I am an idiot..because the code has a little comment at the
top.REXX!
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
it is not liking the syntax of that first command."invalid expression"
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
In a clist, how would I strip the first character from a system symbolic and
create a variable ending in that character? For example, "ABC&CHARACTER"
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email t
When applying maintenance several sysmod hold data will say to rerun the
install clist in order to get jcl updates, etc and to regenerate the jobs.
Should we run through it specifying "install" or "migrate" in order to get all
jobs regenerated?
There really isnt an option in the clist for "mainte
finally found out that I had a zparm accumuid set to 1 once I changed it to 0
the data started showing up.
Bill
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the me
It appears that these 2 fields, ENDUSERWN and ENDUSERWN_L in BMC (QWHCEUWN and
QWHCEUWN_Var in SMF) are blank for all records from 2 of our LPARS for all DB2
members on those LPARS.
The fields are populated from a third LPAR for all DB2 members on that LPAR.
I have not found any differences in th
When I order maintenance from Shopz there is the option to eliminate superseded
service. should this be normally selected?
thanks
Bill
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@list
running an apply check and getting the following on several sysmods:
GIM30206E ** APPLY PROCESSING FAILED FOR SYSMOD UI76575. HOLD REASON IDS WERE
NOT RESOLVED
What would the proper next steps be? Look into each sysmod for the hold reason
or exclude these sysmods?
Bill
-
Listserv
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
stupid question.when replying how do I leave the original message?
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
I need a large list of datasets by HLQ and space allocations as a report for
management before they are removed.
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with t
I dont get a "RECALL" panel it just goes to a DFSMSHSM tso prompt with static
messages
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
No, we are very tight on DASD space.
I am trying to get a list with a HLQ of datasets with their space allocations
to find large candidates to delete
Bill
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send em
that is under our storage teams controlbeen waiting
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
unfortunately, I have not done an accept yet.
the dataset is migrated and when I try to recall it I get the following:
IGD17288I DATA SET OEMPP.DB2.V12R02M0.SMPPTS
COULD NOT BE ALLOCATED NORMALLY AND IS NOT ELIGIBLE
FOR SPACE CONSTRAINT RELIEF (MULTI VOLUME) BECAU
How might I run an IDCAMS LISTCAT to get just the space allocations? Should I
use a different utility?
thanks
Bill
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the
we are having an issue recalling a migrated SMPPTS dataset. if all my past
maintenance is already received can I just delete and reallocate my SMPPTS
datasets?
Thanks
Bill
--
For IBM-MAIN subscribe / signoff / archive access ins
the product we have is the BMC reporting tool. I am trying to determine if it
is reporting correctly and what the SMF source actually contains
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists
We have some BMC data fields that are populated from SMF DB2 records and some
fields are coming up blank. How can I read out the SMF record fields to see if
the SMF fields are blank also?
One of the fields is QWHCEUWN
thanks
Bill
--
I am trying to modify old hand-me-down ISPF panel and clists.
Honestly I am not sure if some of this code is rexx or clists.
how might I tell?
thanks
Bill
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send ema
How do you pass a variable from one clist to another and then use that variable
as a node in a dataset name, i.e, PROD."ssid".SDSNLOAD ?
thanks
Bill
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
When getting maintenance, normally I sign onto Shopz, and order the latest
maintenance, download it and receive it.
Is there a automated way to receive maintenance through a regularly scheduled
batch job?
thanks
Bill
--
For IBM-
thank you for the information!
in order to change a system symbolic I would execute a "setload" command?
if so that would involve replacing the whole parmlib member and also authority
to edit the parmlib dataset?
Bill
--
For IBM-
we have system symbols specific to our area's software and products (DB2).
what authority do I need in order to update and change "my" system symbols?
thanks
Bill
--
For IBM-MAIN subscribe / signoff / archive access instructions,
how might I display or report how an alias is defined?
I am trying to determine is a system symbol was used to create the alias and
"resolve" the name i.e.
ALIAS "*.RTE.LINK" points to "*.RTE2104.LINK"
but I want to make sure it was defined with "*.RTE$SYMBOL..LINK"
thanks
Bill
-
I have received and applied several months maintenance, but have not yet moved
it into our runtime libraries. How might I determine what my prior RSU level is
within my runtime libraries?
thanks
Bill
--
For IBM-MAIN subscribe /
I am trying to get a dump for IBM with the following commands:
dump comm=( DUMP)
r ##,jobname=(dt11mstr,dt11dbm1,dt11irlm,dt11dist,omvs),cont
r ##,sdata=(rgn,csa,lsqa,sqa,psa,swa,lpa,trt,grsq,sum,allnuc),end
it keeps saying "IEE711I SYSTEM DUMP NOT TAKEN. ANOTHER DUMP WAS IN PROGRESS"
I thou
we have a job that keeps abending in an application program that the developer
insists is a "system" issue. what does a U 4087 abend indicate?
thanks
Bill
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send em
Our network security group (with no mainframe knowledge) is complaining about
the use of telnet for mainframe connections as they say it is not encrypted. We
use attachmate and HOD. Are there any 3270 emulators that also do encryption?
thanks
Bill
We have IOF and it seems the jes spool is filled preventing logon.
Is there a way I can purge a specific job's output with a route command from
another LPAR?
thanks
Bill
--
For IBM-MAIN subscribe / signoff / archive access instru
so how do I code it? ProxyCommand? ProxyJump? -X connect -x?
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
How do specify a proxy server in JCL for SFTP executing BPXBATCH?
thanks
Bill
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Thank you for the replies!
Yes, SMPe "recovered" from the E37-04.
It spilled over to SMPPTS1 then in turn spilled over to SMPPTS2.
so it seems all good
thanks!
Bill
--
For IBM-MAIN subscribe / signoff / archive access instructions
I ran a SMPe receive and got a CC 0. Assuming all was ok I went on to the
Apply. When I looked back at the receive job I now noticed it got a E37-04 on
the SMPPTS1 dataset.
Now I am not sure all the PTFs were loaded into SMPPTS1.
Should I rerun the receive making sure I address the E37 issue?
tha
We use BMC Mainview for z/OS, CICS, DB2 and Performance Reporter for DB2. These
related but separate products that BMC put under one SMPe FMID.
The issue we have is that one person does the z/os, cics part and I do the DB2
part. And this causes us to step on each other in terms of maintenance. Wh
isnt -refresh only for early code and not DSNHDECP?
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Is it at all possible to reload DSNHDECP after changing and reassembling it?
thanks
Bill
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
we use the product File - Aid for Data Masking. A user is trying to connect
remotely and is getting an error CEE0374C CONDITION=CEE3250. The vendor wants
us to use amode 31. I have no idea where that is either specified or setup.
Can anyone advise me?
thanks
Bill
What JCL checkers are normally available?
TYPRUN=SCAN requires actual submission of the job. I want to check syntax and
datasets
thanks
Bill
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists..
SET BDY(TARGET).
LIST PTFS
FORFMID(HTCZ110).
SET BDY(DLIB).
LIST PTFS
FORFMID(HTCZ110).
For running the mepl can that be run against the Query monitor load and NOT the
DB2 DSNLOAD?
thanks
Bill
--
For IBM-MAIN
Hi Chris,
thanks for your help!
Its the SMPe CSI I am concerned with not the actual load library.
Bill
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INF
I have a SMPe CSI that shows products installed (5655-TC1 fmid HTCZ110) and
(5655-V42 fmid HCQC110). IBM Tools Customizer and IBM Query Monitor for DB2.
Yet when I try to run a report of sysmods in either my target or DLIB it show
no sysmods found. How do I remedy this? Do I reorder the products
Hello,
We are trying to debug old MQ code.
Can anyone point to some places to get MQ information? Is there a "IBM-Main"
for MQ?
We need to find the equivalent of the SQLCA area "Bind" command and a
programming guide..
thanks
Bill
--
We had a new CSI setup for us by a managed service company. it appears one of
the underlying products was not applied correctly. This is IBM Tools Customizer
for z/OS FMID HTCZ110. This product is then in turn used to install and
configure Db2 Query Monitor and High Performance Unload for DB2 wh
how do I display and change the system symbolic for the alias "suffix" (.A .B)?
thanks
Bill
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
We are in the middle of our DB2 v12 upgrade. And we have a bit of a mess with
our runtime libraries. We have aliases (.A .B) for our DSNLOADs and DSNEXITs.
But for all the other runtime libraries, SDSNCLST, SDSNDBRM, etc have no
aliases. Shouldnt the aliases be for all runtime libraries? If we f
Might anyone be able to point me to an example of a BATCH JCL Job that can
submit CA OPSMVS commands to shutdown and start up tasks, like CICS regions?
thanks
Bill
--
For IBM-MAIN subscribe / signoff / archive access instructions
we are being constrained due to operations limitations. We are planning to
upgrade our development environment and we need to have the development CICS
regions down. Unfortunately operations says they have difficulty going thru all
the regions and just stopping development cics. Our CICS regions
no I simply want to start DB2 Member1 on LPAR2.
Bill
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Thank you for the information!
I think I was a little vague.
Let me explain further...
we have on LPAR1 DB2 Member1, on LPAR2 DB2 Member2. Both members of the same
data sharing group.
I want to be able to start DB2 Member1 on LPAR2 and DB2 Member2 on LPAR1.
thanks
Bill
---
We have DB2 data sharing and I have a need to start DB2 members on any LPAR.
Aside from RACF definitions, is the only other item I need in place is the SSID
symbol in SYS1.PARMLIB(IEFSSNxx) ?
thanks
Bill
--
For IBM-MAIN subscribe
the restore and message was:
RESTORE INDD(TAPE80)-
DS(INCL(SYS2.DB2X.DSNLOAD.A)) -
REPLACE
ADR101I (R/I)-RI01 (01), TA
I think my issue was that my control specification did not capture all the
datasets I needed. I have now modified it with masks as follows and it seems to
capture all the datasets I need now:
DUMP OUTDD(TAPE80) -
I am preparing for a DB2 v12 upgrade. I need to backup and restore form (if
necessary) the "runtime libraries". What utilities are normally used? I have
been having issues with DFSMS ADRDSSU. My restores failed. Also having issues
with EMCSNAP as I am not familiar with it.
thanks
Bill
can anyone provide JCL to tar a USS directory?
thanks
Bill
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
how do I tell that?
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
yes, its in SYS1.LINKLIB.
Bill
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
When I try to turn off dump suppression in IPCS / DAE I get the following:
586 *-*Address TSO "ADYOPCMD 1" /* Stop DAE @01A*/
+++ RC(-71) +++
---
when I enter "T" I get the following:
ADYOPCMD failed to stop DAE processing. Return Code=-71
Bill
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IB
I have a dump that is being suppressed by DAE. I am not experienced with IPCS
and DAE. How do I find out what dataset is being used by DAE and how do I
"remove" the dump in order to get the dump?
I hope that makes sense.
thanks
Bill
---
We have software at 2 different maintenance levels, with separate CSIs and
zones.
Is there a report I can run to compare the maintenance levels and get the
holddata needed for the "higher level" maintenance?
I hope my question makes sense.
thanks
Bill
We decommissioned IMS a couple of years back. We now find that an application
is still using an IMS module, DVRX. Can someone tell me what this module
does? Is seems, from a google search, it is some type of old IMS DPROP module.
thanks
Bill
--
Yes, I am aware of the DB2 ERLY REFRESH command. but that authority has been
taken away thru a third party too MZCA (long story)…..it will take time to get
it back. In any case, due to limited size I need to reallocate my old SDSNLINK
datasets.
Bill
-
Thank you for the help and information!
So "Stop VLF" will "bring down" XCFAS?
thanks
Bill
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
I have been having an issue getting DB2 ERLY code dataset (SDSNLINK) moved in.
The PARMLIB has been updated for me and I only need to rename my SDSNLINK
datasets to match PARMLIB. But I keep running into XCFAS "using" the dataset. I
am not able to "bring down" XCFAS. How do I tell what LPAR is a
thank you for the information!
So you have to "redefine" the policy?
thanks
Bill
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
how do I increase the initsize on a coupling facility structure from 5m to 7m?
thanks
Bill
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
I have a sourceid in a global zone that doesnt show up in the target zone. When
I run an apply it fails with :
APPLY
PTFS
APARS
I added a command "syscalls('ON')" and it now worked fine..
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
I am trying to run obtain maintenance from BMC thru an ISR (Internet Service
Retrieval) and it is failing on a rexx command for USS "address syscall ".
BMC has said that the "SYSCALL" environment is not available on my system. What
is the "SYSCALL" environment and how might I get it available
thank you for the info! Sorry stupid question, run that as an instream proc?
thanks
Bill
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
is there a batch job equivalent of ISPF =3.4 dataset list? I want to get a
total (or at least a list of) tracks for a dataset list.
thanks
Bill
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to list
I need to move in new DB2 ERLY code. My question is, can I copy in the ERLY
while DB2 is up. Then after a normally scheduled IPL start DB2? Or does DB2
need to be down in order to copy in the new ERLY code?
thanks
Bill
--
For IB
If I want to know if a given PTF is applied to a specific module, such as
UI69028, but I see UI70029. Does that mean prior PTFs are included?
thanks
Bill
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send ema
When I order software maintenance and download it, why does it need to go to
USS first?
thanks
Bill
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO
I have applied a round of maintenance a few months back but havent moved it
into our "run time libraries" yet. Is there a way to run a SMPe report and get
the HOLDDATA from that previous APPLY?
thanks
Bill
--
For IBM-MAIN subscr
thank you all for your help and information.
I was able to get by the error by allocating a larger uss mountpoint.
thanks
Bill
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.e
I have a component, DB2 Query Monitor, that I need to apply PTFs to. I have
found 2 CSIs. How do I determine which CSI was used for the currently running
"Run Time Libraries"?
thanks
Bill
--
For IBM-MAIN subscribe / signoff / ar
Top of Data **
ICH70001I HDBSWXG LAST ACCESS AT 08:20:47 ON TUESDAY, AUGUST 18, 2020
IEFA111I HDBSWXG1 IS USING THE FOLLOWING JOB RELATED SETTINGS:
SWA=BELOW,TIOT SIZE=64K,DSENQSHR=DISALLOW,GDGBIAS=
I have been trying to unzip a USS file and I keep getting the following:
GIM68200E ** PROCESSING FAILED FOR THE /bin/pax UNIX SYSTEM SERVICE COMMAND.
GIM47800S ** AN ERROR OCCURRED WHILE GIMUNZIP WAS PROCESSING ARCHIVE
Is this pointing to lack of space in my USS file system?
How do I resolve
thanks you your help here!
so it seems to me you should have one CSI or target/dlib zone to match what is
LIVE in production. then if you need a "one-off" ptf...aplly it there for
implementation into your run time libraries.
thanks
Bill
---
I have run an apply for an RSU level for DB2 base. But now I need to implement
(move into my run time libraries) one module /PTF without the rest of the
maintenance for that RSU level. Can I move in individual modules? or does the
RSU level maintenance need to go in as a whole?
I hope my questio
Hi Lizette,
What command do use to set up FMIDSETs?
thanks
Bill
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
so I need to reorder it all over again?
thanks
Bill
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
So I had a CSI setup and provided for by someone else. As I am going thru it it
seems there are FMIDs for a couple of products missing:
DB2 BASE Z/OS
HDREC10 DB2 RACF EXIT Z/OS
HIYCC10 DB2 IMS ATTACH Z/OS
HIZCC10 DB2 SUBSYS INIT Z/OS
JDBCC1Z DB2 12 VUE
JDBCC12 DB2 JDBC/SQLJ Z/OS
Db2 QMF for z/OS
yes this is a CBPDO order.
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
thank you for the help!
I found the job members in one of the RELFILES and can run the CQMALLOC
CQMALLO2 CQMDDDEF CQMDDDEF2 easy enough and then hopefully run a clean apply
check.
But I feel I am missing something here.
I cant run and apply until I run those jobs but the apply will populate those
In my receive job I can see the various jcl members I would need to run
CQMALLOC, CQMDDDEF, etc. These would be put in a SCQMSAMP pds. But I dont have
those PDSs defined yet.
Bill
--
For IBM-MAIN subscribe / signoff / archive ac
So I have another "rookie" mistake here.
I am ordering Db2 Query Monitor z/OS v3.
I ordered and ran the GIMSMP - Download, Unpack, Receive job which completed
successfully (CC 0).
Now I am trying to run the Apply Check and am failing on missing DDDEFs and
Datasets.
Where would I get the jcl t
I really appreciate everyone's help here!
The issue I had I believe was that I failed to specify FORFMID.
However, I need to take a step back and review my SMPe environment.
The CSI was handed off to me and I am finding some things wrong, like missing
FMIDs for some of my base products.
thank you
So this is for DB2 software. Distribution libraries are *.AD* Target libraries
are *.SD*. So I would create a second target zone a define datasets and DDDEFs
for say "*.target2.SD*" ?
--
For IBM-MAIN subscribe / signoff / archiv
I attached the apply check and the nonapply list
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
APPLY PTFS
BYPASS(
HOLDSYSTEM(ACTION,AO,DB2BIND,DEP,DOC,IPL,MULTSYS))
GROUPEXTEND CHECK .
--
For IBM-MAIN subscribe / signoff / archive access
GIM59603IENQ WAS SUCCESSFUL FOR SHARED USE OF OEMPP.DB2.V12R02M0.SMPPTS1 FOR
GIM59603IENQ WAS SUCCESSFUL FOR SHARED USE OF OEMPP.DB2.V12R02M0.SMPPTS2 FOR
GIM24801S ** NO SYSMODS SATISFIED THE OPERANDS SPECIFIED ON THE APPLY COMMAND.
GIM59606IDEQ WAS SUCCESSFUL FOR EXCLUSIVE USE OF OEM
I ran a GIMSUP download, unpack, receive which ran clean. I see the received
ptfs in a LIST NOAPPLY. But when I run theAPPLY I get "NO SYSMODS SATISFIED THE
OPERANDS SPECIFIED ON THE APPLY".
What could I be doing wrong?
thanks
Bill
So I've been reviewing the options you all have so kindly shares zonecopy,
zonemerge, zoneexportand it seems obvious you need to be careful of the
DDDEFs and renaming of datasets. If not careful you can really screw up and
overlay one environment.
While simplistic and perhaps slightly more w
I want to setup separate SMPe environments, say 3 for different maintenance
levels. One matching production then 2 others for maintenance levels "coming
next". My question is, when I what to update my PROD environment with one of
the other maintenance levels, do I need to go thru receive, apply,
Can I point to a completely different directory? Or on the hand, how do I add
volumes to a mounted HFS file system?
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with th
I am running a CBPDO download from IBM. If I get past the download of all the
files, but fail during the "unpack step" due to a small smpwkdir; can I restart
pointing to a different smpwkdir resuming in the "unpack step"? Or do I have to
start from the beginning again?
thanks
Bill
-
I think to most here the argument against mainframes from a technical point of
view is wrong. But I wondering if another aspect has to be looked at. That is
IBM's sales, licensing and promotion of their technology. I realize all this
is old news. But lack of promotion (compared to other compani
101 - 200 of 262 matches
Mail list logo