I just logged on. It works fine here.
Confidentiality notice: The information included in this e-mail,
including any attachments, is for the sole use of the intended recipient
and may contain confidential and privileged information. Any
unauthorized review, use, disclosure, distribution or
Tom,
We just encountered a variation of your problem. In our case, a tape
problem caused a return code 8, and no abend. The inputdataset had
disp(old,delete,keep). The input thus was deleted.
We have changed our jobstream to do condition code checking in a
follow-on job step, and delete the
Meganen,
I just applied maintenance to take us from z/OS 1.8 at RSU0704 to
RSU0710 + HIPER. It came to just about 900 PTFs. I wonder if you
received all the PUT maintenance available instead of just the recommend
RSU levels.
John
Confidentiality notice: The information included in this
Bill,
Look at OA20748. There is no fix available for it yet, and it describes
a performance problem with catalogs in ECS mode and autotuning enabled.
The recommendation is to F CATALOG,DISABLE(AUTOTUNING) until a fix is
available.
John
Confidentiality notice: The information included in this
I just searched on IBM's primary page at www.ibm.com.
The first hit took me to
http://www-306.ibm.com/software/awdtools/ispf/support/.
That page, ISPF for z/OS has a link
Download
. TASID V5.14 tool
It allowed me to download files for the tool.
John
Confidentiality
That one took about 30 seconds to figure out.
HOLD SYSMOD APAR ---RESOLVING SYSMOD HOLDHOLD
FMID NAME NUMBERNAMESTATUS RECEIVED CLASS SYMPTOMS
UA31645 AA21256 UA35069 GOOD YESPE
See that there entry, UA31645? It is
Joseph,
That is the ENHANCED HOLDDATA. You don't need to read any of it, just
receive it into your SMPE GLOBAL CSI. As you can see in the header, it
is as current as the previous day. Make sure there are no gaps in
holddata received. In your example, the file covers only the last
month. You
Joseph,
The 90 days worth of holddata might be correct in this case, just
because your system, built in July, is less than 90 days old. There
won't be a gap in the holddata. Before you run any report, retrieve
current holddata into your system that covers back to the last date you
retrieved
Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Ed Gould
Sent: Thursday, August 16, 2007 2:42 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: Listing HIPERS
On Aug 16, 2007, at 10:28 AM, Tergerson, John wrote:
SNIP__
Ed, if you really
Joseph,
I think the easiest way to do this is to rely on ENHANCED HOLDDATA.
Make sure you have received current holddata, and then run an SMPE
report:
SETBOUNDARY (GLOBAL) .
REPORT
ERRSYSMODS
ZONES(
MVST100
George,
We got an 0C4, and also a U0083 symptom using DFSORT to do reorgs on a
tablespace with a lot of indexes.
The DBA had set up sortnum to 160 so they would never have to compute
sort work space. When they reduced it to 80, things worked fine. The
tablespace with the problem was small, but
List [mailto:[EMAIL PROTECTED] On
Behalf Of Tergerson, John
Sent: Wednesday, August 01, 2007 11:21 AM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: SOC4 in DFSORT with DB2
George,
We got an 0C4, and also a U0083 symptom using DFSORT to do reorgs on a
tablespace with a lot of indexes.
The DBA had set up
We had the same symptom a couple of weeks. The hardware CE swapped tape
units and swore he had no problem because two separate drives had the
same problem that didn't go away when he swapped in a working drives
that would then fail. He finally found that both drives had bad channel
interface
APAR Identifier .. II13276 Last Changed 06/07/25
HELP FOR CBRXLCS NO DEVICE POOLS EXIST ...
Symptom .. MS MSGIGD306IStatus ... CLOSED CAN
Severity ... 4 Date Closed . 02/04/25
Component .. INFOV2LIB
That happened to us with a CICS V2.2 system. It was using the old
master console ID. The CICS system programmer changed to a legitimate
console and it worked.
John
Confidentiality notice: The information included in this e-mail,
including any attachments, is for the sole use of the intended
Steve,
Since we stopped defining all DASD to JES3, we get that message for each
DASD dataset in each DD card. It is normal.
John
Confidentiality notice: The information included in this e-mail,
including any attachments, is for the sole use of the intended recipient
and may contain
Our SAP basis team will shut down the AIX application
connection at 1:45 AM Sunday, and reconnect at 3:15 AM.
The application will tolerate only something like a
five minute difference in timers
I don't know what they do to set their clocks on
the application server boxes, but at 2 AM we will
I don't know where the problems are limited to, but I have been on
IBMLink all day.
I just logged on to ShopzSeries, and got in right away.
Confidentiality notice: The information included in this e-mail,
including any attachments, is for the sole use of the intended recipient
and may contain
Allan,
Rob Scott's answer is probably what is happening to you.
As an example, we just went through the same sort of problem. A vendor
monitor was issuing getmain for some function, and never issuing
freemain when finished with the storage. It built up over time to the
point that the monitor
Both PTFs show a status OPEN. They must be still building them.
John
Confidentiality notice: The information included in this e-mail,
including any attachments, is for the sole use of the intended recipient
and may contain confidential and privileged information. Any
unauthorized review, use,
review,
use, disclosure, distribution or similar action is prohibited. If you are
not the intended recipient, please contact the sender and delete all copies
of the original message immediately.
-Original Message-
From: Tergerson, John
Sent: Thursday, September 21, 2006 10:48 AM
To: IBM-MAIN
Steve,
We saw this too. Look at OA06051.
Don't despair.
John
-Original Message-
From: Steve Flynn [mailto:[EMAIL PROTECTED]
Sent: Friday, May 12, 2006 5:43 AM
To: IBM-MAIN@BAMA.UA.EDU
Subject: z/OS 1.6 - step-time rounding errors...
We upgraded to zOS 1.6 last weekend. On Monday I
D UNI,ALL will show the table active in the system.
-Original Message-
From: Steve Comstock [mailto:[EMAIL PROTECTED]
Sent: Tuesday, March 07, 2006 1:33 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Need quick response; display uni command syntax
Colleague is teaching our COBOL Unicode class;
0508 indicates the PTF was on PUT tape 0508. For UA19532, the SOURCEID in
SMP will show PUT0508 and RSU0512.
Radoslaw asked:
-Original Message-
From: R.S. [mailto:[EMAIL PROTECTED]
Sent: Wednesday, February 08, 2006 7:23 AM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: Applicable
Shane,
I have successfully used this to delet a vvds from a volume.
//STEP1 EXEC PGM=IDCAMS
//DD1DD VOL=SER=MVSSM3,UNIT=3390,DISP=OLD
//SYSPRINT DD SYSOUT=*
//SYSIN DD *
ALTER
25 matches
Mail list logo
