[rpomm...@sfgmembers.com]
Sent: Monday, April 20, 2020 11:09 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: [External] Re: JES2 parm change - how make sure it's right?
Lizette,
Wasn't it a $PJES2,ABEND command, then reply to the WTOR to shut it down w/o
cleanup then S JES2 to bring it up
up changes.
Rex
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Lizette Koehler
Sent: Friday, April 17, 2020 8:39 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: [External] Re: JES2 parm change - how make sure it's right?
You might want to "pop" JES2 ($PJES
tements, so the result would be
>
> ; FOO = NO ; Turn off the FOO option
> FOO = YES ; Generated by AUTO-OPTION
>
> Charles
>
>
> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> Behalf Of Seymour J Metz
> Sen
On Sat, 18 Apr 2020, at 02:38, Lizette Koehler wrote:
> Other option is to create a Secondary JES2, and test your parms there. I
> have done this in the past and it is not difficult to do.
I have a distant memory of using a secondary jes2 this way, and I think we
concatenated the test parm deck
: Re: JES2 parm change - how make sure it's right?
You might want to "pop" JES2 ($PJES2)
At start up, It will tell you which parms are out of sync with what it is
running.
$HASP442 and $HASP496 will tell you when parms are out of sync.
JES2 will always use what it last knew i
s
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
Behalf Of Cieri, Anthony
Sent: Friday, April 17, 2020 12:04 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: JES2 parm change - how make sure it's right?
I should have specified that you n
@LISTSERV.UA.EDU
Subject: Re: JES2 parm change - how make sure it's right?
Is there an RFE or Share requirement to examine the running JES2 and produce an
updated initialization deck that reflects the
initial parameters and the dynamic updates?
Mainframe Discussion List [IBM-MAIN@LISTSERV.UA.EDU] on behalf of
Jesse 1 Robinson [jesse1.robin...@sce.com]
Sent: Friday, April 17, 2020 3:57 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: JES2 parm change - how make sure it's right?
I took a little trip in the Wayback Machine. Once upon a time, you
Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
Behalf Of Cieri, Anthony
Sent: Friday, April 17, 2020 12:04 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: JES2 parm change - how make sure it's right?
I should have specified that you need to be at zOS V2.3 or
above.
TSERV.UA.EDU
Subject: (External):Re: JES2 parm change - how make sure it's right?
CAUTION EXTERNAL EMAIL
I should have specified that you need to be at zOS V2.3 or
above.
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Cieri, Anthony
Sent: Friday,
JES2
initialization waits in these cases for a response to the WTOR.
Hth
Tony
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Charles Mills
Sent: Friday, April 17, 2020 1:44 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: JES2 parm change - how make sure it&#x
: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: JES2 parm change - how make sure it's right?
Hmmm. I decided to try DSCHECK *before* I made any changes. (I have gotten
conservative in my old age.) I copied the JES2 PROC into a job. The EXEC
statement now says
//IEFPROC EXEC PGM=HASJES20,PARM=(CHECK),
//
Charles, Are you on 2.2 or 2.3+?It looks like maybe this was just added at
2.3.
I tried it at 2.2 and received:
IEF188I PROBLEM PROGRAM ATTRIBUTES ASSIGNED
$HASP433 INVALID SUBSYSTEM EXECUTION MODE
RC 20
Dana
On Fri, 17 Apr 2020 11:40:47 -0700, Charles Mills wrote:
>Hmmm. I decided to
, 2020 11:20 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: JES2 parm change - how make sure it's right?
Here are some ideas.
https://www.ibm.com/support/knowledgecenter/SSLTBW_2.3.0/com.ibm.zos.v2r3.hasa300/run_dscheck.htm
Sent from ProtonMail, Swiss-based encrypted email.
GPG Public Key -
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> Behalf Of Keith Smith
> Sent: Friday, April 17, 2020 10:54 AM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Re: JES2 parm change - how make sure it's right?
>
> The change is "
ssion List On Behalf Of
Charles Mills
Sent: Friday, April 17, 2020 1:44 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: JES2 parm change - how make sure it's right?
[[ SEI WARNING *** This email was sent from an external source. Do not open
attachments or click on links from unknown or suspicio
: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Keith Smith
Sent: Friday, April 17, 2020 10:54 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: JES2 parm change - how make sure it's right?
The change is "persistent" until it is changed again or you
Here are some ideas.
https://www.ibm.com/support/knowledgecenter/SSLTBW_2.3.0/com.ibm.zos.v2r3.hasa300/run_dscheck.htm
Sent from ProtonMail, Swiss-based encrypted email.
GPG Public Key -
https://api.protonmail.ch/pks/lookup?op=get&search=markjac...@protonmail.com
‐‐‐ Original Message
Behalf Of
Charles Mills
Sent: Friday, April 17, 2020 1:44 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: JES2 parm change - how make sure it's right?
[[ SEI WARNING *** This email was sent from an external source. Do not open
attachments or click on links from unknown or suspicious se
The change is "persistent" until it is changed again or you cold start
JES2.
On Fri, Apr 17, 2020 at 1:44 PM Charles Mills wrote:
> Humor me. I'm an experienced developer playing newbie sysprog in my spare
> time.
>
> I've got a JES2 system where I want to change the order of job classes for
>
Humor me. I'm an experienced developer playing newbie sysprog in my spare
time.
I've got a JES2 system where I want to change the order of job classes for
some of the initiators. I could get professional help but it is a service
bureau so that involves opening a ticket, dollars, etc., etc.
I hav
21 matches
Mail list logo
