a PDSE member when an out-of-space condition
has prevented a proper close and writing of all data blocks during the
member creation?
JC Ewing
On 10/23/20 9:03 AM, R.S. wrote:
Why do you assume there is/should be other abend than x37?
Any request for new place in the dataset could end
I just read the manual and didn't found any reference to dynamic
activation. Neither TSO PARMLIB nor other command.
So, it seems one has to bounce TSO address space in order to change
TSOKEYxx parameters.
--
Radoslaw Skorupka
Lodz, Poland
W dniu 25.10.2020 o 02:31, Joe Monk pisze:
Sam
Hint:
TSO member in PARMLIB usually has reference to WRONG TSOKEYxx.
That means the member is TSOKEYnn, but the library is CPAC.PARMLIB, AFAIK.
Check it.
Yes, it does not use logical parmlib, just DD.
--
Radoslaw Skorupka
Lodz, Poland
W dniu 25.10.2020 o 02:06, Sam Golob pisze:
Dear
members would be no different in effect from a mischievous programmer adding one
member of unbounded size.
Charles
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of R.S.
Sent: Thursday, October 22, 2020 7:29 AM
To: IBM-MAIN@LISTSERV.UA
W dniu 22.10.2020 o 15:12, Paul Gilmartin pisze:
On Thu, 22 Oct 2020 13:50:44 +0200, R.S. wrote:
Remark: while shortage of space is possible in PDSE, then shortage of
directory blocks is not possible.
What happens if an inquisitive programmer mischievously adds an
unbounded number of empty
Yes,
Data class is used for choosing tape parameters (MEDIAn, encryption, etc).
--
Radoslaw Skorupka
Lodz, Poland
W dniu 21.10.2020 o 01:08, Jackson, Rob pisze:
And yet it is for SMS-managed tape. Tape does not have SMS-managed datasets.
First Horizon Bank
Mainframe Technical Support
Remark: while shortage of space is possible in PDSE, then shortage of
directory blocks is not possible.
BTW: Correct me if I'm wrong, but I think PDSE on LNKLST *may have*
secondary extents and it is NOT bad practise like in case of PDS.
--
Radoslaw Skorupka
Lodz, Poland
W dniu
W dniu 20.10.2020 o 23:26, Pew, Curtis G pisze:
On Oct 20, 2020, at 3:00 PM, Jackson, Rob wrote:
Tape dataclass is on the volume level. You can use 'd sms,vol(vv)'.
That shows the storage group but not the dataclass.
I’m pretty sure DATACLAS, for both disk and tape, is used during ACS
W dniu 21.10.2020 o 19:10, Robert Hahne pisze:
Well, it is more or less similar.
The main advantage over "legacy" links is CHPID virtualization, that
means you may have several CHPIDs assigned to one physical link.
What is your problem? Do you have the fanout card installed? Is it cable
W dniu 21.10.2020 o 14:34, Robert Hahne pisze:
Greetings ,
Can someone direct me to a documentation for implementing ICA links on Z13 ? .
I was able to find a fantastic manual for implementing InfiniBand on system Z ,
but nothing similar to that for ICA . Are they similar in coding from an
(This is about * and other special names, not about PDS and LNKLST. )
There are two *valid* approaches:
1. Unix-like. Allow use of special characters in the names, but also
support a method to disable special treatment of the character. That's
why it is possible to use * as/in the filename,
W dniu 13.10.2020 o 19:28, Salva Carrasco pisze:
Well not 16, but we run 10-12 trans per real client every day.
Well, my knowledge from real life: 40-50 CICS transaction per customer
every day. Note: every customer, including those who haven't been
serviced for years or use services once a
W dniu 12.10.2020 o 17:23, Ed Jaffe pisze:
On 10/12/2020 8:15 AM, Clark Morris wrote:
I would be astounded if Microsoft was running any of their business
today on other than Microsoft operating systems or Linux on x86 and
ARM hardware.
Microsoft has an IBM mainframe running z/OS. One of
for iPhone
On Sunday, October 11, 2020, 12:26 PM, R.S.
wrote:
Patents are not pathetic. Other companies still make new patents.
Including those like Microsoft and Google.
Patents are still valid and important even if som
W dniu 11.10.2020 o 18:27, Bill Johnson pisze:
I agree. It wasn’t me who said they were pathetic.
Sent from Yahoo Mail for iPhone
On Sunday, October 11, 2020, 12:26 PM, R.S.
wrote:
Patents are not pathetic. Other companies still make new patents.
Including those like Microsoft and Google
Patents are not pathetic. Other companies still make new patents.
Including those like Microsoft and Google.
Patents are still valid and important even if some company have only few
of them or cannot make any.
--
Radoslaw Skorupka
Lodz, Poland
W dniu 11.10.2020 o 18:11, Bill Johnson
W dniu 11.10.2020 o 16:36, Robin Vowels pisze:
On 2020-10-12 00:57, Bill Johnson wrote:
So market cap is now the determining factor for the best companies?
Here’s the 1980 list of market cap leaders. Had IBM not been forced
out of the PC market, I’d bet IBM would still be at or near the top,
, R.S.
wrote:
To complement: AFAIK it is impossible to sign a contract with "full
responsibility" of such cloud provider.
In some cases it is required by govt regulators. I heard about fiasco of
migration to cloud project ju
W dniu 09.10.2020 o 04:25, zMan pisze:
Nope, IBM doesn't process 90% of credit card transactions. Most processors
are on distributed, with a lot of HPE NonStop in the mix, but also other
platforms.
Can you provide any source of this statement?
From my limited knowledge it seems NonStop is
To complement: AFAIK it is impossible to sign a contract with "full
responsibility" of such cloud provider.
In some cases it is required by govt regulators. I heard about fiasco of
migration to cloud project just because of that.
--
Radoslaw Skorupka
Lodz, Poland
W dniu 11.10.2020 o
I have a problem with Nexus 3270 emulator and Omegamon 5.5
Scenario:
LOGON APPLID=OMEG1
logon screen appears.
I type user, password, press ENTER
So far, so good. I see message like "What's new". Using TAB I put cursor
on NEXT button and and the screen is broken. Some lines from "ISPF-like"
W dniu 09.10.2020 o 15:16, Steve Beaver pisze:
One of the MAJOR reasons I hate PCOMM it that I have trouble setting up
CUT/PASTE as
CNTL-C and CNTL-V.
Are there any IBMers that can tell me how KEYBOARD map these functions.
The file is text and short:
[Profile]
ID=KMP
Version=5
This is one of major advantages of PCOMM: key mapping.
If you want, I can send you keyboard definition with Ctrl-C, Ctrl-V as
copy and paste.
--
Radoslaw Skorupka
Lodz, Poland
W dniu 09.10.2020 o 15:16, Steve Beaver pisze:
One of the MAJOR reasons I hate PCOMM it that I have trouble
W dniu 06.10.2020 o 13:39, Barbara Nitz pisze:
In either case, is possible to "functionally replace" IEASYS00 with other
members.
We have ieasys00 in our regular parmlib, overriding the IBM delivered one. All
our ieasys00 contains is CLPA, meaning that we always IPL with CLPA. All the
rest
You want something unnecessary and impossible. IEASYS00 has to be read.
But...
Why do you want 0B member?
a) you always choose 0B => just rename it to 00.
b) you want to have a choice (0B, AA, 04, 0C...)
In this case ...you have further choice:
b.1) you may create empty or "almost empty"
W dniu 05.10.2020 o 12:49, Joseph Winters pisze:
Hello,
We have a couple of 3490 tape cartridges that contain program libraries
(loadlibs) as well as source code. The contents contain a software product
that was last worked on in 2005. We would like to have the tapes converted to
a newer
I remember that printing BOO was the worst thing available. It was
acceptable when you wanted to print a page, but chapter was horribly
formated.
I always kept PDF collection as possible source to print the book.
And actually I still use last (z/OS 1.13) BOO collection. I use more
recent
W dniu 29.09.2020 o 05:33, Lizette Koehler pisze:
You need to be careful about copyrights and uploading to something other than
an IBM approved site.
Just saying.
Formally, yes. Really, not so.
I think all or vast majority of bitsavers content is copyrighted
material. But it is kind of
W dniu 29.09.2020 o 00:54, Robert Prins pisze:
Just had a look at
https://www-01.ibm.com/servers/resourcelink/svc00100.nsf/pages/zosv2r4sa380683/$file/ceea300_v2r4.pdf?OpenElement
to find a country code that gives me dates in ISO8601 format (why
isn't there a simple "LANGUAGE(my-country(ISO))"
According to Mr Google, FESN is Field Engineering Service Number.
However ...what is it?
This is part of FMID description in SMP/E.
Example:
Type: FUNCTION Status: APP
FMID: AABBC10
Date/Time: 19.216 14:26:21 APP REWORK 2018236
FESN: 0503318
--
Radoslaw Skorupka
W dniu 25.09.2020 o 02:59, Neale Ferguson pisze:
How do I set the default logon procedure for a TSO user? Currently on the login
screen the Procedure field is empty and I’d like to set it to ISPFPROC. Using
search on the IBM Knowledge site results in a heap of stuff and I am having
trouble
This is not state of the art solution, but... You can prepare another
order and explicitly request all the missing PTFs in this order. Finally
you will have two (three..) orders which you can RECEIVE into CSI.
While it is convenient to have all needed PTF within single order it is
not required.
W dniu 24.09.2020 o 03:10, CM Poncelet pisze:
All software filters are fundamentally flawed, because they presume to
recognize and 'understand' what is or not SPAM - which is logically
impossible. The only reliable filter is the hardware one, which assumes
by default that every received email is
W dniu 23.09.2020 o 11:54, Juergen Kehr pisze:
Hello, perhaps a fairly stupid question:
In the description of the RACF TSO segment for several settings TSO defaults
are referenced.
HOLDCLASS(hold-class)
Specifies the user's default hold class. ...
If you … do not specify a value for
it the job. In a nice little environment where you can control these
things, you are probably correct, but that is not the case in this instance.
Brian
On Tue, 22 Sep 2020 12:55:05 +0200, R.S. wrote:
My €0.02:
This is typical problem when the goal is NOT defined.
Existing approach seems
W dniu 22.09.2020 o 14:11, Mark Jacobs pisze:
We have developers who put SYSMDUMP output to SYSOUT rather than a dataset. I'm
looking at ways to prevent those jobs from executing until they make JCL
changes. Are there any other exits, processes other than a JES2 exit (looking
at exit 6/60) to
My €0.02:
This is typical problem when the goal is NOT defined.
Existing approach seems ridiculous, but it exists. It works.
So, since it works, why to change it? What is the reason? What goal is
to achieve?
More ridiculous are the terms. JCL cannot be changed. WHY???
However JES2 exit6 which
le who fall for "I want you to handle my
money for me"; it's the greedy ones. And greedy people are foolish, but they're not
necessarily stupid.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of R.S.
Sent: Monday, September 2
W dniu 20.09.2020 o 17:00, Tony Brown pisze:
Please be advised:
My email account was hacked while I was on vacation last week. Generated from my email address were two
variations of emails with subjects of "Proof of Payment" or "Receipt of Payment" each
containing an "html" attachment. If
W dniu 08.09.2020 o 14:09, Robert Prins pisze:
On 2020-09-08 07:21, R.S. wrote:
Well, I sustain my words: the only EFFECTIVE way is to prevent.
All other ways are recipes what to do after failure happens, to
minimize the impact.
This resembles data loss scenario. What to do when you lost
the hacker at half price and only get
the DB2 datasets back. Just kidding of course. It should be a moral
decision to *never* pay any ransom, no matter what the cost to the
business. Of course that will never fly in reality.
On 9/7/2020 4:34 AM, R.S. wrote:
Conclusion: the only effective wa
Flash Express is dead end.
z14 and z15 has no Flash Express. Both have Virtual Flash Express, which
is part of regular RAM assigned to this role.
It is paid feature, IMHO it is much more efficient to buy this memory as
central memory and have much less paging.
Note, VFM is cut from same memory
W dniu 07.09.2020 o 14:57, kekronbekron pisze:
Makes me wonder.. some network products have a 'total lockdown' mode that stops
*anything* network. Like pulling the plug.
IBM can have a similar thing for z/OS TCPIP/SNA networks but I reckon it's more
effective if a similar lockdown (ugh)
early Linux using it with RAMACII. It was very very very slowly.
Carlos Bodra
IBM zEnterprise Certified
São Paulo – SP – Brazil
-Mensagem original-
De: IBM Mainframe Discussion List Em nome de R.S.
Enviada em: sexta-feira, 4 de setembro de 2020 10:10
Para: IBM-MAIN@LISTSERV.UA.EDU
Assunto
My €0,02
Ransomware on z/OS is very unlikely, but it is possible. We cannot say
it is impossible.
The possibility depends on some circumstances which affect the results
and possible prevention. It will be disscuessed. below (a little bit).
Will backup help? NO!
Backup may be last resort,
W dniu 03.09.2020 o 17:37, Jim Elliott pisze:
Tony,
Check my CMOS Processor Table page at
https://jlelliotton.blogspot.com/p/cmos-processor-table.html. I have the z/OS
and z/VM level sets listed there.
Comments to the table:
1. z/OS 1.1-1.5 were able to run on 9672 machines. z/OS 1.6 and
0 was also the first machine to mandate the use of LPARs.
Lennie Dymoke-Bradshaw
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of R.S.
Sent: 02 September 2020 15:37
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: [EXTERNAL] Re: Architectural Level Sets
W dniu 02.09.2020 o 1
W dniu 02.09.2020 o 15:08, Tony Thigpen pisze:
Peter, thanks.
But, my original question was not worded well. What I am really
looking for is:
What major feature change prevented older operating system versions
from running on the newer box.
For example: What changed on the z990 that forced
W dniu 31.08.2020 o 07:10, Brian Westerman pisze:
Even if you maintain SDSF via SAF (which you have to do by z/OS 2.5 because
that's all that will be supported) you will still have to update the RACF
OPERCMDS class (TSO RACF option 2 (general resource profiles)).
The profile name you need to
No, this FC is kind of license. There is no hardware behind and
definitely no change in integrated circuits like CPU.
And it would be wise to enable such "deep DAT" for z/VM world as well.
But there is no such feature.
BTW: there are several FC features which are enablements of some
IMHO the key to running system efficiently is to assure enough physical
memory.
Enough mean paging rate close to zero during normal operation.
Paging is still good, but only clean out inactive pages (looong time).
However DAT is in use even with no paging - just to translate virtual
storage
W dniu 26.08.2020 o 18:15, Mauri Kanter pisze:
Hi Mike:
Thanks for the answer
My question tried to clarify whether (or not) when a zCX Linux image uses DAT
and z/OS is running under z/VM, if it can be a TLB-hit or it always be a
TLB-miss because the so many levels of SIE-virtualization
My
W dniu 25.08.2020 o 23:00, Styles, Andy (ITS zPlatform Services) pisze:
Classification: Public
Isn't the goal here to identify jobs that have been submitted, but not started?
Long-running jobs don't fit that criteria, having already started - or have I
missed the point?
Good point.
IMHO you
W dniu 25.08.2020 o 16:52, Feller, Paul pisze:
Lizette, if you have some type of software like OPS/MVS you could look at
running a script from time to time that executes the JES2 command
$DJQ,DELAY=YES,DELAY and then look at the output from the command.
Isn't it as obsolete as dinosaurs?
I
Amen to that.
However I understood Steve's word as a sarcasm. Maybe I was wrong.
Obviously I don't like CANCEL, FORCE ARM and FORCE in normal procedures.
--
Radoslaw Skorupka
Lodz, Poland
W dniu 25.08.2020 o 04:10, Joel C. Ewing pisze:
It's part of that generic MVS principle from at least
W dniu 20.08.2020 o 16:58, Carmen Vitullo pisze:
I'm afraid to say I am in the same boat, old entries never removed for the same
reason, If there are duplicate entries I'm not sure who wins, I suspect SCHEDxx
because it is loaded after?
I suspect only OEM product entries should be in SCHEDxx
W dniu 17.08.2020 o 15:28, Charles MacNiven pisze:
Hi,
anyone aware of a migration path from z13s to z15 (T01 or T02).
Technically it is possible.
"Migration path" is a trick to do "upgrade" instead of "replacement". It
has meaning from tax, legal, accounting point of view.
I saw such
W dniu 14.08.2020 o 00:48, Jesse 1 Robinson pisze:
At one shop, before we moved to cartridge, we had 3420s that were so 'obsolete'
that spare parts became prohibitively expensive. On more than one occasion, our
loyal CE team carved replacement parts out of wood (!) to extend the lifespan
of
W dniu 10.08.2020 o 17:05, Pesce, Andy pisze:
Good morning everyone !
I am going to post this over in the RACF Listserv as well. So, I am trying to
go to z/OS 2.2 and I found this APAR OA49109.
I have a ton of accounts that were created many years ago that are not able to
login to z/OS 2.2.
;. I was
focusing on the z15 part.
Rex
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of R.S.
Sent: Friday, August 7, 2020 3:33 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: [External] IBM z15 Announcement Letter
As I wrote it is not the case when the book is no
BBC
--
Radoslaw Skorupka
Lodz, Poland
W dniu 07.08.2020 o 03:28, Seymour J Metz pisze:
PKB
--
Shmuel (Seymour J.) Metz
http://mason.gmu.edu/~smetz3
From: IBM Mainframe Discussion List on behalf of R.S.
Sent: Thursday, August 6, 2020 5:25 AM
brary" section of
Resource Link:".
Rex
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of R.S.
Sent: Wednesday, August 5, 2020 6:34 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: [External] IBM z15 Announcement Letter
I just read IBM Announcement Letter regarding z15 enhanceme
W dniu 06.08.2020 o 07:21, W Mainframe pisze:
Guys,Any small ESCON storage suggestion for a 7060-P30 model (Multiprise 3000).
Something really small.. a physical issue.. not logical..Thank youDan
IBM DS 6000
Luminex
BusTech
Everthing is as old as MP3000 and small.
--
Radoslaw Skorupka
W dniu 05.08.2020 o 17:58, Bob Bridges pisze:
Radoslaw, it seems to me two things are going on here. One is simply a mistake
of fact: Speed limits are ~not~ a good candidate for standardization. An
upper limit of 120mph would be possible in Texas but insane in North Carolina.
You said
W dniu 05.08.2020 o 17:07, Seymour J Metz pisze:
Must you be so obtuse? The structure that they devised is extremely hard to
change. Look at how long it took for everyone to switch from the Julian
Calendar to the Gregorian calendar.
Yes, Europe has had treaties, and before the ones that you
W dniu 05.08.2020 o 16:45, Edgington, Jerry pisze:
To all,
I am being asked about connecting zSeries, both z/OS and z/VM, to a cloud provider, for a
"3rd" copy of the zSeries data. I believe there are ways from z/OS using
DFSMShsm to access, both read/write, to cloud data. And some type of
Mainframe Discussion List [IBM-MAIN@LISTSERV.UA.EDU] on behalf of
R.S. [r.skoru...@bremultibank.com.pl]
Sent: Wednesday, August 5, 2020 8:16 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: OT: OOBOL and English was Re: Still COBOL After All These Years?
Federal limits, state limits... This is something
vernment has certain powers.
Joe
On Wed, Aug 5, 2020 at 7:16 AM R.S. wrote:
Federal limits, state limits... This is something I don't understand.
Standarization is good thing and common rules are easier to follow.
I just checked - 85mph in Texas, even for trucks. And 55mph in
On Behalf Of R.S.
Sent: Tuesday, August 4, 2020 7:23 AM
My opinion: I like american cars and roads.
However I don't understand common speed limit 55 mph which is in my opinion too
low for the road on desert.
BTW:
Here in Poland default limit on highway is 140 km/h.
However in Germany default
I just read IBM Announcement Letter regarding z15 enhancements
https://www-01.ibm.com/common/ssi/ShowDoc.wss?docURL=/common/ssi/rep_ca/0/897/ENUS120-050/index.html=en_locale=en
At the bottom they write about documentation.
The following publications are shipped with the product and will be
(I know it's off-topic)
My opinion: I like american cars and roads.
However I don't understand common speed limit 55 mph which is in my
opinion too low for the road on desert.
BTW:
Here in Poland default limit on highway is 140 km/h.
However in Germany default is ...your sanity. No speed
W dniu 02.08.2020 o 09:46, Brian Westerman pisze:
Oops, I may be wrong, I really should read what people have written completely. The z/OS
1.8 system does work on the z13s at the DR site (which is running z/VM, we have not tried
it native), but you are correct that it "might" not run on a z14
Generally, the rule is the following:
You z/VM cannot help you for running old NON-WORKING OSes on given
machine. Note, this is not about what is supported, but what is feasible
to run on bare metal (LPAR).
So, in this case z/OS 1.10 can run on EC12, but not on z14. Use of z/VM
doesn't
W dniu 25.07.2020 o 00:34, Paul Gilmartin pisze:
On Fri, 24 Jul 2020 12:40:17 -0700, Sri h Kolusu wrote:
//SYSINDD *
OPTION SKIPREC=1 $ SKIP HEADER
INREC OVERLAY=(81:23,4,UFF,EDIT=(), $ YEAR
20,3,CHANGE=(2,C'JAN',C'01',
Gentlemen,
Thank you for your help. JOIN is the function I know less than other
features. Time to change it, since it is good thing.
I'll look at Smart DFSORT Tricks, especially I'm also author of one of
them. ;-)
(it was ~20 years ago, Frank Yeager asked me for that trick, nothing
big, just
I have the following case:
Large (thousands) list containing filenames,
filea10002
fileb10041
filec20043
filed39093
longfileabc
anotherfile
...
and small (dozens) list of filename "exlusions"
longfileabc
fileb10041
...
Short list is subset of long list. All files has fixed lentgh name, no
W dniu 20.07.2020 o 05:47, Timothy Sipples pisze:
Mike Schwab wrote:
Port 23 is standard telnet. Port 3270 is non-standard TN3270E.
IANA has actually reserved port 3270 for "Verismart":HMC Integrated 3270 console
Excuse me, but IMHO OSA-ICC is just way to get rid off old equipment
like 3174L. It is NOT replacement, it is only for local (called non-SNA)
terminals, printers and ...CONSOLES. Consoles are the most important. Of
course 3172, 3274, and other controllers were not the goal.
IBM went looong
Usually it different.
First step is change platform.
Second step is change application or close the business.
Modern languages? Why is it always current MS .NET or how they name it?
--
Radoslaw Skorupka
Lodz, Poland
W dniu 16.07.2020 o 11:08, ITschak Mugzach pisze:
Rex,
I think the
To complement:
Now your HMC is connected to time network. To some time servers.
The HMC will act as time server for CPC. NTP is kind of cascading
structure.
--
Radoslaw Skorupka
Lodz, Poland
==
Jeśli nie jesteś adresatem
W dniu 16.07.2020 o 09:28, Gadi Ben-Avi pisze:
Hi,
I was asked to make sure that the mainframes are using the same time source as
the rest of the computers on our network.
I know what the NTP servers are in our network.
In the HMC, I found 'Customize Console Date/Time'
I added the NTP servers
-715-0595 Mobile
626-543-6132 Office ⇐=== NEW
robin...@sce.com
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of R.S.
Sent: Tuesday, July 14, 2020 3:17 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: (External):Re: Two Processors and One IODF
CAUTION EXTERNAL EMAIL
I hate new
Actually not. It is possible (not recommended!) to have shared DASD with
different addresses.
Example: CPCa and CPCb are connected to same DASD box. CPCa use dev num
3000-33FF and CPCb use dev num 1000-13FF for the same devices.
Devices can be varied online on both CPCs - local and remote.
a
direct connection between the LPARs, and most of the worries that you are
concerned about dont really exist in that situation.
Joe
On Tue, Jul 14, 2020 at 9:39 AM R.S. wrote:
Because of reasons. ;-)
Seriously: it is better to make it simpler and faster.
Your method: dump, ftp, restore.
Other
.
--
Radoslaw Skorupka
Lodz, Poland
W dniu 14.07.2020 o 15:26, Joe Monk pisze:
Why not just dump them, FTP the dump file between the two partitions, then
restore the dump file?
Joe
On Tue, Jul 14, 2020 at 8:11 AM R.S. wrote:
Well, that change the perspective. It's a pity you didn't mention
W dniu 14.07.2020 o 12:44, Gadi Ben-Avi pisze:
Thanks
I guess I'll have to bite the bullet. It's 393GB of files.
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of R.S.
Sent: Tuesday, July 14, 2020 1:23 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Copying Extended forma
You cannot do it.
Both datasets require to be DFSMS-managed and then cataloged.
So you have to share the catalog (BCS), otherwise you will get error or
uncataloged datasets on SMS volume, which is also not the best idea.
Another method: dump you datasets to PS file on shared volume. Then
I hate new names of PPRC and XRC (and PPRC-XD), but... But one should
know there are new features. New features with new names, but no old
name exist for them.
There are still PPRC, XRC, PPRC-XD, but there is also some kind of "XRC
without z/OS", performed by dasd arrays without host
W dniu 14.07.2020 o 00:27, TenEyck, Peter pisze:
What SMF record and report/tool could I use to determine the point of origin
for this attempted logon?
M 008 ABCD 20180 07:40:36.85 JOB03275 0090 ICH408I USER(RACFID )
GROUP() NAME(??? ) 395
E
Monk pisze:
"Regarding Kim - AFAIK he was was found innocent. I'm talking about
Megaupload case, not several former cases."
Nope.He's still in New Zealand, fighting extradition to the USA for
criminal charges for the megaupload case.
Joe
On Mon, Jul 13, 2020 at 6:50 AM R.S. wrote:
W dniu 13.07.2020 o 13:25, Joe Monk pisze:
My point is, once you rent that computer and put your stuff on it, it is no
longer "someone else's computer". It is now YOUR computer. YOU are
responsible for it.
Joe
On Mon, Jul 13, 2020 at 5:35 AM R.S. wrote:
I heard about Kim Dotcom, but I d
W dniu 10.07.2020 o 20:19, Michael Babcock pisze:
We are in the process of bringing DR back in-house and have a new
z15-T02 in our new facility (our current "home" machine is a
z14-ZR1). I want to be able to manage both processors from a single
IODF. I'd like to have the same CHPIDs, CUs,
Thu, Jul 9, 2020 at 7:51 AM R.S. wrote:
Azure? Cloud?
There is no cloud. It is just someone else's computer. ;-)
--
Radoslaw Skorupka
Lodz, Poland
W dniu 08.07.2020 o 17:46, Joe Monk pisze:
I do a backup to spinning storage, then a copy of that backup to Azure
for
long term.
Joe
On Wed, J
, Charles Mills pisze:
Unlikely?
Black swans do happen. How unlikely is a world-wide pandemic that cripples
economies around the world?
Charles
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
Behalf Of R.S.
Sent: Wednesday, July 8, 2020 2:33 AM
& tape question
CAUTION EXTERNAL EMAIL
Unlikely?
Black swans do happen. How unlikely is a world-wide pandemic that cripples
economies around the world?
Charles
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of R.S.
Sent: Wedne
IMHO no and there is no reason. Is the backup OK? Just read it. Any
error will be reported. Physical errors are reported by the hardware.
Is backup altered by hostile user? Protect it using RACF or else.
However educated and authorized user may alter backup and re-create hash.
Do you want to
Azure? Cloud?
There is no cloud. It is just someone else's computer. ;-)
--
Radoslaw Skorupka
Lodz, Poland
W dniu 08.07.2020 o 17:46, Joe Monk pisze:
I do a backup to spinning storage, then a copy of that backup to Azure for
long term.
Joe
On Wed, Jul 8, 2020 at 10:12 AM Seymour J Metz
Regarding tapes: this is one of the advantages of using HSM and physical
tapes. It's quite easy to manage that even very old backup is on quite
recently recorded tape. Migration from older tape system to new one is
piece of cake. For VTS things are a bit more complex but still it is
possible.
Yes. I general there are many choices:
1. Re-Activate LPAR profile. Of course change it before.
2. Use command (human or COMMNDxx) to CF CPU online.
3. Use Jim Mulder advice (PRESCPU).
4. Logically add CPU to the LPAR using HMC facilities (z10 or above).
Assuming the IPL is human-controlled (not
IMHO yes ...or no.
This is TS1140. 3592-E07 can be attached, but EH7 is smaller version and
I guess logically it is the same as E07, but it may not fit correctly
into TS4500. Maybe this is a question of some "real" hardware (cradle,
rail, bever), maybe not.
However it is a question for CE,
101 - 200 of 1921 matches
Mail list logo
