Now I can answer: I hate this disclaimer. I was almost ready to switch to
private email when they started with this cr*p, but 1. I'm lazy, 2. other
people have similar disclaimers, so I felt not so guilty.
Regarding gmail - I already have gmail account and I don't want to use it for
other
Well, In my opinion there is no such tool or process.
Few remarks:
1. Assuming you have such checker and just tested BPXPRM member. Few minutes
later things may change - someone can delete or rename some ZFS. Or just modify
BPXPRM.
2. "Prior IPL" is a little bit ambigous. Does it mean the
IMHO it would be hard to get something cheaper and not worse. Of course prices
depend on contracts and your need may be satisfied with very basic tool.
--
Radoslaw Skorupka
(from new mail)
--
For IBM-MAIN subscribe / signoff /
on.gmu.edu/~smetz3
From: IBM Mainframe Discussion List [IBM-MAIN@LISTSERV.UA.EDU] on behalf of
R.S. [r.skoru...@bremultibank.com.pl]
Sent: Wednesday, January 20, 2021 1:02 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: TSO RECEIVE and System Determined Blksize
Discussion List [IBM-MAIN@LISTSERV.UA.EDU] on behalf of
R.S. [r.skoru...@bremultibank.com.pl]
Sent: Wednesday, January 20, 2021 12:32 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: TSO RECEIVE and System Determined Blksize (was: TSO XMIT and no
member list)
W dniu 20.01.2021 o 18:10, Seymour J
W dniu 20.01.2021 o 18:10, Seymour J Metz pisze:
There are ZAPs to change it in original IBM code.
"Illegal" from SMP/E point of view
No.
Yes.
--
Radoslaw Skorupka
Lodz, Poland
==
Jeśli nie jesteś adresatem tej
W dniu 20.01.2021 o 17:03, Wendell Lovewell pisze:
Radoslaw,
Could you please elaborate on your comment "never solved issue like non-SDB (system
determined blocksize) in XMIT and RECEIVE command"?
I have been having an issue with TSO RECEIVE (and a program that also calls IEBCOPY) when
SDB
Thank you everyone for your answers.
It seems I can redirect SYSOUT to DD DUMMY for a while.
In fact I wanted to switch off IEBCOPY reporting, AFAIR it was LIST=NO.
It can be specified in PARM field or as an optional parameter of COPY
command in SYSIN.
It is not exactly the same as whole sysout
W dniu 20.01.2021 o 01:23, Paul Gilmartin pisze:
On Wed, 20 Jan 2021 00:55:59 +0100, R.S. wrote:
I want to switch off member list when TSO XMIT ... DA(SOME.PDS) is running?
I just want to issue the command and I don't want to see loong
member list on the screen.
Any clue?
OUTTRAP?
Well
I want to switch off member list when TSO XMIT ... DA(SOME.PDS) is running?
I just want to issue the command and I don't want to see loong
member list on the screen.
Any clue?
--
Radoslaw Skorupka
Lodz, Poland
==
W dniu 19.01.2021 o 17:22, Cameron Conacher pisze:
A KSDS with duplicate full primary key values?
Are you sure?
I'm sure it is possible.
VSAM is just set of data... Data set on disk. ;-)
Yes, it is hard to have duplicate key WHEN USING VSAM (access method).
However is is enough to use CI mode
lease, so that title does not pass.
Only then is it considered OPEX.
If it's a dollar buyout lease, then its a CAPEX lease and must be
accounted for as CAPEX.
Joe
On Mon, Jan 18, 2021 at 6:46 AM R.S. wrote:
W dniu 18.01.2021 o 13:28, Joe Monk pisze:
"2. EOM and EOS are important,
W dniu 18.01.2021 o 13:28, Joe Monk pisze:
"2. EOM and EOS are important, but IMHO prices are more important. In
many cases it is cheaper to replace machine than to buy service contract
for existing (old) one. And it is rather cheaper to buy newer model even
if new and new-1 are available."
The
W dniu 18.01.2021 o 10:55, Peter pisze:
Hello All,
Just curious to understand what is the minimum duration for the z hardware
to be from withdrawn from marketing ?
Are there any specific factor IBM follows ?
There is excellent paper describing all the dates (GA, EOM, EOS).
I found the link:
W dniu 14.01.2021 o 16:00, Bill Giannelli pisze:
can anyone provide JCL to tar a USS directory?
thanks
Bill
Correction:
//K10 EXEC PGM=BPXBATCH,PARM='PGM /bin/tar -?'
//STDOUT DD SYSOUT=*
//STDERR DD SYSOUT=*
--
Radoslaw Skorupka
Lodz, Poland
W dniu 14.01.2021 o 16:00, Bill Giannelli pisze:
can anyone provide JCL to tar a USS directory?
thanks
//K10 EXEC PGM=BPXBATCH,PARM='SH tar parameterscd;ls'
//STDOUT DD SYSOUT=*
//STDERR DD SYSOUT=*
ls is redundant, it is just as example of second command within the step.
--
W dniu 14.01.2021 o 15:57, Horne, Jim pisze:
Hi all,
This may sound like a stupid question but is there a way to start a second
started task from a running one when the currently running one completes. I
know how to submit a batch job from a final step of a started task but I don't
know how
W dniu 12.01.2021 o 06:42, Timothy Sipples pisze:
Radoslaw Skorupka wrote:
That's what we call brute force attack.
There is no way to protect against it ...or maybe there are some
things to help.
1. Do not give your RACF db to hackers. Never.
2. Enforce periodic password change.
3. Use KDFAES.
W dniu 11.01.2021 o 17:44, Charles Mills pisze:
https://en.wikipedia.org/wiki/John_the_Ripper
There is a downloadable plugin for RACF -- old RACF hashing only, I *think*.
@R.S. writes
1. Do not give your RACF db to hackers. Never.
No one "gives" their RACF DB to anyone (I
Other solution: just circumvent restrictions. Simply download HOLDDATA
using private PC and then send it via email. Yes, it is a crime... but
it works.
Of course it would require some effort to understand that it is possible
to allow ftp to IBM site, especially limited to few persons which have
That's what we call brute force attack.
There is no way to protect against it ...or maybe there are some things
to help.
1. Do not give your RACF db to hackers. Never.
2. Enforce periodic password change.
3. Use KDFAES.
4. Use passphrases.
First is obvious.
Effectiveness of the second is
I just found some IBM document showin parameters of ...YADRO mainframes.
It is dated 30-04-2017.
Yes, the term "mainframe" is used. There are parameters like MSU,
keywords like PSLC, zNALC, Coupling Facility, z/OS, z/VSE, etc.
YADRO is russian IT company - that's all I know. I'm even not sure
W dniu 11.01.2021 o 12:07, David Spiegel pisze:
Hi Tim,
You said: "... but there are at least three choices ..."
Other than RACF, ACF2 and TSS are there others?
Yes. However IMHO none of them is active.
Examples:
1. Deadbolt. It was announced, but I don't know if any shop implemented it.
2.
W dniu 11.01.2021 o 10:05, Sean Gleann pisze:
This has almost certainly cropped up before but try as I might, I can't
spot anything obvious in the archives.
I have a need to strip sequence numbers from members in a PDS or PDSE.
The input PDS(E) has DCB characteristics of REFCM=FB,LRECL-80, and
W dniu 08.01.2021 o 17:46, Paul Gilmartin pisze:
On Fri, 8 Jan 2021 16:07:31 +, Seymour J Metz wrote:
A zFS is stored in a VSAM linear data set. I found "Only extended-format
key-sequenced data sets can be compressed." at
I just RTFM. No VSAM dataset can be compressed using zEDC.
Of course VSAM datasets dumped with DFSMSdss may be compressed, because:
a) output dataset is PS, which is eligible for zEDC compression.
b) dss itself can use zEDC to compress data written to output. Such
dataset can be writted on tape
W dniu 08.01.2021 o 16:00, PINION, RICHARD W. pisze:
Can a ZFS dataset be defined with the DATACLAS zEDC compression option? I'm
looking for a way
to reduce the size of our SMPNTS datasets.
I guess YES.
However ...just try it. Create some test ZFS with copression and put
some txt files
W dniu 06.01.2021 o 09:19, Tom Ross pisze:
BTW: Is there description/list of COBOL versions anywhere?
I don't know, but I have lists! Here is the entire history, no names, just
product ids, but you can kind of tell which is which by the dates.
OS/VS COBOL, VS COBOL II, etc etc
Note: You
"compiler sandbox" as cumbersome. Yes, I heard about
licencing.
3. That is more or less what I am asking about -- what are the license
options. "I'll just use R.S.'s machine" is probably not the answer I need.
I'm sorry for your dissappointment. However, please read all th
W dniu 30.12.2020 o 20:21, Billy Ashton pisze:
Hey folks! I have a vendor product program that looks for different
DDnames depending on the control statements passed into the program.
Is there any way to define a dynamic DD statement using JCL symbols?
For example, I would love to have //TB to
W dniu 30.12.2020 o 18:46, Charles Mills pisze:
Does anyone know if there is an IBM license that covers the CICS COBOL
co-compiler short of a full-blown CICS TS license?
In other words, could you license the co-compiler for a "development
machine" without having to license the full CICS
W dniu 30.12.2020 o 15:17, Paul Gilmartin pisze:
On Wed, 30 Dec 2020 11:22:42 +0100, Stefan Skoglund wrote:
UNIX had early on cron which runs specific jobs regularly at
predetermined times while at (atd) is more like a one of JCL batch job.
...
LINUX has the same functionality.
Of course.
Yes, exactly.
This is one of the reasons for custom-defined table.
Custom-defined is not "standard"
And yes, the goal is to change selected characters, and prepare the
opposite table. Of course translation can be reversible when the table
has unique values (this is first of the conditions) .
s
Bernd
Am 29.12.2020 um 20:01 schrieb R.S.:
The input file contain some text and some other fields. CR/LF,
RECFM=FB/VB and other "end of line" issues are not relevant.
The idea is to convert it to readable format, analyze content and
maybe modify very few words or characters. Mod
W dniu 29.12.2020 o 18:54, Paul Gilmartin pisze:
On Tue, 29 Dec 2020 18:12:06 +0100, R.S. wrote:
1. Yes, maybe I described it incorretly.
Regarding your question - yes I need something like
convert ifile ofile [-tablefile]
Just byte to byte translation. No CR/LF issues, no record boundaries
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
Behalf Of R.S.
Sent: Tuesday, December 29, 2020 5:30 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: EBCDIC-ASCII converter and other tools
1. I'm looking for some simple tool for conversion EBCDIC to ASCII and
vice versa.
Unfortu
2020 at 7:30 AM R.S. wrote:
1. I'm looking for some simple tool for conversion EBCDIC to ASCII and
vice versa.
Unfortunately it has to run under Windows.
Requirements:
Run under Windows, preferrably in batch mode (command line interface)
Custom-defined tables of conversion
2. I'm looking for a
W dniu 29.12.2020 o 15:20, Lennie Dymoke-Bradshaw pisze:
For the first requirement I was going to recommend SVC 103 but maybe that
doesn't run under windows.
Where does the second utility have to run?
Windows also.
Yes, on z/OS side there would be not a problem - everything is available
in
1. I'm looking for some simple tool for conversion EBCDIC to ASCII and
vice versa.
Unfortunately it has to run under Windows.
Requirements:
Run under Windows, preferrably in batch mode (command line interface)
Custom-defined tables of conversion
2. I'm looking for a tool similar to IDCAMS
W dniu 23.12.2020 o 03:41, Munif Sadek pisze:
I have been struggling to install RHEL 8.3 on a native HMC LPAR (Z14). My CPC
is with multiple IFLs and I have configured couple of LPARs with Linux, 16 GB
memory and with both Dedicated and non Dedicated IFLs but my Load from REMOTE
MEDIA server
W dniu 23.12.2020 o 00:35, John McKown pisze:
On Tue, Dec 22, 2020 at 5:26 PM Gibney, Dave wrote:
WindowsJob...Huh
Right. I am so ignorant, perhaps the Windows (and Linux?) world doesn't
even have any unattended scheduled activities. I know that there is a
"Windows Scheduler" that can
osity: why did you choose RMODE(64)?"
Hey man - its the way of the future!
Joe
On Mon, Dec 21, 2020 at 9:38 AM R.S. wrote:
W dniu 21.12.2020 o 16:19, Ed Jaffe pisze:
On 12/21/2020 6:27 AM, Paul Gilmartin wrote:
On Sun, 20 Dec 2020 21:14:21 -0800, Ed Jaffe wrote:
There are many,
W dniu 21.12.2020 o 14:30, R.S. pisze:
Thank you for the information. I appreciate it.
BTW: Is there description/list of COBOL versions anywhere?
I mean z/OS family, something like
Enterprise COBOL 6.3 year
Enterprise COBOL 6.2 year
Enterprise COBOL 5.x year
Enterprise COBOL 4.x year
W dniu 21.12.2020 o 16:19, Ed Jaffe pisze:
On 12/21/2020 6:27 AM, Paul Gilmartin wrote:
On Sun, 20 Dec 2020 21:14:21 -0800, Ed Jaffe wrote:
There are many, Many, MANY restrictions!
Are these listed anywhere? For code or for data? Services calls?
Citation needed.
I was referring
How to get list of available APPLIDs?
I mean
LOGON APPLID=applidname
--
Radoslaw Skorupka
Lodz, Poland
==
Jeśli nie jesteś adresatem tej wiadomości:
- powiadom nas o tym w mailu zwrotnym (dziękujemy!),
- usuń trwale tę
ps://www-01.ibm.com/common/ssi/cgi-bin/ssialias?appname=skmwww=897%2FENUS290-529=AN=service%20initializer=ibmsearch_a=CA
Joe
On Mon, Dec 21, 2020 at 7:10 AM R.S. wrote:
W dniu 15.12.2020 o 10:19, Peter pisze:
Hello
Does anyone have a copy of Progam directory AD/Cycle C/370 1.2 ?
I don't fin
W dniu 15.12.2020 o 10:19, Peter pisze:
Hello
Does anyone have a copy of Progam directory AD/Cycle C/370 1.2 ?
I don't find the installation manual over web might be due to backlevelled
Any pointers ?
Just curious: What was "AD/Cycle"?
I'm aware the above can be found in old compiler names,
DB2 v12 introduced new Insert Algorithm 2 (IAG2), which was the topic of
Red Alert and the recommendation was to disable it.
Question: is it fixed somehow or the recommendation is still valid?
--
Radoslaw Skorupka
Lodz, Poland
W dniu 09.12.2020 o 22:58, Frank Swarbrick pisze:
I have downloaded and installed in my personal z/OS Unix directory curl and a few other
z/OpenSource tools from Rocket Software. I have asked my z/OS security guy if we can go ahead and
have our systems group (outsourced to IBM zCloud)
W dniu 09.12.2020 o 20:02, Paul Gilmartin pisze:
On Wed, 9 Dec 2020 19:31:34 +0100, R.S. wrote:
...
I perceived aversion to RECEIVE FROMNTS as UNIXphobia. Our product
was not so large that DASD space was a concern. Can't please everyone.
Gil,
Don't kill messenger ;-)
Was that statement
W dniu 09.12.2020 o 19:14, Paul Gilmartin pisze:
On Wed, 9 Dec 2020 18:25:19 +0100, R.S. wrote:
...
For blank new installations - download (or order media) DVD images of
Driver system and put it into DVD drive in HMC... Well... there is no
longer DVD drive... However you can put DVD content
W dniu 09.12.2020 o 18:52, Kenneth J. Kripke pisze:
Hello;
We have upgraded from a Z14 to Z15 processor, and, have experienced
something curious regarding the SMF TYPE 30 section being generated for
Connect Direct as well as Tibco's MFT 8.0 file transfer products.
Both products are
W dniu 09.12.2020 o 17:05, Farley, Peter x23353 pisze:
OTOH, quantum computing (or its successor(s)) may change the paradigm entirely
and moot any 64 vs 128 bit issues because qubits are so different from bits.
Well...
I remember stories about IPv6 addressing. It is much more capacious than
W dniu 09.12.2020 o 02:41, Paul Gilmartin pisze:
On Wed, 9 Dec 2020 00:48:31 +, Seymour J Metz wrote:
You needed an MVS driver system to install MVS/XA. Most customers already had
an existing MVS/SP system, and didn't need to order the starter system. IPO and
PSO were available later.
W dniu 04.12.2020 o 19:16, Tony Thigpen pisze:
We have never been able to use the edit function unless we were
directly on the HMC. Using it remotely via the web produces the same
results you are seeing.
I get around it by ftping the config to a small mini-ftp box then
accessing the FTP box
Do you mean HMC (HMA) reboot or just physical machine reboot?
According my understanding you can reboot HMC and it is independent from
SE reboot since both are separate virtual objects (virtual machines). Of
course reboot of physical machine affect all virtual objects/machines
under.
BTW: I
W dniu 27.11.2020 o 14:35, Peter Relson pisze:
It seems reasonable that it would in a real sysplex.
This question and the original post make it sound like the poster's system
was not in a sysplex.
The display showed that it is in a sysplex. Is that not a "real sysplex"?
My understanding:
reen but there is
marker sign "not this one", etc. etc.
Ridiculous? Well, my colleague used diskettes in that way. No, instead
of stickers he used pencil and coffee stains to identify. Was it
working? NO!
--
Radoslaw Skorupka
Lodz, Poland
W dniu 22.11.2020 o 03:57, Paul Gilmartin pisze:
IMHO it was the same error as nowadays: bad naming.
I didn't work with removable DASD, but I worked with physically
removable, human-operated tapes. And it was administrator responsibility
to have proper naming convention and unique volume serials. Exceptions
in justified scenarios only.
Of
> Q:
> is it non-disruptive or disruptive when massaging the Weight & number of
> Processors if do as follows?
In general it is non-disruptive. However big change, let's say from 75% to 5%
can be very troublesome.
- the Weight value: from HMC(2.14.1)>click on a CEC level>Operational
W dniu 20.11.2020 o 18:01, Paul Gilmartin pisze:
On Fri, 20 Nov 2020 16:47:58 +, Seymour J Metz wrote:
However what If I would like to make the record size larger I might get a s0c4
possibly
QSAM doesn't allow changing the record length and BSAM doesn't allow changing
the block size
W dniu 20.11.2020 o 20:19, Farley, Peter x23353 pisze:
A colleague asked me today if there was an error in SDSF because from his ISPF
/ SDSF DA screen he can see all active jobs with selected names (e.g., using
PREFIX or a SELECT command) across the entire SYSPLEX.
However, using his ISPF /
W dniu 20.11.2020 o 19:00, Steve Lee pisze:
Hi,
Is there a separate ListSever for the IO Configuration(and HMC tool included)
as an example of RACF-L server?
Or IBM-MAIN has been covered these items?
This is proper list.
What problems do you have?
We will try to help.
(proud author of HCD
W dniu 20.11.2020 o 03:08, Steve Lee pisze:
Dear,
These messages come out at the time of IPL in past few IPL cycle;
IEA213A DUPLICATE VOLUME 'RP@C03' FOUND ON DEVICES 3404 AND 4802.
IEA213A REPLY DEVICE NUMBER WHICH IS TO REMAIN OFFLINE
IEA213A DUPLICATE VOLUME 'RP@C04' FOUND ON DEVICES 3405
W dniu 19.11.2020 o 22:13, David Spiegel pisze:
Hi Radek,
After I sent it, I realized that I addressed you incorrectly. Sorry.
No problem at all. I just suspected there is some meaning of such
sentence which I don't understand. Curiosity - that's all.
Regards
--
Radoslaw Skorupka
Lodz,
W dniu 19.11.2020 o 21:46, Wayne Bickerdike pisze:
Charles,
I like Bobby Herring's solution. We use similar commands combined with
automation at one customer.
AUTO is very, very easy to install.
It uses a PDS with this syntax : @2230
At 2230, it does whatever is in the member with a day
W dniu 19.11.2020 o 21:48, David Spiegel pisze:
Hi Skip,
"... That means your job may contain DD * statements, etc. ..."
As of z/OS 1.13, Cataloged Procedures can have DD *
Yes, I wanted to say that as well, but simply forgot. There are also new
features in JCL since z/OS 2.1, which I didn't
W dniu 19.11.2020 o 00:00, Charles Mills pisze:
Is there a JES2 command to submit a job from a PDS or PROCLIB, roughly
analogous to TSO SUBMIT?
I want to run a predefined job, unmodified, once a day. (No, I don't have a
real scheduler.) I figured I could do something with $T A,I=86400,'command'
W dniu 17.11.2020 o 01:57, Wayne Bickerdike pisze:
Atlas rang a bell and then I remembered it was used at the Rutherford labs
in Chilton.
I worked at AERE (Atomic Energy Research Establishment) which was next
door. They were basically the same campus but AERE was secure and
Rutherford wasn't.
W dniu 17.11.2020 o 16:53, Tim Hare pisze:
I have some code that follows a control block chain to the HCCT to get the JES2
node name, but that requires going to key zero (or so the source says, it's
been years ). Is there a way to retrieve the JES2 node name in a program
running in batch,
W dniu 17.11.2020 o 05:15, Peter pisze:
Hello,
I am just trying to understand on how new pool of volume is created in DS8K
box , then what values are shared from DS8K with zOS system programmer to
the newly created LCU in IODF ?
Does the newly added DASD UCB needs a POR or just soft activation
As a old computer hobbyist I've collected (very) few pictures of TR 4.
Wooden parts of cabinets, construction similar to contemporary 19" racks.
Nice machine, part of IT history.
--
Radoslaw Skorupka
Lodz, Poland
==
Jeśli
W dniu 12.11.2020 o 14:33, Seymour J Metz pisze:
There's nothing special about TSO; HLQ=userid is handled the same way in batch,
STC and TSO.
Yes, that's correct. My mistake.
Corrected version below.
Few points:
1. In MVS world there is no concept of file ownership like in Unix.
2.
W dniu 06.11.2020 o 22:43, Frank Swarbrick pisze:
In the Unix world one can use chmod (change mode) on their own files to make it
so non-superusers cannot view a particular file. Is there anything similar for
MVS data sets?
Few points:
1. In MVS world there is no concept of file ownership
weak knowledge about ISPF and Edit.
--
Radoslaw Skorupka
Lodz, Poland
W dniu 05.11.2020 o 16:44, Mike Schwab pisze:
Step 1 I would put the default CLASS= in every job. Easier to change
the default than add a new line.
On Thu, Nov 5, 2020 at 6:09 AM R.S. wrote:
Now we know more. Ma
W dniu 05.11.2020 o 20:01, retired mainframer pisze:
-Original Message-
From: IBM Mainframe Discussion List On
Behalf Of R.S.
Sent: Thursday, November 05, 2020 4:20 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: JES2 Policies
Joe,
And I'm pretty sure no business department is interested
ehind it."
Thats not your call to make. They are entitled to run their business how
they see fit.
Joe
On Thu, Nov 5, 2020 at 5:53 AM R.S. wrote:
W dniu 04.11.2020 o 19:50, Lizette Koehler pisze:
Can RACF see the account code and make a decision?
Obviously not. RACF is also unable to see
n around a long time, and is very mature...
Joe
On Wed, Nov 4, 2020 at 8:20 AM R.S. wrote:
W dniu 04.11.2020 o 13:10, Gadi Ben-Avi pisze:
Hi,
I've started looking into JES2 Policies.
The current goal is to change a job's class or service class
depending
on certain values in the accounting informa
W dniu 04.11.2020 o 19:50, Lizette Koehler pisze:
Can RACF see the account code and make a decision?
Obviously not. RACF is also unable to see submitters trousers, check how
many days left to nearest holiday, etc.
That is what (as I understand it) the initial requirement is.
Yes, that
W dniu 04.11.2020 o 19:29, Lizette Koehler pisze:
[...]
I worked in a shop with over 500 exits in JES2/zOS/Vtam etc... Each upgrade
took longer to do - basically do to validation of the code. One upgrade we
decided to reduce that down and let the system perform its own functions. Went
. Luckily its easy to find IBM
announcement letters
On Wed, Nov 4, 2020 at 3:05 AM R.S. wrote:
This is about IBM software licensing.
For OTC there are VUE - Value Unit Exhibits.
There some non-linear relationship between MSU and VUE number, but there
are several VUE's and the same machine have 300
es. So,
if they code a CLASS=X, but the account info says that they dont have
access to CLASS=X, then dump the job.
OP: This has been around a long time, and is very mature...
Joe
On Wed, Nov 4, 2020 at 8:20 AM R.S. wrote:
W dniu 04.11.2020 o 13:10, Gadi Ben-Avi pisze:
Hi,
I've started lookin
W dniu 04.11.2020 o 13:10, Gadi Ben-Avi pisze:
Hi,
I've started looking into JES2 Policies.
The current goal is to change a job's class or service class depending on
certain values in the accounting information.
>From reading the manual, it seems that this is possible.
Has anyone done
W dniu 03.11.2020 o 20:36, Roger Lowe pisze:
On Tue, 3 Nov 2020 19:44:52 +0100, R.S. wrote:
Yes, I know this tool, I have it on my PC desktop, this is good for
MSU->VUE calculations, but it say nothing about which VUE is assigned to
given product.
Note: I'm focusing about MSU-
BM Z mainframes.
www.ibm.com
Regards
Parwez Hamid
From: IBM Mainframe Discussion List on behalf of R.S.
Sent: 03 November 2020 16:05
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: VUE - how to find it?
This is about IBM software licensing.
For OTC there are VUE - Valu
, but at our site db2 CICS and MQ all had
VUE options
Chris Hoelscher
Lead Sys DBA
IBM Global Technical Services on assignmemt to Humana Inc.
T 502.476.2538 or 502.407.7266
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of R.S.
Sent: Tuesday, November 3, 2020 11:05 AM
This is about IBM software licensing.
For OTC there are VUE - Value Unit Exhibits.
There some non-linear relationship between MSU and VUE number, but there
are several VUE's and the same machine have 300 VUE007, but 350 VUE008,
etc. (Number are examples only).
Now it time for the question:
W dniu 31.10.2020 o 00:40, Joe Monk pisze:
Radoslaw,
He is asking about shareoption (4 x) not (x 4) aka cross-region sharing,
not cross-system sharing.
In VSE, Shareoption(4) allows vsam file sharing among partitions (similar
to a z/os address space). VSE manages that automatically, for the
W dniu 30.10.2020 o 23:51, Tony Thigpen pisze:
All,
I have a z/VSE client that believes it is time to move to z/OS. But,
they have one big concern. They have a lot of ShareOption=4 VSAM files.
For those that don't know it, ShareOption=4 files on z/VSE "work out
of the box" without any need
W dniu 28.10.2020 o 18:25, Jesse 1 Robinson pisze:
Radoslaw, I would be happy to have you as my teacher.
You are very kind, thank you.
In fact I really love teaching.
IMHO this is crucial - when you do what you like, usually you do it well.
I was teaching maths, physics, chemistry, and
W dniu 28.10.2020 o 17:52, Charles Mills pisze:
I have two z/OS systems joined by a real fast TCP connection. (They're
actually two guests on the same VM, but seeing as how I have relatively
little knowledge or authority on the VM side of things it may be simpler to
just think of them as two
W dniu 28.10.2020 o 18:00, Paul Gilmartin pisze:
On Wed, 28 Oct 2020 16:09:27 +, Frank Swarbrick wrote:
Load module or program object should be easy: executable, or binary executable.
Does this include "executable" residing in a UNIX directory? Must this be
further clarified, perhaps to
Executable - that could mean REXX or CLIST.
In fact people usually say:
load module - nevermind what is proper name of member/program in PDSE
binary - could be ambiguous
binary program - better a little
EXE files/members - just analogy to PC-DOS or Windows world
compiled program - one could
W dniu 27.10.2020 o 22:17, Frank Swarbrick pisze:
Is there a standard "generic" name for PDS/PDSE? Is it "PDS(E)"? Or maybe something like
"MVS library" or "MVS dataset library"?
Just wondering.
Unfortunately no.
There are some names, but no "the only standard".
Some names in use:
PDS -
W dniu 27.10.2020 o 18:16, Gibney, Dave pisze:
A fairly quick question. Are there sample ICEPRMxx members provided by IBM
for tailoring DFSORT? I don't find any in SICESAMP.
Yesterday, in my sandbox, I IPL'd with SICELPA, SORTLPA, SICELINK, SORTLIB
ahead of the SYNCSORT libraries and not
W dniu 26.10.2020 o 18:14, Charles Mills pisze:
No. The OP did not specify TSO (or any other subsystem). The OP wrote "I would like
to fetch a user's logon history like when he was logged with all time intervals."
I have no time to check it, so I may be wrong, but I believe every logon
cut
Yes, obviously!
But ...no.
To explain: there is an option in RACF, called GRPLIST. Vast majority of
installations use GRPLIST, but few use NOGRPLIST.
1. YES
For NOGRPLIST you may belong to meny group, but only one connection at
the time is "active" - that means you logon as Frank, FRANK1
ocumentation-reading.
Charles
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of R.S.
Sent: Saturday, October 24, 2020 11:47 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: SMF to capture user login history
The answer is IRRADU00 report - stand
W dniu 25.10.2020 o 14:44, Peter Relson pisze:
BTW2: I even experienced F37 abend in the past. It was related to huge
(at the time) Jaguar J1A tapes and good compression and ...problems in
RMM. AFAIK I put over 6TB (terabytes) of uncompressed data on 300GB cart.
Interesting. That completion
The answer is IRRADU00 report - standard (free) RACF tool.
Then you can write yoour own report.
--
Radoslaw Skorupka
Lodz, Poland
==
Jeśli nie jesteś adresatem tej wiadomości:
- powiadom nas o tym w mailu zwrotnym
1 - 100 of 1921 matches
Mail list logo
