Dear list:
We are planning to establish a NJE connection between two different NETIDs
sites in SNA and reviewing the steps we faced in one point related to the
definition of the NODE.
My initial understanding is that we have to configure (to add) in my JES2
configuration the following
Dear list:
I'd like to know how to stop the AXR address space without using the CANCEL
command??
I already tried with STOP but it didn't work.
Any clues??
Thanks in advance for any help.
Regards,
Gilson
--
For IBM-MAIN
>
>Dear list:
Does anyone know the meaning of Notify Type= Hyper DEL in apar??
I have received a notification today but I could not find the meaning of thid
Notify Type.
Thanks for any help.
Regards,
Gilson
--
For IBM-MAIN
Dear list:
I'd like to know if there is a way to configure a line (Lx.ST1) to select
different sizes of sysouts (size in terms of lines) when starting a connection.
I know that after a connection have been stablished, you can change the options
LIMIT and WS on order to have the following:
Dear list:
We have to route some sysouts in the JES2 spool for two different nodes. Is
there a way to do it automatically?
Regards,
Gilson
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
to be passed
through the command, would solve the problem.
Thanks,
Gilson
Enviado de myMail para iOS
quinta-feira, 24 de agosto de 2017 20:48 -0300 de
000433f07816-dmarc-requ...@listserv.ua.edu
<000433f07816-dmarc-requ...@listserv.ua.edu>:
>On 2017-08-24, at 17:30, Gilson
Dear list:
I'd like to hear from this group, which way we have to follow in order to add
in RACF the root chain from external partners that have encrypted connections
but using self signed certificate.
I will describe the three ways we have imported the root chain:
1- Add the
Dear list:
We are facing some alerts related to shortage of Console Message Buffers due
to an automation that change and route sysouts from one site to another. This
automation, when there are a lot of sysouts, generates a lot of HASP686
messages.
In order to fix the issue we have two
Dear list:
We have configured an NJE connection using the following statements in JES2
PARM:
APPL(APPL01) NODE=31
CONNECT NODEA=1,MEMBA=1,NODEB=31,MEMBB=1
N(31) NAME=NODE01,PATHMGR=YES,CONNECT=(YES,30)
In VTAMLST we have the following definitions:
VBUILD TYPE=CDRSC
Dear list:
I'm looking for a process to list the nodes we have defined in
Connect:Direct using Secure Plus in order to check the encryption mode for each
node when applicable.
I need the process in batch. Online I already know that is possible but the
result is a lista of nodes and I
We are upgrading our boxes from zEC12 to z13.
One of the interfaces we have been using is Hipersocket and for z/13, manuals
say that for Hipersocket, the VCHID (Virtual Channel Id) should be at the range
of 7E0-7FF.
We have used CHPID Mapping Tools and the IODF generated for this channel set
Dear list:
We are facing some issues related to the address space CFZCIM on z/OS V2R3.
For some reason we could not find, the CPU consumption reached thresholds for
a period of time where the service was not in use.
Does anyone here have any experience and similar issues related to
Dear list:
I'd like to know if DFSORT makes use of zIIP as SYNCSORT does.
Please do not consider DFSORT with DB/2 utilities where zIIP is used.
If anyone could help I really appreciate that.
Thanks !!
Regards,
Gilson
Dear list:
Follow the results using DFSORT:
ICE250I 0 VISIT http://www.ibm.com/storage/dfsort FOR DFSORT PAPERS, EXAMPLES
AND MORE
ICE000I 0 - CONTROL STATEMENTS FOR 5650-ZOS, Z/OS DFSORT V2R3 - 06:00 ON SUN
SEP 22, 2019 -
OPTION COPY
Hello:
We have migrated our sort from SYNCSORT to DFSORT and we are facing issues
related to syntax in the following situation:
in SYNCSORT:
OPTION COPY
OUTFIL FNAMES=SORTOUT,REMOVECC,INCLUDE=(1,1,CH,EQ,C'1'),
Hello:
Does anyone know how to restrict the option to purge sysouts in JES2 Spool
through TSO (SDSF) but only the jobs which the user is the owner?
We have profiles in OPERCMDS class like JES2.CANCEL.BAT and we would like to
restrict the purge option only for sysouts generated by userA.
Hello:
We have the following situation when trying to activate and IPL 3
lpars from site A into site B.
Both sites are distant about 450 Km and the storage replication is made by
Global Metro Mirror.
The issue we have faced last weekend is related to match the IODF we have
received
We are running NDM 5.2 on z/Os V2.4 with no issues. It's about 45 days and no
issues, abends, etc.
-Mensagem original-
De: IBM Mainframe Discussion List Em nome de
Burrell, Todd
Enviada em: quinta-feira, 30 de julho de 2020 14:07
Para: IBM-MAIN@LISTSERV.UA.EDU
Assunto: NDM 5.2 on z/OS
Dear colleagues:
I'd like to know if is it possible to use OSA Express 1000 Base T
with the two ports (0 and 1) for console but in different sub-networks ?
For instance I have an OSA where in port 0 I will define it for
network 192.168.10.100/16
And for port 1 I will
Dear list:
I'd like to know if someone have migrated the Session Manager from
Netview Access to CL/Supersession.
We are starting to do it and I could not find if there is a process to
migrate in order to keep the groups defined in RACF for Access to be used in
CL/Supersession.
em: terça-feira, 2 de fevereiro de 2021 17:06
Para: IBM-MAIN@LISTSERV.UA.EDU
Assunto: Re: OSA Express 7S 1000 base T as console
On Feb 2, 2021, at 12:32 PM, Gilson Cesar de Oliveira
wrote:
>
> For instance I have an OSA where in port 0 I will define it for
> network 192.168.
Em sex., 13 de ago. de 2021 às 10:31, Seymour J Metz
escreveu:
> Where is the S0C9? Has the batch job completed? What is in the ALLOC and
> what are the TUs of the DYNALLOC?
>
>
> --
> Shmuel (Seymour J.) Metz
> http://mason.gmu.edu/~smetz3
>
>
> From:
Mark:
Here in Brazil we have configured CLSS 3.1 to replace Netview Access.
It is working as expected but there are some difference if you compare
with Netview Access.
I have to get most of the configuration steps in manuals.
If you need information on how to do
Dear list,
We are planning to enable Security in Connect Direct for
external partners and we can see, as far as I understood, three options:
1. Enable Security exit and define all the external userids to
authenticate using this exit with interface to RACF;
2. Create
We are upgrading COnnect Direct for z/Os at version 4.8 to 5.1 (this is the
first step to upgrade to version 6.2) and we are facing issues for some
processes when using the new version of the loadlib of Connect Direct.
SCIB006I SIGNON COMMAND (CONDENSED) => USERID /NODE =
itten exit program was not found in an
> authorized
> library.
>
> Richard
>
>
> -Original Message-
> From: IBM Mainframe Discussion List On Behalf
> Of Gilson Cesar de Oliveira
> Sent: Monday, August 28, 2023 2:18 PM
> To: IBM-MAIN@LISTSERV.
Hi Kolusu,
Thanks for your reply.
Regarding the the dataset where I Have both modules (exits), it’s
authorized. The most strange is that for some processes work with no
issues. For other we have the errors.
We’d like to understand why it’s happening.
If you have any idea on why this is happening
Many Thanks John!!
Tomorrow morning I will change the configuration as described in the text
and we will hope everything is going to be ok!
Gilson
Em dom., 22 de mai. de 2022 às 19:35, John S. Giltner, Jr.
escreveu:
> Should work, that is a generic way of disabling OPTIONS for Apache in any
>
Hi,
When you have a community defined as "public" you are exposed for
some kind of Security Issues and my question is related to it:
If you change the community name from public to anything else
different from this, who will be affected other than Networking monitoring
Servers
Hi list,
I´m facing an issue related to remove ciphers from SSH
configuration.
When you execute ssh -Q cipher I can see the list with the
ciphers and I´d like to remove some of them
From my understanding all I have to do is the following:
Dear list,
We are implementing password phrase but not for all lpars at
the same time.
We are using SuperSession 3.1 but from the application menu
there will be applications running on lpars with no support for password
phrase (ex. TSO).
Hi List,
I’ve been researching a way to disable OPTIONS for http server for z/OS in
Apache.
I’ve found an article on this site but is related to i System not for z system.
https://www.ibm.com/support/pages/disabling-options-method-apache-24-http-server
Does anyone of you know if this solution
Hi everyone,
We are facing some issues regarding IWS Agent for z/OS where we have
to configure HTTPOPTS but for this option there is no way to restrict the
encryption protocol for TLSv1.2 only.
All they have available to configure are the following:
Hi Timothy,
Many thanks for your help.
In the second URL there is an information about how to setup TLSV1.2
but we also need to restrict the ciphers to the ones our customer would like
to have enabled.
I´m still looking for on how to restrict the ciphers.
If you
Hi Tim and Colin,
Many thanks for your prompt help.
I´ll work with the team who owns the IWS in order to implement these
configurations and test them before the roll-out.
If it works I´ll post the results here for the list.
Regards,
Gilson
-Original
Hi everyone,
I´m starting to work with Infoprint and I´m facing the following:
I have to change the hostname (IP Address) of a printer and I´m
doing it through TSO interface. After I´ve changed the hostname field it
returns a msg saying that the change was updated.
When I
Hi everyone,
I´d like to know if someone from this group have details about this
software (HELIX MARS).
We have a new customer using it but there is nobody who knows the
details about it.
This customer is facing issues related to transfer data using MARS for
huge file
37 matches
Mail list logo