS... from
Mike,
Of course you can have a full-functional virtual tape solution without the
hardware, its called CA-Vtape ;}
With CA-Vtape, you use your existing DASD as the cache for staging the
virtual volumes but how much cache you have will depend on how quickly you
want to backstore to the physical
Xpediter users who debug DB2 Stored Procedures should download and install
PTF XTF0118 before upgrading to z/OS 1.10.
The PTF is available on Compuware's Frontline Technical Support website:
frontline.compuware.com
or by calling Compuware at 1 800 538 7822.
Outside of the USA or Canada,
At 15:49 -0400 on 04/16/2009, O'Brien, David W. (NIH/CIT) [C] wrote
about Re: DFHSM MAXBACKUPTASKS(1) using 2 drives:
Er Jay, We're talking about tape drives here.
1 Backup Task should have 1 DASD unit as input and 1 Tape unit as output.
The OP specified Duplexing was turned off.
Dave
1 - 100 of 103 matches
Mail list logo
