[Kernel-packages] [Bug 1794232] Missing required logs.
This bug is missing log files that will aid in diagnosing the problem. While running an Ubuntu kernel (not a mainline or third-party kernel) please enter the following command in a terminal window: apport-collect 1794232 and then change the status of the bug to 'Confirmed'. If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'. This change has been made by an automated script, maintained by the Ubuntu Kernel Team. ** Changed in: linux (Ubuntu) Status: New => Incomplete ** Tags added: bionic -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1794232 Title: Geneve tunnels don't work when ipv6 is disabled Status in linux package in Ubuntu: Incomplete Bug description: [Impact] When attempting to create a geneve tunnel on Ubuntu 16.04 Xenial, in an OS environment with open vswitch, where ipv6 has been disabled, the create fails with the error : “ovs-vsctl: Error detected while setting up 'geneve0': could not add network device geneve0 to ofproto (Address family not supported by protocol)." [Test Case] (Best to do this on a kvm guest VM so as not to interfere with your system's networking) 1. On any Ubuntu Xenial kernel, disable ipv6. This example is shown with the4.15.0-23-generic kernel (which differs slightly from 4.4.x in symptoms): - Edit /etc/default/grub to add the line: GRUB_CMDLINE_LINUX="ipv6.disable=1" - # update-grub - Reboot 2. Install OVS # apt install openvswitch-switch 3. Create a Geneve tunnel # ovs-vsctl add-br br1 # ovs-vsctl add-port br1 geneve1 -- set interface geneve1 type=geneve options:remote_ip=192.168.x.z (where remote_ip is the IP of the other host) You will see the following error message: "ovs-vsctl: Error detected while setting up 'geneve1'. See ovs-vswitchd log for details." From /var/log/openvswitch/ovs-vswitchd.log you will see: "2018-07-02T16:48:13.295Z|00026|dpif|WARN|system@ovs-system: failed to add geneve1 as port: Address family not supported by protocol" You will notice from the "ifconfig" output that the device genev_sys_6081 is not created. If you do not disable IPv6 (remove ipv6.disable=1 from /etc/default/grub + update-grub + reboot), the same 'ovs-vsctl add-port' command completes successfully. You can see that it is working properly by adding an IP to the br1 and pinging each host. On kernel 4.4 (4.4.0-128-generic), the error message doesn't happen using the 'ovs-vsctl add-port' command, no warning is shown in ovs-vswitchd.log, but the device genev_sys_6081 is also not created and ping test won't work. [Other Info] * Analysis Geneve tunnels should work with either IPv4 or IPv6 environments as a design and support principle. Currently, however, what's in the implementation requires support for ipv6 for metadata-based tunnels which geneve is: rather than: a) ipv4 + metadata // whether ipv6 compiled or dynamically disabled b) ipv4 + metadata + ipv6 What enforces this in the current 4.4.0-x code when opening a Geneve tunnel is the following in geneve_open() : bool ipv6 = geneve->remote.sa.sa_family == AF_INET6; bool metadata = geneve->collect_md; ... #if IS_ENABLED(CONFIG_IPV6) geneve->sock6 = NULL; if (ipv6 || metadata) ret = geneve_sock_add(geneve, true); #endif if (!ret && (!ipv6 || metadata)) ret = geneve_sock_add(geneve, false); CONFIG_IPV6 is enabled, IPv6 is disabled at boot, but even though ipv6 is false, metadata is always true for a geneve open as it is set unconditionally in ovs: In /lib/dpif_netlink_rtnl.c : case OVS_VPORT_TYPE_GENEVE: nl_msg_put_flag(&request, IFLA_GENEVE_COLLECT_METADATA); The second argument of geneve_sock_add is a boolean value indicating whether it's an ipv6 address family socket or not, and we thus incorrectly pass a true value rather than false. The current "|| metadata" check is unnecessary and incorrectly sends the tunnel creation code down the ipv6 path, which fails subsequently when the code expects an ipv6 family socket. * This issue exists in all versions of the kernel upto present mainline and net-next trees. * Testing with a trivial patch to remove that and make similar changes to those made for vxlan (which had the same issue) has been successful. Patches for various versions to be attached here soon. * We are in the process of sending a patch for this upstream once it has completed adequate testing. * Example Versions (bug exists in all versions of Ubuntu and mainline): $ uname -r 4.4.0-135-generic $ lsb_release -rd
[Kernel-packages] [Bug 1794232] [NEW] Geneve tunnels don't work when ipv6 is disabled
Public bug reported: [Impact] When attempting to create a geneve tunnel on Ubuntu 16.04 Xenial, in an OS environment with open vswitch, where ipv6 has been disabled, the create fails with the error : “ovs-vsctl: Error detected while setting up 'geneve0': could not add network device geneve0 to ofproto (Address family not supported by protocol)." [Test Case] (Best to do this on a kvm guest VM so as not to interfere with your system's networking) 1. On any Ubuntu Xenial kernel, disable ipv6. This example is shown with the4.15.0-23-generic kernel (which differs slightly from 4.4.x in symptoms): - Edit /etc/default/grub to add the line: GRUB_CMDLINE_LINUX="ipv6.disable=1" - # update-grub - Reboot 2. Install OVS # apt install openvswitch-switch 3. Create a Geneve tunnel # ovs-vsctl add-br br1 # ovs-vsctl add-port br1 geneve1 -- set interface geneve1 type=geneve options:remote_ip=192.168.x.z (where remote_ip is the IP of the other host) You will see the following error message: "ovs-vsctl: Error detected while setting up 'geneve1'. See ovs-vswitchd log for details." >From /var/log/openvswitch/ovs-vswitchd.log you will see: "2018-07-02T16:48:13.295Z|00026|dpif|WARN|system@ovs-system: failed to add geneve1 as port: Address family not supported by protocol" You will notice from the "ifconfig" output that the device genev_sys_6081 is not created. If you do not disable IPv6 (remove ipv6.disable=1 from /etc/default/grub + update-grub + reboot), the same 'ovs-vsctl add-port' command completes successfully. You can see that it is working properly by adding an IP to the br1 and pinging each host. On kernel 4.4 (4.4.0-128-generic), the error message doesn't happen using the 'ovs-vsctl add-port' command, no warning is shown in ovs-vswitchd.log, but the device genev_sys_6081 is also not created and ping test won't work. [Other Info] * Analysis Geneve tunnels should work with either IPv4 or IPv6 environments as a design and support principle. Currently, however, what's in the implementation requires support for ipv6 for metadata-based tunnels which geneve is: rather than: a) ipv4 + metadata // whether ipv6 compiled or dynamically disabled b) ipv4 + metadata + ipv6 What enforces this in the current 4.4.0-x code when opening a Geneve tunnel is the following in geneve_open() : bool ipv6 = geneve->remote.sa.sa_family == AF_INET6; bool metadata = geneve->collect_md; ... #if IS_ENABLED(CONFIG_IPV6) geneve->sock6 = NULL; if (ipv6 || metadata) ret = geneve_sock_add(geneve, true); #endif if (!ret && (!ipv6 || metadata)) ret = geneve_sock_add(geneve, false); CONFIG_IPV6 is enabled, IPv6 is disabled at boot, but even though ipv6 is false, metadata is always true for a geneve open as it is set unconditionally in ovs: In /lib/dpif_netlink_rtnl.c : case OVS_VPORT_TYPE_GENEVE: nl_msg_put_flag(&request, IFLA_GENEVE_COLLECT_METADATA); The second argument of geneve_sock_add is a boolean value indicating whether it's an ipv6 address family socket or not, and we thus incorrectly pass a true value rather than false. The current "|| metadata" check is unnecessary and incorrectly sends the tunnel creation code down the ipv6 path, which fails subsequently when the code expects an ipv6 family socket. * This issue exists in all versions of the kernel upto present mainline and net-next trees. * Testing with a trivial patch to remove that and make similar changes to those made for vxlan (which had the same issue) has been successful. Patches for various versions to be attached here soon. * We are in the process of sending a patch for this upstream once it has completed adequate testing. * Example Versions (bug exists in all versions of Ubuntu and mainline): $ uname -r 4.4.0-135-generic $ lsb_release -rd Description:Ubuntu 16.04.5 LTS Release:16.04 $ dpkg -l | grep openvswitch-switch ii openvswitch-switch 2.5.4-0ubuntu0.16.04.1 ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: geneve kernel-bug ** Tags added: geneve kernel-bug -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1794232 Title: Geneve tunnels don't work when ipv6 is disabled Status in linux package in Ubuntu: New Bug description: [Impact] When attempting to create a geneve tunnel on Ubuntu 16.04 Xenial, in an OS environment with open vswitch, where ipv6 has been disabled, the create fails with the error : “ovs-vsctl: Error detected while setting up 'geneve0': could not add network device geneve0 to ofproto (Address family not supported by protocol)." [Test Case] (Best to do this on a kvm guest VM so as not to interfere with your system's networking) 1. On any Ubuntu Xenial kernel, disable i
[Kernel-packages] [Bug 1791090] Re: Xorg fails to start with radeon (kernel rejects radeon command stream from Xorg)
This is fixed with x-x-v-ati 1:18.1.0-1 Thanks! ** Changed in: xorg-server (Ubuntu) Status: Incomplete => Fix Released ** Changed in: linux (Ubuntu) Status: Confirmed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1791090 Title: Xorg fails to start with radeon (kernel rejects radeon command stream from Xorg) Status in linux package in Ubuntu: Fix Released Status in xorg-server package in Ubuntu: Fix Released Bug description: The shell fails to start with latest version of xorg and radeon drivers. From the journal: sept. 06 08:06:26 sark /usr/lib/gdm3/gdm-x-session[6404]: (II) RADEON(0): Setting screen physical size to 508 x 285 sept. 06 08:06:26 sark /usr/lib/gdm3/gdm-x-session[6404]: radeon: The kernel rejected CS, see dmesg for more information (-22). sept. 06 08:06:26 sark kernel: radeon :01:00.0: evergreen_cs_track_validate_texture:855 texture bo too small (layer size 8847360, offset 0, max layer 1, depth 1, bo size 4096) (1920 1152) sept. 06 08:06:26 sark kernel: [drm:radeon_cs_ioctl [radeon]] *ERROR* Invalid command stream ! The shell starts normally under wayland. Downgrading the following packages fixed the problem: xserver-xorg-video-qxl:amd64 (0.1.5-2build2, 0.1.5-2build1) xserver-xorg-video-vesa:amd64 (1:2.4.0-1, 1:2.3.4-1build3) xserver-xorg-video-amdgpu:amd64 (18.0.1-1build1, 18.0.1-1) xserver-xorg-core:amd64 (2:1.20.1-1ubuntu1, 2:1.19.6-1ubuntu4) xserver-xorg-video-fbdev:amd64 (1:0.5.0-1, 1:0.4.4-1build6) xserver-xorg-video-intel:amd64 (2:2.99.917+git20171229-1build1, 2:2.99.917+git20171229-1) xserver-xorg-video-vmware:amd64 (1:13.3.0-2build1, 1:13.2.1-1build1) xserver-xorg-video-ati:amd64 (1:18.0.1-1build1, 1:18.0.1-1) xserver-xorg-video-radeon:amd64 (1:18.0.1-1build1, 1:18.0.1-1) ProblemType: Bug DistroRelease: Ubuntu 18.10 Package: xserver-xorg 1:7.7+19ubuntu8 ProcVersionSignature: Ubuntu 4.17.0-9.10-generic 4.17.17 Uname: Linux 4.17.0-9-generic x86_64 ApportVersion: 2.20.10-0ubuntu9 Architecture: amd64 CompizPlugins: [core,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepoll,resize,place,move,wall,grid,regex,imgpng,session,gnomecompat,animation,fade,unitymtgrabhandles,workarounds,scale,expo,ezoom,unityshell] CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Thu Sep 6 15:03:11 2018 DistUpgraded: 2018-03-24 15:02:43,050 DEBUG Running PostInstallScript: './xorg_fix_proprietary.py' DistroCodename: cosmic DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Juniper XT [Radeon HD 5770] [1002:68b8] (prog-if 00 [VGA controller]) Subsystem: PC Partner Limited / Sapphire Technology Juniper XT [Radeon HD 5770] [174b:1482] InstallationDate: Installed on 2014-07-15 (1514 days ago) InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Alpha amd64 (20140520) MachineType: Gigabyte Technology Co., Ltd. GA-890GPA-UD3H ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.17.0-9-generic root=UUID=0889d734-ea91-4bdb-9d16-2a0a923ad3d1 ro quiet splash vt.handoff=1 SourcePackage: xorg UpgradeStatus: Upgraded to cosmic on 2018-03-24 (165 days ago) dmi.bios.date: 07/23/2010 dmi.bios.vendor: Award Software International, Inc. dmi.bios.version: FD dmi.board.name: GA-890GPA-UD3H dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.type: 3 dmi.chassis.vendor: Gigabyte Technology Co., Ltd. dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrFD:bd07/23/2010:svnGigabyteTechnologyCo.,Ltd.:pnGA-890GPA-UD3H:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnGA-890GPA-UD3H:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr: dmi.product.name: GA-890GPA-UD3H dmi.sys.vendor: Gigabyte Technology Co., Ltd. version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.93-1 version.libgl1-mesa-dri: libgl1-mesa-dri 18.1.5-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx 18.1.5-1ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.19.6-1ubuntu4 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.6-1 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:18.0.1-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20171229-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau N/A To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1791090/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1794230] [NEW] failed to load kdump kernel
Public bug reported: Steps: 1) In VMWare ESXi create VM with OS Ubuntu 18.04.1 LTS. 2) In Ubuntu compiled and installed Xen 4.11.1~pre.20180911.5acdd26fdc+dfsg-1~exp1 3) Next installed kexec-tools 2.0.16 and kdump-tools 1.6.3-2 4) In /etc/default/grub.d/kdump-tools.cfg change crashkernel value to 512M 5) update-grub 6) reboot After reboot i try check status: sudo service kdump-tools status And get: ● kdump-tools.service - Kernel crash dump capture service Loaded: loaded (/lib/systemd/system/kdump-tools.service; enabled; vendor preset: enabled) Active: active (exited) since Tue 2018-09-25 05:06:10 UTC; 34s ago Process: 1046 ExecStart=/etc/init.d/kdump-tools start (code=exited, status=0/SUCCESS) Main PID: 1046 (code=exited, status=0/SUCCESS) сен 25 05:06:09 ptms-all-qa7 systemd[1]: Starting Kernel crash dump capture service... сен 25 05:06:09 ptms-all-qa7 kdump-tools[1046]: Starting kdump-tools: * Creating symlink /var/lib/kdump/vmlinuz сен 25 05:06:09 ptms-all-qa7 kdump-tools[1046]: * Creating symlink /var/lib/kdump/initrd.img сен 25 05:06:09 ptms-all-qa7 kdump-tools[1046]: Memory for crashkernel is not reserved сен 25 05:06:09 ptms-all-qa7 kdump-tools[1046]: Please reserve memory by passing"crashkernel=X@Y" parameter to kernel сен 25 05:06:09 ptms-all-qa7 kdump-tools[1046]: Then try to loading kdump kernel сен 25 05:06:09 ptms-all-qa7 kdump-tools[1046]: * failed to load kdump kernel сен 25 05:06:10 ptms-all-qa7 kdump-tools[1347]: failed to load kdump kernel сен 25 05:06:10 ptms-all-qa7 systemd[1]: Started Kernel crash dump capture service. Log says "Memory for crashkernel is not reserved", but if run: sudo cat /proc/iomem | grep Crash I get: 1800-37ff : Crash kernel What to do? ** Affects: kexec-tools (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to kexec-tools in Ubuntu. https://bugs.launchpad.net/bugs/1794230 Title: failed to load kdump kernel Status in kexec-tools package in Ubuntu: New Bug description: Steps: 1) In VMWare ESXi create VM with OS Ubuntu 18.04.1 LTS. 2) In Ubuntu compiled and installed Xen 4.11.1~pre.20180911.5acdd26fdc+dfsg-1~exp1 3) Next installed kexec-tools 2.0.16 and kdump-tools 1.6.3-2 4) In /etc/default/grub.d/kdump-tools.cfg change crashkernel value to 512M 5) update-grub 6) reboot After reboot i try check status: sudo service kdump-tools status And get: ● kdump-tools.service - Kernel crash dump capture service Loaded: loaded (/lib/systemd/system/kdump-tools.service; enabled; vendor preset: enabled) Active: active (exited) since Tue 2018-09-25 05:06:10 UTC; 34s ago Process: 1046 ExecStart=/etc/init.d/kdump-tools start (code=exited, status=0/SUCCESS) Main PID: 1046 (code=exited, status=0/SUCCESS) сен 25 05:06:09 ptms-all-qa7 systemd[1]: Starting Kernel crash dump capture service... сен 25 05:06:09 ptms-all-qa7 kdump-tools[1046]: Starting kdump-tools: * Creating symlink /var/lib/kdump/vmlinuz сен 25 05:06:09 ptms-all-qa7 kdump-tools[1046]: * Creating symlink /var/lib/kdump/initrd.img сен 25 05:06:09 ptms-all-qa7 kdump-tools[1046]: Memory for crashkernel is not reserved сен 25 05:06:09 ptms-all-qa7 kdump-tools[1046]: Please reserve memory by passing"crashkernel=X@Y" parameter to kernel сен 25 05:06:09 ptms-all-qa7 kdump-tools[1046]: Then try to loading kdump kernel сен 25 05:06:09 ptms-all-qa7 kdump-tools[1046]: * failed to load kdump kernel сен 25 05:06:10 ptms-all-qa7 kdump-tools[1347]: failed to load kdump kernel сен 25 05:06:10 ptms-all-qa7 systemd[1]: Started Kernel crash dump capture service. Log says "Memory for crashkernel is not reserved", but if run: sudo cat /proc/iomem | grep Crash I get: 1800-37ff : Crash kernel What to do? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/kexec-tools/+bug/1794230/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1767797] Re: sir my bluetooth is not working .
[Expired for bluez (Ubuntu) because there has been no activity for 60 days.] ** Changed in: bluez (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1767797 Title: sir my bluetooth is not working . Status in bluez package in Ubuntu: Expired Bug description: sir my bluetooth is not working so can you solve this problem ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubuntu-release-upgrader-core 1:18.04.17 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 NonfreeKernelModules: talpa_vfshook talpa_pedconnector talpa_pedevice talpa_vcdevice talpa_core talpa_linux talpa_syscallhook wl ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CrashDB: ubuntu CurrentDesktop: ubuntu:GNOME Date: Sun Apr 29 18:16:13 2018 InstallationDate: Installed on 2018-04-28 (1 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) PackageArchitecture: all ProcEnviron: PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_IN SHELL=/bin/bash SourcePackage: ubuntu-release-upgrader Symptom: dist-upgrade UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1767797/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1780872] Re: wake on lan is not working
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1780872 Title: wake on lan is not working Status in linux package in Ubuntu: Expired Bug description: I'm dual-booting Ubuntu 18.04 and Windows 10. If I turn off my computer with Windows, I can turn it back on using wol. However, if I turn it off using Ubuntu the computer won't turn back on if I use wol. These are my network cards: ``` ignacio@ignacio-XPS-8930:~$ ifconfig docker0: flags=4163 mtu 1500 inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255 inet6 fe80::42:e4ff:fe0a:9fee prefixlen 64 scopeid 0x20 ether 02:42:e4:0a:9f:ee txqueuelen 0 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 165 bytes 24102 (24.1 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 enp4s0: flags=4163 mtu 1500 inet 192.168.86.31 netmask 255.255.255.0 broadcast 192.168.86.255 inet6 fe80::955b:12c8:20b9:7645 prefixlen 64 scopeid 0x20 ether d8:9e:f3:85:42:8a txqueuelen 1000 (Ethernet) RX packets 50484 bytes 52395285 (52.3 MB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 29166 bytes 4575560 (4.5 MB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 19 lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 1124 bytes 95423 (95.4 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 1124 bytes 95423 (95.4 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 veth66fe4e4: flags=4163 mtu 1500 inet6 fe80::2078:3ff:feb3:2aa1 prefixlen 64 scopeid 0x20 ether 22:78:03:b3:2a:a1 txqueuelen 0 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 224 bytes 30503 (30.5 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 vethb50cc6f: flags=4163 mtu 1500 inet6 fe80::5c0b:47ff:fef1:cfc9 prefixlen 64 scopeid 0x20 ether 5e:0b:47:f1:cf:c9 txqueuelen 0 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 125 bytes 18006 (18.0 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 wlp3s0: flags=4099 mtu 1500 ether 5c:ea:1d:4c:61:a7 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 ``` This is what ethtool tells me about my ethernet card: ``` ignacio@ignacio-XPS-8930:~$ sudo ethtool enp4s0 Settings for enp4s0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on MDI-X: Unknown Current message level: 0x60e4 (24804) link ifup rx_err tx_err hw wol Link detected: yes ``` And this is what happens when I try to activate wake on lan: ``` ignacio@ignacio-XPS-8930:~$ sudo ethtool -s enp4s0 wol g Cannot get current wake-on-lan settings: Operation not supported not setting wol ``` Finally, this is the infor about my distro: ``` ignacio@ignacio-XPS-8930:~$ lsb_release -rd Description: Ubuntu 18.04 LTS Release: 18.04 ``` Thanks for the help! ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ethtool 1:4.15-0ubuntu1 ProcVersionSignature: Ubuntu 4.15.0-23.25-generic 4.15.18 Uname: Linux 4.15.0-23-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Mon Jul 9 18:58:08 2018 Dependencies: gcc-8-base 8-20180414-1ubuntu2
[Kernel-packages] [Bug 1752961] Re: With kernel 4.13 btrfs scans for devices before all devices have been discovered
d60dafd does NOT have the bug. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1752961 Title: With kernel 4.13 btrfs scans for devices before all devices have been discovered Status in linux package in Ubuntu: In Progress Status in linux source package in Artful: Won't Fix Status in linux source package in Bionic: In Progress Status in linux source package in Cosmic: In Progress Bug description: See attached dmesg outputs for booting kernels 4.11.x (working) and 4.13.x (not working). dmesg-4.11.0-14-good.txt shows the dmesg output when booting kernel 4.11.x. btrfs scans for devices after all 4 (sda, sdb, sdc, sdd) of the devices have been discovered by the kernel. The btrfs RAID1 filesystem mounts, and everything is good. dmesg-4.13.0-36-fail.txt shows the dmesg output when booting kernel 4.13.x. btrfs scans for devices after only 2 (sda, sdb) of the devices have been discovered by the kernel. The btrfs RAID1 filesystem fails to mount ("failed to read the system array: -5"). The remaining 2 devices (sdc, sdd) are discovered by the kernel immediately afterward. At the end of the log, I run `btrfs device scan` and mount the filesystem manually. Hardware: HP ProLiant MicroServer Gen8 4x WDC WD20EFRX --- AlsaDevices: Error: command ['ls', '-l', '/dev/snd/'] failed with exit code 2: ls: cannot access '/dev/snd/': No such file or directory AplayDevices: aplay: device_list:270: no soundcards found... ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 ArecordDevices: arecord: device_list:270: no soundcards found... DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2015-10-15 (933 days ago) InstallationMedia: Xubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422.1) MachineType: HP ProLiant MicroServer Gen8 Package: linux (not installed) ProcEnviron: TERM=linux PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-4.15.0-20-generic root=UUID=d976ab07-8377-46dd-ac6c-f5f7312a8305 ro rootflags=subvol=@ rootdelay=10 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. Tags: bionic apport-hook-error Uname: Linux 4.15.0-20-generic x86_64 UnreportableReason: This report is about a package that is not installed. UpgradeStatus: Upgraded to bionic on 2018-05-05 (0 days ago) UserGroups: _MarkForUpload: True dmi.bios.date: 07/16/2015 dmi.bios.vendor: HP dmi.bios.version: J06 dmi.chassis.type: 7 dmi.chassis.vendor: HP dmi.modalias: dmi:bvnHP:bvrJ06:bd07/16/2015:svnHP:pnProLiantMicroServerGen8:pvr:cvnHP:ct7:cvr: dmi.product.family: ProLiant dmi.product.name: ProLiant MicroServer Gen8 dmi.sys.vendor: HP To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752961/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793841] Re: IP_SET modules not included in kernel build, prevents container functionality
ubuntu@deva-controller0:~$ uname -a Linux deva-controller0 4.15.0-1022-kvm #22+ipset.0 SMP Mon Sep 24 15:12:21 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux ubuntu@deva-controller0:~$ cd /boot ubuntu@deva-controller0:/boot$ grep SET config-4.15.0-1022-kvm CONFIG_ARCH_HAS_SET_MEMORY=y CONFIG_CPUSETS=y CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_IP_SET=y CONFIG_IP_SET_BITMAP_IP=m CONFIG_IP_SET_BITMAP_IPMAC=m CONFIG_IP_SET_BITMAP_PORT=m CONFIG_IP_SET_HASH_IP=m CONFIG_IP_SET_HASH_IPMAC=m CONFIG_IP_SET_HASH_IPMARK=m CONFIG_IP_SET_HASH_IPPORT=m CONFIG_IP_SET_HASH_IPPORTIP=m CONFIG_IP_SET_HASH_IPPORTNET=m CONFIG_IP_SET_HASH_MAC=m CONFIG_IP_SET_HASH_NET=m CONFIG_IP_SET_HASH_NETIFACE=m CONFIG_IP_SET_HASH_NETNET=m CONFIG_IP_SET_HASH_NETPORT=m CONFIG_IP_SET_HASH_NETPORTNET=m CONFIG_IP_SET_LIST_SET=m CONFIG_IP_SET_MAX=256 # CONFIG_NETFILTER_XT_SET is not set # CONFIG_POWER_RESET is not set CONFIG_PROC_PID_CPUSET=y # CONFIG_RESET_CONTROLLER is not set root@deva-controller0:~# lsmod | grep ip_set ip_set_hash_net28672 0 ip_set_hash_ip 24576 0 This looks good to me Kamal, Thanks! -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-kvm in Ubuntu. https://bugs.launchpad.net/bugs/1793841 Title: IP_SET modules not included in kernel build, prevents container functionality Status in cloud-images: Invalid Status in linux-kvm package in Ubuntu: In Progress Status in linux-kvm source package in Bionic: In Progress Bug description: I would like to run Ubuntu Minimal Cloud Image as the base OS on which I run Kubernetes and various other containers, but it requires ipset and various kernel modules included in the build. Is there a way to have those added by default, or a documented process for me to modify the kernel on my Minimal Cloud images? I tried to use kube-router as a routing platform for connecting the containers between Ubuntu hosts, but this requires ipset. The error from kube-router: I0921 00:19:45.773157 1 kube-router.go:207] Running /usr/local/bin/kube-router version v0.2.0, built on 2018-09-12T08:03:59-0400, go1.10.3 Failed to run kube-router: Failed to create network routing controller: Failed to create ipset set on system: ipset v6.34: Kernel error received: set type not supported After some digging, it seems I need the following modules at least compiled into the kernel as modules: root@deva-controller0:~# cat "/boot/config-`uname -r`" | grep IP_SET CONFIG_IP_SET=y CONFIG_IP_SET_MAX=256 # CONFIG_IP_SET_BITMAP_IP is not set # CONFIG_IP_SET_BITMAP_IPMAC is not set # CONFIG_IP_SET_BITMAP_PORT is not set # CONFIG_IP_SET_HASH_IP is not set # CONFIG_IP_SET_HASH_IPMARK is not set # CONFIG_IP_SET_HASH_IPPORT is not set # CONFIG_IP_SET_HASH_IPPORTIP is not set # CONFIG_IP_SET_HASH_IPPORTNET is not set # CONFIG_IP_SET_HASH_IPMAC is not set # CONFIG_IP_SET_HASH_MAC is not set # CONFIG_IP_SET_HASH_NETPORTNET is not set # CONFIG_IP_SET_HASH_NET is not set # CONFIG_IP_SET_HASH_NETNET is not set # CONFIG_IP_SET_HASH_NETPORT is not set # CONFIG_IP_SET_HASH_NETIFACE is not set # CONFIG_IP_SET_LIST_SET is not set Ubuntu Release: ~# cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=18.04 DISTRIB_CODENAME=bionic DISTRIB_DESCRIPTION="Ubuntu 18.04.1 LTS" Any help is greatly appreciated. To manage notifications about this bug go to: https://bugs.launchpad.net/cloud-images/+bug/1793841/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
Re: [Kernel-packages] [Bug 1781016] Re: Slow flood of do_IRQ: No irq for vector
Mine is a desktop, and no suspend occurs, ever. Are you (Kai-Heng Feng) asking me to suspend it and wake it up and see if it goes away? On Mon, Sep 24, 2018 at 10:45 AM Kai-Heng Feng wrote: > Do you see this after S3? > > -- > You received this bug notification because you are subscribed to the bug > report. > https://bugs.launchpad.net/bugs/1781016 > > Title: > Slow flood of do_IRQ: No irq for vector > > Status in linux package in Ubuntu: > Incomplete > > Bug description: > Every few seconds I get something like this in my dmesg: > > [44984.933221] do_IRQ: 1.34 No irq handler for vector > [44986.933976] do_IRQ: 1.34 No irq handler for vector > [44991.935614] do_IRQ: 1.34 No irq handler for vector > [45004.938590] do_IRQ: 1.34 No irq handler for vector > [45005.939002] do_IRQ: 4.34 No irq handler for vector > [45034.949161] do_IRQ: 4.34 No irq handler for vector > [45051.954569] do_IRQ: 4.34 No irq handler for vector > [45058.956019] do_IRQ: 4.34 No irq handler for vector > [45062.957727] do_IRQ: 4.34 No irq handler for vector > [45063.958204] do_IRQ: 4.34 No irq handler for vector > [45073.961103] do_IRQ: 4.34 No irq handler for vector > > The numbers vary. Some examples are 4.34, 4.36, 1.34, 0.33, 6.34, > 7.33, 5.37. Eventually dmesg's ring buffer is full and my entire log > is just messages like above with varying #.## numbers. > > I researched it and tried disabling irqbalance. It had no effect, the > messages continued. > > The system is a Ryzen 2700X with B350 chipset on Asus Prime B350-PLUS. > I have 64GB of Kingston DDR4-2400 ECC memory and Samsung 960 PRO M.2 > NVMe SSD, and an Intel I350-T4 quad port gigabit NIC. This issue never > occurred before installing 18.03 on the same hardware. No overclocking > whatsoever has ever been done to this machine. > > Also, I had to disable selective suspend on USB in this version to > prevent major USB issues, which was not required in 17.10, that might > be related. > > My system seems stable, but spurious IRQs can't be good. I'd like to > resolve this if possible. > > ProblemType: Bug > DistroRelease: Ubuntu 18.04 > Package: linux-image-4.15.0-26-generic 4.15.0-26.28 > ProcVersionSignature: Ubuntu 4.15.0-26.28-generic 4.15.18 > Uname: Linux 4.15.0-26-generic x86_64 > NonfreeKernelModules: nvidia_modeset nvidia > ApportVersion: 2.20.9-0ubuntu7.2 > Architecture: amd64 > AudioDevicesInUse: >USERPID ACCESS COMMAND >/dev/snd/controlC0: gdm2145 F pulseaudio > doug 3736 F pulseaudio >/dev/snd/controlC1: gdm2145 F pulseaudio > doug 3736 F pulseaudio > Date: Tue Jul 10 12:49:00 2018 > HibernationDevice: > > InstallationDate: Installed on 2017-06-26 (379 days ago) > InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 > (20160420.1) > MachineType: System manufacturer System Product Name > ProcEnviron: >LANGUAGE=en_CA:en >TERM=xterm-256color >PATH=(custom, no user) >LANG=en_CA.UTF-8 >SHELL=/bin/bash > ProcFB: > > ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-26-generic > root=UUID=53446747-0814-48f7-b7c4-7fd7d7234d83 ro video=vesa:off vga=normal > video=efifb:off usbcore.autosuspend=-1 usbhid.quirks=0x1e71:0x170e:0x4 > PulseList: >Error: command ['pacmd', 'list'] failed with exit code 1: Home > directory not accessible: Permission denied >No PulseAudio daemon running, or not running as session daemon. > RelatedPackageVersions: >linux-restricted-modules-4.15.0-26-generic N/A >linux-backports-modules-4.15.0-26-generic N/A >linux-firmware 1.173.1 > RfKill: > > SourcePackage: linux > UpgradeStatus: No upgrade log present (probably fresh install) > dmi.bios.date: 04/19/2018 > dmi.bios.vendor: American Megatrends Inc. > dmi.bios.version: 4011 > dmi.board.asset.tag: Default string > dmi.board.name: PRIME B350-PLUS > dmi.board.vendor: ASUSTeK COMPUTER INC. > dmi.board.version: Rev X.0x > dmi.chassis.asset.tag: Default string > dmi.chassis.type: 3 > dmi.chassis.vendor: Default string > dmi.chassis.version: Default string > dmi.modalias: > dmi:bvnAmericanMegatrendsInc.:bvr4011:bd04/19/2018:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnPRIMEB350-PLUS:rvrRevX.0x:cvnDefaultstring:ct3:cvrDefaultstring: > dmi.product.family: To be filled by O.E.M. > dmi.product.name: System Product Name > dmi.product.version: System Version > dmi.sys.vendor: System manufacturer > > To manage notifications about this bug go to: > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1781016/+subscriptions > -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1781016 Title: Slow flood of do_IRQ: No irq for vector Status in lin
[Kernel-packages] [Bug 1793394] Re: hns3: enable ethtool rx-vlan-filter on supported hw
** Description changed: [Impact] Newer revisions of hns3 support toggling the rx-vlan-filter feature, but the driver does not allow it. [Test Case] Currently the command: - $ sudo strace ethtool -K rx-vlan-filter off + $ sudo ethtool -K rx-vlan-filter off reports: - Could not change any device features + Could not change any device features Even on hardware that supports this feature. [Fix] Apply this upstream commit: 3e85af6a6812d net: hns3: Add vlan filter setting by ethtool command -K [Regression Risk] I've regression tested on hns3 hardware that does not support this feature, and it worked as it should. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1793394 Title: hns3: enable ethtool rx-vlan-filter on supported hw Status in linux package in Ubuntu: In Progress Status in linux source package in Bionic: In Progress Bug description: [Impact] Newer revisions of hns3 support toggling the rx-vlan-filter feature, but the driver does not allow it. [Test Case] Currently the command: $ sudo ethtool -K rx-vlan-filter off reports: Could not change any device features Even on hardware that supports this feature. [Fix] Apply this upstream commit: 3e85af6a6812d net: hns3: Add vlan filter setting by ethtool command -K [Regression Risk] I've regression tested on hns3 hardware that does not support this feature, and it worked as it should. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1793394/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1752772] Re: r8169 ethernet card don't work after returning from suspension
Linux Fixo 4.18.0-7-generic #8-Ubuntu SMP Tue Aug 28 18:24:42 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux no always after suspend, restart with sudo modprobe -r r8169 sudo modprobe -i r8169 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1752772 Title: r8169 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Fix Released Status in linux source package in Bionic: Fix Released Bug description: ===SRU Justification=== [Impact] Ethernet r8169 stops working after system resumed from suspend. [Test] User confirmed these patches fix the issue. r8169 continues to work after resume from suspend. [Regression Potential] Medium. The fix is limited to one device, all patches are in mainline. The WOL default change might cause regression for users that depend on BIOS settings. We can advice them to use userspace tool (systemd, ethtool, etc.) instead. ===Original Bug Report=== I have noticed that the network stopped working on my desktop after I've suspended the system and woke it up. On dmesg there are messages like: [ 150.877998] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 150.944101] do_IRQ: 3.37 No irq handler for vector [ 150.944105] r8169 :01:00.0 enp1s0: link down [ 150.944180] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready When using Xenial (from a different install), this problem is not happening. This is happening on Bionic. There are only two ways to restore connectivity: 1) Reboot the system; 2) Remove the r8169 module and reinsert it with modprobe. The motherboard is a AsRock H55M-LE and the Ethernet controller is: 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03) ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: linux-firmware 1.172 ProcVersionSignature: Ubuntu 4.15.0-10.11-generic 4.15.3 Uname: Linux 4.15.0-10-generic x86_64 ApportVersion: 2.20.8-0ubuntu10 Architecture: amd64 CurrentDesktop: LXDE Date: Fri Mar 2 00:21:57 2018 Dependencies: InstallationDate: Installed on 2018-02-26 (3 days ago) InstallationMedia: Lubuntu 18.04 LTS "Bionic Beaver" - Alpha amd64 (20180226) PackageArchitecture: all SourcePackage: linux-firmware UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-10-generic. ApportVersion: 2.20.8-0ubuntu10 Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: MID [HDA Intel MID], device 0: VT1818S Analog [VT1818S Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: usuario1153 F pulseaudio /dev/snd/controlC1: usuario1153 F pulseaudio Card0.Amixer.info: Card hw:0 'MID'/'HDA Intel MID at 0xfbdf8000 irq 26' Mixer name : 'VIA VT1818S' Components : 'HDA:11060440,18492818,0010' Controls : 40 Simple ctrls : 17 Card1.Amixer.info: Card hw:1 'HDMI'/'HDA ATI HDMI at 0xfbffc000 irq 27' Mixer name : 'ATI R6xx HDMI' Components : 'HDA:1002aa01,00aa0100,00100200' Controls : 7 Simple ctrls : 1 Card1.Amixer.values: Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] CurrentDesktop: LXDE Dependencies: DistroRelease: Ubuntu 18.04 HibernationDevice: RESUME=UUID=edd83175-c707-4b31-90d2-ce2f5cebc73f InstallationDate: Installed on 2018-02-26 (3 days ago) InstallationMedia: Lubuntu 18.04 LTS "Bionic Beaver" - Alpha amd64 (20180226) MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. Package: linux-firmware 1.172 PackageArchitecture: all ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz root=UUID=0c4fc517-b7a0-49b0-bfcb-0485dfe6413b ro quiet ProcVersionSignature: Ubuntu 4.15.0-10.11-generic 4.15.3 RelatedPackageVersions: linux-restricted-modules-4.15.0-10-generic N/A linux-backports-modules-4.15.0-10-generic N/A linux-firmware 1.172 RfKill: Tags: bionic Uname: Linux 4.15.0-10-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip libvirt lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 10/20/2010 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P1.80 dmi.board.name: H55M-LE dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP1.80:bd10/20/2010:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnH55M-LE
[Kernel-packages] [Bug 1778011] Re: SRU: PRIME Power Saving mode draws too much power
Hello, I saw the request for testing from the article here: http://albertomilone.com/blog/?p=670 I 'm running Ubuntu Mate 18.04 in a laptop with i5-7300hq and 1050ti. I didn't know of the problems mentioned but I 'd taken to switching gpus from the command line with prime-select and rebooting because of minor problems with the nvidia application. I can run some tests and upload logs if needed. The drivers I use are: $ apt policy nvidia-390 nvidia-390: Installed: 390.87-0ubuntu0~gpu18.04.1 Candidate: 390.87-0ubuntu0~gpu18.04.1 Version table: *** 390.87-0ubuntu0~gpu18.04.1 500 500 http://ppa.launchpad.net/graphics-drivers/ppa/ubuntu bionic/main amd64 Packages 100 /var/lib/dpkg/status -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to nvidia-settings in Ubuntu. https://bugs.launchpad.net/bugs/1778011 Title: SRU: PRIME Power Saving mode draws too much power Status in HWE Next: New Status in gdm3 package in Ubuntu: Fix Released Status in nvidia-graphics-drivers-390 package in Ubuntu: Fix Released Status in nvidia-prime package in Ubuntu: Fix Released Status in nvidia-settings package in Ubuntu: Fix Released Status in ubuntu-drivers-common package in Ubuntu: Fix Released Status in gdm3 source package in Bionic: Fix Committed Status in nvidia-graphics-drivers-390 source package in Bionic: Fix Committed Status in nvidia-prime source package in Bionic: Fix Committed Status in nvidia-settings source package in Bionic: Fix Committed Status in ubuntu-drivers-common source package in Bionic: Fix Committed Bug description: SRU Request: [Impact] Relying on the nouveau driver and on the vga switcheroo (to get around a change in systemd LP: #1777099) caused increased power consumption, and slowed down the switching process. Furthermore, if the main X/Xwayland session was started by Gdm when the nvidia driver was loaded, the session will keep the nvidia module loaded, and prevent the system from switching off the dGPU. Also, the nouveau driver will be loaded, if nvidia is not, and this can cause problems to unsupported NVIDIA GPUs. The solution involves the following changes: 1) Solving the problem in systemd (LP: #1777099) 2) Adding code in gpu-manager and in nvidia-prime to unload the nvidia modules, and to allow the PCI device to sleep. 3) Making a slight change to the current patch in Gdm, used to call the PRIME scripts before and after a Gdm session (so that gpu-manager gets actually called on log out) 4) Adding code in gpu-manager to kill the main X/Xwayland session on log out, if the session is preventing us from unloading the nvidia driver. A new X/Xwayland session will be created after unload the module. 5) Removing the systemd service that loads nouveau from the nvidia packages. [Test Case] 1) Enable the -proposed repository, and install the new "ubuntu-drivers-common", nvidia drivers, nvidia-prime, and gdm3 * 2) Make sure the nvidia packages are installed, and enable performance mode (if it is already enabled, call "sudo prime-select intel" first): sudo prime-select nvidia 3) Restart your computer and attach your /var/log/gpu-manager.log. see if the system boots correctly. If unsure, please attach your /var/log /gpu-manager.log and /var/log/Xorg.0.log 4) Select power saving mode: sudo prime-select intel 5) Log out and log back in 6) Check if the nvidia driver is still loaded: lsmod | grep nvidia [Regression Potential] Low, as hybrid graphics support does not work correctly, and the changes only affect this use case. _ * Steps to test the updates: 1) Enable the bionic-proposed repositories 2) Create /etc/apt/preferences.d/proposed-updates with the following content: Package: * Pin: release a=bionic-proposed Pin-Priority: 400 3) Update the list of packages: sudo apt-get update 4) Install the packages from -proposed using the following command: sudo apt install nvidia-driver-390/bionic-proposed gdm3/bionic- proposed ubuntu-drivers-common/bionic-proposed nvidia-prime/bionic- proposed nvidia-settings/bionic-proposed libnvidia-gl-390/bionic- proposed libnvidia-compute-390/bionic-proposed libnvidia-decode-390 /bionic-proposed libnvidia-encode-390/bionic-proposed libnvidia- ifr1-390/bionic-proposed libnvidia-fbc1-390/bionic-proposed To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1778011/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1757445] Re: Suspend does not always resume
Hi there, I'm running the kernel 4.15.0-34-generic #37 on an ASUS N752VX with the same problem too : Blanked screen and pulsating power led. When I try to wake up the system, the power LED would switch on, fans starts however the screen stays black. I've plugged an external screen, without result. I have to hard reboot each time. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1757445 Title: Suspend does not always resume Status in linux package in Ubuntu: Confirmed Status in linux-meta-hwe package in Ubuntu: Confirmed Status in linux source package in Bionic: Confirmed Bug description: Dell XPS 13 9350 on AC power left running overnight, suspends after a given timeout. When coming back the next morning sometimes the laptop resumes to an aubergine desktop (just the screen, no GDM) and cursor and sits there forever. Sometimes it resumes to a black screen and cursor. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: linux-image-4.15.0-12-generic 4.15.0-12.13 ProcVersionSignature: Ubuntu 4.15.0-12.13-generic 4.15.7 Uname: Linux 4.15.0-12-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.8-0ubuntu10 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Wed Mar 21 14:15:04 2018 InstallationDate: Installed on 2018-02-13 (36 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Alpha amd64 (20180201) MachineType: Dell Inc. XPS 13 9350 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-12-generic root=UUID=bc5b647b-38ca-4206-9e96-774a5ac6b833 ro quiet splash vt.handoff=1 RelatedPackageVersions: linux-restricted-modules-4.15.0-12-generic N/A linux-backports-modules-4.15.0-12-generic N/A linux-firmware 1.173 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/18/2017 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.5.1 dmi.board.name: 07TYC2 dmi.board.vendor: Dell Inc. dmi.board.version: A01 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.5.1:bd08/18/2017:svnDellInc.:pnXPS139350:pvr:rvnDellInc.:rn07TYC2:rvrA01:cvnDellInc.:ct9:cvr: dmi.product.family: NULL dmi.product.name: XPS 13 9350 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1757445/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1639920] Comment bridged from LTC Bugzilla
*** This bug is a duplicate of bug 1647887 *** https://bugs.launchpad.net/bugs/1647887 --- Comment From dougm...@us.ibm.com 2018-09-24 16:08 EDT--- Closing this as there seems to be nothing to do. If the problem still exists, we should see new bugs open for it. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1639920 Title: NVMe detection failed during bootup Status in linux package in Ubuntu: Triaged Bug description: I've been running an on-off test on a couple of Power8 systems and have been getting a failure of detection on the NVMe drives on Ubuntu 16.04.1 only. I've ran the same test on RHEL 7.2 and have not encountered this proble. Once the problem occurs the OS will stop to boot up and a message appears: Welcome to emergency mode! After logging in, type "journalctl -xb" to view system logs, "systemctl reboot" to reboot, "systemctl default" or ^D to try again to boot into default mode. Give root password for maintenance (or press Control-D to continue): ProblemType: Crash DistroRelease: Ubuntu 16.04 Package: apport 2.20.1-0ubuntu2.1 ProcVersionSignature: Ubuntu 4.4.0-45.66-generic 4.4.21 Uname: Linux 4.4.0-45-generic ppc64le ApportVersion: 2.20.1-0ubuntu2.1 Architecture: ppc64el CrashReports: 640:0:116:12295:2016-11-07 11:11:27.995107650 -0800:2016-11-07 11:31:31.733627559 -0800:/var/crash/_usr_bin_apport-bug.0.crash 644:0:116:0:2016-11-07 11:11:28.931104586 -0800:2016-11-07 11:11:28.931104586 -0800:/var/crash/_usr_bin_apport-cli.0.None.hanging Date: Mon Nov 7 11:11:28 2016 ExecutablePath: /usr/bin/apport-bug InstallationDate: Installed on 2016-11-05 (2 days ago) InstallationMedia: Ubuntu-Server 16.04.1 LTS "Xenial Xerus" - Release ppc64el (20160719) InterpreterPath: /usr/bin/python3.5 PackageArchitecture: all ProcCmdline: /usr/bin/python3 /usr/bin/apport-cli --hanging ProcEnviron: TERM=linux PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcLoadAvg: 0.30 0.41 0.19 1/1132 2428 ProcLocks: ProcSwaps: Filename TypeSizeUsedPriority /dev/sda3 partition157914048 0 -1 ProcVersion: Linux version 4.4.0-45-generic (buildd@bos01-ppc64el-030) (gcc version 5.4.0 20160609 (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.2) ) #66-Ubuntu SMP Wed Oct 19 14:13:11 UTC 2016 PythonArgs: ['/usr/bin/ubuntu-bug', '--hanging'] SourcePackage: apport Title: apport-bug crashed with TypeError in run_hang(): int() argument must be a string, a bytes-like object or a number, not 'NoneType' UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: cpu_cores: Number of cores present = 20 cpu_coreson: Number of cores online = 20 cpu_smt: SMT=8 mtime.conffile..etc.apport.crashdb.conf: 2016-11-07T10:38:18.528739 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1639920/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 159356] Re: When DMA is disabled system freeze on high memory usage
@constantoverride Thanks for the patch. AS I'm running Live, I can't upgrade the kernel. It looks like that patch was merged into the mainline kernel at some point since it's reported here: https://bugzilla.redhat.com/show_bug.cgi?id=1577528 , that the bug no longer exists. I'll have to wait for Debian to rebase a release on 4.17.5 or greater it seems. ** Bug watch added: Red Hat Bugzilla #1577528 https://bugzilla.redhat.com/show_bug.cgi?id=1577528 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/159356 Title: When DMA is disabled system freeze on high memory usage Status in linux package in Ubuntu: Incomplete Bug description: I run a batch matlab job server here at my lab, running Dapper 6.06 (for the LTS). One of the users has submitted a very memory-consuming job, which successfully crashes the server. Upon closer inspection, the crash happens like this: 1. I run matlab with the given file (as an ordinary, unpriveleged user) 2. RAM usage quickly fills up 3. Once the RAM meter hits 100%, the system freezes: All SSH connections freeze up, and while switching VTs directly on the machine works, no new processes run - so one can't log in, or do anything if he is logged in. (Sometimes typing doesn't work at all) Note that the swap - while 7 gigs of it are available - is never used. (The machine has 7 gigs of RAM as well) I've tried the same on my Gutsy 32-bit box, and there was no system freezeup - matlab simply notified that the system was out of memory. However, it did this once memory was 100% in use - and still, swap didn't get used at all! (Though it is mounted correctly and shows up in "top" and "free"). So first thing's first - I'd like to eliminate the crash issue. I suppose I could switch the server to 32-bit, but I think that would be a performance loss, considering that it does a lot of heavy computation. There is no reason, however, that this should happen on a 64-bit machine anyway. Why does it? WORKAROUND: Enabling DMA in the BIOS To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/159356/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1291969] Re: No usb on resume from suspend
Bug seems fixed for Bionic 18.04 in upstream 4.19.0-041900rc4-generic kernel ** Tags added: kernel-fixed-upstream -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1291969 Title: No usb on resume from suspend Status in linux package in Ubuntu: Confirmed Bug description: My XPS13 running 14.04 sometimes loses its USB ports after resume from suspend. When this happens the entire bus seems dead - both external ports do not work, and internal USB devices (webcam, touchscreen) are also non-functional. Furthermore lsusb shows no devices attached. Rebooting or performing another suspend/resume cycle will clear the problem. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-17-generic 3.13.0-17.37 ProcVersionSignature: Ubuntu 3.13.0-17.37-generic 3.13.6 Uname: Linux 3.13.0-17-generic x86_64 ApportVersion: 2.13.3-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: steve 2868 F pulseaudio /dev/snd/controlC0: steve 2868 F pulseaudio CurrentDesktop: Unity Date: Thu Mar 13 08:36:46 2014 DistributionChannelDescriptor: # This is a distribution channel descriptor # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-precise-amd64-20130203-1 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=79084358-087f-4cee-a0be-e2f78361873f InstallationDate: Installed on 2013-12-02 (100 days ago) InstallationMedia: Ubuntu 12.04 "Precise" - Build amd64 LIVE Binary 20130203-13:50 Lsusb: Bus 001 Device 002: ID 8087:8000 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. XPS13 9333 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-17-generic root=UUID=0b9db31c-747b-40ad-bbbd-13a9a29caece ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-17-generic N/A linux-backports-modules-3.13.0-17-generic N/A linux-firmware 1.126 RfKill: 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2014-02-12 (28 days ago) dmi.bios.date: 11/11/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A01 dmi.board.name: 0GFTRT dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA01:bd11/11/2013:svnDellInc.:pnXPS139333:pvr:rvnDellInc.:rn0GFTRT:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: XPS13 9333 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1291969/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1794175] [NEW] kyber-iosched module missing from linux-modules package
Public bug reported: Module block/kyber-iosched.ko does get built but does not appear in the linux-modules-{version}-aws package. ** Affects: linux-aws (Ubuntu) Importance: Undecided Assignee: Kamal Mostafa (kamalmostafa) Status: In Progress ** Affects: linux-aws (Ubuntu Bionic) Importance: Undecided Assignee: Kamal Mostafa (kamalmostafa) Status: In Progress ** Also affects: linux-aws (Ubuntu Bionic) Importance: Undecided Status: New ** Changed in: linux-aws (Ubuntu Bionic) Assignee: (unassigned) => Kamal Mostafa (kamalmostafa) ** Changed in: linux-aws (Ubuntu Bionic) Status: New => In Progress -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-aws in Ubuntu. https://bugs.launchpad.net/bugs/1794175 Title: kyber-iosched module missing from linux-modules package Status in linux-aws package in Ubuntu: In Progress Status in linux-aws source package in Bionic: In Progress Bug description: Module block/kyber-iosched.ko does get built but does not appear in the linux-modules-{version}-aws package. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-aws/+bug/1794175/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1794172] [NEW] HiSilicon SAS controller doesn't recover from PHY STP link timeout
Public bug reported: [Impact] Under certain conditions, the SAS controller may not recover from an STP link timeout, which can make disks behind the controller inaccessible. [Test Case] I don't have a way of injecting this error, so regression tested only. [Fix] commit 25908cac84b2ea18d4609fc237d6135d0037041d Author: Xiaofei Tan Date: Wed Jul 18 22:14:27 2018 +0800 scsi: hisi_sas: Fix the failure of recovering PHY from STP link timeout [Regression Risk] This driver in Ubuntu is only used by the SoC in the D06 board, which will be directly regression tested. ** Affects: linux (Ubuntu) Importance: Undecided Assignee: dann frazier (dannf) Status: In Progress ** Affects: linux (Ubuntu Bionic) Importance: Undecided Assignee: dann frazier (dannf) Status: In Progress ** Also affects: linux (Ubuntu Bionic) Importance: Undecided Status: New ** Changed in: linux (Ubuntu) Status: New => In Progress ** Changed in: linux (Ubuntu Bionic) Status: New => In Progress ** Changed in: linux (Ubuntu) Assignee: (unassigned) => dann frazier (dannf) ** Changed in: linux (Ubuntu Bionic) Assignee: (unassigned) => dann frazier (dannf) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1794172 Title: HiSilicon SAS controller doesn't recover from PHY STP link timeout Status in linux package in Ubuntu: In Progress Status in linux source package in Bionic: In Progress Bug description: [Impact] Under certain conditions, the SAS controller may not recover from an STP link timeout, which can make disks behind the controller inaccessible. [Test Case] I don't have a way of injecting this error, so regression tested only. [Fix] commit 25908cac84b2ea18d4609fc237d6135d0037041d Author: Xiaofei Tan Date: Wed Jul 18 22:14:27 2018 +0800 scsi: hisi_sas: Fix the failure of recovering PHY from STP link timeout [Regression Risk] This driver in Ubuntu is only used by the SoC in the D06 board, which will be directly regression tested. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1794172/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1794166] [NEW] Add functional level reset support for the SAS controller on HiSilicon D06 systems
Public bug reported: [Impact] Administrators are not able to request an FLR reset via sysfs on v3 hisi_sas controllers. [Test Case] dmesg -c > /dev/null echo 1 > /sys/devices/pci:74/:74:02.0/reset dmesg Expected output: [259487.660676] hisi_sas_v3_hw :74:02.0: FLR prepare [259489.602044] hisi_sas_v3_hw :74:02.0: FLR done [Fix] commit e5ea48014adcb030b9d92743e87fbbcbbb2a1d70 Author: Xiaofei Tan Date: Wed Jul 18 22:14:30 2018 +0800 scsi: hisi_sas: Implement handlers of PCIe FLR for v3 hw [Regression Risk] The fix itself has a low regression risk because it implements a previously-unsupported feature. However, there are 2 changesets that refactor reset code ahead that are required before the above fix, and that refactoring has a risk of introducing a regression. ** Affects: linux (Ubuntu) Importance: Undecided Assignee: dann frazier (dannf) Status: In Progress ** Affects: linux (Ubuntu Bionic) Importance: Undecided Assignee: dann frazier (dannf) Status: In Progress ** Also affects: linux (Ubuntu Bionic) Importance: Undecided Status: New ** Changed in: linux (Ubuntu Bionic) Status: New => In Progress ** Changed in: linux (Ubuntu Bionic) Assignee: (unassigned) => dann frazier (dannf) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1794166 Title: Add functional level reset support for the SAS controller on HiSilicon D06 systems Status in linux package in Ubuntu: In Progress Status in linux source package in Bionic: In Progress Bug description: [Impact] Administrators are not able to request an FLR reset via sysfs on v3 hisi_sas controllers. [Test Case] dmesg -c > /dev/null echo 1 > /sys/devices/pci:74/:74:02.0/reset dmesg Expected output: [259487.660676] hisi_sas_v3_hw :74:02.0: FLR prepare [259489.602044] hisi_sas_v3_hw :74:02.0: FLR done [Fix] commit e5ea48014adcb030b9d92743e87fbbcbbb2a1d70 Author: Xiaofei Tan Date: Wed Jul 18 22:14:30 2018 +0800 scsi: hisi_sas: Implement handlers of PCIe FLR for v3 hw [Regression Risk] The fix itself has a low regression risk because it implements a previously-unsupported feature. However, there are 2 changesets that refactor reset code ahead that are required before the above fix, and that refactoring has a risk of introducing a regression. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1794166/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1794165] [NEW] hisi_sas: Reduce unnecessary spin lock contention
Public bug reported: [Impact] The current design of hisi_sas_task_prep() has two critical sections protected by different spin locks. This can lead to unnecessary thrashing. By merging the critical sections under one spin lock, we can avoid this. [Test Case] Use fio to measure performance difference, and verify that there is no performance decrease. Sample config attached. Test on D05 and D06 systems, since both are impacted. [Fix] commit 6cca51ee0aa2540d648ff8698c3889330d897f27 Author: Xiang Chen Date: Wed Jul 18 22:14:31 2018 +0800 scsi: hisi_sas: Tidy hisi_sas_task_prep() [Regression Risk] It's possible that decreasing the lock granularity like this will lead to unforeseen latency issues. However, the additional work done under the new spin lock is just a single list_add_tail() call, which appears to run in constant time. ** Affects: linux (Ubuntu) Importance: Undecided Assignee: dann frazier (dannf) Status: In Progress ** Affects: linux (Ubuntu Bionic) Importance: Undecided Assignee: dann frazier (dannf) Status: In Progress ** Attachment added: "fio" https://bugs.launchpad.net/bugs/1794165/+attachment/5192579/+files/fio ** Also affects: linux (Ubuntu Bionic) Importance: Undecided Status: New ** Changed in: linux (Ubuntu Bionic) Status: New => In Progress ** Changed in: linux (Ubuntu Bionic) Assignee: (unassigned) => dann frazier (dannf) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1794165 Title: hisi_sas: Reduce unnecessary spin lock contention Status in linux package in Ubuntu: In Progress Status in linux source package in Bionic: In Progress Bug description: [Impact] The current design of hisi_sas_task_prep() has two critical sections protected by different spin locks. This can lead to unnecessary thrashing. By merging the critical sections under one spin lock, we can avoid this. [Test Case] Use fio to measure performance difference, and verify that there is no performance decrease. Sample config attached. Test on D05 and D06 systems, since both are impacted. [Fix] commit 6cca51ee0aa2540d648ff8698c3889330d897f27 Author: Xiang Chen Date: Wed Jul 18 22:14:31 2018 +0800 scsi: hisi_sas: Tidy hisi_sas_task_prep() [Regression Risk] It's possible that decreasing the lock granularity like this will lead to unforeseen latency issues. However, the additional work done under the new spin lock is just a single list_add_tail() call, which appears to run in constant time. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1794165/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1794156] [NEW] Fix potential corruption using SAS controller on HiSilicon arm64 boards
Public bug reported: [Impact] On HiSilicon ARM server systems, there is a potential for corruption when multiple CPUs are accessing the same controller. [Test Case] I don't have a reproducer for the failure, so will be regression tested only on D05 and D06 platforms. [Fix] commit 1c09b663168bb5fd8562234976b76115f2aebe91 Author: Xiaofei Tan Date: Wed Jul 18 22:14:32 2018 +0800 scsi: hisi_sas: add memory barrier in task delivery function [Regression Risk] The biggest regression risk I see would be a performance impact. But correct data is better than fast data :) ** Affects: linux (Ubuntu) Importance: Undecided Assignee: dann frazier (dannf) Status: In Progress ** Affects: linux (Ubuntu Bionic) Importance: Undecided Assignee: dann frazier (dannf) Status: In Progress ** Also affects: linux (Ubuntu Bionic) Importance: Undecided Status: New ** Changed in: linux (Ubuntu) Status: New => In Progress ** Changed in: linux (Ubuntu Bionic) Status: New => In Progress ** Changed in: linux (Ubuntu) Assignee: (unassigned) => dann frazier (dannf) ** Changed in: linux (Ubuntu Bionic) Assignee: (unassigned) => dann frazier (dannf) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1794156 Title: Fix potential corruption using SAS controller on HiSilicon arm64 boards Status in linux package in Ubuntu: In Progress Status in linux source package in Bionic: In Progress Bug description: [Impact] On HiSilicon ARM server systems, there is a potential for corruption when multiple CPUs are accessing the same controller. [Test Case] I don't have a reproducer for the failure, so will be regression tested only on D05 and D06 platforms. [Fix] commit 1c09b663168bb5fd8562234976b76115f2aebe91 Author: Xiaofei Tan Date: Wed Jul 18 22:14:32 2018 +0800 scsi: hisi_sas: add memory barrier in task delivery function [Regression Risk] The biggest regression risk I see would be a performance impact. But correct data is better than fast data :) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1794156/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1794151] Re: hisi_sas: Add SATA FIX check for v3 hw
** Changed in: linux (Ubuntu) Status: New => In Progress ** Changed in: linux (Ubuntu Bionic) Status: New => In Progress ** Changed in: linux (Ubuntu) Assignee: (unassigned) => dann frazier (dannf) ** Changed in: linux (Ubuntu Bionic) Assignee: (unassigned) => dann frazier (dannf) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1794151 Title: hisi_sas: Add SATA FIX check for v3 hw Status in linux package in Ubuntu: In Progress Status in linux source package in Bionic: In Progress Bug description: [Impact] If something goes wrong during phy initialization, the device may fail to come up. [Test Case] I don't have a way to inject a FIS error, so this will be smoke tested for regressions only. Needs to be tested on both D05 and D06 systems, since it touches code on both v2 and v3 hw. [Fix] commit f4e34f2a5dd9c0db19baad3f015c3abd5f2e0343 Author: Xiang Chen Date: Wed Jul 18 22:14:33 2018 +0800 scsi: hisi_sas: Add SATA FIS check for v3 hw [Regression Risk] Changes to a single driver which will be regression tested across the 2 platforms that use it. Since I can't inject such an error, the error handling code will go untested. But, if we enter the error handling code at all, the driver presumably was going to fail anyway. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1794151/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1794151] [NEW] hisi_sas: Add SATA FIX check for v3 hw
Public bug reported: [Impact] If something goes wrong during phy initialization, the device may fail to come up. [Test Case] I don't have a way to inject a FIS error, so this will be smoke tested for regressions only. Needs to be tested on both D05 and D06 systems, since it touches code on both v2 and v3 hw. [Fix] commit f4e34f2a5dd9c0db19baad3f015c3abd5f2e0343 Author: Xiang Chen Date: Wed Jul 18 22:14:33 2018 +0800 scsi: hisi_sas: Add SATA FIS check for v3 hw [Regression Risk] Changes to a single driver which will be regression tested across the 2 platforms that use it. Since I can't inject such an error, the error handling code will go untested. But, if we enter the error handling code at all, the driver presumably was going to fail anyway. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Affects: linux (Ubuntu Bionic) Importance: Undecided Status: New ** Also affects: linux (Ubuntu Bionic) Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1794151 Title: hisi_sas: Add SATA FIX check for v3 hw Status in linux package in Ubuntu: New Status in linux source package in Bionic: New Bug description: [Impact] If something goes wrong during phy initialization, the device may fail to come up. [Test Case] I don't have a way to inject a FIS error, so this will be smoke tested for regressions only. Needs to be tested on both D05 and D06 systems, since it touches code on both v2 and v3 hw. [Fix] commit f4e34f2a5dd9c0db19baad3f015c3abd5f2e0343 Author: Xiang Chen Date: Wed Jul 18 22:14:33 2018 +0800 scsi: hisi_sas: Add SATA FIS check for v3 hw [Regression Risk] Changes to a single driver which will be regression tested across the 2 platforms that use it. Since I can't inject such an error, the error handling code will go untested. But, if we enter the error handling code at all, the driver presumably was going to fail anyway. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1794151/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793841] Re: IP_SET modules not included in kernel build, prevents container functionality
Here's a test kernel with the IP_SET_* modules enabled: http://kernel.ubuntu.com/~kamal/lp1793841/ Please confirm that it enables your workflow. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-kvm in Ubuntu. https://bugs.launchpad.net/bugs/1793841 Title: IP_SET modules not included in kernel build, prevents container functionality Status in cloud-images: Invalid Status in linux-kvm package in Ubuntu: In Progress Status in linux-kvm source package in Bionic: In Progress Bug description: I would like to run Ubuntu Minimal Cloud Image as the base OS on which I run Kubernetes and various other containers, but it requires ipset and various kernel modules included in the build. Is there a way to have those added by default, or a documented process for me to modify the kernel on my Minimal Cloud images? I tried to use kube-router as a routing platform for connecting the containers between Ubuntu hosts, but this requires ipset. The error from kube-router: I0921 00:19:45.773157 1 kube-router.go:207] Running /usr/local/bin/kube-router version v0.2.0, built on 2018-09-12T08:03:59-0400, go1.10.3 Failed to run kube-router: Failed to create network routing controller: Failed to create ipset set on system: ipset v6.34: Kernel error received: set type not supported After some digging, it seems I need the following modules at least compiled into the kernel as modules: root@deva-controller0:~# cat "/boot/config-`uname -r`" | grep IP_SET CONFIG_IP_SET=y CONFIG_IP_SET_MAX=256 # CONFIG_IP_SET_BITMAP_IP is not set # CONFIG_IP_SET_BITMAP_IPMAC is not set # CONFIG_IP_SET_BITMAP_PORT is not set # CONFIG_IP_SET_HASH_IP is not set # CONFIG_IP_SET_HASH_IPMARK is not set # CONFIG_IP_SET_HASH_IPPORT is not set # CONFIG_IP_SET_HASH_IPPORTIP is not set # CONFIG_IP_SET_HASH_IPPORTNET is not set # CONFIG_IP_SET_HASH_IPMAC is not set # CONFIG_IP_SET_HASH_MAC is not set # CONFIG_IP_SET_HASH_NETPORTNET is not set # CONFIG_IP_SET_HASH_NET is not set # CONFIG_IP_SET_HASH_NETNET is not set # CONFIG_IP_SET_HASH_NETPORT is not set # CONFIG_IP_SET_HASH_NETIFACE is not set # CONFIG_IP_SET_LIST_SET is not set Ubuntu Release: ~# cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=18.04 DISTRIB_CODENAME=bionic DISTRIB_DESCRIPTION="Ubuntu 18.04.1 LTS" Any help is greatly appreciated. To manage notifications about this bug go to: https://bugs.launchpad.net/cloud-images/+bug/1793841/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793841] Re: IP_SET modules not included in kernel build, prevents container functionality
To clarify your comment #1, I could install linux-kvm-xenial now to get the modules, but your work will eventually add them to the default kernel used by Ubuntu Minimal Cloud images? Thanks in advance -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-kvm in Ubuntu. https://bugs.launchpad.net/bugs/1793841 Title: IP_SET modules not included in kernel build, prevents container functionality Status in cloud-images: Invalid Status in linux-kvm package in Ubuntu: In Progress Status in linux-kvm source package in Bionic: In Progress Bug description: I would like to run Ubuntu Minimal Cloud Image as the base OS on which I run Kubernetes and various other containers, but it requires ipset and various kernel modules included in the build. Is there a way to have those added by default, or a documented process for me to modify the kernel on my Minimal Cloud images? I tried to use kube-router as a routing platform for connecting the containers between Ubuntu hosts, but this requires ipset. The error from kube-router: I0921 00:19:45.773157 1 kube-router.go:207] Running /usr/local/bin/kube-router version v0.2.0, built on 2018-09-12T08:03:59-0400, go1.10.3 Failed to run kube-router: Failed to create network routing controller: Failed to create ipset set on system: ipset v6.34: Kernel error received: set type not supported After some digging, it seems I need the following modules at least compiled into the kernel as modules: root@deva-controller0:~# cat "/boot/config-`uname -r`" | grep IP_SET CONFIG_IP_SET=y CONFIG_IP_SET_MAX=256 # CONFIG_IP_SET_BITMAP_IP is not set # CONFIG_IP_SET_BITMAP_IPMAC is not set # CONFIG_IP_SET_BITMAP_PORT is not set # CONFIG_IP_SET_HASH_IP is not set # CONFIG_IP_SET_HASH_IPMARK is not set # CONFIG_IP_SET_HASH_IPPORT is not set # CONFIG_IP_SET_HASH_IPPORTIP is not set # CONFIG_IP_SET_HASH_IPPORTNET is not set # CONFIG_IP_SET_HASH_IPMAC is not set # CONFIG_IP_SET_HASH_MAC is not set # CONFIG_IP_SET_HASH_NETPORTNET is not set # CONFIG_IP_SET_HASH_NET is not set # CONFIG_IP_SET_HASH_NETNET is not set # CONFIG_IP_SET_HASH_NETPORT is not set # CONFIG_IP_SET_HASH_NETIFACE is not set # CONFIG_IP_SET_LIST_SET is not set Ubuntu Release: ~# cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=18.04 DISTRIB_CODENAME=bionic DISTRIB_DESCRIPTION="Ubuntu 18.04.1 LTS" Any help is greatly appreciated. To manage notifications about this bug go to: https://bugs.launchpad.net/cloud-images/+bug/1793841/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793841] Re: IP_SET modules not included in kernel build, prevents container functionality
Note: The IP_SET_* modules are already enabled in linux-kvm-xenial. ** No longer affects: linux-kvm (Ubuntu Xenial) ** Changed in: linux-kvm (Ubuntu Bionic) Status: New => In Progress ** Changed in: cloud-images Status: New => Invalid ** Changed in: linux-kvm (Ubuntu) Status: New => In Progress -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-kvm in Ubuntu. https://bugs.launchpad.net/bugs/1793841 Title: IP_SET modules not included in kernel build, prevents container functionality Status in cloud-images: Invalid Status in linux-kvm package in Ubuntu: In Progress Status in linux-kvm source package in Bionic: In Progress Bug description: I would like to run Ubuntu Minimal Cloud Image as the base OS on which I run Kubernetes and various other containers, but it requires ipset and various kernel modules included in the build. Is there a way to have those added by default, or a documented process for me to modify the kernel on my Minimal Cloud images? I tried to use kube-router as a routing platform for connecting the containers between Ubuntu hosts, but this requires ipset. The error from kube-router: I0921 00:19:45.773157 1 kube-router.go:207] Running /usr/local/bin/kube-router version v0.2.0, built on 2018-09-12T08:03:59-0400, go1.10.3 Failed to run kube-router: Failed to create network routing controller: Failed to create ipset set on system: ipset v6.34: Kernel error received: set type not supported After some digging, it seems I need the following modules at least compiled into the kernel as modules: root@deva-controller0:~# cat "/boot/config-`uname -r`" | grep IP_SET CONFIG_IP_SET=y CONFIG_IP_SET_MAX=256 # CONFIG_IP_SET_BITMAP_IP is not set # CONFIG_IP_SET_BITMAP_IPMAC is not set # CONFIG_IP_SET_BITMAP_PORT is not set # CONFIG_IP_SET_HASH_IP is not set # CONFIG_IP_SET_HASH_IPMARK is not set # CONFIG_IP_SET_HASH_IPPORT is not set # CONFIG_IP_SET_HASH_IPPORTIP is not set # CONFIG_IP_SET_HASH_IPPORTNET is not set # CONFIG_IP_SET_HASH_IPMAC is not set # CONFIG_IP_SET_HASH_MAC is not set # CONFIG_IP_SET_HASH_NETPORTNET is not set # CONFIG_IP_SET_HASH_NET is not set # CONFIG_IP_SET_HASH_NETNET is not set # CONFIG_IP_SET_HASH_NETPORT is not set # CONFIG_IP_SET_HASH_NETIFACE is not set # CONFIG_IP_SET_LIST_SET is not set Ubuntu Release: ~# cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=18.04 DISTRIB_CODENAME=bionic DISTRIB_DESCRIPTION="Ubuntu 18.04.1 LTS" Any help is greatly appreciated. To manage notifications about this bug go to: https://bugs.launchpad.net/cloud-images/+bug/1793841/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1781016] Re: Slow flood of do_IRQ: No irq for vector
Do you see this after S3? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1781016 Title: Slow flood of do_IRQ: No irq for vector Status in linux package in Ubuntu: Incomplete Bug description: Every few seconds I get something like this in my dmesg: [44984.933221] do_IRQ: 1.34 No irq handler for vector [44986.933976] do_IRQ: 1.34 No irq handler for vector [44991.935614] do_IRQ: 1.34 No irq handler for vector [45004.938590] do_IRQ: 1.34 No irq handler for vector [45005.939002] do_IRQ: 4.34 No irq handler for vector [45034.949161] do_IRQ: 4.34 No irq handler for vector [45051.954569] do_IRQ: 4.34 No irq handler for vector [45058.956019] do_IRQ: 4.34 No irq handler for vector [45062.957727] do_IRQ: 4.34 No irq handler for vector [45063.958204] do_IRQ: 4.34 No irq handler for vector [45073.961103] do_IRQ: 4.34 No irq handler for vector The numbers vary. Some examples are 4.34, 4.36, 1.34, 0.33, 6.34, 7.33, 5.37. Eventually dmesg's ring buffer is full and my entire log is just messages like above with varying #.## numbers. I researched it and tried disabling irqbalance. It had no effect, the messages continued. The system is a Ryzen 2700X with B350 chipset on Asus Prime B350-PLUS. I have 64GB of Kingston DDR4-2400 ECC memory and Samsung 960 PRO M.2 NVMe SSD, and an Intel I350-T4 quad port gigabit NIC. This issue never occurred before installing 18.03 on the same hardware. No overclocking whatsoever has ever been done to this machine. Also, I had to disable selective suspend on USB in this version to prevent major USB issues, which was not required in 17.10, that might be related. My system seems stable, but spurious IRQs can't be good. I'd like to resolve this if possible. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: linux-image-4.15.0-26-generic 4.15.0-26.28 ProcVersionSignature: Ubuntu 4.15.0-26.28-generic 4.15.18 Uname: Linux 4.15.0-26-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: gdm2145 F pulseaudio doug 3736 F pulseaudio /dev/snd/controlC1: gdm2145 F pulseaudio doug 3736 F pulseaudio Date: Tue Jul 10 12:49:00 2018 HibernationDevice: InstallationDate: Installed on 2017-06-26 (379 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) MachineType: System manufacturer System Product Name ProcEnviron: LANGUAGE=en_CA:en TERM=xterm-256color PATH=(custom, no user) LANG=en_CA.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-26-generic root=UUID=53446747-0814-48f7-b7c4-7fd7d7234d83 ro video=vesa:off vga=normal video=efifb:off usbcore.autosuspend=-1 usbhid.quirks=0x1e71:0x170e:0x4 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.15.0-26-generic N/A linux-backports-modules-4.15.0-26-generic N/A linux-firmware 1.173.1 RfKill: SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/19/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 4011 dmi.board.asset.tag: Default string dmi.board.name: PRIME B350-PLUS dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr4011:bd04/19/2018:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnPRIMEB350-PLUS:rvrRevX.0x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1781016/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1794110] Missing required logs.
This bug is missing log files that will aid in diagnosing the problem. While running an Ubuntu kernel (not a mainline or third-party kernel) please enter the following command in a terminal window: apport-collect 1794110 and then change the status of the bug to 'Confirmed'. If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'. This change has been made by an automated script, maintained by the Ubuntu Kernel Team. ** Changed in: linux (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1794110 Title: MPS (Max Payload Size) is not correctly programmed upon Hot Insertion NVMe PCIe SSD Status in The Dell-poweredge project: New Status in linux package in Ubuntu: Incomplete Bug description: Max Payload Size for the NVMe device is not getting programmed correctly. The OS is trying to set the device MPS to match Root Port which is greater than Capability of Device, instead of looking for lowest common denominator. This is fixed in upstream kernel version 4.19. Below are the commits that fix the issue. Please help include them in Ubuntu releases. PCI: Skip MPS logic for Virtual Functions (VFs) https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/pci/probe.c?h=v4.19-rc2&id=3dbe97efe8bf450b183d6dee2305cbc032e6b8a4 PCI: Match Root Port's MPS to endpoint's MPSS as necessary https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/pci/probe.c?h=v4.19-rc2&id=9f0e89359775ee21fe1ea732e34edb52aef5addf To manage notifications about this bug go to: https://bugs.launchpad.net/dell-poweredge/+bug/1794110/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1788549] Re: powerpc/powernv/pci: Work around races in PCI bridge enabling
IBM, could you please verify the PPA test kernels provided by the kernel team, and report back here. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1788549 Title: powerpc/powernv/pci: Work around races in PCI bridge enabling Status in The Ubuntu-power-systems project: In Progress Status in linux package in Ubuntu: In Progress Status in linux source package in Xenial: In Progress Status in linux source package in Bionic: In Progress Status in linux source package in Cosmic: In Progress Bug description: == Comment: #0 - Michael Ranweiler - 2018-08-21 13:52:03 == +++ This bug was initially created as a clone of Bug #170766 +++ Please apply the following kernel patch: https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git/commit/?h=next&id=db2173198b9513f7add8009f225afa1f1c79bcc6 powerpc/powernv/pci: Work around races in PCI bridge enabling The generic code is racy when multiple children of a PCI bridge try to enable it simultaneously. This leads to drivers trying to access a device through a not-yet-enabled bridge, and this EEH errors under various circumstances when using parallel driver probing. There is work going on to fix that properly in the PCI core but it will take some time. x86 gets away with it because (outside of hotplug), the BIOS enables all the bridges at boot time. This patch does the same thing on powernv by enabling all bridges that have child devices at boot time, thus avoiding subsequent races. It's suitable for backporting to stable and distros, while the proper PCI fix will probably be significantly more invasive. Signed-off-by: Benjamin Herrenschmidt Cc: sta...@vger.kernel.org Signed-off-by: Michael Ellerman == Comment: #2 - Michael Ranweiler - 2018-08-21 18:23:35 == This has some fuzz and also move it back from the pci macro to dev_err so we'll attach the backported patch. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-power-systems/+bug/1788549/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1794110] [NEW] MPS (Max Payload Size) is not correctly programmed upon Hot Insertion NVMe PCIe SSD
Public bug reported: Max Payload Size for the NVMe device is not getting programmed correctly. The OS is trying to set the device MPS to match Root Port which is greater than Capability of Device, instead of looking for lowest common denominator. This is fixed in upstream kernel version 4.19. Below are the commits that fix the issue. Please help include them in Ubuntu releases. PCI: Skip MPS logic for Virtual Functions (VFs) https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/pci/probe.c?h=v4.19-rc2&id=3dbe97efe8bf450b183d6dee2305cbc032e6b8a4 PCI: Match Root Port's MPS to endpoint's MPSS as necessary https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/pci/probe.c?h=v4.19-rc2&id=9f0e89359775ee21fe1ea732e34edb52aef5addf ** Affects: dell-poweredge Importance: Undecided Status: New ** Affects: linux (Ubuntu) Importance: Undecided Status: Incomplete ** Also affects: dell-poweredge Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1794110 Title: MPS (Max Payload Size) is not correctly programmed upon Hot Insertion NVMe PCIe SSD Status in The Dell-poweredge project: New Status in linux package in Ubuntu: Incomplete Bug description: Max Payload Size for the NVMe device is not getting programmed correctly. The OS is trying to set the device MPS to match Root Port which is greater than Capability of Device, instead of looking for lowest common denominator. This is fixed in upstream kernel version 4.19. Below are the commits that fix the issue. Please help include them in Ubuntu releases. PCI: Skip MPS logic for Virtual Functions (VFs) https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/pci/probe.c?h=v4.19-rc2&id=3dbe97efe8bf450b183d6dee2305cbc032e6b8a4 PCI: Match Root Port's MPS to endpoint's MPSS as necessary https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/pci/probe.c?h=v4.19-rc2&id=9f0e89359775ee21fe1ea732e34edb52aef5addf To manage notifications about this bug go to: https://bugs.launchpad.net/dell-poweredge/+bug/1794110/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1788098] Re: Avoid migration issues with aligned 2MB THB
** Tags removed: triage-g ** Tags added: triage-a -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1788098 Title: Avoid migration issues with aligned 2MB THB Status in The Ubuntu-power-systems project: In Progress Status in linux package in Ubuntu: In Progress Status in qemu package in Ubuntu: Invalid Status in linux source package in Bionic: In Progress Status in linux source package in Cosmic: In Progress Bug description: FYI: This blocks bug 1781526 - once this one here is resolved we can go on with SRU considerations for 1781526 --- Comment From jhop...@us.ibm.com 2018-08-20 17:12 EDT--- Hi, in some environments it was observed that this qemu patch to enable THP made it more likely to hit guest migration issues, however the following kernel patch resolves those migration issues: https://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc.git/commit/?h=kvm-ppc-next&id=c066fafc595eef5ae3c83ae3a8305956b8c3ef15 KVM: PPC: Book3S HV: Use correct pagesize in kvm_unmap_radix() Once merged upstream, it would be good to include that change as well to avoid potential migration problems. Should I open a new bug for that or is it better to track here? Note Paelzer: I have not seen related migration issues myself, but it seems reasonable and confirmed by IBM. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-power-systems/+bug/1788098/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793841] Re: IP_SET modules not included in kernel build, prevents container functionality
** Changed in: linux-kvm (Ubuntu Xenial) Assignee: (unassigned) => Kamal Mostafa (kamalmostafa) ** Changed in: linux-kvm (Ubuntu Bionic) Assignee: (unassigned) => Kamal Mostafa (kamalmostafa) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-kvm in Ubuntu. https://bugs.launchpad.net/bugs/1793841 Title: IP_SET modules not included in kernel build, prevents container functionality Status in cloud-images: New Status in linux-kvm package in Ubuntu: New Status in linux-kvm source package in Xenial: New Status in linux-kvm source package in Bionic: New Bug description: I would like to run Ubuntu Minimal Cloud Image as the base OS on which I run Kubernetes and various other containers, but it requires ipset and various kernel modules included in the build. Is there a way to have those added by default, or a documented process for me to modify the kernel on my Minimal Cloud images? I tried to use kube-router as a routing platform for connecting the containers between Ubuntu hosts, but this requires ipset. The error from kube-router: I0921 00:19:45.773157 1 kube-router.go:207] Running /usr/local/bin/kube-router version v0.2.0, built on 2018-09-12T08:03:59-0400, go1.10.3 Failed to run kube-router: Failed to create network routing controller: Failed to create ipset set on system: ipset v6.34: Kernel error received: set type not supported After some digging, it seems I need the following modules at least compiled into the kernel as modules: root@deva-controller0:~# cat "/boot/config-`uname -r`" | grep IP_SET CONFIG_IP_SET=y CONFIG_IP_SET_MAX=256 # CONFIG_IP_SET_BITMAP_IP is not set # CONFIG_IP_SET_BITMAP_IPMAC is not set # CONFIG_IP_SET_BITMAP_PORT is not set # CONFIG_IP_SET_HASH_IP is not set # CONFIG_IP_SET_HASH_IPMARK is not set # CONFIG_IP_SET_HASH_IPPORT is not set # CONFIG_IP_SET_HASH_IPPORTIP is not set # CONFIG_IP_SET_HASH_IPPORTNET is not set # CONFIG_IP_SET_HASH_IPMAC is not set # CONFIG_IP_SET_HASH_MAC is not set # CONFIG_IP_SET_HASH_NETPORTNET is not set # CONFIG_IP_SET_HASH_NET is not set # CONFIG_IP_SET_HASH_NETNET is not set # CONFIG_IP_SET_HASH_NETPORT is not set # CONFIG_IP_SET_HASH_NETIFACE is not set # CONFIG_IP_SET_LIST_SET is not set Ubuntu Release: ~# cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=18.04 DISTRIB_CODENAME=bionic DISTRIB_DESCRIPTION="Ubuntu 18.04.1 LTS" Any help is greatly appreciated. To manage notifications about this bug go to: https://bugs.launchpad.net/cloud-images/+bug/1793841/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
Re: [Kernel-packages] [Bug 1759836] Re: systemd-udevd consumes 100% of CPU
I've found that just sticking with kernel 4.13 has been working fine for me. It works around this problem and for my use case hasn't had any downsides. On Sun, Sep 23, 2018 at 2:15 PM SB <1759...@bugs.launchpad.net> wrote: > why is this still not fixed, it is quite a showstopper on dell systems > > -- > You received this bug notification because you are subscribed to the bug > report. > https://bugs.launchpad.net/bugs/1759836 > > Title: > systemd-udevd consumes 100% of CPU > > To manage notifications about this bug go to: > https://bugs.launchpad.net/kernel/+bug/1759836/+subscriptions > -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1759836 Title: systemd-udevd consumes 100% of CPU Status in linux: Confirmed Status in The Ubuntu Power Consumption Project: New Status in bluez package in Ubuntu: Invalid Status in linux package in Ubuntu: Incomplete Status in systemd package in Ubuntu: Confirmed Bug description: The systemd-udevd proccess consumes 100% of a thread everytime, but i'm not noticing any difference in my computer. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: systemd 237-3ubuntu6 ProcVersionSignature: Ubuntu 4.15.0-13.14-generic 4.15.10 Uname: Linux 4.15.0-13-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.20.9-0ubuntu2 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Thu Mar 29 08:52:54 2018 InstallationDate: Installed on 2018-03-05 (23 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Alpha amd64 (20180304) MachineType: Dell Inc. Inspiron N5010 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-13-generic root=UUID=3c29e292-f1ae-45e1-a0ed-a82524278ce1 ro quiet splash vt.handoff=1 SourcePackage: systemd SystemdDelta: [EXTENDED] /lib/systemd/system/rc-local.service → /lib/systemd/system/rc-local.service.d/debian.conf [EXTENDED] /lib/systemd/system/user@.service → /lib/systemd/system/user@.service.d/timeout.conf 2 overridden configuration files found. UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 01/25/2011 dmi.bios.vendor: Dell Inc. dmi.bios.version: A12 dmi.board.name: 08R0GW dmi.board.vendor: Dell Inc. dmi.board.version: A12 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: A12 dmi.modalias: dmi:bvnDellInc.:bvrA12:bd01/25/2011:svnDellInc.:pnInspironN5010:pvrA12:rvnDellInc.:rn08R0GW:rvrA12:cvnDellInc.:ct8:cvrA12: dmi.product.name: Inspiron N5010 dmi.product.version: A12 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/kernel/+bug/1759836/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1778844] Re: ISST-LTE:PNV:Ubuntu180401:Witherspoon:woo: After triggering crash, kdump is not working and system enters into initramfs state
** Changed in: ubuntu-power-systems Status: Incomplete => Triaged -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to makedumpfile in Ubuntu. https://bugs.launchpad.net/bugs/1778844 Title: ISST-LTE:PNV:Ubuntu180401:Witherspoon:woo: After triggering crash,kdump is not working and system enters into initramfs state Status in The Ubuntu-power-systems project: Triaged Status in initramfs-tools package in Ubuntu: New Status in linux package in Ubuntu: New Status in makedumpfile package in Ubuntu: New Status in initramfs-tools source package in Bionic: New Status in linux source package in Bionic: New Status in makedumpfile source package in Bionic: New Bug description: Problem Description: === After triggering crash ,kdump is not working & system enters into initramfs state Steps to re-create: == >. woo is installed ubuntu180401 kernel root@woo:~# uname -a Linux woo 4.15.0-23-generic #25-Ubuntu SMP Wed May 23 17:59:00 UTC 2018 ppc64le ppc64le ppc64le GNU/Linux root@woo:~# >. Crashkernel value as below root@woo:~# free -h totalusedfree shared buff/cache available Mem: 503G2.0G501G 13M279M 499G Swap: 2.0G 0B2.0G root@woo:~# cat /proc/cmdline root=UUID=45bb7eb2-4c61-425d-8bf9-4e6f16829ddb ro splash quiet crashkernel=8192M > kdump status root@woo:~# kdump-config status current state : ready to kdump root@woo:~# kdump-config show DUMP_MODE:kdump USE_KDUMP:1 KDUMP_SYSCTL: kernel.panic_on_oops=1 KDUMP_COREDIR:/var/crash crashkernel addr: /var/lib/kdump/vmlinuz: symbolic link to /boot/vmlinux-4.15.0-23-generic kdump initrd: /var/lib/kdump/initrd.img: symbolic link to /var/lib/kdump/initrd.img-4.15.0-23-generic current state:ready to kdump kexec command: /sbin/kexec -p --command-line="root=UUID=45bb7eb2-4c61-425d-8bf9-4e6f16829ddb ro splash quiet nr_cpus=1 systemd.unit=kdump-tools.service irqpoll noirqdistrib nousb" --initrd=/var/lib/kdump/initrd.img /var/lib/kdump/vmlinuz root@woo:~# dmesg | grep Reser [0.00] Reserving 8192MB of memory at 128MB for crashkernel (System RAM: 524288MB) [0.00] cma: Reserved 26224 MiB at 0x20399500 [3.545490] Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term "Broadcom" refers to Broadcom Limited and/or its subsidiaries. > Triggered crash root@woo:~# echo 1 > /proc/sys/kernel/sysrq root@woo:~# echo c > /proc/sysrq-trigger [ 73.056308] sysrq: SysRq : Trigger a crash [ 73.056357] Unable to handle kernel paging request for data at address 0x [ 73.056459] Faulting instruction address: 0xc07f24c8 [ 73.056543] Oops: Kernel access of bad area, sig: 11 [#1] [ 73.056609] LE SMP NR_CPUS=2048 NUMA PowerNV [ 73.056668] Modules linked in: rdma_ucm(OE) ib_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_uverbs(OE) ib_umad(OE) esp6_offload esp6 esp4_offload esp4 xfrm_algo mlx5_fpga_tools(OE) mlx4_en(OE) mlx4_ib(OE) mlx4_core(OE) rpcsec_gss_krb5 nfsv4 nfs fscache binfmt_misc idt_89hpesx vmx_crypto crct10dif_vpmsum ofpart cmdlinepart ipmi_powernv ipmi_devintf at24 powernv_flash ipmi_msghandler ibmpowernv mtd opal_prd uio_pdrv_genirq uio nfsd auth_rpcgss nfs_acl lockd sch_fq_codel grace sunrpc knem(OE) ip_tables x_tables autofs4 btrfs xor zstd_compress raid6_pq mlx5_ib(OE) ib_core(OE) nouveau lpfc ast i2c_algo_bit ttm mlx5_core(OE) drm_kms_helper mlxfw(OE) nvmet_fc devlink syscopyarea nvmet mlx_compat(OE) sysfillrect cxl nvme_fc sysimgblt fb_sys_fops nvme_fabrics nvme ahci crc32c_vpmsum drm scsi_transport_fc [ 73.057601] tg3 libahci nvme_core pnv_php [ 73.057652] CPU: 44 PID: 4626 Comm: bash Tainted: G OE 4.15.0-23-generic #25-Ubuntu [ 73.057767] NIP: c07f24c8 LR: c07f3568 CTR: c07f24a0 [ 73.057868] REGS: c03f8269f9f0 TRAP: 0300 Tainted: G OE (4.15.0-23-generic) [ 73.057986] MSR: 90009033 CR: 2822 XER: 2004 [ 73.058099] CFAR: c07f3564 DAR: DSISR: 4200 SOFTE: 1 [ 73.058099] GPR00: c07f3568 c03f8269fc70 c16eaf00 0063 [ 73.058099] GPR04: c03fef47ce18 c03fef494368 90009033 31da0058 [ 73.058099] GPR08: 0007 0001 90001003 [ 73.058099] GPR12: c07f24a0 c7a2e400 0e4fa497c900 [ 73.058099] GPR16: 0e4f79cc94b0 0e4f79d567e0 0e4f79d88204 0e4f79d56818 [ 73.058099] GPR20: 0e4f79d8d5d8 0001 7efce644 [ 73.058099] GPR24: 7efce640 0e4f79d8afb4 c15e9aa8 0002 [ 73.058099
[Kernel-packages] [Bug 1793841] Re: IP_SET modules not included in kernel build, prevents container functionality
** Also affects: linux-kvm (Ubuntu) Importance: Undecided Status: New ** Also affects: linux-kvm (Ubuntu Bionic) Importance: Undecided Status: New ** Also affects: linux-kvm (Ubuntu Xenial) Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-kvm in Ubuntu. https://bugs.launchpad.net/bugs/1793841 Title: IP_SET modules not included in kernel build, prevents container functionality Status in cloud-images: New Status in linux-kvm package in Ubuntu: New Status in linux-kvm source package in Xenial: New Status in linux-kvm source package in Bionic: New Bug description: I would like to run Ubuntu Minimal Cloud Image as the base OS on which I run Kubernetes and various other containers, but it requires ipset and various kernel modules included in the build. Is there a way to have those added by default, or a documented process for me to modify the kernel on my Minimal Cloud images? I tried to use kube-router as a routing platform for connecting the containers between Ubuntu hosts, but this requires ipset. The error from kube-router: I0921 00:19:45.773157 1 kube-router.go:207] Running /usr/local/bin/kube-router version v0.2.0, built on 2018-09-12T08:03:59-0400, go1.10.3 Failed to run kube-router: Failed to create network routing controller: Failed to create ipset set on system: ipset v6.34: Kernel error received: set type not supported After some digging, it seems I need the following modules at least compiled into the kernel as modules: root@deva-controller0:~# cat "/boot/config-`uname -r`" | grep IP_SET CONFIG_IP_SET=y CONFIG_IP_SET_MAX=256 # CONFIG_IP_SET_BITMAP_IP is not set # CONFIG_IP_SET_BITMAP_IPMAC is not set # CONFIG_IP_SET_BITMAP_PORT is not set # CONFIG_IP_SET_HASH_IP is not set # CONFIG_IP_SET_HASH_IPMARK is not set # CONFIG_IP_SET_HASH_IPPORT is not set # CONFIG_IP_SET_HASH_IPPORTIP is not set # CONFIG_IP_SET_HASH_IPPORTNET is not set # CONFIG_IP_SET_HASH_IPMAC is not set # CONFIG_IP_SET_HASH_MAC is not set # CONFIG_IP_SET_HASH_NETPORTNET is not set # CONFIG_IP_SET_HASH_NET is not set # CONFIG_IP_SET_HASH_NETNET is not set # CONFIG_IP_SET_HASH_NETPORT is not set # CONFIG_IP_SET_HASH_NETIFACE is not set # CONFIG_IP_SET_LIST_SET is not set Ubuntu Release: ~# cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=18.04 DISTRIB_CODENAME=bionic DISTRIB_DESCRIPTION="Ubuntu 18.04.1 LTS" Any help is greatly appreciated. To manage notifications about this bug go to: https://bugs.launchpad.net/cloud-images/+bug/1793841/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1794055] Re: [Witherspoon-DD2.2][Ubu 18.10] [4.18.0-7-generic ] OS booting thrown with nouveau errors; OS booted successfully
Looks like we don't ship the nvidia/gv100/gr/sw_nonctx.bin in our linux- firmware package. This firmware is also missing in git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux- firmware.git and would need to be upstreamed first to the linux-firmware tree so that we can sync to Ubuntu. Currently the following nvidia firmware is available upstream: linux-firmware$ find . -name sw_nonctx.bin ./nvidia/gm204/gr/sw_nonctx.bin ./nvidia/gp107/gr/sw_nonctx.bin ./nvidia/gp108/gr/sw_nonctx.bin ./nvidia/gm206/gr/sw_nonctx.bin ./nvidia/gp100/gr/sw_nonctx.bin ./nvidia/gm20b/gr/sw_nonctx.bin ./nvidia/gp10b/gr/sw_nonctx.bin ./nvidia/gp106/gr/sw_nonctx.bin ./nvidia/gm200/gr/sw_nonctx.bin ./nvidia/gk20a/sw_nonctx.bin ./nvidia/gp104/gr/sw_nonctx.bin ./nvidia/gp102/gr/sw_nonctx.bin ** Changed in: linux (Ubuntu) Assignee: Ubuntu on IBM Power Systems Bug Triage (ubuntu-power-triage) => Canonical Kernel Team (canonical-kernel-team) ** Changed in: linux (Ubuntu) Importance: Undecided => High -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1794055 Title: [Witherspoon-DD2.2][Ubu 18.10] [4.18.0-7-generic ] OS booting thrown with nouveau errors; OS booted successfully Status in The Ubuntu-power-systems project: New Status in linux package in Ubuntu: New Bug description: == Comment: #0 - Kalpana Shetty - 2018-09-15 23:55:13 == ---Problem Description--- [Witherspoon-DD2.2][Ubu 18.10] [4.18.0-7-generic ] OS booting thrown with nouveau errors Contact Information = kalsh...@in.ibm.com, preeti.tha...@in.ibm.com ---uname output--- root@ltc-wcwsp3:~# uname -a Linux ltc-wcwsp3 4.18.0-7-generic #8-Ubuntu SMP Tue Aug 28 18:20:56 UTC 2018 ppc64le ppc64le ppc64le GNU/Linux Machine Type = Witherspoon DD2.2 LC Steps: 1. Netinstall Ubu 18.10 on Witherspoon-LC-DD2.2 6GPU system --> PASS 2. Boot the OS ---> PASS but error thrown on the console related open source NVIDIA driver. [Disk: sdb2 / c0302064-c5a3-49a7-8bd4-402283e6fcbe] Ubuntu, with Linux 4.18.0-7-generic (recovery mode) Ubuntu, with Linux 4.18.0-7-generic Ubuntu [Disk: nvme0n1p2 / c5d042f1-812e-49e0-94b2-ade477084061] Ubuntu, with Linux 4.18.0-7-generic (recovery mode) * Ubuntu, with Linux 4.18.0-7-generic Ubuntu System information System configuration System status log Language Rescan devices Retrieve config from URL Plugins (0) Exit to shell ?? Enter=accept, e=edit, n=new, x=exit, l=language, g=log, h=help The system is going down NOW! Sent SIGTERM to all processes Sent SIGKILL to all processes [ 57.513329] kexec_core: Starting new kernel [ 149.358703978,5] OPAL: Switch to big-endian OS [ 153.355498935,5] OPAL: Switch to little-endian OS [2.943735] integrity: Unable to open file: /etc/keys/x509_ima.der (-2) [2.943738] integrity: Unable to open file: /etc/keys/x509_evm.der (-2) [3.132733] vio vio: uevent: failed to send synthetic uevent [4.058698] nouveau 0004:04:00.0: gr: failed to load gr/sw_nonctx [4.129215] nouveau 0004:04:00.0: DRM: failed to create kernel channel, -22 [ 19.126509] nouveau 0004:04:00.0: DRM: failed to idle channel 0 [DRM] [ 19.281450] nouveau 0004:05:00.0: gr: failed to load gr/sw_nonctx [ 19.351322] nouveau 0004:05:00.0: DRM: failed to create kernel channel, -22 [ 34.350509] nouveau 0004:05:00.0: DRM: failed to idle channel 0 [DRM] [ 34.502063] nouveau 0004:06:00.0: gr: failed to load gr/sw_nonctx [ 34.572144] nouveau 0004:06:00.0: DRM: failed to create kernel channel, -22 [ 49.570509] nouveau 0004:06:00.0: DRM: failed to idle channel 0 [DRM] [ 49.734754] nouveau 0035:03:00.0: gr: failed to load gr/sw_nonctx [ 49.805057] nouveau 0035:03:00.0: DRM: failed to create kernel channel, -22 [ 64.802510] nouveau 0035:03:00.0: DRM: failed to idle channel 0 [DRM] [ 64.955442] nouveau 0035:04:00.0: gr: failed to load gr/sw_nonctx [ 65.025537] nouveau 0035:04:00.0: DRM: failed to create kernel channel, -22 [ 80.022509] nouveau 0035:04:00.0: DRM: failed to idle channel 0 [DRM] [ 80.181169] nouveau 0035:05:00.0: gr: failed to load gr/sw_nonctx [ 80.251481] nouveau 0035:05:00.0: DRM: failed to create kernel channel, -22 [ 95.250509] nouveau 0035:05:00.0: DRM: failed to idle channel 0 [DRM] /dev/nvme0n1p2: recovering journal /dev/nvme0n1p2: clean, 72569/97681408 files, 7384418/390701312 blocks -.mount kmod-static-nodes.service dev-hugepages.mount dev-mqueue.mount sys-kernel-debug.mount ufw.service lvm2-lvmetad.service systemd-remount-fs.service systemd-random-seed.service systemd-sysusers.service keyboard-setup.service systemd-tmpfiles-setup-dev.service lvm2-moni
[Kernel-packages] [Bug 1789924] Re: Missing Intel GPU pci-id's
Hello Timo, or anyone else affected, Accepted xorg-server into bionic-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/xorg- server/2:1.19.6-1ubuntu4.1 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested and change the tag from verification-needed-bionic to verification-done-bionic. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed-bionic. In either case, without details of your testing we will not be able to proceed. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping! N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days. ** Changed in: xorg-server (Ubuntu Bionic) Status: New => Fix Committed ** Tags added: verification-needed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1789924 Title: Missing Intel GPU pci-id's Status in libdrm package in Ubuntu: Fix Released Status in linux package in Ubuntu: Fix Committed Status in mesa package in Ubuntu: New Status in xorg-server package in Ubuntu: Fix Released Status in libdrm source package in Bionic: New Status in linux source package in Bionic: Fix Committed Status in mesa source package in Bionic: New Status in xorg-server source package in Bionic: Fix Committed Bug description: [Impact] There are some new Intel GPU pci-id's that need to be added to several places: 0x3E98 0x87C0 and to make future additions easier, add platform definitions for Whiskey Lake and Amber Lake too. [Test case] Check that the user session uses the proper driver on these systems. [Regression potential] none, these just add pci-id's and platform definitions To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libdrm/+bug/1789924/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1794088] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1794088 Title: linux-image-4.15.0-34-generic under VirtualBox does not boot Status in linux package in Ubuntu: Confirmed Bug description: linux-image-4.15.0-29-generic luckily works, still. With the -34, the system hangs at boot, all other settings being the same. Running on host system OSX 10.13.6 on a 2.6GHz i7 (MacBookPro15,1). ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: linux-image-4.15.0-34-generic 4.15.0-34.37 ProcVersionSignature: Ubuntu 4.15.0-29.31-generic 4.15.18 Uname: Linux 4.15.0-29-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ehaase 2561 F pulseaudio CurrentDesktop: KDE Date: Mon Sep 24 15:15:47 2018 InstallationDate: Installed on 2017-04-27 (515 days ago) InstallationMedia: Kubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412) IwConfig: docker0 no wireless extensions. enp0s3no wireless extensions. lono wireless extensions. Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: innotek GmbH VirtualBox ProcFB: 0 vboxdrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-29-generic root=UUID=2b0c0d65-6797-47cc-ac98-ea184260ce95 ro quiet splash RelatedPackageVersions: linux-restricted-modules-4.15.0-29-generic N/A linux-backports-modules-4.15.0-29-generic N/A linux-firmware 1.173.1 RfKill: SourcePackage: linux StagingDrivers: vboxvideo UpgradeStatus: Upgraded to bionic on 2018-05-22 (124 days ago) dmi.bios.date: 12/01/2006 dmi.bios.vendor: innotek GmbH dmi.bios.version: VirtualBox dmi.board.name: VirtualBox dmi.board.vendor: Oracle Corporation dmi.board.version: 1.2 dmi.chassis.type: 1 dmi.chassis.vendor: Oracle Corporation dmi.modalias: dmi:bvninnotekGmbH:bvrVirtualBox:bd12/01/2006:svninnotekGmbH:pnVirtualBox:pvr1.2:rvnOracleCorporation:rnVirtualBox:rvr1.2:cvnOracleCorporation:ct1:cvr: dmi.product.family: Virtual Machine dmi.product.name: VirtualBox dmi.product.version: 1.2 dmi.sys.vendor: innotek GmbH To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1794088/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1792660] Re: nvme name floated after boot with 4.15.0 kernel
Hi Zhanglei, I've faced this issue some time ago - in fact, it's not a bug, but some annoyance caused by the multipath introduction in the nvme driver. It started recently, after [0] - the introduction of NVMe multipath brought a change in the way namespaces' "identity" is calculated. Basically, another level of indirection was added, now we have the "ns_head" entity, also driver started to use the subsystem instance instead of the ctrl instance (even with no multipath used), so we may have this link "mismatch" you have observed. Recently this was improved by [1], so now if user sets the kernel command-line parameter "nvme_core.multipath=0", the old behavior was restored. Can you give it a try? This fix was added in 4.15.0-34 bionic's kernel (same for Xenial's HWE kernel). Also, this is the same old discussion of the SCSI naming sdX - we shouldn't rely on the numbering, usually it's recommended to use some permanent index, like the partition UUID. Cheers, Guilherme [0] ed754e5dee ("nvme: track shared namespaces") https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ed754e5dee [1] a785dbccd9 ("nvme/multipath: Fix multipath disabled naming collisions") https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=a785dbccd9 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1792660 Title: nvme name floated after boot with 4.15.0 kernel Status in linux package in Ubuntu: Triaged Status in linux source package in Bionic: Triaged Bug description: nvme device name such as /dev/nvme?n?p? would be floated that is symbol link to different real ssd device after reboot in 4.15.0 kernel for 16.04.5 HWE and 18.04 GA-kernel. This are not found on 16.04.5 GA- kernel ( 4.4.0) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1792660/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1794088] [NEW] linux-image-4.15.0-34-generic under VirtualBox does not boot
Public bug reported: linux-image-4.15.0-29-generic luckily works, still. With the -34, the system hangs at boot, all other settings being the same. Running on host system OSX 10.13.6 on a 2.6GHz i7 (MacBookPro15,1). ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: linux-image-4.15.0-34-generic 4.15.0-34.37 ProcVersionSignature: Ubuntu 4.15.0-29.31-generic 4.15.18 Uname: Linux 4.15.0-29-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ehaase 2561 F pulseaudio CurrentDesktop: KDE Date: Mon Sep 24 15:15:47 2018 InstallationDate: Installed on 2017-04-27 (515 days ago) InstallationMedia: Kubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412) IwConfig: docker0 no wireless extensions. enp0s3no wireless extensions. lono wireless extensions. Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: innotek GmbH VirtualBox ProcFB: 0 vboxdrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-29-generic root=UUID=2b0c0d65-6797-47cc-ac98-ea184260ce95 ro quiet splash RelatedPackageVersions: linux-restricted-modules-4.15.0-29-generic N/A linux-backports-modules-4.15.0-29-generic N/A linux-firmware 1.173.1 RfKill: SourcePackage: linux StagingDrivers: vboxvideo UpgradeStatus: Upgraded to bionic on 2018-05-22 (124 days ago) dmi.bios.date: 12/01/2006 dmi.bios.vendor: innotek GmbH dmi.bios.version: VirtualBox dmi.board.name: VirtualBox dmi.board.vendor: Oracle Corporation dmi.board.version: 1.2 dmi.chassis.type: 1 dmi.chassis.vendor: Oracle Corporation dmi.modalias: dmi:bvninnotekGmbH:bvrVirtualBox:bd12/01/2006:svninnotekGmbH:pnVirtualBox:pvr1.2:rvnOracleCorporation:rnVirtualBox:rvr1.2:cvnOracleCorporation:ct1:cvr: dmi.product.family: Virtual Machine dmi.product.name: VirtualBox dmi.product.version: 1.2 dmi.sys.vendor: innotek GmbH ** Affects: linux (Ubuntu) Importance: Undecided Status: Confirmed ** Tags: amd64 apport-bug bionic staging -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1794088 Title: linux-image-4.15.0-34-generic under VirtualBox does not boot Status in linux package in Ubuntu: Confirmed Bug description: linux-image-4.15.0-29-generic luckily works, still. With the -34, the system hangs at boot, all other settings being the same. Running on host system OSX 10.13.6 on a 2.6GHz i7 (MacBookPro15,1). ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: linux-image-4.15.0-34-generic 4.15.0-34.37 ProcVersionSignature: Ubuntu 4.15.0-29.31-generic 4.15.18 Uname: Linux 4.15.0-29-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ehaase 2561 F pulseaudio CurrentDesktop: KDE Date: Mon Sep 24 15:15:47 2018 InstallationDate: Installed on 2017-04-27 (515 days ago) InstallationMedia: Kubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412) IwConfig: docker0 no wireless extensions. enp0s3no wireless extensions. lono wireless extensions. Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: innotek GmbH VirtualBox ProcFB: 0 vboxdrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-29-generic root=UUID=2b0c0d65-6797-47cc-ac98-ea184260ce95 ro quiet splash RelatedPackageVersions: linux-restricted-modules-4.15.0-29-generic N/A linux-backports-modules-4.15.0-29-generic N/A linux-firmware 1.173.1 RfKill: SourcePackage: linux StagingDrivers: vboxvideo UpgradeStatus: Upgraded to bionic on 2018-05-22 (124 days ago) dmi.bios.date: 12/01/2006 dmi.bios.vendor: innotek GmbH dmi.bios.version: VirtualBox dmi.board.name: VirtualBox dmi.board.vendor: Oracle Corporation dmi.board.version: 1.2 dmi.chassis.type: 1 dmi.chassis.vendor: Oracle Corporation dmi.modalias: dmi:bvninnotekGmbH:bvrVirtualBox:bd12/01/2006:svninnotekGmbH:pnVirtualBox:pvr1.2:rvnOracleCorporation:rnVirtualBox:rvr1.2:cvnOracleCorporation:ct1:cvr: dmi.product.family: Virtual Machine dmi.product.name: VirtualBox dmi.product.version: 1.2 dmi.sys.vendor: innotek GmbH To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1794088/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1792660] Re: nvme name floated after boot with 4.15.0 kernel
** Changed in: linux (Ubuntu) Assignee: (unassigned) => Guilherme G. Piccoli (gpiccoli) ** Changed in: linux (Ubuntu Bionic) Assignee: (unassigned) => Guilherme G. Piccoli (gpiccoli) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1792660 Title: nvme name floated after boot with 4.15.0 kernel Status in linux package in Ubuntu: Triaged Status in linux source package in Bionic: Triaged Bug description: nvme device name such as /dev/nvme?n?p? would be floated that is symbol link to different real ssd device after reboot in 4.15.0 kernel for 16.04.5 HWE and 18.04 GA-kernel. This are not found on 16.04.5 GA- kernel ( 4.4.0) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1792660/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1794074] Missing required logs.
This bug is missing log files that will aid in diagnosing the problem. While running an Ubuntu kernel (not a mainline or third-party kernel) please enter the following command in a terminal window: apport-collect 1794074 and then change the status of the bug to 'Confirmed'. If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'. This change has been made by an automated script, maintained by the Ubuntu Kernel Team. ** Changed in: linux (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1794074 Title: xhci_hcd :25:00.0: ERROR unknown event type 15 Status in linux package in Ubuntu: Incomplete Bug description: Using Ubuntu 18.04 as a bare-metal VM server via libvirtd qemu-kvm, after some time with the guests running, xhci freaks out and thinks the server died and disables all USB devices. xhci_hcd :25:00.0: ERROR unknown event type 15 xhci_hcd :25:00.0: xHCI host not responding to stop endpoint command. xhci_hcd :25:00.0: xHCI host controller not responding, assume dead xhci_hcd :25:00.0: HC died; cleaning up To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1794074/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1794074] [NEW] xhci_hcd 0000:25:00.0: ERROR unknown event type 15
Public bug reported: Using Ubuntu 18.04 as a bare-metal VM server via libvirtd qemu-kvm, after some time with the guests running, xhci freaks out and thinks the server died and disables all USB devices. xhci_hcd :25:00.0: ERROR unknown event type 15 xhci_hcd :25:00.0: xHCI host not responding to stop endpoint command. xhci_hcd :25:00.0: xHCI host controller not responding, assume dead xhci_hcd :25:00.0: HC died; cleaning up ** Affects: linux (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1794074 Title: xhci_hcd :25:00.0: ERROR unknown event type 15 Status in linux package in Ubuntu: New Bug description: Using Ubuntu 18.04 as a bare-metal VM server via libvirtd qemu-kvm, after some time with the guests running, xhci freaks out and thinks the server died and disables all USB devices. xhci_hcd :25:00.0: ERROR unknown event type 15 xhci_hcd :25:00.0: xHCI host not responding to stop endpoint command. xhci_hcd :25:00.0: xHCI host controller not responding, assume dead xhci_hcd :25:00.0: HC died; cleaning up To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1794074/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1778011] Re: SRU: PRIME Power Saving mode draws too much power
@Arthur: you probably need to install the 32 bit libraries manually from -proposed. Try with the following command: sudo apt install libnvidia-gl-390:i386/bionic-proposed as for 2), I would need some logs such as /var/log/gpu-manager.log after reproducing the problem. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to nvidia-settings in Ubuntu. https://bugs.launchpad.net/bugs/1778011 Title: SRU: PRIME Power Saving mode draws too much power Status in HWE Next: New Status in gdm3 package in Ubuntu: Fix Released Status in nvidia-graphics-drivers-390 package in Ubuntu: Fix Released Status in nvidia-prime package in Ubuntu: Fix Released Status in nvidia-settings package in Ubuntu: Fix Released Status in ubuntu-drivers-common package in Ubuntu: Fix Released Status in gdm3 source package in Bionic: Fix Committed Status in nvidia-graphics-drivers-390 source package in Bionic: Fix Committed Status in nvidia-prime source package in Bionic: Fix Committed Status in nvidia-settings source package in Bionic: Fix Committed Status in ubuntu-drivers-common source package in Bionic: Fix Committed Bug description: SRU Request: [Impact] Relying on the nouveau driver and on the vga switcheroo (to get around a change in systemd LP: #1777099) caused increased power consumption, and slowed down the switching process. Furthermore, if the main X/Xwayland session was started by Gdm when the nvidia driver was loaded, the session will keep the nvidia module loaded, and prevent the system from switching off the dGPU. Also, the nouveau driver will be loaded, if nvidia is not, and this can cause problems to unsupported NVIDIA GPUs. The solution involves the following changes: 1) Solving the problem in systemd (LP: #1777099) 2) Adding code in gpu-manager and in nvidia-prime to unload the nvidia modules, and to allow the PCI device to sleep. 3) Making a slight change to the current patch in Gdm, used to call the PRIME scripts before and after a Gdm session (so that gpu-manager gets actually called on log out) 4) Adding code in gpu-manager to kill the main X/Xwayland session on log out, if the session is preventing us from unloading the nvidia driver. A new X/Xwayland session will be created after unload the module. 5) Removing the systemd service that loads nouveau from the nvidia packages. [Test Case] 1) Enable the -proposed repository, and install the new "ubuntu-drivers-common", nvidia drivers, nvidia-prime, and gdm3 * 2) Make sure the nvidia packages are installed, and enable performance mode (if it is already enabled, call "sudo prime-select intel" first): sudo prime-select nvidia 3) Restart your computer and attach your /var/log/gpu-manager.log. see if the system boots correctly. If unsure, please attach your /var/log /gpu-manager.log and /var/log/Xorg.0.log 4) Select power saving mode: sudo prime-select intel 5) Log out and log back in 6) Check if the nvidia driver is still loaded: lsmod | grep nvidia [Regression Potential] Low, as hybrid graphics support does not work correctly, and the changes only affect this use case. _ * Steps to test the updates: 1) Enable the bionic-proposed repositories 2) Create /etc/apt/preferences.d/proposed-updates with the following content: Package: * Pin: release a=bionic-proposed Pin-Priority: 400 3) Update the list of packages: sudo apt-get update 4) Install the packages from -proposed using the following command: sudo apt install nvidia-driver-390/bionic-proposed gdm3/bionic- proposed ubuntu-drivers-common/bionic-proposed nvidia-prime/bionic- proposed nvidia-settings/bionic-proposed libnvidia-gl-390/bionic- proposed libnvidia-compute-390/bionic-proposed libnvidia-decode-390 /bionic-proposed libnvidia-encode-390/bionic-proposed libnvidia- ifr1-390/bionic-proposed libnvidia-fbc1-390/bionic-proposed To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1778011/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1778011] Re: SRU: PRIME Power Saving mode draws too much power
@Aurelijus: not yet. I am going to add support for lightdm and for sddm in the next update. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to nvidia-settings in Ubuntu. https://bugs.launchpad.net/bugs/1778011 Title: SRU: PRIME Power Saving mode draws too much power Status in HWE Next: New Status in gdm3 package in Ubuntu: Fix Released Status in nvidia-graphics-drivers-390 package in Ubuntu: Fix Released Status in nvidia-prime package in Ubuntu: Fix Released Status in nvidia-settings package in Ubuntu: Fix Released Status in ubuntu-drivers-common package in Ubuntu: Fix Released Status in gdm3 source package in Bionic: Fix Committed Status in nvidia-graphics-drivers-390 source package in Bionic: Fix Committed Status in nvidia-prime source package in Bionic: Fix Committed Status in nvidia-settings source package in Bionic: Fix Committed Status in ubuntu-drivers-common source package in Bionic: Fix Committed Bug description: SRU Request: [Impact] Relying on the nouveau driver and on the vga switcheroo (to get around a change in systemd LP: #1777099) caused increased power consumption, and slowed down the switching process. Furthermore, if the main X/Xwayland session was started by Gdm when the nvidia driver was loaded, the session will keep the nvidia module loaded, and prevent the system from switching off the dGPU. Also, the nouveau driver will be loaded, if nvidia is not, and this can cause problems to unsupported NVIDIA GPUs. The solution involves the following changes: 1) Solving the problem in systemd (LP: #1777099) 2) Adding code in gpu-manager and in nvidia-prime to unload the nvidia modules, and to allow the PCI device to sleep. 3) Making a slight change to the current patch in Gdm, used to call the PRIME scripts before and after a Gdm session (so that gpu-manager gets actually called on log out) 4) Adding code in gpu-manager to kill the main X/Xwayland session on log out, if the session is preventing us from unloading the nvidia driver. A new X/Xwayland session will be created after unload the module. 5) Removing the systemd service that loads nouveau from the nvidia packages. [Test Case] 1) Enable the -proposed repository, and install the new "ubuntu-drivers-common", nvidia drivers, nvidia-prime, and gdm3 * 2) Make sure the nvidia packages are installed, and enable performance mode (if it is already enabled, call "sudo prime-select intel" first): sudo prime-select nvidia 3) Restart your computer and attach your /var/log/gpu-manager.log. see if the system boots correctly. If unsure, please attach your /var/log /gpu-manager.log and /var/log/Xorg.0.log 4) Select power saving mode: sudo prime-select intel 5) Log out and log back in 6) Check if the nvidia driver is still loaded: lsmod | grep nvidia [Regression Potential] Low, as hybrid graphics support does not work correctly, and the changes only affect this use case. _ * Steps to test the updates: 1) Enable the bionic-proposed repositories 2) Create /etc/apt/preferences.d/proposed-updates with the following content: Package: * Pin: release a=bionic-proposed Pin-Priority: 400 3) Update the list of packages: sudo apt-get update 4) Install the packages from -proposed using the following command: sudo apt install nvidia-driver-390/bionic-proposed gdm3/bionic- proposed ubuntu-drivers-common/bionic-proposed nvidia-prime/bionic- proposed nvidia-settings/bionic-proposed libnvidia-gl-390/bionic- proposed libnvidia-compute-390/bionic-proposed libnvidia-decode-390 /bionic-proposed libnvidia-encode-390/bionic-proposed libnvidia- ifr1-390/bionic-proposed libnvidia-fbc1-390/bionic-proposed To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1778011/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1794067] Re: Bug in selinux on ubuntu 16.04 with kernel 4.15.0-34
FYI: -- Forwarded message - From: Stephen Smalley Date: Fr., 21. Sep. 2018 um 19:09 Uhr Subject: Re: Bug in selinux on ubuntu 16.04 with kernel 4.15.0-34 To: Benjamin Schüle , , Paul Moore On 09/21/2018 04:50 AM, Benjamin Schüle wrote: > Hello, > > just found a bug in selinux. It appears on ubuntu 16.04 with kernel > 4.15, but not with kernel 4.4. > > What's going wrong: > Copy a link with "-a" option while selinux is on. > > > steps to reproduce: >~$ mkdir -p a/b >~$ ln -s b a/c >~$ cp -a a b >cp: failed to restore the default file creation context: Invalid argument > > > Results of my investigation: > > The "cp" of coreutils is calling "setfscreatecon (NULL)" to restore > the default file creation context (coreutils-8.30/src/copy.c:1771) as > it is stated in the selinux api > (/libselinux/include/selinux/selinux.h:71). > > As we see in the result of strace below, the kernel returns an -1 on > try to restore the default file creation context. So, in my opinion, > is the bug has to be in the selinux_setprocattr method in the > security/selinux/hooks.c file. > > > Part of "strace cp -a a b" > > lgetxattr("a/c", "security.selinux", > "system_u:object_r:user_home_dir_t:s0", 255) = 37 > readlink("a/c", "b", 2) = 1 > symlink("b", "b/a/c") = 0 > open("/proc/self/task/2136/attr/fscreate", O_RDWR|O_CLOEXEC) = 3 > write(3, NULL, 0) = -1 EINVAL (Invalid argument) > close(3)= 0 > open("/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3 > fstat(3, {st_mode=S_IFREG|0644, st_size=2995, ...}) = 0 > read(3, "# Locale name alias data base.\n#"..., 4096) = 2995 > read(3, "", 4096) = 0 > close(3) This appears to be Ubuntu-specific; I can't reproduce upstream. If you are able to reproduce with an upstream kernel, let us know; otherwise, file a bug with Ubuntu. A quick look at the Ubuntu kernel git tree shows the following commit which would explain this regression. commit 36788bfe15f16b2eba39d0e563ae8027c5072b98 Author: Colin Ian King Date: Tue Oct 3 13:12:54 2017 +0100 UBUNTU: SAUCE: LSM stacking: check for invalid zero sized writes BugLink: http://bugs.launchpad.net/bugs/1720779 BugLink: http://bugs.launchpad.net/bugs/1763062 Writing zero bytes to /proc/$pid/task/$pid/attr/context via security_setprocattr cause an oops in memcpy_erms. Fix this by checking for zero size and returning -EINVAL for this invalid write size. Detected by running stress-ng --procfs 0 Signed-off-by: Colin Ian King Signed-off-by: Seth Forshee -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1794067 Title: Bug in selinux on ubuntu 16.04 with kernel 4.15.0-34 Status in linux package in Ubuntu: Confirmed Bug description: Hello, just found a bug in selinux. Whats going wrong: Copy a link with "-a" option while selinux is on. steps to reproduce: ~$ mkdir -p a/b ~$ ln -s b a/c ~$ cp -a a b cp: failed to restore the default file creation context: Invalid argument Results of my investigation: The "cp" of coreutils is calling "setfscreatecon (NULL)" to restore the default file creation context (coreutils-8.30/src/copy.c:1771) as it is stated in the selinux api (/libselinux/include/selinux/selinux.h:71). As we see in the result of strace below, the kernel returns an -1 on try to restore the default file creation context. So in my opinion is the bug has to be in the selinux_setprocattr method in the security/selinux/hooks.c file. Part of "strace cp -a a b" lgetxattr("a/c", "security.selinux", "system_u:object_r:user_home_dir_t:s0", 255) = 37 readlink("a/c", "b", 2) = 1 symlink("b", "b/a/c") = 0 open("/proc/self/task/2136/attr/fscreate", O_RDWR|O_CLOEXEC) = 3 write(3, NULL, 0) = -1 EINVAL (Invalid argument) close(3) = 0 open("/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=2995, ...}) = 0 read(3, "# Locale name alias data base.\n#"..., 4096) = 2995 read(3, "", 4096) = 0 close(3) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1794067/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793726] Re: bluetooth device "disappears", rtl 8822, combo wifi + bt
** Changed in: bluez (Ubuntu) Status: Incomplete => New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1793726 Title: bluetooth device "disappears", rtl 8822, combo wifi + bt Status in bluez package in Ubuntu: New Bug description: The BT part of mobo mounted combo device rtl 8822 with wifi and BT disappears sometimes. Wifi seems to work without problems. BT can just seem to disappear. I have not found a way to reinitialize it. Rebooting "sometimes" works. BT can work fine for a while, then suddenly disappear. Booting into Fedora 28, BT has always been present. Upon booting back into Mint 19, BT is present here too. In the cases when BT has disappeared, bluetooth manager applet says "no adapters". bluetoothctl: power on does not work. linux-firmware/bionic-updates,bionic-updates,now 1.173.1 linux-image-4.15.0-34-generic/bionic-updates,bionic-security,now 4.15.0-34.37 amd64 when working: $ lsmod | grep 8822 r8822be 851968 0 mac80211 778240 1 r8822be cfg80211 622592 2 mac80211,r8822be $ lsmod | grep btusb btusb 45056 0 btrtl 16384 1 btusb btbcm 16384 1 btusb btintel16384 1 btusb bluetooth 548864 43 btrtl,btintel,bnep,btbcm,rfcomm,btusb --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.3 Architecture: amd64 CurrentDesktop: X-Cinnamon DistroRelease: Linux Mint 19 InstallationDate: Installed on 2018-09-05 (15 days ago) InstallationMedia: Linux Mint 19 "Tara" - Release amd64 20180717 InterestingModules: rfcomm bnep btusb bluetooth MachineType: HP OMEN X by HP Desktop PC 900-2XX NonfreeKernelModules: nvidia_modeset nvidia Package: bluez 5.48-0ubuntu3.1 [origin: Ubuntu] PackageArchitecture: amd64 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-34-generic root=UUID=928f0c4b-9a59-45d0-a6d9-f0c36f073288 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-34.37-generic 4.15.18 Tags: tara third-party-packages Uname: Linux 4.15.0-34-generic x86_64 UnreportableReason: This is not an official Linux package. Please remove any third party package and try again. UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 05/16/2018 dmi.bios.vendor: AMI dmi.bios.version: F.21 dmi.board.name: 839F dmi.board.vendor: HP dmi.board.version: 1.0 dmi.chassis.type: 3 dmi.chassis.vendor: HP dmi.modalias: dmi:bvnAMI:bvrF.21:bd05/16/2018:svnHP:pnOMENXbyHPDesktopPC900-2XX:pvr:rvnHP:rn839F:rvr1.0:cvnHP:ct3:cvr: dmi.product.family: 103C_53311M OMEN X dmi.product.name: OMEN X by HP Desktop PC 900-2XX dmi.sys.vendor: HP hciconfig: hci0:Type: Primary Bus: USB BD Address: 90:32:4B:90:93:6A ACL MTU: 1021:8 SCO MTU: 255:16 UP RUNNING PSCAN ISCAN RX bytes:2521415 acl:87 sco:0 events:188278 errors:0 TX bytes:145780806 acl:163568 sco:0 commands:2186 errors:0 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1793726/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1794067] Missing required logs.
This bug is missing log files that will aid in diagnosing the problem. While running an Ubuntu kernel (not a mainline or third-party kernel) please enter the following command in a terminal window: apport-collect 1794067 and then change the status of the bug to 'Confirmed'. If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'. This change has been made by an automated script, maintained by the Ubuntu Kernel Team. ** Changed in: linux (Ubuntu) Status: New => Incomplete ** Tags added: xenial -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1794067 Title: Bug in selinux on ubuntu 16.04 with kernel 4.15.0-34 Status in linux package in Ubuntu: Confirmed Bug description: Hello, just found a bug in selinux. Whats going wrong: Copy a link with "-a" option while selinux is on. steps to reproduce: ~$ mkdir -p a/b ~$ ln -s b a/c ~$ cp -a a b cp: failed to restore the default file creation context: Invalid argument Results of my investigation: The "cp" of coreutils is calling "setfscreatecon (NULL)" to restore the default file creation context (coreutils-8.30/src/copy.c:1771) as it is stated in the selinux api (/libselinux/include/selinux/selinux.h:71). As we see in the result of strace below, the kernel returns an -1 on try to restore the default file creation context. So in my opinion is the bug has to be in the selinux_setprocattr method in the security/selinux/hooks.c file. Part of "strace cp -a a b" lgetxattr("a/c", "security.selinux", "system_u:object_r:user_home_dir_t:s0", 255) = 37 readlink("a/c", "b", 2) = 1 symlink("b", "b/a/c") = 0 open("/proc/self/task/2136/attr/fscreate", O_RDWR|O_CLOEXEC) = 3 write(3, NULL, 0) = -1 EINVAL (Invalid argument) close(3) = 0 open("/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=2995, ...}) = 0 read(3, "# Locale name alias data base.\n#"..., 4096) = 2995 read(3, "", 4096) = 0 close(3) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1794067/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1788748] Re: linux-oem: 4.15.0-1018.21 -proposed tracker
This bug was fixed in the package linux-oem - 4.15.0-1018.21 --- linux-oem (4.15.0-1018.21) bionic; urgency=medium * linux-oem: 4.15.0-1018.21 -proposed tracker (LP: #1788748) [ Ubuntu: 4.15.0-34.37 ] * linux: 4.15.0-34.37 -proposed tracker (LP: #1788744) * Bionic update: upstream stable patchset 2018-08-09 (LP: #1786352) - MIPS: c-r4k: Fix data corruption related to cache coherence - MIPS: ptrace: Expose FIR register through FP regset - MIPS: Fix ptrace(2) PTRACE_PEEKUSR and PTRACE_POKEUSR accesses to o32 FGRs - KVM: Fix spelling mistake: "cop_unsuable" -> "cop_unusable" - affs_lookup(): close a race with affs_remove_link() - fs: don't scan the inode cache before SB_BORN is set - aio: fix io_destroy(2) vs. lookup_ioctx() race - ALSA: timer: Fix pause event notification - do d_instantiate/unlock_new_inode combinations safely - mmc: sdhci-iproc: remove hard coded mmc cap 1.8v - mmc: sdhci-iproc: fix 32bit writes for TRANSFER_MODE register - mmc: sdhci-iproc: add SDHCI_QUIRK2_HOST_OFF_CARD_ON for cygnus - libata: Blacklist some Sandisk SSDs for NCQ - libata: blacklist Micron 500IT SSD with MU01 firmware - xen-swiotlb: fix the check condition for xen_swiotlb_free_coherent - drm/vmwgfx: Fix 32-bit VMW_PORT_HB_[IN|OUT] macros - arm64: lse: Add early clobbers to some input/output asm operands - powerpc/64s: Clear PCR on boot - IB/hfi1: Use after free race condition in send context error path - IB/umem: Use the correct mm during ib_umem_release - idr: fix invalid ptr dereference on item delete - Revert "ipc/shm: Fix shmat mmap nil-page protection" - ipc/shm: fix shmat() nil address after round-down when remapping - mm/kasan: don't vfree() nonexistent vm_area - kasan: free allocated shadow memory on MEM_CANCEL_ONLINE - kasan: fix memory hotplug during boot - kernel/sys.c: fix potential Spectre v1 issue - KVM: s390: vsie: fix < 8k check for the itdba - KVM: x86: Update cpuid properly when CR4.OSXAVE or CR4.PKE is changed - kvm: x86: IA32_ARCH_CAPABILITIES is always supported - powerpc/64s: Improve RFI L1-D cache flush fallback - powerpc/pseries: Restore default security feature flags on setup - powerpc/64s: Fix section mismatch warnings from setup_rfi_flush() - MIPS: generic: Fix machine compatible matching - mac80211: mesh: fix wrong mesh TTL offset calculation - ARC: Fix malformed ARC_EMUL_UNALIGNED default - ptr_ring: prevent integer overflow when calculating size - arm64: dts: rockchip: fix rock64 gmac2io stability issues - arm64: dts: rockchip: correct ep-gpios for rk3399-sapphire - libata: Fix compile warning with ATA_DEBUG enabled - selftests: sync: missing CFLAGS while compiling - selftest/vDSO: fix O= - selftests: pstore: Adding config fragment CONFIG_PSTORE_RAM=m - selftests: memfd: add config fragment for fuse - ARM: OMAP2+: timer: fix a kmemleak caused in omap_get_timer_dt - ARM: OMAP3: Fix prm wake interrupt for resume - ARM: OMAP2+: Fix sar_base inititalization for HS omaps - ARM: OMAP1: clock: Fix debugfs_create_*() usage - tls: retrun the correct IV in getsockopt - xhci: workaround for AMD Promontory disabled ports wakeup - IB/uverbs: Fix method merging in uverbs_ioctl_merge - IB/uverbs: Fix possible oops with duplicate ioctl attributes - IB/uverbs: Fix unbalanced unlock on error path for rdma_explicit_destroy - arm64: dts: rockchip: Fix DWMMC clocks - ARM: dts: rockchip: Fix DWMMC clocks - iwlwifi: mvm: fix security bug in PN checking - iwlwifi: mvm: fix IBSS for devices that support station type API - iwlwifi: mvm: always init rs with 20mhz bandwidth rates - NFC: llcp: Limit size of SDP URI - rxrpc: Work around usercopy check - MD: Free bioset when md_run fails - md: fix md_write_start() deadlock w/o metadata devices - s390/dasd: fix handling of internal requests - xfrm: do not call rcu_read_unlock when afinfo is NULL in xfrm_get_tos - mac80211: round IEEE80211_TX_STATUS_HEADROOM up to multiple of 4 - mac80211: fix a possible leak of station stats - mac80211: fix calling sleeping function in atomic context - cfg80211: clear wep keys after disconnection - mac80211: Do not disconnect on invalid operating class - mac80211: Fix sending ADDBA response for an ongoing session - gpu: ipu-v3: pre: fix device node leak in ipu_pre_lookup_by_phandle - gpu: ipu-v3: prg: fix device node leak in ipu_prg_lookup_by_phandle - md raid10: fix NULL deference in handle_write_completed() - drm/exynos: g2d: use monotonic timestamps - drm/exynos: fix comparison to bitshift when dealing with a mask - drm/meson: fix vsync buffer update - arm64: perf: correct PMUVer probing - RDMA/bnxt_re: Unpin SQ and RQ memory if QP create fails - RDMA/bnxt_re: Fix system crash during load/unload - net
[Kernel-packages] [Bug 1794067] Re: Bug in selinux on ubuntu 16.04 with kernel 4.15.0-34
Hello, just found a bug in selinux. Whats going wrong: Copy a link with "-a" option while selinux is on. steps to reproduce: ~$ mkdir -p a/b ~$ ln -s b a/c ~$ cp -a a b cp: failed to restore the default file creation context: Invalid argument Results of my investigation: The "cp" of coreutils is calling "setfscreatecon (NULL)" to restore the default file creation context (coreutils-8.30/src/copy.c:1771) as it is stated in the selinux api (/libselinux/include/selinux/selinux.h:71). As we see in the result of strace below, the kernel returns an -1 on try to restore the default file creation context. So in my opinion is the bug has to be in the selinux_setprocattr method in the security/selinux/hooks.c file. Part of "strace cp -a a b" lgetxattr("a/c", "security.selinux", "system_u:object_r:user_home_dir_t:s0", 255) = 37 readlink("a/c", "b", 2) = 1 symlink("b", "b/a/c") = 0 open("/proc/self/task/2136/attr/fscreate", O_RDWR|O_CLOEXEC) = 3 write(3, NULL, 0) = -1 EINVAL (Invalid argument) close(3)= 0 open("/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=2995, ...}) = 0 read(3, "# Locale name alias data base.\n#"..., 4096) = 2995 read(3, "", 4096) = 0 close(3) ** Description changed: - come later + Hello, just found a bug in selinux. + + Whats going wrong: + + Copy a link with "-a" option while selinux is on. + + steps to reproduce: + + ~$ mkdir -p a/b + ~$ ln -s b a/c + ~$ cp -a a b + cp: failed to restore the default file creation context: Invalid argument + + Results of my investigation: + + The "cp" of coreutils is calling "setfscreatecon (NULL)" to restore the + default file creation context (coreutils-8.30/src/copy.c:1771) as it is + stated in the selinux api (/libselinux/include/selinux/selinux.h:71). + + As we see in the result of strace below, the kernel returns an -1 on try + to restore the default file creation context. So in my opinion is the + bug has to be in the selinux_setprocattr method in the + security/selinux/hooks.c file. + + Part of "strace cp -a a b" + + lgetxattr("a/c", "security.selinux", "system_u:object_r:user_home_dir_t:s0", 255) = 37 + readlink("a/c", "b", 2) = 1 + symlink("b", "b/a/c") = 0 + open("/proc/self/task/2136/attr/fscreate", O_RDWR|O_CLOEXEC) = 3 + write(3, NULL, 0) = -1 EINVAL (Invalid argument) + close(3) = 0 + open("/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3 + fstat(3, {st_mode=S_IFREG|0644, st_size=2995, ...}) = 0 + read(3, "# Locale name alias data base.\n#"..., 4096) = 2995 + read(3, "", 4096) = 0 + close(3) ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1794067 Title: Bug in selinux on ubuntu 16.04 with kernel 4.15.0-34 Status in linux package in Ubuntu: Confirmed Bug description: Hello, just found a bug in selinux. Whats going wrong: Copy a link with "-a" option while selinux is on. steps to reproduce: ~$ mkdir -p a/b ~$ ln -s b a/c ~$ cp -a a b cp: failed to restore the default file creation context: Invalid argument Results of my investigation: The "cp" of coreutils is calling "setfscreatecon (NULL)" to restore the default file creation context (coreutils-8.30/src/copy.c:1771) as it is stated in the selinux api (/libselinux/include/selinux/selinux.h:71). As we see in the result of strace below, the kernel returns an -1 on try to restore the default file creation context. So in my opinion is the bug has to be in the selinux_setprocattr method in the security/selinux/hooks.c file. Part of "strace cp -a a b" lgetxattr("a/c", "security.selinux", "system_u:object_r:user_home_dir_t:s0", 255) = 37 readlink("a/c", "b", 2) = 1 symlink("b", "b/a/c") = 0 open("/proc/self/task/2136/attr/fscreate", O_RDWR|O_CLOEXEC) = 3 write(3, NULL, 0) = -1 EINVAL (Invalid argument) close(3) = 0 open("/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=2995, ...}) = 0 read(3, "# Locale name alias data base.\n#"..., 4096) = 2995 read(3, "", 4096) = 0 close(3) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1794067/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1794067] Re: Bug in selinux on ubuntu 16.04 with kernel 4.15.0-34
It does not occur on a mainline kernel -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1794067 Title: Bug in selinux on ubuntu 16.04 with kernel 4.15.0-34 Status in linux package in Ubuntu: Confirmed Bug description: Hello, just found a bug in selinux. Whats going wrong: Copy a link with "-a" option while selinux is on. steps to reproduce: ~$ mkdir -p a/b ~$ ln -s b a/c ~$ cp -a a b cp: failed to restore the default file creation context: Invalid argument Results of my investigation: The "cp" of coreutils is calling "setfscreatecon (NULL)" to restore the default file creation context (coreutils-8.30/src/copy.c:1771) as it is stated in the selinux api (/libselinux/include/selinux/selinux.h:71). As we see in the result of strace below, the kernel returns an -1 on try to restore the default file creation context. So in my opinion is the bug has to be in the selinux_setprocattr method in the security/selinux/hooks.c file. Part of "strace cp -a a b" lgetxattr("a/c", "security.selinux", "system_u:object_r:user_home_dir_t:s0", 255) = 37 readlink("a/c", "b", 2) = 1 symlink("b", "b/a/c") = 0 open("/proc/self/task/2136/attr/fscreate", O_RDWR|O_CLOEXEC) = 3 write(3, NULL, 0) = -1 EINVAL (Invalid argument) close(3) = 0 open("/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=2995, ...}) = 0 read(3, "# Locale name alias data base.\n#"..., 4096) = 2995 read(3, "", 4096) = 0 close(3) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1794067/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1794067] [NEW] Bug in selinux on ubuntu 16.04 with kernel 4.15.0-34
Public bug reported: Hello, just found a bug in selinux. Whats going wrong: Copy a link with "-a" option while selinux is on. steps to reproduce: ~$ mkdir -p a/b ~$ ln -s b a/c ~$ cp -a a b cp: failed to restore the default file creation context: Invalid argument Results of my investigation: The "cp" of coreutils is calling "setfscreatecon (NULL)" to restore the default file creation context (coreutils-8.30/src/copy.c:1771) as it is stated in the selinux api (/libselinux/include/selinux/selinux.h:71). As we see in the result of strace below, the kernel returns an -1 on try to restore the default file creation context. So in my opinion is the bug has to be in the selinux_setprocattr method in the security/selinux/hooks.c file. Part of "strace cp -a a b" lgetxattr("a/c", "security.selinux", "system_u:object_r:user_home_dir_t:s0", 255) = 37 readlink("a/c", "b", 2) = 1 symlink("b", "b/a/c") = 0 open("/proc/self/task/2136/attr/fscreate", O_RDWR|O_CLOEXEC) = 3 write(3, NULL, 0) = -1 EINVAL (Invalid argument) close(3) = 0 open("/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=2995, ...}) = 0 read(3, "# Locale name alias data base.\n#"..., 4096) = 2995 read(3, "", 4096) = 0 close(3) ** Affects: linux (Ubuntu) Importance: Undecided Status: Confirmed ** Tags: xenial -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1794067 Title: Bug in selinux on ubuntu 16.04 with kernel 4.15.0-34 Status in linux package in Ubuntu: Confirmed Bug description: Hello, just found a bug in selinux. Whats going wrong: Copy a link with "-a" option while selinux is on. steps to reproduce: ~$ mkdir -p a/b ~$ ln -s b a/c ~$ cp -a a b cp: failed to restore the default file creation context: Invalid argument Results of my investigation: The "cp" of coreutils is calling "setfscreatecon (NULL)" to restore the default file creation context (coreutils-8.30/src/copy.c:1771) as it is stated in the selinux api (/libselinux/include/selinux/selinux.h:71). As we see in the result of strace below, the kernel returns an -1 on try to restore the default file creation context. So in my opinion is the bug has to be in the selinux_setprocattr method in the security/selinux/hooks.c file. Part of "strace cp -a a b" lgetxattr("a/c", "security.selinux", "system_u:object_r:user_home_dir_t:s0", 255) = 37 readlink("a/c", "b", 2) = 1 symlink("b", "b/a/c") = 0 open("/proc/self/task/2136/attr/fscreate", O_RDWR|O_CLOEXEC) = 3 write(3, NULL, 0) = -1 EINVAL (Invalid argument) close(3) = 0 open("/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=2995, ...}) = 0 read(3, "# Locale name alias data base.\n#"..., 4096) = 2995 read(3, "", 4096) = 0 close(3) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1794067/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793721] Re: linux: -proposed tracker
** Changed in: kernel-sru-workflow Status: In Progress => Invalid ** Changed in: kernel-sru-workflow/automated-testing Status: New => Invalid ** Changed in: kernel-sru-workflow/certification-testing Status: New => Invalid ** Changed in: kernel-sru-workflow/prepare-package Status: Confirmed => Invalid ** Changed in: kernel-sru-workflow/prepare-package-meta Status: New => Invalid ** Changed in: kernel-sru-workflow/prepare-package-signed Status: New => Invalid ** Changed in: kernel-sru-workflow/promote-to-proposed Status: New => Invalid ** Changed in: kernel-sru-workflow/promote-to-security Status: New => Invalid ** Changed in: kernel-sru-workflow/promote-to-updates Status: New => Invalid ** Changed in: kernel-sru-workflow/regression-testing Status: New => Invalid ** Changed in: kernel-sru-workflow/security-signoff Status: New => Invalid ** Changed in: kernel-sru-workflow/verification-testing Status: New => Invalid ** Changed in: linux (Ubuntu Trusty) Status: Confirmed => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1793721 Title: linux: -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow prepare-package-signed series: Invalid Status in Kernel SRU Workflow promote-to-proposed series: Invalid Status in Kernel SRU Workflow promote-to-security series: Invalid Status in Kernel SRU Workflow promote-to-updates series: Invalid Status in Kernel SRU Workflow regression-testing series: Invalid Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: Invalid Status in linux package in Ubuntu: Invalid Status in linux source package in Trusty: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1793721/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793702] Re: linux-lts-trusty: -proposed tracker
** Changed in: kernel-sru-workflow Status: New => Invalid ** Changed in: kernel-sru-workflow/automated-testing Status: New => Invalid ** Changed in: kernel-sru-workflow/certification-testing Status: New => Invalid ** Changed in: linux-lts-trusty (Ubuntu Precise) Status: Confirmed => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-lts-trusty in Ubuntu. https://bugs.launchpad.net/bugs/1793702 Title: linux-lts-trusty: -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in linux-lts-trusty package in Ubuntu: Invalid Status in linux-lts-trusty source package in Precise: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow -- swm properties -- kernel-stable-master-bug: 1793701 To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1793702/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793505] Re: linux: -proposed tracker
** Changed in: kernel-sru-workflow Status: In Progress => Invalid ** Changed in: kernel-sru-workflow/prepare-package Status: Confirmed => Invalid ** Changed in: kernel-sru-workflow/prepare-package-lbm Status: New => Invalid ** Changed in: kernel-sru-workflow/prepare-package-meta Status: New => Invalid ** Changed in: kernel-sru-workflow/promote-to-proposed Status: New => Invalid ** Changed in: kernel-sru-workflow/promote-to-security Status: New => Invalid ** Changed in: kernel-sru-workflow/promote-to-updates Status: New => Invalid ** Changed in: kernel-sru-workflow/regression-testing Status: New => Invalid ** Changed in: kernel-sru-workflow/security-signoff Status: New => Invalid ** Changed in: kernel-sru-workflow/verification-testing Status: New => Invalid ** Changed in: linux (Ubuntu Precise) Status: Confirmed => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1793505 Title: linux: -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-lbm series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow promote-to-proposed series: Invalid Status in Kernel SRU Workflow promote-to-security series: Invalid Status in Kernel SRU Workflow promote-to-updates series: Invalid Status in Kernel SRU Workflow regression-testing series: Invalid Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: Invalid Status in linux package in Ubuntu: Invalid Status in linux source package in Precise: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-phase:Packaging kernel-stable-phase-changed:Thursday, 20. September 2018 12:01 UTC -- swm properties -- phase: Packaging To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1793505/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793732] Re: linux: -proposed tracker
** Changed in: kernel-sru-workflow Status: In Progress => Invalid ** Changed in: kernel-sru-workflow/prepare-package Status: Confirmed => Invalid ** Changed in: kernel-sru-workflow/prepare-package-lbm Status: New => Invalid ** Changed in: kernel-sru-workflow/prepare-package-meta Status: New => Invalid ** Changed in: kernel-sru-workflow/promote-to-proposed Status: New => Invalid ** Changed in: kernel-sru-workflow/promote-to-security Status: New => Invalid ** Changed in: kernel-sru-workflow/promote-to-updates Status: New => Invalid ** Changed in: kernel-sru-workflow/regression-testing Status: New => Invalid ** Changed in: kernel-sru-workflow/security-signoff Status: New => Invalid ** Changed in: kernel-sru-workflow/verification-testing Status: New => Invalid ** Changed in: linux (Ubuntu Precise) Status: Confirmed => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1793732 Title: linux: -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-lbm series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow promote-to-proposed series: Invalid Status in Kernel SRU Workflow promote-to-security series: Invalid Status in Kernel SRU Workflow promote-to-updates series: Invalid Status in Kernel SRU Workflow regression-testing series: Invalid Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: Invalid Status in linux package in Ubuntu: Invalid Status in linux source package in Precise: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1793732/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793749] Re: linux: -proposed tracker
** Changed in: kernel-sru-workflow Status: In Progress => Invalid ** Changed in: kernel-sru-workflow/prepare-package Status: Confirmed => Invalid ** Changed in: kernel-sru-workflow/prepare-package-lbm Status: New => Invalid ** Changed in: kernel-sru-workflow/prepare-package-meta Status: New => Invalid ** Changed in: kernel-sru-workflow/promote-to-proposed Status: New => Invalid ** Changed in: kernel-sru-workflow/promote-to-security Status: New => Invalid ** Changed in: kernel-sru-workflow/promote-to-updates Status: New => Invalid ** Changed in: kernel-sru-workflow/regression-testing Status: New => Invalid ** Changed in: kernel-sru-workflow/security-signoff Status: New => Invalid ** Changed in: kernel-sru-workflow/verification-testing Status: New => Invalid ** Changed in: linux (Ubuntu Precise) Status: Confirmed => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1793749 Title: linux: -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-lbm series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow promote-to-proposed series: Invalid Status in Kernel SRU Workflow promote-to-security series: Invalid Status in Kernel SRU Workflow promote-to-updates series: Invalid Status in Kernel SRU Workflow regression-testing series: Invalid Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: Invalid Status in linux package in Ubuntu: Invalid Status in linux source package in Precise: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-phase:Packaging kernel-stable-phase-changed:Friday, 21. September 2018 12:35 UTC -- swm properties -- phase: Packaging To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1793749/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793746] Re: linux: -proposed tracker
** Changed in: kernel-sru-workflow Status: In Progress => Invalid ** Changed in: kernel-sru-workflow/prepare-package Status: Confirmed => Invalid ** Changed in: kernel-sru-workflow/prepare-package-lbm Status: New => Invalid ** Changed in: kernel-sru-workflow/prepare-package-meta Status: New => Invalid ** Changed in: kernel-sru-workflow/promote-to-proposed Status: New => Invalid ** Changed in: kernel-sru-workflow/promote-to-security Status: New => Invalid ** Changed in: kernel-sru-workflow/promote-to-updates Status: New => Invalid ** Changed in: kernel-sru-workflow/regression-testing Status: New => Invalid ** Changed in: kernel-sru-workflow/security-signoff Status: New => Invalid ** Changed in: kernel-sru-workflow/verification-testing Status: New => Invalid ** Changed in: linux (Ubuntu Precise) Status: Confirmed => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1793746 Title: linux: -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-lbm series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow promote-to-proposed series: Invalid Status in Kernel SRU Workflow promote-to-security series: Invalid Status in Kernel SRU Workflow promote-to-updates series: Invalid Status in Kernel SRU Workflow regression-testing series: Invalid Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: Invalid Status in linux package in Ubuntu: Invalid Status in linux source package in Precise: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-phase:Packaging kernel-stable-phase-changed:Friday, 21. September 2018 12:31 UTC -- swm properties -- phase: Packaging To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1793746/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793720] Re: linux-lts-trusty: -proposed tracker
** Changed in: kernel-sru-workflow Status: New => Invalid ** Changed in: kernel-sru-workflow/automated-testing Status: New => Invalid ** Changed in: kernel-sru-workflow/certification-testing Status: New => Invalid ** Changed in: kernel-sru-workflow/prepare-package Status: New => Invalid ** Changed in: kernel-sru-workflow/prepare-package-meta Status: New => Invalid ** Changed in: kernel-sru-workflow/prepare-package-signed Status: New => Invalid ** Changed in: linux-lts-trusty (Ubuntu Precise) Status: Confirmed => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-lts-trusty in Ubuntu. https://bugs.launchpad.net/bugs/1793720 Title: linux-lts-trusty: -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow prepare-package-signed series: Invalid Status in linux-lts-trusty package in Ubuntu: Invalid Status in linux-lts-trusty source package in Precise: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow -- swm properties -- kernel-stable-master-bug: 1793719 To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1793720/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793700] Re: linux-lts-trusty: -proposed tracker
** Changed in: kernel-sru-workflow Status: New => Invalid ** Changed in: kernel-sru-workflow/automated-testing Status: New => Invalid ** Changed in: kernel-sru-workflow/certification-testing Status: New => Invalid ** Changed in: kernel-sru-workflow/prepare-package Status: New => Invalid ** Changed in: kernel-sru-workflow/prepare-package-meta Status: New => Invalid ** Changed in: kernel-sru-workflow/prepare-package-signed Status: New => Invalid ** Changed in: kernel-sru-workflow/promote-to-proposed Status: New => Invalid ** Changed in: kernel-sru-workflow/promote-to-security Status: New => Invalid ** Changed in: kernel-sru-workflow/promote-to-updates Status: New => Invalid ** Changed in: kernel-sru-workflow/regression-testing Status: New => Invalid ** Changed in: kernel-sru-workflow/security-signoff Status: New => Invalid ** Changed in: kernel-sru-workflow/upload-to-ppa Status: New => Invalid ** Changed in: kernel-sru-workflow/verification-testing Status: New => Invalid ** Changed in: linux-lts-trusty (Ubuntu Precise) Status: Confirmed => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-lts-trusty in Ubuntu. https://bugs.launchpad.net/bugs/1793700 Title: linux-lts-trusty: -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow prepare-package-signed series: Invalid Status in Kernel SRU Workflow promote-to-proposed series: Invalid Status in Kernel SRU Workflow promote-to-security series: Invalid Status in Kernel SRU Workflow promote-to-updates series: Invalid Status in Kernel SRU Workflow regression-testing series: Invalid Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: Invalid Status in linux-lts-trusty package in Ubuntu: Invalid Status in linux-lts-trusty source package in Precise: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow -- swm properties -- kernel-stable-master-bug: 1793699 To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1793700/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793728] Re: linux: -proposed tracker
** Changed in: kernel-sru-workflow Status: In Progress => Invalid ** Changed in: kernel-sru-workflow/prepare-package Status: Confirmed => Invalid ** Changed in: kernel-sru-workflow/prepare-package-lbm Status: New => Invalid ** Changed in: kernel-sru-workflow/prepare-package-meta Status: New => Invalid ** Changed in: kernel-sru-workflow/promote-to-proposed Status: New => Invalid ** Changed in: kernel-sru-workflow/promote-to-security Status: New => Invalid ** Changed in: kernel-sru-workflow/promote-to-updates Status: New => Invalid ** Changed in: kernel-sru-workflow/regression-testing Status: New => Invalid ** Changed in: kernel-sru-workflow/security-signoff Status: New => Invalid ** Changed in: kernel-sru-workflow/verification-testing Status: New => Invalid ** Changed in: linux (Ubuntu Precise) Status: Confirmed => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1793728 Title: linux: -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-lbm series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow promote-to-proposed series: Invalid Status in Kernel SRU Workflow promote-to-security series: Invalid Status in Kernel SRU Workflow promote-to-updates series: Invalid Status in Kernel SRU Workflow regression-testing series: Invalid Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: Invalid Status in linux package in Ubuntu: Invalid Status in linux source package in Precise: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1793728/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793531] Re: linux: -proposed tracker
** Tags removed: kernel-release-tracking-bug-live -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1793531 Title: linux: -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-lbm series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow promote-to-proposed series: Invalid Status in Kernel SRU Workflow promote-to-security series: Invalid Status in Kernel SRU Workflow promote-to-updates series: Invalid Status in Kernel SRU Workflow regression-testing series: Invalid Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: Invalid Status in linux package in Ubuntu: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow backports: derivatives: To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1793531/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793505] Re: linux: -proposed tracker
** Also affects: linux (Ubuntu Precise) Importance: Undecided Status: New ** Changed in: linux (Ubuntu Precise) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1793505 Title: linux: -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Confirmed Status in Kernel SRU Workflow prepare-package-lbm series: New Status in Kernel SRU Workflow prepare-package-meta series: New Status in Kernel SRU Workflow promote-to-proposed series: New Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: New Status in Kernel SRU Workflow security-signoff series: New Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: New Status in linux package in Ubuntu: Invalid Status in linux source package in Precise: Confirmed Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-phase:Packaging kernel-stable-phase-changed:Thursday, 20. September 2018 12:01 UTC -- swm properties -- phase: Packaging To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1793505/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793719] Re: linux: -proposed tracker
** Tags removed: kernel-release-tracking-bug-live -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1793719 Title: linux: -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow prepare-package-signed series: Invalid Status in Kernel SRU Workflow promote-to-proposed series: Invalid Status in Kernel SRU Workflow promote-to-security series: Invalid Status in Kernel SRU Workflow promote-to-updates series: Invalid Status in Kernel SRU Workflow regression-testing series: Invalid Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: Invalid Status in linux package in Ubuntu: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1793719/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1787137] Re: linux-aws: -proposed tracker
** Tags removed: kernel-release-tracking-bug-live -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-aws in Ubuntu. https://bugs.launchpad.net/bugs/1787137 Title: linux-aws: -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow promote-to-proposed series: Invalid Status in Kernel SRU Workflow promote-to-security series: Invalid Status in Kernel SRU Workflow promote-to-updates series: Invalid Status in Kernel SRU Workflow regression-testing series: Invalid Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow snap-release-to-beta series: Invalid Status in Kernel SRU Workflow snap-release-to-candidate series: Invalid Status in Kernel SRU Workflow snap-release-to-edge series: Invalid Status in Kernel SRU Workflow snap-release-to-stable series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: Invalid Status in linux-aws package in Ubuntu: Invalid Status in linux-aws source package in Bionic: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow -- swm properties -- kernel-stable-master-bug: 1787133 To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1787137/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1788743] Re: linux: -proposed tracker
** Changed in: linux (Ubuntu) Status: New => Invalid ** Tags removed: kernel-release-tracking-bug-live -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1788743 Title: linux: -proposed tracker Status in linux package in Ubuntu: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1788743/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1792239] Re: linux-azure: 4.18.0-1001.1~18.04.1 -proposed tracker
** Tags removed: kernel-release-tracking-bug-live -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-azure in Ubuntu. https://bugs.launchpad.net/bugs/1792239 Title: linux-azure: 4.18.0-1001.1~18.04.1 -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow prepare-package-signed series: Invalid Status in Kernel SRU Workflow promote-to-proposed series: Invalid Status in Kernel SRU Workflow promote-to-security series: Invalid Status in Kernel SRU Workflow promote-to-updates series: Invalid Status in Kernel SRU Workflow regression-testing series: Invalid Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow snap-release-to-beta series: Invalid Status in Kernel SRU Workflow snap-release-to-candidate series: Invalid Status in Kernel SRU Workflow snap-release-to-edge series: Invalid Status in Kernel SRU Workflow snap-release-to-stable series: Invalid Status in Kernel SRU Workflow stakeholder-signoff series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: Invalid Status in linux-azure package in Ubuntu: Invalid Status in linux-azure source package in Bionic: Invalid Bug description: This bug is for tracking the 4.18.0-1001.1~18.04.1 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-phase:Packaging kernel-stable-phase-changed:Wednesday, 12. September 2018 21:32 UTC -- swm properties -- phase: Packaging To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1792239/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793744] Re: linux: -proposed tracker
** Changed in: kernel-sru-workflow Status: In Progress => Invalid ** Changed in: kernel-sru-workflow/prepare-package Status: Confirmed => Invalid ** Changed in: kernel-sru-workflow/prepare-package-lbm Status: New => Invalid ** Changed in: kernel-sru-workflow/prepare-package-meta Status: New => Invalid ** Changed in: kernel-sru-workflow/promote-to-proposed Status: New => Invalid ** Changed in: kernel-sru-workflow/promote-to-security Status: New => Invalid ** Changed in: kernel-sru-workflow/promote-to-updates Status: New => Invalid ** Changed in: kernel-sru-workflow/regression-testing Status: New => Invalid ** Changed in: kernel-sru-workflow/security-signoff Status: New => Invalid ** Changed in: kernel-sru-workflow/verification-testing Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1793744 Title: linux: -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-lbm series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow promote-to-proposed series: Invalid Status in Kernel SRU Workflow promote-to-security series: Invalid Status in Kernel SRU Workflow promote-to-updates series: Invalid Status in Kernel SRU Workflow regression-testing series: Invalid Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: Invalid Status in linux package in Ubuntu: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow backports: derivatives: To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1793744/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1794042] [NEW] binary package names should have 18.04 instead of 16.04
Public bug reported: When building the new hwe-edge kernels for bionic, the updated meta did not fix the rules script so package would have 18.04 instead of 16.04 in their names. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Affects: linux (Ubuntu Bionic) Importance: Undecided Status: New ** Also affects: linux (Ubuntu Bionic) Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1794042 Title: binary package names should have 18.04 instead of 16.04 Status in linux package in Ubuntu: New Status in linux source package in Bionic: New Bug description: When building the new hwe-edge kernels for bionic, the updated meta did not fix the rules script so package would have 18.04 instead of 16.04 in their names. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1794042/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1787170] Re: linux-aws: -proposed tracker
** Tags removed: kernel-release-tracking-bug-live -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-aws in Ubuntu. https://bugs.launchpad.net/bugs/1787170 Title: linux-aws: -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow promote-to-proposed series: Invalid Status in Kernel SRU Workflow promote-to-security series: Invalid Status in Kernel SRU Workflow promote-to-updates series: Invalid Status in Kernel SRU Workflow regression-testing series: Invalid Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow snap-release-to-beta series: Invalid Status in Kernel SRU Workflow snap-release-to-candidate series: Invalid Status in Kernel SRU Workflow snap-release-to-edge series: Invalid Status in Kernel SRU Workflow snap-release-to-stable series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: Invalid Status in linux-aws package in Ubuntu: Invalid Status in linux-aws source package in Xenial: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow -- swm properties -- kernel-stable-master-bug: 1787167 To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1787170/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1784298] Re: linux: -proposed tracker
** Tags removed: kernel-release-tracking-bug-live -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1784298 Title: linux: -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-lbm series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow promote-to-proposed series: Invalid Status in Kernel SRU Workflow promote-to-security series: Invalid Status in Kernel SRU Workflow promote-to-updates series: Invalid Status in Kernel SRU Workflow regression-testing series: Invalid Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: Invalid Status in linux package in Ubuntu: Invalid Status in linux source package in Precise: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow backports: derivatives: To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1784298/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1794040] Missing required logs.
This bug is missing log files that will aid in diagnosing the problem. While running an Ubuntu kernel (not a mainline or third-party kernel) please enter the following command in a terminal window: apport-collect 1794040 and then change the status of the bug to 'Confirmed'. If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'. This change has been made by an automated script, maintained by the Ubuntu Kernel Team. ** Changed in: linux (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1794040 Title: Failed mainline kernel build v4.18.9 Status in linux package in Ubuntu: Incomplete Bug description: Short info: http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.18.9/ ### http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.18.9/BUILD.LOG ### *** BUILDING: commit:v4.18.9 series:unstable abinum: ... fatal: Not a valid object name v4.18.9 build-mainline-one: v4.18.9: invalid commit ## To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1794040/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1783766] Re: linux-azure: 4.17.0-1001.1 -proposed tracker
** Tags removed: kernel-release-tracking-bug-live -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-azure in Ubuntu. https://bugs.launchpad.net/bugs/1783766 Title: linux-azure: 4.17.0-1001.1 -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow prepare-package-signed series: Invalid Status in Kernel SRU Workflow promote-to-proposed series: Invalid Status in Kernel SRU Workflow promote-to-release series: Invalid Status in Kernel SRU Workflow regression-testing series: Invalid Status in Kernel SRU Workflow stakeholder-signoff series: Invalid Status in linux-azure package in Ubuntu: Invalid Status in linux-azure source package in Cosmic: Invalid Bug description: This bug is for tracking the 4.17.0-1001.1 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow -- swm properties -- kernel-master-bug: 1783396 To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1783766/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793721] Re: linux: -proposed tracker
** Also affects: linux (Ubuntu Trusty) Importance: Undecided Status: New ** Changed in: linux (Ubuntu Trusty) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1793721 Title: linux: -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow automated-testing series: New Status in Kernel SRU Workflow certification-testing series: New Status in Kernel SRU Workflow prepare-package series: Confirmed Status in Kernel SRU Workflow prepare-package-meta series: New Status in Kernel SRU Workflow prepare-package-signed series: New Status in Kernel SRU Workflow promote-to-proposed series: New Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: New Status in Kernel SRU Workflow security-signoff series: New Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: New Status in linux package in Ubuntu: Invalid Status in linux source package in Trusty: Confirmed Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1793721/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793720] Re: linux-lts-trusty: -proposed tracker
** Also affects: kernel-sru-workflow/prepare-package-signed Importance: Undecided Status: New ** Also affects: linux-lts-trusty (Ubuntu Precise) Importance: Undecided Status: New ** Tags added: kernel-sru-derivative-of-1793719 ** Changed in: linux-lts-trusty (Ubuntu Precise) Status: New => Confirmed ** Changed in: linux-lts-trusty (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-lts-trusty in Ubuntu. https://bugs.launchpad.net/bugs/1793720 Title: linux-lts-trusty: -proposed tracker Status in Kernel SRU Workflow: New Status in Kernel SRU Workflow automated-testing series: New Status in Kernel SRU Workflow certification-testing series: New Status in Kernel SRU Workflow prepare-package series: New Status in Kernel SRU Workflow prepare-package-meta series: New Status in Kernel SRU Workflow prepare-package-signed series: New Status in linux-lts-trusty package in Ubuntu: Invalid Status in linux-lts-trusty source package in Precise: Confirmed Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow -- swm properties -- kernel-stable-master-bug: 1793719 To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1793720/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793745] Re: linux: -proposed tracker
** Changed in: kernel-sru-workflow Status: In Progress => Invalid ** Changed in: kernel-sru-workflow/prepare-package Status: Confirmed => Invalid ** Changed in: kernel-sru-workflow/prepare-package-lbm Status: New => Invalid ** Changed in: kernel-sru-workflow/prepare-package-meta Status: New => Invalid ** Changed in: kernel-sru-workflow/promote-to-proposed Status: New => Invalid ** Changed in: kernel-sru-workflow/promote-to-security Status: New => Invalid ** Changed in: kernel-sru-workflow/promote-to-updates Status: New => Invalid ** Changed in: kernel-sru-workflow/regression-testing Status: New => Invalid ** Changed in: kernel-sru-workflow/security-signoff Status: New => Invalid ** Changed in: kernel-sru-workflow/verification-testing Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1793745 Title: linux: -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-lbm series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow promote-to-proposed series: Invalid Status in Kernel SRU Workflow promote-to-security series: Invalid Status in Kernel SRU Workflow promote-to-updates series: Invalid Status in Kernel SRU Workflow regression-testing series: Invalid Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: Invalid Status in linux package in Ubuntu: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow backports: derivatives: To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1793745/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793524] Re: linux: -proposed tracker
** Tags removed: kernel-release-tracking-bug-live -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1793524 Title: linux: -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-lbm series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow promote-to-proposed series: Invalid Status in Kernel SRU Workflow promote-to-security series: Invalid Status in Kernel SRU Workflow promote-to-updates series: Invalid Status in Kernel SRU Workflow regression-testing series: Invalid Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: Invalid Status in linux package in Ubuntu: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow backports: derivatives: To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1793524/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793526] Re: linux-lts-trusty: -proposed tracker
** Tags removed: kernel-release-tracking-bug-live -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-lts-trusty in Ubuntu. https://bugs.launchpad.net/bugs/1793526 Title: linux-lts-trusty: -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow prepare-package-signed series: Invalid Status in Kernel SRU Workflow promote-to-proposed series: Invalid Status in Kernel SRU Workflow promote-to-security series: Invalid Status in Kernel SRU Workflow promote-to-updates series: Invalid Status in Kernel SRU Workflow regression-testing series: Invalid Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: Invalid Status in linux-lts-trusty package in Ubuntu: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow -- swm properties -- kernel-stable-master-bug: 1793525 To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1793526/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793660] Re: linux-lts-trusty: -proposed tracker
** Tags removed: kernel-release-tracking-bug-live -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-lts-trusty in Ubuntu. https://bugs.launchpad.net/bugs/1793660 Title: linux-lts-trusty: -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow prepare-package-signed series: Invalid Status in Kernel SRU Workflow promote-to-proposed series: Invalid Status in Kernel SRU Workflow promote-to-security series: Invalid Status in Kernel SRU Workflow promote-to-updates series: Invalid Status in Kernel SRU Workflow regression-testing series: Invalid Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: Invalid Status in linux-lts-trusty package in Ubuntu: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow -- swm properties -- kernel-stable-master-bug: 1793659 To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1793660/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793525] Re: linux: -proposed tracker
** Tags removed: kernel-release-tracking-bug-live -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1793525 Title: linux: -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow prepare-package-signed series: Invalid Status in Kernel SRU Workflow promote-to-proposed series: Invalid Status in Kernel SRU Workflow promote-to-security series: Invalid Status in Kernel SRU Workflow promote-to-updates series: Invalid Status in Kernel SRU Workflow regression-testing series: Invalid Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: Invalid Status in linux package in Ubuntu: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow backports: bug 1793526 (linux-lts-trusty) derivatives: To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1793525/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793526] Re: linux-lts-trusty: -proposed tracker
** Changed in: kernel-sru-workflow Status: In Progress => Invalid ** Changed in: kernel-sru-workflow/prepare-package Status: New => Invalid ** Changed in: kernel-sru-workflow/prepare-package-meta Status: New => Invalid ** Changed in: kernel-sru-workflow/prepare-package-signed Status: New => Invalid ** Changed in: kernel-sru-workflow/promote-to-proposed Status: New => Invalid ** Changed in: kernel-sru-workflow/promote-to-security Status: New => Invalid ** Changed in: kernel-sru-workflow/promote-to-updates Status: New => Invalid ** Changed in: kernel-sru-workflow/regression-testing Status: New => Invalid ** Changed in: kernel-sru-workflow/security-signoff Status: New => Invalid ** Changed in: kernel-sru-workflow/upload-to-ppa Status: New => Invalid ** Changed in: kernel-sru-workflow/verification-testing Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-lts-trusty in Ubuntu. https://bugs.launchpad.net/bugs/1793526 Title: linux-lts-trusty: -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow prepare-package-signed series: Invalid Status in Kernel SRU Workflow promote-to-proposed series: Invalid Status in Kernel SRU Workflow promote-to-security series: Invalid Status in Kernel SRU Workflow promote-to-updates series: Invalid Status in Kernel SRU Workflow regression-testing series: Invalid Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: Invalid Status in linux-lts-trusty package in Ubuntu: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow -- swm properties -- kernel-stable-master-bug: 1793525 To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1793526/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1794055] Re: [Witherspoon-DD2.2][Ubu 18.10] [4.18.0-7-generic ] OS booting thrown with nouveau errors; OS booted successfully
It looks like this issue is seen with the "in development" 18.10 4.18 kernel. Does the same issue occur with 18.04 (4.15 kernel)? ** Also affects: ubuntu-power-systems Importance: Undecided Status: New ** Changed in: ubuntu-power-systems Assignee: (unassigned) => Canonical Kernel Team (canonical-kernel-team) ** Changed in: ubuntu-power-systems Importance: Undecided => High -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1794055 Title: [Witherspoon-DD2.2][Ubu 18.10] [4.18.0-7-generic ] OS booting thrown with nouveau errors; OS booted successfully Status in The Ubuntu-power-systems project: New Status in linux package in Ubuntu: New Bug description: == Comment: #0 - Kalpana Shetty - 2018-09-15 23:55:13 == ---Problem Description--- [Witherspoon-DD2.2][Ubu 18.10] [4.18.0-7-generic ] OS booting thrown with nouveau errors Contact Information = kalsh...@in.ibm.com, preeti.tha...@in.ibm.com ---uname output--- root@ltc-wcwsp3:~# uname -a Linux ltc-wcwsp3 4.18.0-7-generic #8-Ubuntu SMP Tue Aug 28 18:20:56 UTC 2018 ppc64le ppc64le ppc64le GNU/Linux Machine Type = Witherspoon DD2.2 LC Steps: 1. Netinstall Ubu 18.10 on Witherspoon-LC-DD2.2 6GPU system --> PASS 2. Boot the OS ---> PASS but error thrown on the console related open source NVIDIA driver. [Disk: sdb2 / c0302064-c5a3-49a7-8bd4-402283e6fcbe] Ubuntu, with Linux 4.18.0-7-generic (recovery mode) Ubuntu, with Linux 4.18.0-7-generic Ubuntu [Disk: nvme0n1p2 / c5d042f1-812e-49e0-94b2-ade477084061] Ubuntu, with Linux 4.18.0-7-generic (recovery mode) * Ubuntu, with Linux 4.18.0-7-generic Ubuntu System information System configuration System status log Language Rescan devices Retrieve config from URL Plugins (0) Exit to shell ?? Enter=accept, e=edit, n=new, x=exit, l=language, g=log, h=help The system is going down NOW! Sent SIGTERM to all processes Sent SIGKILL to all processes [ 57.513329] kexec_core: Starting new kernel [ 149.358703978,5] OPAL: Switch to big-endian OS [ 153.355498935,5] OPAL: Switch to little-endian OS [2.943735] integrity: Unable to open file: /etc/keys/x509_ima.der (-2) [2.943738] integrity: Unable to open file: /etc/keys/x509_evm.der (-2) [3.132733] vio vio: uevent: failed to send synthetic uevent [4.058698] nouveau 0004:04:00.0: gr: failed to load gr/sw_nonctx [4.129215] nouveau 0004:04:00.0: DRM: failed to create kernel channel, -22 [ 19.126509] nouveau 0004:04:00.0: DRM: failed to idle channel 0 [DRM] [ 19.281450] nouveau 0004:05:00.0: gr: failed to load gr/sw_nonctx [ 19.351322] nouveau 0004:05:00.0: DRM: failed to create kernel channel, -22 [ 34.350509] nouveau 0004:05:00.0: DRM: failed to idle channel 0 [DRM] [ 34.502063] nouveau 0004:06:00.0: gr: failed to load gr/sw_nonctx [ 34.572144] nouveau 0004:06:00.0: DRM: failed to create kernel channel, -22 [ 49.570509] nouveau 0004:06:00.0: DRM: failed to idle channel 0 [DRM] [ 49.734754] nouveau 0035:03:00.0: gr: failed to load gr/sw_nonctx [ 49.805057] nouveau 0035:03:00.0: DRM: failed to create kernel channel, -22 [ 64.802510] nouveau 0035:03:00.0: DRM: failed to idle channel 0 [DRM] [ 64.955442] nouveau 0035:04:00.0: gr: failed to load gr/sw_nonctx [ 65.025537] nouveau 0035:04:00.0: DRM: failed to create kernel channel, -22 [ 80.022509] nouveau 0035:04:00.0: DRM: failed to idle channel 0 [DRM] [ 80.181169] nouveau 0035:05:00.0: gr: failed to load gr/sw_nonctx [ 80.251481] nouveau 0035:05:00.0: DRM: failed to create kernel channel, -22 [ 95.250509] nouveau 0035:05:00.0: DRM: failed to idle channel 0 [DRM] /dev/nvme0n1p2: recovering journal /dev/nvme0n1p2: clean, 72569/97681408 files, 7384418/390701312 blocks -.mount kmod-static-nodes.service dev-hugepages.mount dev-mqueue.mount sys-kernel-debug.mount ufw.service lvm2-lvmetad.service systemd-remount-fs.service systemd-random-seed.service systemd-sysusers.service keyboard-setup.service systemd-tmpfiles-setup-dev.service lvm2-monitor.service finalrd.service console-setup.service swapfile.swap ebtables.service systemd-udevd.service systemd-journald.service systemd-journal-flush.service systemd-tmpfiles-setup.service systemd-update-utmp.service [ 100.997765] vio vio: uevent: failed to send synthetic uevent systemd-udev-trigger.service systemd-timesyncd.service apparmor.service lvm2-pvscan@8:3.service systemd-modules-load.service sys-kernel-config.mount sys-fs-fuse-connections.mount systemd-sysctl.service ondemand.service dbus.service irqbalance.service opal-prd.service lxcfs.service
[Kernel-packages] [Bug 1788742] Re: linux: -proposed tracker
** Tags removed: kernel-release-tracking-bug-live -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1788742 Title: linux: -proposed tracker Status in linux package in Ubuntu: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1788742/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1787172] Re: linux-kvm: -proposed tracker
** Tags removed: kernel-release-tracking-bug-live -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-kvm in Ubuntu. https://bugs.launchpad.net/bugs/1787172 Title: linux-kvm: -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow promote-to-proposed series: Invalid Status in Kernel SRU Workflow promote-to-security series: Invalid Status in Kernel SRU Workflow promote-to-updates series: Invalid Status in Kernel SRU Workflow regression-testing series: Invalid Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: Invalid Status in linux-kvm package in Ubuntu: Invalid Status in linux-kvm source package in Xenial: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow -- swm properties -- kernel-stable-master-bug: 1787167 To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1787172/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1787138] Re: linux-azure: -proposed tracker
** Tags removed: kernel-release-tracking-bug-live -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-azure in Ubuntu. https://bugs.launchpad.net/bugs/1787138 Title: linux-azure: -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow prepare-package-signed series: Invalid Status in Kernel SRU Workflow promote-to-proposed series: Invalid Status in Kernel SRU Workflow promote-to-security series: Invalid Status in Kernel SRU Workflow promote-to-updates series: Invalid Status in Kernel SRU Workflow regression-testing series: Invalid Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow snap-release-to-beta series: Invalid Status in Kernel SRU Workflow snap-release-to-candidate series: Invalid Status in Kernel SRU Workflow snap-release-to-edge series: Invalid Status in Kernel SRU Workflow snap-release-to-stable series: Invalid Status in Kernel SRU Workflow stakeholder-signoff series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: Invalid Status in linux-azure package in Ubuntu: Invalid Status in linux-azure source package in Bionic: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow -- swm properties -- kernel-stable-master-bug: 1787133 To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1787138/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793524] Re: linux: -proposed tracker
** Changed in: kernel-sru-workflow Status: In Progress => Invalid ** Changed in: kernel-sru-workflow/prepare-package Status: Confirmed => Invalid ** Changed in: kernel-sru-workflow/prepare-package-lbm Status: New => Invalid ** Changed in: kernel-sru-workflow/prepare-package-meta Status: New => Invalid ** Changed in: kernel-sru-workflow/promote-to-proposed Status: New => Invalid ** Changed in: kernel-sru-workflow/promote-to-security Status: New => Invalid ** Changed in: kernel-sru-workflow/promote-to-updates Status: New => Invalid ** Changed in: kernel-sru-workflow/regression-testing Status: New => Invalid ** Changed in: kernel-sru-workflow/security-signoff Status: New => Invalid ** Changed in: kernel-sru-workflow/verification-testing Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1793524 Title: linux: -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-lbm series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow promote-to-proposed series: Invalid Status in Kernel SRU Workflow promote-to-security series: Invalid Status in Kernel SRU Workflow promote-to-updates series: Invalid Status in Kernel SRU Workflow regression-testing series: Invalid Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: Invalid Status in linux package in Ubuntu: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow backports: derivatives: To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1793524/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1794042] Missing required logs.
This bug is missing log files that will aid in diagnosing the problem. While running an Ubuntu kernel (not a mainline or third-party kernel) please enter the following command in a terminal window: apport-collect 1794042 and then change the status of the bug to 'Confirmed'. If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'. This change has been made by an automated script, maintained by the Ubuntu Kernel Team. ** Changed in: linux (Ubuntu) Status: New => Incomplete ** Tags added: bionic -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1794042 Title: binary package names should have 18.04 instead of 16.04 Status in linux package in Ubuntu: Incomplete Status in linux source package in Bionic: Fix Committed Bug description: When building the new hwe-edge kernels for bionic, the updated meta did not fix the rules script so package would have 18.04 instead of 16.04 in their names. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1794042/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1794055] sosreport
Default Comment by Bridge ** Attachment added: "sosreport" https://bugs.launchpad.net/bugs/1794055/+attachment/5192317/+files/sosreport-BZ171506.171506-20180915235600 ** Changed in: ubuntu Assignee: (unassigned) => Ubuntu on IBM Power Systems Bug Triage (ubuntu-power-triage) ** Package changed: ubuntu => linux (Ubuntu) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1794055 Title: [Witherspoon-DD2.2][Ubu 18.10] [4.18.0-7-generic ] OS booting thrown with nouveau errors; OS booted successfully Status in The Ubuntu-power-systems project: New Status in linux package in Ubuntu: New Bug description: == Comment: #0 - Kalpana Shetty - 2018-09-15 23:55:13 == ---Problem Description--- [Witherspoon-DD2.2][Ubu 18.10] [4.18.0-7-generic ] OS booting thrown with nouveau errors Contact Information = kalsh...@in.ibm.com, preeti.tha...@in.ibm.com ---uname output--- root@ltc-wcwsp3:~# uname -a Linux ltc-wcwsp3 4.18.0-7-generic #8-Ubuntu SMP Tue Aug 28 18:20:56 UTC 2018 ppc64le ppc64le ppc64le GNU/Linux Machine Type = Witherspoon DD2.2 LC Steps: 1. Netinstall Ubu 18.10 on Witherspoon-LC-DD2.2 6GPU system --> PASS 2. Boot the OS ---> PASS but error thrown on the console related open source NVIDIA driver. [Disk: sdb2 / c0302064-c5a3-49a7-8bd4-402283e6fcbe] Ubuntu, with Linux 4.18.0-7-generic (recovery mode) Ubuntu, with Linux 4.18.0-7-generic Ubuntu [Disk: nvme0n1p2 / c5d042f1-812e-49e0-94b2-ade477084061] Ubuntu, with Linux 4.18.0-7-generic (recovery mode) * Ubuntu, with Linux 4.18.0-7-generic Ubuntu System information System configuration System status log Language Rescan devices Retrieve config from URL Plugins (0) Exit to shell ?? Enter=accept, e=edit, n=new, x=exit, l=language, g=log, h=help The system is going down NOW! Sent SIGTERM to all processes Sent SIGKILL to all processes [ 57.513329] kexec_core: Starting new kernel [ 149.358703978,5] OPAL: Switch to big-endian OS [ 153.355498935,5] OPAL: Switch to little-endian OS [2.943735] integrity: Unable to open file: /etc/keys/x509_ima.der (-2) [2.943738] integrity: Unable to open file: /etc/keys/x509_evm.der (-2) [3.132733] vio vio: uevent: failed to send synthetic uevent [4.058698] nouveau 0004:04:00.0: gr: failed to load gr/sw_nonctx [4.129215] nouveau 0004:04:00.0: DRM: failed to create kernel channel, -22 [ 19.126509] nouveau 0004:04:00.0: DRM: failed to idle channel 0 [DRM] [ 19.281450] nouveau 0004:05:00.0: gr: failed to load gr/sw_nonctx [ 19.351322] nouveau 0004:05:00.0: DRM: failed to create kernel channel, -22 [ 34.350509] nouveau 0004:05:00.0: DRM: failed to idle channel 0 [DRM] [ 34.502063] nouveau 0004:06:00.0: gr: failed to load gr/sw_nonctx [ 34.572144] nouveau 0004:06:00.0: DRM: failed to create kernel channel, -22 [ 49.570509] nouveau 0004:06:00.0: DRM: failed to idle channel 0 [DRM] [ 49.734754] nouveau 0035:03:00.0: gr: failed to load gr/sw_nonctx [ 49.805057] nouveau 0035:03:00.0: DRM: failed to create kernel channel, -22 [ 64.802510] nouveau 0035:03:00.0: DRM: failed to idle channel 0 [DRM] [ 64.955442] nouveau 0035:04:00.0: gr: failed to load gr/sw_nonctx [ 65.025537] nouveau 0035:04:00.0: DRM: failed to create kernel channel, -22 [ 80.022509] nouveau 0035:04:00.0: DRM: failed to idle channel 0 [DRM] [ 80.181169] nouveau 0035:05:00.0: gr: failed to load gr/sw_nonctx [ 80.251481] nouveau 0035:05:00.0: DRM: failed to create kernel channel, -22 [ 95.250509] nouveau 0035:05:00.0: DRM: failed to idle channel 0 [DRM] /dev/nvme0n1p2: recovering journal /dev/nvme0n1p2: clean, 72569/97681408 files, 7384418/390701312 blocks -.mount kmod-static-nodes.service dev-hugepages.mount dev-mqueue.mount sys-kernel-debug.mount ufw.service lvm2-lvmetad.service systemd-remount-fs.service systemd-random-seed.service systemd-sysusers.service keyboard-setup.service systemd-tmpfiles-setup-dev.service lvm2-monitor.service finalrd.service console-setup.service swapfile.swap ebtables.service systemd-udevd.service systemd-journald.service systemd-journal-flush.service systemd-tmpfiles-setup.service systemd-update-utmp.service [ 100.997765] vio vio: uevent: failed to send synthetic uevent systemd-udev-trigger.service systemd-timesyncd.service apparmor.service lvm2-pvscan@8:3.service systemd-modules-load.service sys-kernel-config.mount sys-fs-fuse-connections.mount systemd-sysctl.service ondemand.service dbus.service irqbalance.service opal-prd.service lxcfs.service atd.service cron.service iprdump.service iprinit.servic
[Kernel-packages] [Bug 1793717] Re: linux: -proposed tracker
** Tags removed: kernel-release-tracking-bug-live -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1793717 Title: linux: -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow prepare-package-signed series: Invalid Status in Kernel SRU Workflow promote-to-proposed series: Invalid Status in Kernel SRU Workflow promote-to-security series: Invalid Status in Kernel SRU Workflow promote-to-updates series: Invalid Status in Kernel SRU Workflow regression-testing series: Invalid Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: Invalid Status in linux package in Ubuntu: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow backports: bug 1793718 (linux-lts-trusty) derivatives: To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1793717/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793718] Re: linux-lts-trusty: -proposed tracker
** Tags removed: kernel-release-tracking-bug-live -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-lts-trusty in Ubuntu. https://bugs.launchpad.net/bugs/1793718 Title: linux-lts-trusty: -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow prepare-package-signed series: Invalid Status in Kernel SRU Workflow promote-to-proposed series: Invalid Status in Kernel SRU Workflow promote-to-security series: Invalid Status in Kernel SRU Workflow promote-to-updates series: Invalid Status in Kernel SRU Workflow regression-testing series: Invalid Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: Invalid Status in linux-lts-trusty package in Ubuntu: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow -- swm properties -- kernel-stable-master-bug: 1793717 To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1793718/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
Re: [Kernel-packages] [Bug 1768208] Re: [Lenovo ThinkPad X1 Yoga 1st Gen] Can't change brightness
Tried it and no change. The brightness is not affected by the system settings or keys. To verify my version marvin@X1-18:~$ uname -r 4.19.0-041900rc4-generic and xrandr is still working, but only for a short time until the screen updates again to full bringhtness. Interstingly the nightlight works (color is adjusted ... brightness seems as well, though I am not sure) marvin@X1-18:~$ xrandr --output eDP-1 --brightness 0.5 On Tue, Sep 18, 2018 at 4:50 AM Kai-Heng Feng wrote: > Please give latest mainline kernel (v4.19-rc4) another try, thanks! > > -- > You received this bug notification because you are subscribed to the bug > report. > https://bugs.launchpad.net/bugs/1768208 > > Title: > [Lenovo ThinkPad X1 Yoga 1st Gen] Can't change brightness > > Status in linux package in Ubuntu: > Confirmed > > Bug description: > The screen brightness cannot be changed. > > In 16.04, I could change the brightness via: > xrandr --output eDP-1 --brightness 0.7 > > WORKAROUND: Execute at a terminal: > xrandr --output eDP-1 --scale 1.25x1.25 --brightness 0.8 > > WORKAROUND: https://extensions.gnome.org/extension/1222/oled-dimmer/ > > --- > ApportVersion: 2.20.9-0ubuntu7 > Architecture: amd64 > AudioDevicesInUse: >USERPID ACCESS COMMAND >/dev/snd/controlC0: marvin 1768 F pulseaudio > CurrentDesktop: ubuntu:GNOME > DistroRelease: Ubuntu 18.04 > HibernationDevice: RESUME=UUID=e81e811a-12aa-465d-ba3c-77e34b171b69 > MachineType: LENOVO 20FRS2M600 > Package: linux (not installed) > ProcFB: 0 inteldrmfb > ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz root=/dev/nvme0n1p1 > ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 > RelatedPackageVersions: >linux-restricted-modules-4.15.0-20-generic N/A >linux-backports-modules-4.15.0-20-generic N/A >linux-firmware 1.173 > Tags: bionic > Uname: Linux 4.15.0-20-generic x86_64 > UpgradeStatus: No upgrade log present (probably fresh install) > UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo > _MarkForUpload: True > dmi.bios.date: 06/23/2016 > dmi.bios.vendor: LENOVO > dmi.bios.version: N1FET41W (1.15 ) > dmi.board.asset.tag: Not Available > dmi.board.name: 20FRS2M600 > dmi.board.vendor: LENOVO > dmi.board.version: Not Defined > dmi.chassis.asset.tag: No Asset Information > dmi.chassis.type: 10 > dmi.chassis.vendor: LENOVO > dmi.chassis.version: None > dmi.modalias: > dmi:bvnLENOVO:bvrN1FET41W(1.15):bd06/23/2016:svnLENOVO:pn20FRS2M600:pvrThinkPadX1Yoga1st:rvnLENOVO:rn20FRS2M600:rvrNotDefined:cvnLENOVO:ct10:cvrNone: > dmi.product.family: ThinkPad X1 Yoga 1st > dmi.product.name: 20FRS2M600 > dmi.product.version: ThinkPad X1 Yoga 1st > dmi.sys.vendor: LENOVO > > To manage notifications about this bug go to: > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1768208/+subscriptions > -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1768208 Title: [Lenovo ThinkPad X1 Yoga 1st Gen] Can't change brightness Status in linux package in Ubuntu: Confirmed Bug description: The screen brightness cannot be changed. In 16.04, I could change the brightness via: xrandr --output eDP-1 --brightness 0.7 WORKAROUND: Execute at a terminal: xrandr --output eDP-1 --scale 1.25x1.25 --brightness 0.8 WORKAROUND: https://extensions.gnome.org/extension/1222/oled-dimmer/ --- ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: marvin 1768 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 18.04 HibernationDevice: RESUME=UUID=e81e811a-12aa-465d-ba3c-77e34b171b69 MachineType: LENOVO 20FRS2M600 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz root=/dev/nvme0n1p1 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 06/23/2016 dmi.bios.vendor: LENOVO dmi.bios.version: N1FET41W (1.15 ) dmi.board.asset.tag: Not Available dmi.board.name: 20FRS2M600 dmi.board.vendor: LENOVO dmi.board.version: Not Defined dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: None dmi.modalias: dmi:bvnLENOVO:bvrN1FET41W(1.15):bd06/23/2016:svnLENOVO:pn20FRS2M600:pvrThinkPadX1Yoga1st:rvnLENOVO:rn20FRS2M600:rvrNotDefined:cvnLENOVO:ct10:cvrNone: dmi.product.family: ThinkPad X1 Yoga 1st dmi.product.name: 20FRS2M600 dmi.p
[Kernel-packages] [Bug 1794055] [NEW] [Witherspoon-DD2.2][Ubu 18.10] [4.18.0-7-generic ] OS booting thrown with nouveau errors; OS booted successfully
You have been subscribed to a public bug: == Comment: #0 - Kalpana Shetty - 2018-09-15 23:55:13 == ---Problem Description--- [Witherspoon-DD2.2][Ubu 18.10] [4.18.0-7-generic ] OS booting thrown with nouveau errors Contact Information = kalsh...@in.ibm.com, preeti.tha...@in.ibm.com ---uname output--- root@ltc-wcwsp3:~# uname -a Linux ltc-wcwsp3 4.18.0-7-generic #8-Ubuntu SMP Tue Aug 28 18:20:56 UTC 2018 ppc64le ppc64le ppc64le GNU/Linux Machine Type = Witherspoon DD2.2 LC Steps: 1. Netinstall Ubu 18.10 on Witherspoon-LC-DD2.2 6GPU system --> PASS 2. Boot the OS ---> PASS but error thrown on the console related open source NVIDIA driver. [Disk: sdb2 / c0302064-c5a3-49a7-8bd4-402283e6fcbe] Ubuntu, with Linux 4.18.0-7-generic (recovery mode) Ubuntu, with Linux 4.18.0-7-generic Ubuntu [Disk: nvme0n1p2 / c5d042f1-812e-49e0-94b2-ade477084061] Ubuntu, with Linux 4.18.0-7-generic (recovery mode) * Ubuntu, with Linux 4.18.0-7-generic Ubuntu System information System configuration System status log Language Rescan devices Retrieve config from URL Plugins (0) Exit to shell ?? Enter=accept, e=edit, n=new, x=exit, l=language, g=log, h=help The system is going down NOW! Sent SIGTERM to all processes Sent SIGKILL to all processes [ 57.513329] kexec_core: Starting new kernel [ 149.358703978,5] OPAL: Switch to big-endian OS [ 153.355498935,5] OPAL: Switch to little-endian OS [2.943735] integrity: Unable to open file: /etc/keys/x509_ima.der (-2) [2.943738] integrity: Unable to open file: /etc/keys/x509_evm.der (-2) [3.132733] vio vio: uevent: failed to send synthetic uevent [4.058698] nouveau 0004:04:00.0: gr: failed to load gr/sw_nonctx [4.129215] nouveau 0004:04:00.0: DRM: failed to create kernel channel, -22 [ 19.126509] nouveau 0004:04:00.0: DRM: failed to idle channel 0 [DRM] [ 19.281450] nouveau 0004:05:00.0: gr: failed to load gr/sw_nonctx [ 19.351322] nouveau 0004:05:00.0: DRM: failed to create kernel channel, -22 [ 34.350509] nouveau 0004:05:00.0: DRM: failed to idle channel 0 [DRM] [ 34.502063] nouveau 0004:06:00.0: gr: failed to load gr/sw_nonctx [ 34.572144] nouveau 0004:06:00.0: DRM: failed to create kernel channel, -22 [ 49.570509] nouveau 0004:06:00.0: DRM: failed to idle channel 0 [DRM] [ 49.734754] nouveau 0035:03:00.0: gr: failed to load gr/sw_nonctx [ 49.805057] nouveau 0035:03:00.0: DRM: failed to create kernel channel, -22 [ 64.802510] nouveau 0035:03:00.0: DRM: failed to idle channel 0 [DRM] [ 64.955442] nouveau 0035:04:00.0: gr: failed to load gr/sw_nonctx [ 65.025537] nouveau 0035:04:00.0: DRM: failed to create kernel channel, -22 [ 80.022509] nouveau 0035:04:00.0: DRM: failed to idle channel 0 [DRM] [ 80.181169] nouveau 0035:05:00.0: gr: failed to load gr/sw_nonctx [ 80.251481] nouveau 0035:05:00.0: DRM: failed to create kernel channel, -22 [ 95.250509] nouveau 0035:05:00.0: DRM: failed to idle channel 0 [DRM] /dev/nvme0n1p2: recovering journal /dev/nvme0n1p2: clean, 72569/97681408 files, 7384418/390701312 blocks -.mount kmod-static-nodes.service dev-hugepages.mount dev-mqueue.mount sys-kernel-debug.mount ufw.service lvm2-lvmetad.service systemd-remount-fs.service systemd-random-seed.service systemd-sysusers.service keyboard-setup.service systemd-tmpfiles-setup-dev.service lvm2-monitor.service finalrd.service console-setup.service swapfile.swap ebtables.service systemd-udevd.service systemd-journald.service systemd-journal-flush.service systemd-tmpfiles-setup.service systemd-update-utmp.service [ 100.997765] vio vio: uevent: failed to send synthetic uevent systemd-udev-trigger.service systemd-timesyncd.service apparmor.service lvm2-pvscan@8:3.service systemd-modules-load.service sys-kernel-config.mount sys-fs-fuse-connections.mount systemd-sysctl.service ondemand.service dbus.service irqbalance.service opal-prd.service lxcfs.service atd.service cron.service iprdump.service iprinit.service systemd-logind.service iprupdate.service systemd-networkd.service rsyslog.service polkit.service accounts-daemon.service lxd-containers.service networkd-dispatcher.service var-lib-lxcfs.mount tmp-selftest\x2dmountpoint\x2d039055037.mount snapd.service snapd.seeded.service systemd-resolved.service systemd-networkd-wait-online.service blk-availability.service systemd-user-sessions.service apport.service Ubuntu Cosmic Cuttlefish (development branch) ltc-wcwsp3 hvc0 ltc-wcwsp3 login: == Comment: #2 - Kalpana Shetty - 2018-09-16 00:07:26 == sosreport -> http://9.114.13.132/repo/bugs/ubu/sosreport-BZ171506.171506-20180915235600.tar.xz == Comment: #3 - Kalpana Shetty - 2018-09-16 00:33:02 == == Comment: #4 - Praveen K. Pandey - 2018-09-19 05:52:23 == facing nouveau related error on power8 system as well [4.764818] nouveau 0002:01:00.0: fifo: fault 00 [READ] at
[Kernel-packages] [Bug 1793650] Re: linux: -proposed tracker
** Tags removed: kernel-release-tracking-bug-live -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1793650 Title: linux: -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow prepare-package-signed series: Invalid Status in Kernel SRU Workflow promote-to-proposed series: Invalid Status in Kernel SRU Workflow promote-to-security series: Invalid Status in Kernel SRU Workflow promote-to-updates series: Invalid Status in Kernel SRU Workflow regression-testing series: Invalid Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: Invalid Status in linux package in Ubuntu: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow backports: bug 1793652 (linux-lts-trusty) derivatives: To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1793650/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793657] Re: linux: -proposed tracker
** Changed in: linux (Ubuntu) Status: New => Invalid ** Tags removed: kernel-release-tracking-bug-live -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1793657 Title: linux: -proposed tracker Status in linux package in Ubuntu: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1793657/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793652] Re: linux-lts-trusty: -proposed tracker
** Tags removed: kernel-release-tracking-bug-live -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-lts-trusty in Ubuntu. https://bugs.launchpad.net/bugs/1793652 Title: linux-lts-trusty: -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow prepare-package-signed series: Invalid Status in Kernel SRU Workflow promote-to-proposed series: Invalid Status in Kernel SRU Workflow promote-to-security series: Invalid Status in Kernel SRU Workflow promote-to-updates series: Invalid Status in Kernel SRU Workflow regression-testing series: Invalid Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: Invalid Status in linux-lts-trusty package in Ubuntu: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow -- swm properties -- kernel-stable-master-bug: 1793650 To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1793652/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793648] Re: linux: -proposed tracker
** Tags removed: kernel-release-tracking-bug-live -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1793648 Title: linux: -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-lbm series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow promote-to-proposed series: Invalid Status in Kernel SRU Workflow promote-to-security series: Invalid Status in Kernel SRU Workflow promote-to-updates series: Invalid Status in Kernel SRU Workflow regression-testing series: Invalid Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: Invalid Status in linux package in Ubuntu: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow backports: derivatives: To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1793648/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793515] Re: linux: -proposed tracker
** Tags removed: kernel-release-tracking-bug-live -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1793515 Title: linux: -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow prepare-package-signed series: Invalid Status in Kernel SRU Workflow promote-to-proposed series: Invalid Status in Kernel SRU Workflow promote-to-security series: Invalid Status in Kernel SRU Workflow promote-to-updates series: Invalid Status in Kernel SRU Workflow regression-testing series: Invalid Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow snap-release-to-beta series: Invalid Status in Kernel SRU Workflow snap-release-to-candidate series: Invalid Status in Kernel SRU Workflow snap-release-to-edge series: Invalid Status in Kernel SRU Workflow snap-release-to-stable series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: Invalid Status in linux package in Ubuntu: Invalid Status in linux source package in Bionic: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow backports: derivatives: To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1793515/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793158] Re: linux: -proposed tracker
** Tags removed: kernel-release-tracking-bug-live -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1793158 Title: linux: -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow prepare-package-signed series: Invalid Status in Kernel SRU Workflow promote-to-proposed series: Invalid Status in Kernel SRU Workflow promote-to-security series: Invalid Status in Kernel SRU Workflow promote-to-updates series: Invalid Status in Kernel SRU Workflow regression-testing series: Invalid Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow snap-certification-testing series: Invalid Status in Kernel SRU Workflow snap-release-to-beta series: Invalid Status in Kernel SRU Workflow snap-release-to-candidate series: Invalid Status in Kernel SRU Workflow snap-release-to-edge series: Invalid Status in Kernel SRU Workflow snap-release-to-stable series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: Invalid Status in linux package in Ubuntu: Invalid Status in linux source package in Xenial: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow backports: derivatives: kernel-stable-phase:Packaging kernel-stable-phase-changed:Tuesday, 18. September 2018 14:32 UTC -- swm properties -- phase: Packaging To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1793158/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793306] Re: linux: -proposed tracker
** Tags removed: kernel-release-tracking-bug-live -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1793306 Title: linux: -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow prepare-package-signed series: Invalid Status in Kernel SRU Workflow promote-to-proposed series: Invalid Status in Kernel SRU Workflow promote-to-security series: Invalid Status in Kernel SRU Workflow promote-to-updates series: Invalid Status in Kernel SRU Workflow regression-testing series: Invalid Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow snap-certification-testing series: Invalid Status in Kernel SRU Workflow snap-release-to-beta series: Invalid Status in Kernel SRU Workflow snap-release-to-candidate series: Invalid Status in Kernel SRU Workflow snap-release-to-edge series: Invalid Status in Kernel SRU Workflow snap-release-to-stable series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: Invalid Status in linux package in Ubuntu: Invalid Status in linux source package in Xenial: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow backports: derivatives: To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1793306/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1793308] Re: linux: -proposed tracker
** Tags removed: kernel-release-tracking-bug-live -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1793308 Title: linux: -proposed tracker Status in Kernel SRU Workflow: Invalid Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Invalid Status in Kernel SRU Workflow prepare-package-meta series: Invalid Status in Kernel SRU Workflow prepare-package-signed series: Invalid Status in Kernel SRU Workflow promote-to-proposed series: Invalid Status in Kernel SRU Workflow promote-to-security series: Invalid Status in Kernel SRU Workflow promote-to-updates series: Invalid Status in Kernel SRU Workflow regression-testing series: Invalid Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow snap-certification-testing series: Invalid Status in Kernel SRU Workflow snap-release-to-beta series: Invalid Status in Kernel SRU Workflow snap-release-to-candidate series: Invalid Status in Kernel SRU Workflow snap-release-to-edge series: Invalid Status in Kernel SRU Workflow snap-release-to-stable series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: Invalid Status in linux package in Ubuntu: Invalid Status in linux source package in Xenial: Invalid Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow backports: derivatives: To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1793308/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp