On Thu, 12 Sep 2013 07:35:20 -0400 Shmuel Metz (Seymour J.)
shmuel+...@patriot.net wrote:
:In 5mr239lukvqm4q0ijvvv6f2o1tp2cul...@4ax.com, on 09/12/2013
: at 10:39 AM, Binyamin Dissen bdis...@dissensoftware.com said:
:As Jim pointed out, obviously the other processor cannot free these
:areas
anyone here know if there any such information available through LE
services? Is there any way at all to get such information short of in-program
call counters reported at EOJ by the programs themselves?
:
:Peter
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
nowadays), the count of LOADs and DELETEs would
be a futile waste of time.
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me,
you should preauthorize
that you were enabled for both interrupt types before
:the STNSM.
:
:Indeed.
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me,
you should preauthorize
, who will likely get caught, fired, and maybe
:indicted.
Don't pretend that it is super sekrit.
Any SYSPROG that writes code (other than a SMP jockey) knows how to do it.
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
On Tue, 10 Sep 2013 04:01:24 -0400 Arthur T. ibmm...@intergate.com wrote:
:On 10 Sep 2013 00:08:02 -0700, in bit.listserv.ibm-main
:(Message-ID:r7ht291houi25hhl5lu4j2s78horr9r...@4ax.com)
:bdis...@dissensoftware.com (Binyamin Dissen) wrote:
:Don't pretend that it is super sekrit.
:Any SYSPROG
, but I vaguely remember somebody told me it was obsoleted
with advent of MVS.
:
:--
:Radoslaw Skorupka
:Lodz, Poland
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect
:
: --
: For IBM-MAIN subscribe / signoff / archive access instructions,
: send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
:
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director
,
:send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me,
you should preauthorize
)
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me,
you should preauthorize the dissensoftware.com domain.
I very rarely bother responding to challenge
()
VIRTUAL31()
REUSASID(NO)
AUTOIPL SADMP(NONE) MVS(NONE)
Why would this not hit for initiated jobs?
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director
(NO)
: AUTOIPL SADMP(NONE) MVS(NONE)
:
: Why would this not hit for initiated jobs?
:
: Since you have not specified an ASID or JOBNAME
:filter, the GFS trace should apply to all address
:spaces. What evidence is suggesting that initiated
:jobs are being excluded from tracing?
--
Binyamin
-MAIN
:
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me,
you should preauthorize the dissensoftware.com domain.
I very rarely bother responding
for benchmarks.
Of course, there may be 3 different engines
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me,
you should preauthorize
/ signoff / archive access instructions,
:send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me
of CSVDYLPA, its not really LPA, its
more Common storage.
:So my question is - Should I be able to invoke a Dynamically Added Module as
a Non Space Switching PC Routine.
Common storage is commonly addressable, so it is the same as LPA in this
respect.
--
Binyamin Dissen bdis
is if it
could be done from within the SORT utility (as the driver) because of its
ubiquity, but I could not figure out whether and how it could be done.
Use a utility (IEBPTPCH, for one) that will dump the PDS into a flat file.
--
Binyamin Dissen bdis...@dissensoftware.com
http
have a CEEDUMP but that's not real
helpful in diagnosing the issue. I looked a setting a slip with a trace but
don't think that will do any good to get to the problem record.
Why can't you find it? Look at which instruction is getting the 0C7 and see
how that field is populated.
--
Binyamin
to
allow fetch w/o key zero. That actual page is currently key0 fetch protected.
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me,
you should preauthorize
...@austin.rr.com said:
:
:TMI2REC+ISTAT-IREC,SDLET
:
:Is equivalent to:
:
:LA somereg,I2REC somereg is R1-R15
:USING IREC,somereg
:TM ISTAT,SDLET
:DROP somereg
:
:No it isn't.
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen
:Rocket Software
:
:--
:For IBM-MAIN subscribe / signoff / archive access instructions,
:send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
--
Binyamin Dissen bdis...@dissensoftware.com
http
Can't find it in data areas either
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me,
you should preauthorize the dissensoftware.com domain.
I very
to do so
:and will be crestfallen that SAS has been able to do so (for so
:long). I think he wrote the code in the late 1970's.
Wouldn't a simple ERROPT do the job?
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
On Wed, 29 May 2013 22:22:33 -0400 Micheal Butz michealb...@optonline.net
wrote:
: Running a program under TSO TEST
:I got the above abend after a BSAM READ. Would anyone know what this is about
What did you understand from looking up the abend in SYSTEM CODES?
--
Binyamin Dissen bdis
On Thu, 30 May 2013 19:12:54 -0400 Micheal Butz michealb...@optonline.net
wrote:
:Would anyone have examples of
:Getbuf used with BSAM read
:I think it might help my problem
I wonder what difficulty you have with GETBUF - it only has two parameters.
--
Binyamin Dissen bdis
that remembering, and TCBPKF need not match the key
:just prior to the MODESET KEY=ZERO.
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me,
you should preauthorize
.
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me,
you should preauthorize the dissensoftware.com domain.
I very rarely bother responding to challenge
is an all but infallible indicator of
:sanctimony mixed with sloth.
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me,
you should preauthorize
Is there such a product, where the application does
EXEC SQL
and it is converted into an IMS call?
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response
On Thu, 16 May 2013 07:27:11 -0500 Tom Marchant m42tom-ibmm...@yahoo.com
wrote:
:On Thu, 16 May 2013 09:36:55 +0300, Binyamin Dissen wrote:
:While questionably STCKE will be better than STCK (depending on the use), the
:correct solution is to use some kind of unbiased value with an optional
at an FRB for a standard SQL.
:Regards,
:Boris
:On Thu, May 16, 2013 12:27, Binyamin Dissen wrote:
: Is there such a product, where the application does
: EXEC SQL
: and it is converted into an IMS call?
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
searched ibm.com and SHARE proceedings also and came up empty.
A DB2 client cannot use a reusable ASID as DB2 does not use the (I) forms.
Perhaps DB2 itself can run with it - don't know.
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me,
you should preauthorize the dissensoftware.com domain.
I very rarely bother responding to challenge/response
I am trying to compare two dumps, a before and after.
I am noticing a difference on all records at column 29 (for four bytes) after
the address of the record. What is it?
Where is the layout?
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software
for the installation.
Of course, there is the ancient technique of anchoring the SITECVT address in
CVTUSER. Faster than ECVTCTBL.
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package
...@listserv.ua.edu with the message: INFO IBM-MAIN
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me,
you should preauthorize the dissensoftware.com domain.
I very
:
:--
:For IBM-MAIN subscribe / signoff / archive access instructions,
:send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use
/ archive access instructions,
:send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me
I didn't see an obvious way to format the linkage stack for an SRB. Neither
SUMM FORMAT nor 2.2 did the job.
Eventually I browsed the storage using CR15.
What did I mess?
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
I would like to reproduce a problem.
How can I force IMS to do an OLDS purge?
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me,
you should preauthorize
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me,
you should preauthorize the dissensoftware.com domain.
I very rarely bother responding to challenge
,LIST=YES
:
:
:Thanks anyway
:
:
:On 02/20/2013 02:25 PM, Binyamin Dissen wrote:
: CVT DSECT=YES,LIST=YES
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect
...@listserv.ua.edu with the message: INFO IBM-MAIN
:
:--
:For IBM-MAIN subscribe / signoff / archive access instructions,
:send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
--
Binyamin Dissen bdis
email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
:
:--
:For IBM-MAIN subscribe / signoff / archive access instructions,
:send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
--
Binyamin Dissen
:---
:
:--
:For IBM-MAIN subscribe / signoff / archive access instructions,
:send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill
Have gotten this from customer dumps:
BLS18224I Dump of z/OS 01.13.00-0 - level differs from IPCS level
BLS21001I IPCS for z/OS 01.13.00-1
Are there a separate Z/os 01.13.00-0 and 01.13.00-1 miglibs?
What structurally changed that would affect IPCS?
--
Binyamin Dissen bdis
Or does it affect the entire system?
Does the job issuing the SRM call get suspended?
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me,
you should
PACKTYPE=PACK
RECFM=FIXED
** AMA573I TERSE COMPLETE DECODE UNPACK 01:28:13 12/19/2012
** AMA504I RETURN CODE: 0
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software
code 0?
:
:
:
:On Tue, Dec 18, 2012 at 10:51 AM, Binyamin Dissen
:bdis...@dissensoftware.com wrote:
:
: I am only getting part of the first record of the dump
:
: DR2 H ..Á.@IEAVTSDT
18:51, Binyamin Dissen wrote:
: I am only getting part of the first record of the dump
:
: DR2 H ..Á.@IEAVTSDT
: CDF4C40056F7CCCEEECEC
subscribe / signoff / archive access instructions,
:send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect
will keep you informed if I learn more on this
issue.
:
:--
:For IBM-MAIN subscribe / signoff / archive access instructions,
:send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
--
Binyamin Dissen bdis
/ archive access instructions,
:send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me,
you
on.
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me,
you should preauthorize the dissensoftware.com domain.
I very rarely bother responding to challenge
-the-bar beyond mere 64-bit savvy of the users.
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me,
you should preauthorize the dissensoftware.com domain.
I
, so you don't have to have a 1-to-1 correspondence between DCB's and
DCBE's.
:Really? You can share a DCBE among several DCBs? I'm skeptical. Where is that
:documented?
The opposite is documented - open sets DCBEDCB - DCB. No way to have the DCBE
point to multiple DCBs.
--
Binyamin Dissen bdis
that the
:storage I obtain for the resmgr exit to run should have an
:Alet pointing to master
:
SP=227 is common, so it will work perfectly fine.
Show your code.
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use
the RESMGR return code?
:On Nov 19, 2012, at 4:01 AM, Binyamin Dissen bdis...@dissensoftware.com
wrote:
: On Sun, 18 Nov 2012 21:10:01 -0500 Micheal Butz michealb...@optonline.net
: wrote:
: :I have RESMGR exit for a asid other than my own the code is running from
: :sp=227,LOC=31 but doesn't seem
?
:
:--
:For IBM-MAIN subscribe / signoff / archive access instructions,
:send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
)?
If no FRR, and the SRB was not scheduled with SRB to task percolation, it
silently vanishes.
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me,
you should
, next convert again from text to XML and resend
this.
What do you expect the TEXT file to look like?
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me
On Thu, 1 Nov 2012 20:23:46 -0400 Leslie Turriff jlturr...@centurytel.net
wrote:
:On Thursday 01 November 2012 08:09:00 Binyamin Dissen wrote:
: Such as displaying the devices that went offline during IPL because they
: had duplicate serials.
: Which OS?
z/OS 1.13
--
Binyamin Dissen bdis
Such as displaying the devices that went offline during IPL because they had
duplicate serials.
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me,
you
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me,
you should preauthorize the dissensoftware.com domain.
I very rarely bother responding to challenge/response
:name.
At SLIP entry R3 points to the major message and R5 to the minor message. So
you can use a DATA qualifier for specific columns in the message.
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use
,
: send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
:
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me,
you should preauthorize
?
:Anyone have a nice formula? :-)
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me,
you should preauthorize the dissensoftware.com domain.
I very rarely bother
what is the correct
technique in this situation. I have a dim memory that OPEN TYPE=J is useful but
would be grateful for any suggestions.
Read the HDR1 label. Or ask your friendly tape subsystem.
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen
an SVC 3 in such a case will terminate the caller as
well.
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me,
you should preauthorize the dissensoftware.com
(poskeywd)
:
:Thanks in advance
:
:
:
:
:
:Sent from my iPhone
:
:On Sep 24, 2012, at 3:43 AM, Binyamin Dissen bdis...@dissensoftware.com
wrote:
:
: On Sun, 23 Sep 2012 21:28:35 -0400 micheal butz michealb...@optonline.net
: wrote:
:
: :I am writting a TSO command processor which I invoke IKJPARS
by the programs on
other CPUs) unless you use some kind of semaphore or lock.
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me,
you should preauthorize
cobbled together some code and could not figure out why the
immediate 0C4)
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me,
you should preauthorize
to ISPF with an incompatible terminal
:type chaos ensues. Dumb ISPF.
I do not understand why you consider the preempt as extreme. It seems
perfectly reasonable.
What I do not like is the USER IN USE even when reconnect is specified
(fixed at 1.11 or so)
--
Binyamin Dissen bdis
point us to the line number in the SYS1.MACLIB(IARCP64)
member that contains the documentation?
You may see it when he bends over.
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package
:mentioned
:apply, then the additional information is stored.
What exactly are the conditions that the FRRPARM is not zeros when the code
described by the SRB is executed?
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
passing control to the client SRB?
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me,
you should preauthorize the dissensoftware.com domain.
I very rarely
the FRR logic its 'context'.
: Is there a way to pass the FRR a parm when it is created by IEAMSCHD?
I do not believe so.
But your recovery routine, if truly critical, needs to be able to handle the
abend before the FRRPARM is set. The area is documented to be initialized to
zero.
--
Binyamin
it for OUTPUT) with DISP=MOD
and secondary space allocation with a new member name. The works with
sequential, probably with PDS as well.
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package
NILL? check. OILL? check. XILL? not present
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me,
you should preauthorize the dissensoftware.com domain.
I
On Tue, 24 Jul 2012 10:16:27 -0500 Paul Gilmartin paulgboul...@aim.com
wrote:
:On Tue, 24 Jul 2012 10:05:00 +0300, Binyamin Dissen wrote:
::Why have such a special list rather than merely verifying that the program
::resides in an APF authorized library and was linked with AC=1?
:Because
a program (no source), and trying to
: figure out what BDAM does when the READ macro
: is invoked without a BLKREF relative-block-address
: specified.
:
: This is an RBA-type BDAM, and I'm seeing a READ
: where the BLKREF in the DECB is simply X'0'.
:
:
:Binyamin Dissen asked:
:
:
:
: What is the second
I do trust the sender and apparently they cannot (easily?) send me it as a
PDF.
Neither Word2002(XP) nor Wordpad properly open it.
I unzipped it and tried sending the XMLs to IE and Firefox and they didn't do
anything.
Any ideas?
--
Binyamin Dissen bdis...@dissensoftware.com
http
to pick up the DD
information and the PARM passed to the subsystem.
Start with MVS Using the Subsystem Interface
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response
have the standard mapping macro no problem.
Security Server RACF Macros and Interfaces Chapter 5
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me,
you
.
Define complete.
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me,
you should preauthorize the dissensoftware.com domain.
I very rarely bother responding
dataset.
--
Binyamin Dissen bdis...@dissensoftware.com
http://www.dissensoftware.com
Director, Dissen Software, Bar Grill - Israel
Should you use the mailblocks package and expect a response from me,
you should preauthorize the dissensoftware.com domain.
I very rarely bother responding to challenge
901 - 986 of 986 matches
Mail list logo