itoring for Z/OS, zLinux
> and IBM I **| *
>
> *|* *Email**: i_mugz...@securiteam.co.il **|* *Mob**: +972 522 986404 **|*
> *Skype**: ItschakMugzach **|* *Web**: www.Securiteam.co.il **|*
>
>
>
>
>
> בתאריך יום א׳, 21 בינו׳ 2024 ב-7:59 מאת Jake Anderson <
Hello
We have a requirement of sharing our SMF data to vendor for a sizing
operation of our hardware connected to our mainframe
Our organization has a policy of masking the critical values before sharing
it. I see SMF datasets are are editable from ISPF.
Is there a way or someone has undergone
Yes I did mean CBU.
So I can activate another CBU license even when the LPAR is active and the
effects will take place immediately?
On Fri, Oct 20, 2023, 6:55 PM Radoslaw Skorupka <
0471ebeac275-dmarc-requ...@listserv.ua.edu> wrote:
> W dniu 20.10.2023 o 15:38, Jake Ander
Hello
I have activated the COD in our DR site for one of our production LPAR. I
understand every temporary COD license is valid for 10 days.
Post the expiration Can I activate the new COD license while the LPAR is up
and running? If activated will it take an immediate effect?
Jake
Hello
Cross posted
When I am trying to activate the IBM EE virtual IP it is failing with
message that the REAL IP OSA device fails to register it.
Why is the virtual IP looking at the device OSA of real IP ?
Jake
--
For
Hello All
I am just trying to understand if any of you are using DLM replication with
the Cascaded FICON feature?
I am curious to know what piece of hardware is required to implement
cascaded FICON.
Regards
Jake
--
For
Hello
Good morning
Is there any freeware product which can be installed using SMP/e.
Any pointers are appreciated
Jake
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu
t; create a
> CSR, get it signed, and then install and trust it and put it on a keyring.
>
> There is lots of Certificate basic education on the SHARE Web site and on
> NewEra zExchange.
>
> Charles
>
>
> -Original Message-----
> From: RACF Discussion List [mailto:r
Hello Tom
So the solarwind expects SNMPV2 ? Does SNMPV2 handle bulk request?
On Tue, May 9, 2023, 11:22 PM Tom Longfellow <
03e29b607131-dmarc-requ...@listserv.ua.edu> wrote:
> My experiences with Solarwinds interacting with z/OS have not been
> pleasant.
>
> First discovered it as my
Hello
Is anyone in the list who has already implemented Solarwind connection to
z/OS over SNMP ?
I have few questions about it and let me know if we can discuss it ?
Jake
--
For IBM-MAIN subscribe / signoff / archive access
Hello
Cross posted
Is there a RACF profile which can allow a help desk user to reset the
password for the user who has special operations attribute?
I don't want to give help desk person a SPECIAL authority but I want to
give him password reset authority alone
Jake
Hello
Cross posted
Is there a way to know on who a changed a users password? Any SMF record
that can help ?
Or any audit reports in RACF ?
Jake
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
way? What information about the tape dataset do you
> need? To determine with certainty that the dataset on the tape can be read?
>
> -Original Message-
> From: IBM Mainframe Discussion List On Behalf
> Of Jake Anderson
> Sent: Monday, March 20, 2023 10:34 PM
> To: IBM-MAIN@LIST
hem from the
> sender and know the content is safe.
>
> On Mon, 20 Mar 2023 17:10:20 +0400, Jake Anderson <
> justmainfra...@gmail.com> wrote:
>
> >Hello
> >
> >I would like to understand how DLM users are able to read the contents
> >of the virtual tape
Hello
I would like to understand how DLM users are able to read the contents of
the virtual tape and the print the dataset with in each label of it ?
We are taking volume level backup to the virtual tape and is it possible to
list a particular tape dataset to see it's content?
Regards
Jake
Hello Joe
Would you please point me to the manual where it explains?
On Sun, Feb 12, 2023, 1:20 PM Joe Monk wrote:
> I thnk a VTAM cmd code of 23 is an application requested cancel.
>
> Joe
>
> On Sat, Feb 11, 2023 at 10:46 PM Jake Anderson
> wrote:
>
> > Hello
>
Hello
One of our application was reporting the below error. I was looking through
the SNA and IP codes but not able to find or am ignorant about the below
code
VTAM error RtnCd:100900 Sense: Cmd:23
Where exactly I can find the explanation for 100900 ?
Jake
We use DFRMM. Is there any specific reporting batch that I can rely on ?
On Mon, Feb 6, 2023, 7:49 AM Gibney, Dave <
03b5261cfd78-dmarc-requ...@listserv.ua.edu> wrote:
> Tape management system?
>
> > -Original Message-
> > From: IBM Mainframe Discussion Lis
Hello
We are using DELL DLM8500. Is it possible to know from the z/OS perspective
on how many tapes being consumed on a monthly basis ? Is there any report
within SMF or any facility within DLM can help me to know usage of virtual
tapes ?
Regards
Jake
Is there a command or facility within DS8K to generate storage array
utilization report ?
On Thu, Jan 19, 2023, 5:51 PM Paul Gorlinsky wrote:
> This is the theoretical maximum… not realistic… the available usable space
> is 100% determined by the blksize and optional key size… zOS use at most
>
Hello
I was going through the storage usage in DS8K Gui login And I can see the
utilization of CKD Pool is given as 1.99Kmod1
Is there a way to convert these value in Terabyte?
Jake
--
For IBM-MAIN subscribe / signoff /
3390-54s if you have the space?
>
> On Mon, 3 Oct 2022 at 14:22, Jake Anderson
> wrote:
>
> > Addresses are not changing
> >
> > It's the same UCB
> >
> > On Mon, Oct 3, 2022, 5:14 PM Seymour J Metz wrote:
> >
> > > HCD if addresses have
e Discussion List [IBM-MAIN@LISTSERV.UA.EDU] on behalf
> of Jake Anderson [justmainfra...@gmail.com]
> Sent: Monday, October 3, 2022 5:37 AM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Dasd Mod conversion mod9 to mod27
>
> Hello
>
> We are planning to perform mod conversion of mod
Hello
We are planning to perform mod conversion of mod 9 to nod 27 from DS8K.
Post the mod conversion before initializing are there any other steps needs
to be performed in zOS ?
Jake
--
For IBM-MAIN subscribe / signoff /
Hello
Cross posted
Does anyone know the default cipher option supported by wc3270 TELNET
connectivity to mainframe?
Jake
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu
May be CBT File 036 fixpds can help ?
On Wed, Sep 28, 2022, 4:06 PM Carmen Vitullo wrote:
> ouch that sucks, I know if it was a PDS there are tools to get the
> member back, it's not actually gone until you compress, or write over it
> IIRC?
>
> I wonder if the same tools can help, I'd be
Finally it was a problem from the windows share where the Linux path was
mounted
There were some permission issues from windows and it took lot of time for
the windows technicians to acknowledge
On Sun, Sep 18, 2022, 1:17 PM Jake Anderson
wrote:
> Hi
>
> Something I didn't incl
in
it's log
While doing GET there is no data transfer but it destroys the local file in
windows without any data transfer
On Sat, Sep 17, 2022, 6:21 PM Jake Anderson
wrote:
> Ftp trace didn't show any error causing zero transfer
>
> On Sat, Sep 17, 2022, 4:03 PM Michael Babcock
Ftp trace didn't show any error causing zero transfer
On Sat, Sep 17, 2022, 4:03 PM Michael Babcock wrote:
> Jake, did you add TRACE to the PARM on the EXEC PGM=FTP statement?
>
> On Sat, Sep 17, 2022 at 6:27 AM Jake Anderson
> wrote:
>
> > Hello
> >
> >
Hello
Cross posted
I was able to create the user with RESTRICTED attribute
I have given a surrogate access to a STC owner is to the ID which I created
with RESTRICTED attribute
Here when we submit job with USER=EXTBATCH
It internally does a FTP to a Linux server. For connecting the Linux using
--Original Message-
> > From: IBM Mainframe Discussion List On
> > Behalf Of Jake Anderson
> > Sent: Sunday, September 04, 2022 11:38 AM
> > To: IBM-MAIN@LISTSERV.UA.EDU
> > Subject: Re: Old volumes DFHSM WTOR
> >
> > I deleted the volume using delvo
gt; Brian
>
> On Sun, 8 May 2022 at 02:39, Jake Anderson
> wrote:
>
> > Hello Group
> >
> > We used to have a volume named OSSYB1 in ARCMDxx which I have removed
> > already and DFHSM comes up successfully. After sometime DFHSM complains
> > that the vol
Hello
Cross posted
I believe DIR Hello (DISK will store the command output in my
HLQ.FTP.DIROUTP. but is it possible to store in different HLQ ?
Jake
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send
Hi
Is there any documentation available to review the below work exception
report that I got under RMF
Name Reason Critical val. Possible cause or action
z/OS 2.4
JES2 ENQ -SYSZJES2 12.0 % delay VERSION.00092B33
Regards
Jake
Hello All,
Good morning
I tried running HSEND BACKVOL CDS but I got failed with below message,
infact I tried allocating the dataset with LLQ V0 but still it fails
ARC0744E MCDS COULD NOT BE BACKED UP, RC=0036, REAS=. MIGRATION, BACKUP
ARC0744E (CONT.) FRBACKUP, DUMP, AND RECYCLE HELD.
Hello
One of the virtual tape in RMM shows rej by tap mgt sys
But when I go to DLM GUI I can see they have data in it
Any procedure to correct this error and I don't know why it went into this
condition
Has anyone seen this error and how was it fixed ?
Jake
ing because I've seen other
> customers swap SFP's and cause more problems than it's worth.
>
> Either way, glad to hear it's working now.
>
> On 8/16/2022 8:56 PM, Jake Anderson wrote:
> > So I did wrap plug test to ensure the ports were fine and they were good
> >
> > S
gt; >> wrote:
> >>
> >>> What's your question?
> >>> Link monitor means no physical connection to the switch, which means
> you
> >>> card will not work.
> >>> Reason? A lot of, including broken cable, improper cable (MM instead of
> >&
mainframe. I
> forget the product since it's been about 12 years since we did a POC for
> the product
>
> Carmen
>
>
> On 8/16/2022 8:54 AM, Jake Anderson wrote:
> > It's basically we run a non IBM Database in mainframe
> >
> > The user(management) have a list
for DASD
> subsystems to another subsystem for DR
>
> for Data bases there's IBM's Info-sphere change data capture
>
> Carmen
>
> On 8/16/2022 8:24 AM, Jake Anderson wrote:
> > Hi
> >
> > We have requirement whenever someone saves a record(non-mainframe user)
> in
&
Hi
We have requirement whenever someone saves a record(non-mainframe user) in
Linux.We automatically wants to get those record and ftp to mainframe and
and pull all details from database then save it back to the same location
where the user saves his Initial record.
Has anyone tried this
> card will not work.
> Reason? A lot of, including broken cable, improper cable (MM instead of
> SM and vice versa), bad connection (Tx to Tx...), disabled port on the
> switch...
>
>
> --
> Radoslaw Skorupka
> Lodz, Poland
>
>
>
> W dniu 10.08.2022 o 07:19, Jake A
Hello
Cross posted
I apologize for my ignorance.
I was looking for the status of one of our OSA card under OSA advanced
facilities under HMC. For one of their PCHPID belonging to OSA shows the
port status as 'LINK MONITOR'
When I checked with my network team if their switch sees the MAC
Hello,
Is there a sample JCL to list the top consumers of Virtual tape allocation
or any smf record which can tell about the virtual tapes highest
consumption based on the Jobs.
Jake
--
For IBM-MAIN subscribe / signoff /
Hello
I have extracted SMF119 and I am able to see when a terminal opened an
application, remote IP, LU Name.
Is it possible to know the screen time or the time spend by a terminal ID
inside an application(accessed by an LU)?
Jake
Hello
Good morning to all
Due to a business reason we are swapping our mainframer sites where the
current DR machine will be converted to production and Production machine
will be a DR site. I understand these exercise are mostly done by the IBM
CE from support element. Is there anything to be
Hello Group
We used to have a volume named OSSYB1 in ARCMDxx which I have removed
already and DFHSM comes up successfully. After sometime DFHSM complains
that the volume OSSYB1 is offline and it throws a WTOR to reply with a
valid device number to make it online.
Not sure why DFHSM doesn't say
The only challenge I can see is that I can't resize an existing one as it
gives me message as 'In use'.
On Wed, Mar 30, 2022, 9:30 AM Jake Anderson
wrote:
> Thanks Mike
>
> So just pick the non-active one.(with zero %),. Delete them. Then Define a
> new SMF MAN and preformat a
w.ibm.com/docs/en/zos/2.3.0?topic=sums-switching-between-smf-logging-smf-data-set-recording
>
> On Wed, Mar 30, 2022 at 5:00 AM Jake Anderson
> wrote:
> >
> > Hello
> >
> > Is it possible to resize the SMF Man dataset on fly witho
Hello
Is it possible to resize the SMF Man dataset on fly without an IPL ? Will
there be any impact ? Or it is doable without a disruption.
Jake
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
Hello
I have two PS datasets having some programming codes , Is it possible to
compare these two PS and produce a third PS datasets by removing duplicate
entries ?
Jake
--
For IBM-MAIN subscribe / signoff / archive access
I enabled debug3 and daemon logging for SSHD task
Finally it was because of bad ownership and modes. Fixed that and its all
good now
Thanks to all who gave your valuable suggestions
On Mon, Mar 14, 2022, 8:29 AM Paul Gilmartin <
000433f07816-dmarc-requ...@listserv.ua.edu> wrote:
> On Sun,
certificate works fine with other LPAR2.
SSHD configuration are same on both the LPARS. Is there any places that I
need to be looking for ?
On Sun, Mar 13, 2022, 5:49 PM Paul Gilmartin <
000433f07816-dmarc-requ...@listserv.ua.edu> wrote:
> On Mar 12, 2022, at 23:38:36, Jake Ander
for password. Is there any parameter within SSHD_CONFIG had
to be tweaked ?
On Sun, Mar 13, 2022, 9:53 AM Ed Jaffe wrote:
> On 3/12/2022 9:46 PM, Jake Anderson wrote:
> > Hello
> >
> > Cross posted
> >
> >
> > Is it possible to do a password
Hello
Cross posted
Is it possible to do a passwordless login from my CentOS Linux to OMVS ? Is
there any documentation which helps ?
Jake
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
Hello
Cross posted
Good evening
Is it possible to copy a rexx output to a OMVS file everytime by overriding
it ?
Any samples that I can refer to ?
Jake
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send
Thank you so much
On Tue, Feb 8, 2022, 10:54 AM Binyamin Dissen
wrote:
> On Tue, 8 Feb 2022 08:05:32 +0400 Jake Anderson
> wrote:
>
> :>We have some dumps taken on 6th February but is it possible to know at
> what
> :>time the dump was captured using IPCS and
Hello
We have some dumps taken on 6th February but is it possible to know at what
time the dump was captured using IPCS and can we see the timestamp anywhere
in DUMP using IPCS ?
Jake
--
For IBM-MAIN subscribe / signoff /
Hello Group
I am trying to move maintenance root zfs which is 5000 cylinder in size.
The environment what we have is two monoplex. I tried doing dump the root
into a shared DASD(MOD-27) but it fails with D37.
What's the best way to clone a zfs from one monoplex environment to another
? Our DASD
Physical sequential dataset if it is created with CSV format
On Tue, 11 Jan, 2022, 11:40 am Timothy Sipples, wrote:
> Jake Anderson wrote:
> >I am trying to explore if there is a inbuilt module or program to convert
> a
> >PS file into XML format.
>
> A physical s
Hello
I am trying to explore if there is a inbuilt module or program to convert a
PS file into XML format.
Is there a way to convert ?
Please advise
Jake
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send
Hello
Is it possible to take RMF III - options on hourly snapshot to a PS file or
GDG ? Reason why I want is that recently we had an outage due to memory
issues and I wanted to go back and analyse the memory usage.
Any pointers are much appreciated
Jake
Hello
Is there a freeware or any sample REXX which can produce a human readable
output to understand any IP tied up to a VTAM(LU) by reading the SMF
dataset. We don't have SAS or MXG in our shop.
Any pointers would be appreciated.
Jake
Hello
I moved the zfs to the new system and when I try to recatalog I get this
error message and the dataset is in that volume
IDCAMS SYSTEM SERVICES TIME: 22:36:40
DEFINE CLUSTER(NAME(OMVS.OSRSA2.ROOT.ZFS) -
VOLUME(OSRSA2) -
LINEAR -
RECATALOG)
IDC3014I CATALOG ERROR
IDC3009I
We were asked IBM to do downgrade the activation done by mistake and
activate TEST CBU. During this exercise do we need a downtime or it can be
done when the system load is at minimum ?
On Mon, 6 Dec, 2021, 7:16 pm Pommier, Rex, wrote:
> Right, but if you have a CBU you are probably doing your
Hello
Is it possible to swtich back to temporary CBU activation incase it someone
has activated the CBU permanently by mistake ?
Jake
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
security for SDSF
On Mon, 29 Nov, 2021, 10:16 pm Watkins, Philip S.,
wrote:
> Do you have the proper security for operator commands
>
> XA TSOAUTH = OPER
> XA TSOAUTH = CONSOLE
>
> -Original Message-
> From: IBM Mainframe Discussion List On Behalf
> Of Jake A
on.gmu.edu/~smetz3
>
>
> From: IBM Mainframe Discussion List [IBM-MAIN@LISTSERV.UA.EDU] on behalf
> of Jake Anderson [justmainfra...@gmail.com]
> Sent: Thursday, November 25, 2021 4:19 AM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: z/OS 2.4 Cons
Hello
Recently I upgraded the z/OS 2.2 to 2.4 Post that I am receiving the below
message while I am trying to initialise a dasd volume using ICKDSF, Though
the number 38 shows as the WTOR in Job log to initialise but if I get R
38,U it doesn't take it.
RESPONSE= IEE703I REPLY 38 NOT
Hello
Cross posted
We have one of an Lpar still using ISPRMxx to control SDSF security. Is
there documentation which helps in understanding to migrate from ISFPRM to
SDSF RACF security
Regards
Jake
--
For IBM-MAIN subscribe /
Hello All
Thanks to Kurt. Under the /Service some of the directories were missing and
I created those. Then tried applying again and it went fine.
Thanks all for your help
On Tue, 9 Nov, 2021, 7:51 pm Kurt J. Quackenbush, wrote:
> > Based on reason code I have looked into each directory and
Hello
I have double checked the DDDEF and the path is correct for the failing
DDDEF
On Tue, 9 Nov, 2021, 3:31 pm SUBSCRIBE IBM-MAIN Marc Yves Desravines, <
marc.yves.desravi...@kyndryl.com> wrote:
> Hi Jake,
>
> I suspect the problem is related with a wrong DDDEF. Could you list the
> DDDEFs
Hello
Cross posted
I am applying a APAR related to CSSMTP to zOS 2.4 and it fails with below
messge
GIM42500W AN ATTEMPT TO OBTAIN THE NAME OF THE PHYSICAL DATA SET CONTAINING
A
SYMBOLIC LINK FOR HFS EZAMLCAT IN SEZAMMSC FAILED. THE RETURN
CODE
FROM THE BPX1LST
Hello
Cross posted
Is there still uses IBM configuration assistant to deploy TTLS policy while
I understand zOSMF has the capability to do the same. For educational
purposes I am looking for IBM configuration assistant tool wizard.
Can someone please point me in the right direction?
Jake
Hello
Is there a way to know or understand about how many times a module in LPA
got used or called without using any priced products ?
Jake
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
om/cd/E19190-01/LTO5_Vol2_E2_not_restricted/LTO5_Vol2_E2_not_restricted.pdf
>
> On Sun, Aug 22, 2021 at 10:51 AM Jake Anderson
> wrote:
> >
> > Hello
> >
> > I am just trying to understand if we can modify the block size of LT05
> > drive. Currently it is having a block size
Hello
I am just trying to understand if we can modify the block size of LT05
drive. Currently it is having a block size of 80k and Is it possible to
modify to 256k block size ?
Jake
--
For IBM-MAIN subscribe / signoff / archive
"Is this behavior for all commands? Only display commands? Only specific
display commands?"
Yes it's for all display command and only for a specific users .
On Wed, 26 May, 2021, 6:28 pm Peter Relson, wrote:
> Is this behavior for all commands? Only display commands? Only specific
> display
Hello
Usually when we issue a MVS display command from SDSF we get immediately
get to see the output in bold white message and after that we can see
either in SYSLOG or ULOG. One of our user from operation is issuing the
command but doesn't get a immediate output in bold white instead it just
Hello
Good evening
Is there a possibility to set an email alert in IBM CSS whenever the status
of replication changes ? Like from prepared to suspended or Preparing ? Or
atleast whenever the status is suspended can we set an alert in IBM CSS to
send email alert to our email boxes ?
Jake
Hi
So from the mainframe perspective zoning is done even if the connectivity
passes through SAN ? Sorry if my understanding is incorrect ?
Jake
On Mon, 10 May, 2021, 2:32 pm Radoslaw Skorupka,
wrote:
> W dniu 10.05.2021 o 06:36, Jake Anderson pisze:
> > Hello All,
> >
&
Hello All,
Good evening
I am trying to understand on how the ZONING part works when the
connectivity to storage box or the tape device goes through a SAN switch.
How does the ZONING is done and is there any documentation with an example
to understand better. I am trying to google to see if I can
Hello
We are in process of getting new virtual tape solution to replace an
existing one.
Solution is to get the channel connected to two ficon directors.and connect
them virtual tape.
So the question is instead of ficon director can we use the SAN switch ?
Jake
Hello
We are analysing if EMC DLM would be a right fit to replace IBM VTL.
I am trying to understand about backup cycles using EMC DLM when we use
single backup solution and single virtual tape library to backup both
mainframe and open systems.
Is there a possibility for contention ?
Will
If I understand zosmf is going to connect to IBM site over the internet to
download it's software.What if a mainframe data centre which doesn't
connect to internet or have restrictions ?
On Thu, 4 Mar, 2021, 6:48 am Ed Jaffe, wrote:
> On 3/3/2021 2:54 PM, Radoslaw Skorupka wrote:
> > I hate it!
Hello
Is there a way to determine the entire defined range of tapes size in RMM ?
Regard
Jake
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO
Apologies for giving a minimal information
This is a SNA application where user use to connect Database and they
receive FDBK2 00
This is the only information I have from the log and I have raised a case
with Product support for further investigation and meanwhile just curious
about these
Hello
Apologies for my ignorance. One of our product failed with FDBWD : 00141300
FDBK2.
I am not able to decode the meaning or explanation for FDBWD. Could someone
please help to understand so that I can make sure I understand fully ?
Jake
Hello
Are there anyone who is still using offsite tapes (Vaults). Is there any
specific JCLs are there to list the tapes in drive, list the tapes in
vaults and movement inventory records to record movement of Tapes.
I did look into SYS1.SAMPLIB and ran some some report but still it gives me
a
Hello
I apologise for the dummy question as I am new to Tape DFRMM
We have a job which searches the RMM catalog for the tape to be in drive
and vault.
Some questions popped out in my mind. How does RMM decides that a
particular tape has to be moved to VAULT and how does it know that tape
must
Hello
Is there an equivalent of EDGRRPTR after zOS 1.13 ? As I don't find this
dataset in SYS1.SEDGEXE1.
Any suggestions would be appreciated
Jake
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email
Hello
Apologies for the dummy question
Can SMF SYS(TYPE) and SMF(NOTYPE) co-exist ?
Is there any sample if someone has ?
Jake.
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
e to parse through MOST SMF records without something that can
> handle the record section offsets
>
> Lizette
>
>
> -Original Message-
> From: IBM Mainframe Discussion List On Behalf
> Of Jake Anderson
> Sent: Saturday, October 24, 2020 11:08 PM
> To: IBM-MAIN@
Unfortunately I can't unfold in detail about our management requirements
here but technically looking for some pointers.
On Sun, 25 Oct, 2020, 10:14 am Jake Anderson,
wrote:
> KB,
>
> Not a stink and it just a requirement.
>
> On Sun, 25 Oct, 2020, 10:11 am kekronbekron, <
‐‐‐ Original Message ‐‐‐
> On Sunday, October 25, 2020 11:37 AM, Jake Anderson <
> justmainfra...@gmail.com> wrote:
>
> > Hello
> >
> > Cross posted.
> >
> > We have a SMF data for some years and I would like to fetch a user'
Hello
Cross posted.
We have a SMF data for some years and I would like to fetch a user's logon
history like when he was logged with all time intervals.
Is there a sample JCL or process you are following without having to use
any third party product to process.
Could someone please share any
Hello
Are there any freeware utility in CBTTAPE to check if a specific dataset is
being used in parmlibs or proclib or by any batch ?
Jake
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
Thank you for the information.
While requesting for a eject a tape in use will report us the same ? I mean
will it stall our request when a tape in use .
On Thu, 27 Aug, 2020, 7:00 pm Erika Dawson, wrote:
> I checked with the RMM service team and they had indicated that clients
> will
Initial layer to have a biometric after it validates the Mainframe logon
should be allowed
On Tue, 25 Aug, 2020, 8:02 pm Joe Monk, wrote:
> I dont understand how this is supposed to work. 2FA is for ONE user. If you
> have many users using one common userid, the system should invalidate any
>
Hello,
Cross posted.
We are planning to implement 2FA for mainframe logons. Here we have a
challenge where we use a common mainframe ID and would like to know if
there is a way to enforce 2FA which can identify a person based on
fingerprint or any other mechanism which can identify a person even
1 - 100 of 496 matches
Mail list logo
