So now U know why.
ITschak
On Thu, Jun 7, 2012 at 9:55 AM, Mauri Kanter itzuv...@013.net.il wrote:
MTU is 1492 (no jumbo frames)
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
Have you looked into MTU on the link definition?
ITschak
On Wed, Jun 6, 2012 at 8:23 PM, Mauri Kanter itzuv...@013.net.il wrote:
I'm unaware of the max value they specified on their stack ... But I
understood their TCP stack is configured with send/receive buffers also of
256K. On my stack
You trap the output using a parameter of the HLIST command Did you try REXX
OUTTRAP function?
ITschak
On Fri, Jun 1, 2012 at 7:43 PM, Lizette Koehler stars...@mindspring.comwrote:
Cross Posting to IBM Main and TSO-REXX
I have a Rexx process that issues the HLIST command. I have been
It was not me ;-)
Itschak
On Tue, May 29, 2012 at 9:50 PM, Ed Finnell efinnel...@aol.com wrote:
_BBC News - Flame: Massive cyber-attack discovered, researchers say_
(http://www.bbc.com/news/technology-18238326)
Seems too big to be unnoticed...anyway, fascinating is ability to load
used HDS devices?
On Mon, May 21, 2012 at 8:26 PM, Arye Shemer aryeshe...@gmail.com wrote:
Hello forumers,
We already tried Tapecore and we thought trying out luck here.
I have been asked to look for tape drives with magazine or autoloader for
cartridges (like the old 3590 with ACL),
To
have a look at the cics bridhe (also known as 3270 bride). The bridge is
jus ta couple of glue exits that mimics the terminal and works in several
protocols outside of cics.
ITschak
On Fri, Apr 6, 2012 at 11:15 PM, R.S. r.skoru...@bremultibank.com.plwrote:
W dniu 2012-04-06 21:54, Staller,
Yes it does. Have a look also at Imperva. They do much the same with Neon's
collector.
ITschak
On Fri, Apr 6, 2012 at 4:11 PM, Donald Likens dlik...@infosecinc.comwrote:
I've been looking through the IBM InfoSphere Guardium S-TAP for DB2 on
z/OS manual. In this manual they talk about a Audit
Is this possible to load (not link) a module into storage using Rexx? We
have a compiled table I need to examine using rexx and want to avoid
assembler coding in order to make the application simple. Thanks for your
ideas.
ITschak
They are saved at the applEDIT table at the user ISPFROF dataset. It is a
table like ny other. TBOPEN, TBDELETE, etc. will do the work.
ITschak
On Thu, Mar 1, 2012 at 1:57 PM, David Cole dbc...@colesoft.com wrote:
Does anyone know if there is a way to delete a no longer needed named ISPF
Did you CONSPROFed the console first?
ITschak
On Thu, Feb 23, 2012 at 8:06 PM, Veilleux, Jon L veilleu...@aetna.comwrote:
Did you check to see if you had console authority?
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On
Behalf Of John Dawes
Why Download? If you ever installed Server pack or CBIPO, it is in the
installation (CPIPO/CPP) load library .
ITschak
On Wed, Feb 22, 2012 at 12:08 PM, Alvaro Guirao Lopez
alvarogui...@gmail.com wrote:
Hi list,
I want to download IPOUPTE or CPPUPDTE.
Is urgent.
Thanks and regards,
--
I would divide the problem into two:
1. how to make the file be transactional. to do this, you can use MQ as the
mechanism to write into a file.
2. where to fire the transaction. You can write the message into a queue
managed by CICS and LINK to the application program (not START TRAN that
will
Frank,
From IMS/DC point of view, It works almost the same. CICS has DBCTL that
perform as a limited DBRC as well as IMS/DC has the DLI DBRC address
spaces. Same commands, traces etc. Is this what your question refer to ?
ITschak
On Thu, Feb 16, 2012 at 2:04 AM, Frank Swarbrick
No, They are using Russian platforms for space flights (soon on Virgin)...
;-) No need for software or hardware. all supplied by the Russian space
industry. (I am jocking, of course).
ITschak
On Tue, Feb 14, 2012 at 3:13 PM, Scott Ford scott_j_f...@yahoo.com wrote:
All,
Very interesting
.
The IMS-L LISTSERV is a good place to learn about this, generally speaking
zOS generaliest do not maintain IMS configurations.
Best wishes
Avram Friedman
Avram Friedman
On Fri, 3 Feb 2012 13:04:55 +0200, Itschak Mugzach imugz...@gmail.com
wrote:
I have a C program that is called intensively
I have a C program that is called intensively more then 10 times per
second. As it runs under LE, it requires LE to re-create the language
execution environment which is a huge overhead for a small and short
running program. I want to eliminate LE to get involved. I thought that
static bind will
Nascimento Neto
BANCO BRADESCO S.A.
4254 / DPCD Engenharia de Software
Sistemas Operacionais Mainframes
Tel: +55 11 4197-2021 R: 22021
Fax: +55 11 4197-2814
-Mensagem original-
De: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] Em nome
de Itschak Mugzach
Enviada em: sexta
Itschak Mugzach
Enviada em: sexta-feira, 3 de fevereiro de 2012 09:05
Para: IBM-MAIN@bama.ua.edu
Assunto: C program and LE/IMS option
I have a C program that is called intensively more then 10 times per
second. As it runs under LE, it requires LE to re-create the language
execution
++.
Lloyd
- Original Message
From: Itschak Mugzach imugz...@gmail.com
To: IBM-MAIN@bama.ua.edu
Sent: Fri, February 3, 2012 8:01:36 AM
Subject: Re: C program and LE/IMS option
Hello Ituriel,
Yes, I looked @ METAL option but I do not know the difference between METAL
and GENASM, any
Thanks to all replied. There is another reason that I want to eliminated
LE, and this is that under certen environments it creaes an Encave which is
useless for the spec we have. So eminating LE is much more important then
just saving te mips of creating the environment. I am aware of CEEPIPI and
You sure? have a look at a mail titled: IBM announces 6% price increase for
z/OS, but as you signature states, facts are your facts, but opinions are
always opinions!
ITschak
On Wed, Jan 25, 2012 at 8:28 AM, Timothy Sipples timothy.sipp...@us.ibm.com
wrote:
Steve Comstock writes:
We are
;-)
On Tue, Jan 24, 2012 at 4:26 PM, Mohd Rizwan rizwaan.pa...@gmail.comwrote:
I am Mohammed ,
I have emulator software TN3270 in my PC, can antbody provide me the
dummy Mainframe Server link , so i can practice from my home, as i am
new to this technology
--
*Mohd Rizwan
9538451750*
What's wrong with CALL TSOLNK using TSOEXEC RL ...?. It will invoke TMP
and will run your command.
ITschak
On Mon, Jan 23, 2012 at 6:25 PM, Scott Ford scott_j_f...@yahoo.com wrote:
Sorry guys my fault, I should have explained. My LE COBOL program is APF
authorized.
I want to be able to all
http://www.source-recovery.com/
ITschak
On Thu, Jan 19, 2012 at 5:42 AM, jagadishan perumal
jagadish...@gmail.comwrote:
Hello All,
I am looking for a decompiler, reverse compiler, dissasembler of cobol LOAD
modules into cobol SOURCE modules for lost programs. Could any please
direct me to
We are looking for WMB (Websphere message Broker) customers that
implemented user authentication against Active Directory to learn from
their experience, performance implications, etc.
Thanks for one of the two (list address or your experience).
ITschak
Easytrieve inteprater uses program name eztpa00, so look for it in you FB
80 libraries. If you compiled your easytrieve programs, run a searchfor
(ISPF opt3.14) and find where it uses modules starting with et.
ITschak
On Sat, Jan 7, 2012 at 2:52 AM, gsg gsg_...@yahoo.com wrote:
Does anyone
Metz (Seymour J.)
shmuel+ibm-m...@patriot.net wrote:
In
caodpegswvyxyvhg+zjj-0y20o62x-uoex-p4dvymnkbmyni...@mail.gmail.com,
on 12/29/2011
at 08:40 AM, Itschak Mugzach imugz...@gmail.com said:
I don't want to install WSA.
Then you don't know what it is.
I am interesting in the technique
In a help panel (ISPWSDH1) explaining how to download the ISPF C/S client
(ISPF OPT3.7), it says that you can also choose to have ISPF create the
directory on your workstation For other purpose, i wonder how can this
be done other then VBSCRIPT?
ITschak
/28/2011
at 06:25 AM, Tom Marchant m42tom-ibmm...@yahoo.com said:
On Wed, 28 Dec 2011 10:49:00 +0200, Itschak Mugzach wrote:
In a help panel (ISPWSDH1) explaining how to download the ISPF C/S client
(ISPF OPT3.7), it says that you can also choose to have ISPF create the
directory on your
Itschak Mugzach of the IBM Mainframe Discussion List IBM-MAIN@bama.ua.edu
wrote on 12/27/2011 06:23:12 AM:
I am looking for a manual or help file for PDSMAN (I have a copy of PDS84
load module). Thanks for a copy
I am looking for a manual or help file for PDSMAN (I havea copy of PDS84
load module). Thanks for a copy.
ITschak
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the
Not really. It is not my machine, and can't install help files/panels.
ITschak
On Tue, Dec 27, 2011 at 9:01 PM, Ed Finnell efinnel...@aol.com wrote:
PFK1 is pretty good too
In a message dated 12/27/2011 8:17:00 A.M. Central Standard Time,
jkali...@csc.com writes:
PDSHELP and
No, I can't. PDSMAN was already (partially) installed in the past as part
of a vendor product...
ITschak
On Tue, Dec 27, 2011 at 9:49 PM, Ed Finnell efinnel...@aol.com wrote:
But you can install powerful load modules? Oh well, use XMIT-Manager off
the CBT tape to look at the prose files on
:-)
2011/12/26 Yifat Oren yi...@tmachine.com
DB2-L at http://www.idug.org.
Best Regards,
Yifat
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On
Behalf
Of Arye Shemer
Sent: יום ב 26 דצמבר 2011 11:38
To: IBM-MAIN@bama.ua.edu
Subject:
This is the posting addr: IDUG DB2-L db...@idugdb2-l.org. As seen,
the list server managed by IDUG
On Mon, Dec 26, 2011 at 11:37 AM, Arye Shemer aryeshe...@gmail.com wrote:
Hello forummers,
Is there any DB2 discussion list like IBM-MAIN in which I can post question
or ask for help ?
This is the posting address. To register use IDUG.
Regards,
ITschak
On Mon, Dec 26, 2011 at 11:37 AM, Arye Shemer aryeshe...@gmail.com wrote:
Hello forummers,
Is there any DB2 discussion list like IBM-MAIN in which I can post question
or ask for help ?
Thanks,
Arye Shemer.
/26/2011
at 11:54 AM, Itschak Mugzach imugz...@gmail.com said:
This is the posting addr: IDUG DB2-L db...@idugdb2-l.org. As
seen, the list server managed by IDUG
Does it accept normal listserv requests at lists...@idugdb2-l.org?
--
Shmuel (Seymour J.) Metz, SysProg and JOAT
Use MSG('ON'), msybe, for soe reason, you free the CATLGWORK dataset.If so,
you'll se an IKJ/IDC message in the output. Send your sysprint temporarily
to a fileyou can read , there is a reason why IDCAMS write to the wrong
file (SYSTSRT nstead of your file) I would list the catalog directly to a
You can run several IP stacks in the same lpar.
ITschak
On Tue, Dec 20, 2011 at 8:45 PM, shai hess shai.h...@gmail.com wrote:
HI,
I have a customer question:
1. How could I configure MFNetDisk in ZOS in order to use ONLY the IP
192.168.254.200, instead of 192.168.254.254, because the
Hi,
Does anyone here uses the open source Cobos product as a replacement for
IBM RDZ?
regards,
ITschak
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET
Interesting point, Tom. Still, I wonder if someone here had the time to
look at it .
ITschak
On Wed, Dec 14, 2011 at 6:33 PM, Tom Marchant m42tom-ibmm...@yahoo.comwrote:
On Wed, 14 Dec 2011 14:53:57 +0200, Itschak Mugzach wrote:
Does anyone here uses the open source Cobos product
The best way is to use TSO console command in a REXX and trap output. Have
a look at SYS1.SAMPLIB(IEATOPS) for REXX sample.
ITschak
On Tue, Nov 1, 2011 at 12:41 PM, Tim Brown tbr...@cenhud.com wrote:
Is there a way in batch to issue a console command and direct the output
to a file
Like d
I believe the problem is not with Linux kernel itself, but what you run
under...
ITschak
On Tue, Oct 4, 2011 at 9:19 AM, Sheldon Davis sda...@isracard.co.il wrote:
Hi
Does anyone have a method of comparing x86 Linux vs IFL Linux? (Performance
and cost)
Thanks
Sheldon Davis
If you have Netview, Control-O or any other automation product, you can
capture start and stop messages (IEF695I/$hasp395) and send it via ip to
your desktop application.
ITschak
On Tue, Aug 23, 2011 at 2:10 PM, Scott Chapman sachap...@aep.com wrote:
That's essentially what we did for the
Hi Matan,
Listing the password is not possible, as you already know. You don't need to
know the user's password in order to use his access rights (if you are
authorised to do so). RACF let you use other user's authority using the
user.submit profile under the surrogat class. This function is
, Itschak Mugzach imugz...@gmail.com
wrote:
Hi Matan,
Listing the password is not possible, as you already know. You don't need
to
know the user's password in order to use his access rights (if you are
authorised to do so). RACF let you use other user's authority using the
user.submit
Variable LVLINE holds the last visible line of an area. If you know where
the area start on your panel, it is easy to know screen depth.
ITschak
On Thu, Aug 4, 2011 at 4:25 PM, Chuck Arney ch...@arneycomputer.com wrote:
In an assembler ISPF application I am trying to adjust the size of a
1. ftp://ftp.software.ibm.com/s390/zos/vse/download/xmps/vseesoc.pdf
2. ITschak
On Wed, Jul 6, 2011 at 6:01 PM, jagadishan perumal jagadish...@gmail.comwrote:
Hi Group,
I am trying to reach a URL :http://xxx.41.xxx.x:8080/MF/services from
mainframe Are there any sample Rexx that can
Look for EPV. Don;t know who resell that in your area, but I can send you
the local reseller here in Israel is you want (it is not me or my company
;-) )
ITschak
On Mon, Jun 20, 2011 at 4:36 PM, Tsai Laurence ltsai85...@gmail.com wrote:
Dears ,
as the subject, is there any tool can generate
I believe MVCL is less efficient as it is *interruptible* (has to update 4
GPRs) while MVC does this internally, does not change GPR's values and is
not interruptible.
ITschak
On Tue, May 31, 2011 at 7:13 PM, Kirk Wolf k...@dovetail.com wrote:
The IBM C compiler would generate an MVC loop.
While removing a user from the system, we archive his datasets with a new
name using DMS (Also known as CA-Disk). We discovered that the user may
already have datasets in the archive under his original HLQ. We don't want
to restore the datasets in order to rename them.
The alternative is a 2
Akaik yes. I have seen a message in the syslog saying that Adabas/Natural
capacity purchased runs over. This mean that the capacity is less then the
machine capacity installed.
ITschak
On Tue, May 3, 2011 at 8:47 AM, Mike Schwab mike.a.sch...@gmail.com wrote:
It was a joke. Everybodu uses USS for Unix System Services, including IBM.
ITschak
On Mon, May 2, 2011 at 4:37 PM, Shmuel Metz (Seymour J.)
shmuel+ibm-m...@patriot.net wrote:
In BANLkTi=jpi-63eacaownrokwg1rajpl...@mail.gmail.com, on 05/01/2011
at 08:27 PM, Itschak Mugzach imugz
Seymour,
It's not USSR (;-) ) but USS.
ITschak
On Sun, May 1, 2011 at 4:07 PM, Shmuel Metz (Seymour J.)
shmuel+ibm-m...@patriot.net wrote:
In listserv%201104132207206188.0...@bama.ua.edu, on 04/13/2011
at 10:07 PM, Neale Ferguson ne...@sinenomine.net said:
Quite possibly. I'm a
Afaik delete is done at unallocation of the dd. So the free command should
follow the allocate one. But why not just deleteing the dataset without
first allocating it?
Itschak
On Fri, Apr 1, 2011 at 12:59 PM, Hunkeler Peter (KIUP 4)
peter.hunke...@credit-suisse.com wrote:
//SYSTSIN DD *
Sure, using FTP exits.
ITschak
2011/3/31 גדי בן אבי gad...@malam.com
Hi,
One of our users wants an ftp transfer to fail if the data set already
exists.
z/OS is the server.
The client is windows.
Is this possible?
TIA
Gadi
לשימת לבך, בהתאם לנהלי
Hi Matan,
Have a look at the Vtoc tso command from CBTTAPE file 112. It checks against
each dataset listed in the vtoc against the catalog of the system the
command runs on. Be sure not to delete files that are catalogued onmore then
one system ;-)
Dash!
ITschak
On Tue, Mar 29, 2011 at 10:58
Let put some order. zAAP runs Java and XML parsing. zIIP can run Java (if no
zAAP installed using zAAP on ZIIP started at z/os v11). Enclave SRB is just
a requirement IBM put to use its interface into zIIP to run regular code,
but you must invoke the interface. This to say this is a requirement,
Do u use Omegamon or any other CICS monitor? They usualy use smf110 to save
history data and has the utilities to report on.
ITschak
On Sun, Mar 27, 2011 at 1:25 PM, John McKown joa...@swbell.net wrote:
We can't afford even the cost of the PC version of SAS. That's what we
were using. It got
Are you sure that racf is using the databases named in RACF ICHRDSNT or the
default one (if racf can't find those in DSNT. It is possible that you are
using a default (almost empty) DB but the users are still defined in UADS...
Try logon with IBMUSER password SYS1.
ITschak
On Thu, Mar 17, 2011
Thanks to those who replied. My question is more about the limitation IBM
took or put on IBM on pricing. For example. is this possible that one
customer will pay for a product (not a OTC product) and the other will not?
is this legal from IBM procedures point view? What I am trying to understand
let others provide a more authoritative response. Better yet, why not
ask your friendly IBM rep to answer this?
Bob
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Itschak Mugzach
Sent: Thursday, December 30, 2010 8:51 AM
To: IBM-MAIN
I wonder if it is possible to get a discount on MLC (ZLAC, etc.) software
like DB2, CICS etc. I was told that IBM is not allowed (internally and by
DOJ) to discount these products. Is this true? Where are these
limitations/rules are writen, if any?
ITschak
What's wrong with Jes2 Exit4?
ITschak
On Tue, Dec 28, 2010 at 2:19 PM, Doron Geva doron.geva...@gmail.com wrote:
Gadi,
To my knowledge, in OPS you can trap the file's allocation message (if the
file is sms managed) or
if the job name is known trap message $HASP373 or IEF403I and cancel the
I am using ISRSUPC to compare two datasets in line mode. It can identify
changed lines not only if are at the same line numbers, but the records can
be in different record numbers in the file. The problem is that this is a
limited range. For example line 10 in file a is '1234' and line 12 in file
Control-D bundling function uses indexing method to create report bundles
which does not really creates new files. The products I looked into, uses a
different technology that creates a phisical report file for each user.
I wonder if there are other products that uses mainframe created files to
Done that many times during security assessments at customers sites. for
example, Look at your SYS1.UADS dataset and compare it to RACF. You probably
will find users that are defined in your UADS dataset, but not in RACF. More
then that, IBM's ships UADS dataset with few users that probably not
Look at control nodisplay enter and display panel() cmd(panelid).
Use an ispf panel that foes nothing just to enter the command.
ITschak
On Tue, Sep 14, 2010 at 5:31 PM, Andy Robertson
andy_robert...@johnlewis.co.uk wrote:
Does anyone know a way to issue ISPF System Commands (eg PANELID,
I would try LISTDSI('xxx file). It might return the dsnname into SYSDSNAME
which you can investigate using member=(word(translate(sysdsname,'
',()'),2)
ITschak
On Thu, Sep 9, 2010 at 5:35 PM, CUNY Yann yc...@externe.generali.fr wrote:
Works fine ! thank you ...
-Message d'origine-
Gadi,
The easiest way is to move a value to zcmd seperated with semicolons.
Another option is to use the command table. The idea is, again, use the zcmd
field. Try this:
1.set your ispcmds to include a command called SDSF the invokes SDSF.
2. develop an empty ISPF panel (call it Pseudopan, if
Are you sure this is a job and not an STC? An STC might run under the master
address space and does not need Jes2 to start.
On Tue, Sep 7, 2010 at 4:21 PM, Miklos Szigetvari
miklos.szigetv...@isis-papyrus.com wrote:
Hi
SDSF REXX try to read the actual , running job and got JCT NOT
Is this Batch or Online? Anyway, you can start SDSF under ISPF and on the
parm/zcmd field move the following: prefix xxx;st;exit. But why bother?
there is an interface to SDSF from Rexx.
Itschak
2010/9/6 גדי בן אבי gad...@malam.com
Hi,
One of our users asked me if the following was possible:
I have z/Scope installed on my laptop. Be aware of the supported certificate
types. Not all of the emulators supports all types of certificates,
especially ARMs.
ITschak
On Tue, Aug 24, 2010 at 4:11 PM, Michael Saraco
michael.sar...@baer-consulting.com wrote:
Over the years and doing
Larger HSA? What is your D M=STOR shows before after the change?
ITschak
On Thu, Aug 5, 2010 at 11:46 AM, Sheldon Davis sda...@isracard.co.ilwrote:
Hi
We migrated to z/os 1.11 on one of our production machines.
Before the upgrade we had almost no paging.
We now see quite a lot of paging
This invoice factor is a number that is caluleted reading milions of SMF
recods. Why don't you just keep this number in your product DB ad let your
customer enter this once a month?
ITschak
On Thu, Jul 29, 2010 at 2:38 PM, Dr. Stephen Fedtke
max_mainframe_...@fedtke.com wrote:
hi all,
we
.
Cheers, Paul Gillis
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Itschak Mugzach
Sent: Thursday, 29 July 2010 9:49 PM
To: IBM-MAIN@bama.ua.edu
Subject: ***SPAM*** Re: easy access to the current cpu-peak-time status
I don't think IBM allows competitors the duplicate mainframe hardware. The
company was built from the fact (and see those companies that didn;t
survive) that it left room for software vendors (and hardware manufactures)
to compete with and to win software (operating system) and software. at a
Arie,
Thanks. We knew it can be done and so tells the HMC help screen. We will try
to ipl next week from a DVD after changing to Single Object Operation (so
far, we tried without it) and report here. It seems not well documented in
the HMC user guide.
Paul,
The load program is stored in the HMC
to
the code to load.
It look like you nbeed to be in a Single Operation Mode in order to use this
function.
ITschak
On Wed, Jul 21, 2010 at 4:05 PM, Alan Altmark alan_altm...@us.ibm.comwrote:
On Tue, 20 Jul 2010 12:21:49 +0300, Itschak Mugzach imugz...@gmail.com
wrote:
During z/Linux
During z/Linux installation it is possible to use the HMC's DVD drive as a
tape drive. I wonder is DSS S/A can be started (Loaded) from same device and
not from a IOCP defined device.
ITschak
--
For IBM-MAIN subscribe / signoff
Radoslaw,
I wonder what your advise was. I am looking for an answer to what you
defined as another question.
ITschak
On Tue, Jul 20, 2010 at 2:36 PM, R.S. r.skoru...@bremultibank.com.plwrote:
Itschak Mugzach pisze:
During z/Linux installation it is possible to use the HMC's DVD drive
Just to remind Timothy that IBM is not the only software supplier, 3rd
parties and even IBM OTC does not take into account (at least, most of them)
usage metrics. So, my point is total capacity does influence TCO.
ITschak
On Fri, Jul 16, 2010 at 10:56 AM, Timothy Sipples
OK, boys. let return to Cobol vs Java, with and without zAAP. THe issue is
TCO, but performance uber ales!
Itschak
On Fri, Jul 16, 2010 at 8:01 PM, Ted MacNEIL eamacn...@yahoo.ca wrote:
And software licensing charges better not be the sole criterion for your
business's success or failure,
I wonder if this was tested ever: same business logic in batch or CICS. NO\o
zAAP installed. Who is faster? and in case of zAAP?
Itschak
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
Funny. This is not a 100 m run between an 40+ Cobol programmer and a young
Java prog.
ITschak
On Thu, Jul 15, 2010 at 9:58 PM, Kirk Wolf k...@dovetail.com wrote:
The better programmer.
On Thu, Jul 15, 2010 at 1:22 PM, Itschak Mugzach imugz...@gmail.com
wrote:
I wonder if this was tested
As expected, I believe. But did the second run was faster as the JVM was
loaded? What is the ratio?
On Thu, Jul 15, 2010 at 9:59 PM, Chase, John jch...@ussco.com wrote:
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of Itschak Mugzach
I wonder
And Kirk, you are THE java technolgy here. Protect your case...
On Thu, Jul 15, 2010 at 10:02 PM, Itschak Mugzach imugz...@gmail.comwrote:
As expected, I believe. But did the second run was faster as the JVM was
loaded? What is the ratio?
On Thu, Jul 15, 2010 at 9:59 PM, Chase, John jch
using zAAP? it will not speed up or consume less cpu
then a CP, the only advantage over CP is that it is not counted in CPU usage
reports (YET).
ITschak
On Thu, Jul 15, 2010 at 10:20 PM, Kirk Wolf k...@dovetail.com wrote:
On Thu, Jul 15, 2010 at 2:03 PM, Itschak Mugzach imugz...@gmail.com
wrote
Google on that and find my sample of an ispf batch rexx interface. It
might save you some coding.
Itschak
On Mon, Jul 12, 2010 at 6:37 PM, Clark, Kevin kevin.cl...@bcbsde.comwrote:
Ok...thanks all...I'll off an coding now
-Original Message-
From: IBM Mainframe Discussion List
Walt is correct on this. The serialization function should be implemented in
system code and currently it is not. I wonder if there is a third party
product that intercept the allocation/Open types and serialize on
directories and files.
ITschak
On Sun, Jul 4, 2010 at 4:54 PM, Walt Farrell
You may also look at EventAction.It does more then just member usage audit,
but I believe it will cost less them 6M ;-)
ITschak
On Fri, Jul 2, 2010 at 11:37 PM, George Henke gahe...@gmail.com wrote:
There are also ACF2 cleanup packages (CA) which help cleanup old rules. It
may have some
I am looking for a product that will serialize access to file (like the
Enqueue/Dequeue in GRS) in Unix systems. Does this animal exist?
ITschak
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
Hi Arie,
Interesting Issue. I suppose that service is given by a kind of transaction
manager like CICS as you mentioned avoiding disruption. Assuming that the
updates are stored in PDS(as loadmods), how can you ensure that the datasets
are positioned on disk exactly as mapped at time the dataset
On Wed, Jun 16, 2010 at 9:47 AM, Timothy Sipples timothy.sipp...@us.ibm.com
wrote:
Itschak Mugzach writes:
And you have Camouflage (datamasking.com) , 1st on Gartner and forrester.
Maybe. Camouflage is very late to the z/OS party (but much better late than
never, of course):
http
True, and if you use encryption device, like an accelerator, the overhead is
minimal as well...
ITschak
On Thu, Jun 17, 2010 at 5:01 AM, Phil Smith p...@voltage.com wrote:
Itschak Mugzach wrote:
They might entered late on z/os, but they are pure Java: No CPU cost if
you
have zAAP, so
And you have Camouflage (datamasking.com) , 1st on Gartner and forrester.
ITschak
On Tue, Jun 15, 2010 at 8:28 PM, Phil Smith p...@voltage.com wrote:
Alan Brown wrote:
IBM Optim can privatize production data for a test environment while
maintaining your application referential integrity. It
If you can 'push' the sysout to a windows server (FTP?), you may want to
have a look at http://smartprinter.co.il/en/smartprinter.html a cheap and
work maker solution.
ITschak
On Wed, Jun 2, 2010 at 3:52 PM, Barkow, Eileen ebar...@doitt.nyc.govwrote:
We use VPS/TCPIP and I do not see why it
Or.. rty //ANYDD DD DUMMY,DSN=HLQPARM..A
On Tue, May 11, 2010 at 7:06 PM, Mike Kovach mrmach...@yahoo.com wrote:
Thanks for the answer. I must have been having a
I love this forum.
Thanks for the answer. I must have been having a brain block.
Mike Kovach
There is also a job offering section in zJournal. Good luck find your next
job.
ITschak
On Mon, May 3, 2010 at 7:29 PM, Ron Hawkins
ron.hawkins1...@sbcglobal.netwrote:
Scott,
Did you have a look at the hardware and software vendor sites? Try
Interesting. If Cobol would be a problem, I would expect most of IBM
mainframe shops to develop new applications in (so called) modern languages.
I don't see it here in Israel. Most of the new code is still developed in
Cobol, Natural and some PL/I. farther more, if you are a mainframe centric
1 - 100 of 388 matches
Mail list logo