RE: [kicad-users] Gerbview and drill file
Sorry for my preceding post : Gerbv is not Gerbview from Kicad ! Regards, Jean-Paul Jean-Paul Gendner 03.88.27.03.44 _ De : kicad-users@yahoogroups.com [mailto:kicad-us...@yahoogroups.com] De la part de Jean-Paul Gendner Envoyé : lundi 18 janvier 2010 14:34 À : kicad-users@yahoogroups.com Objet : RE: [kicad-users] Gerbview and drill file Hi, I do not understand. You said Kicad wont display the drill file and also gerbv will do what you describe in your post, and what I do with GC-Prevue is viewing together a Gerber file and the drill file to see the holes in the pads and so on. Thanks, Jean-Paul Jean-Paul Gendner 03.88.27.03.44 _ De : kicad-users@yahoogroups.com [mailto:kicad-us...@yahoogroups.com] De la part de Robert Envoyé : lundi 18 janvier 2010 13:06 À : kicad-users@yahoogroups.com Objet : Re: [kicad-users] Gerbview and drill file gerbv will do what you describe in your post, but I've not used GC-Prevue so I don't know how it compares. I'm reasonably happy with gerbv; it works nicely alongside kicad. IMHO it is better to use a Gerber viewer that is not connected with the package that created the Gerbers as that minimises the chance of a single programmer making the same mistake twice. Regards, Robert. Jean-Paul Gendner wrote: > Thank you Robert, > > > > That is what I feared. > > I use GC-Prevue to do it. It is important for me because I view > simultaneously the drill file and one of the cupper and mask file, so it is > very easy to see if I have forgotten to check any case in the pad > proprieties during creating a module. This future improvement for Kicad > (gerbview) seems to be very important for me. > > Regards, > > Jean-Paul > > > Jean-Paul Gendner > 03.88.27.03.44 > > _ > > De : <mailto:kicad-users%40yahoogroups.com> kicad-users@yahoogroups.com [mailto: <mailto:kicad-users%40yahoogroups.com> kicad-us...@yahoogroups.com] De la > part de Robert > Envoyé : lundi 18 janvier 2010 09:50 > À : <mailto:kicad-users%40yahoogroups.com> kicad-users@yahoogroups.com > Objet : Re: [kicad-users] Gerbview and drill file > > > Kicad wont display the drill file, but to repeat my very recent post, > gerbv ( <http://gerbv.> http://gerbv. <http://gerbv. <http://gerbv.sourceforge.net/> sourceforge.net/> sourceforge.net/) will > do so nicely. > > Regards, > > Robert. > > Jean-Paul Gendner wrote: >> Hello, >> >> >> >> I have not found a way to view a drill (.drl) file with >> Gerbview. Is this right or how may I do? >> >> >> >> Regards, >> >> Jean-Paul >> >> >> >> >> >> Jean-Paul Gendner >> >> 03.88.27.03.44 >> >> >> >> >> -- >> >> >> No virus found in this incoming message. >> Checked by AVG - www.avg.com >> Version: 9.0.725 / Virus Database: 270.14.142/2623 - Release Date: > 01/15/10 07:35:00 > > > > > > -- > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.725 / Virus Database: 270.14.148/2629 - Release Date: 01/17/10 19:35:00 >
RE: [kicad-users] Gerbview and drill file
Hi, I do not understand. You said Kicad wont display the drill file and also gerbv will do what you describe in your post, and what I do with GC-Prevue is viewing together a Gerber file and the drill file to see the holes in the pads and so on. Thanks, Jean-Paul Jean-Paul Gendner 03.88.27.03.44 _ De : kicad-users@yahoogroups.com [mailto:kicad-us...@yahoogroups.com] De la part de Robert Envoyé : lundi 18 janvier 2010 13:06 À : kicad-users@yahoogroups.com Objet : Re: [kicad-users] Gerbview and drill file gerbv will do what you describe in your post, but I've not used GC-Prevue so I don't know how it compares. I'm reasonably happy with gerbv; it works nicely alongside kicad. IMHO it is better to use a Gerber viewer that is not connected with the package that created the Gerbers as that minimises the chance of a single programmer making the same mistake twice. Regards, Robert. Jean-Paul Gendner wrote: > Thank you Robert, > > > > That is what I feared. > > I use GC-Prevue to do it. It is important for me because I view > simultaneously the drill file and one of the cupper and mask file, so it is > very easy to see if I have forgotten to check any case in the pad > proprieties during creating a module. This future improvement for Kicad > (gerbview) seems to be very important for me. > > Regards, > > Jean-Paul > > > Jean-Paul Gendner > 03.88.27.03.44 > > _ > > De : <mailto:kicad-users%40yahoogroups.com> kicad-users@yahoogroups.com [mailto: <mailto:kicad-users%40yahoogroups.com> kicad-us...@yahoogroups.com] De la > part de Robert > Envoyé : lundi 18 janvier 2010 09:50 > À : <mailto:kicad-users%40yahoogroups.com> kicad-users@yahoogroups.com > Objet : Re: [kicad-users] Gerbview and drill file > > > Kicad wont display the drill file, but to repeat my very recent post, > gerbv ( <http://gerbv.> http://gerbv. <http://gerbv. <http://gerbv.sourceforge.net/> sourceforge.net/> sourceforge.net/) will > do so nicely. > > Regards, > > Robert. > > Jean-Paul Gendner wrote: >> Hello, >> >> >> >> I have not found a way to view a drill (.drl) file with >> Gerbview. Is this right or how may I do? >> >> >> >> Regards, >> >> Jean-Paul >> >> >> >> >> >> Jean-Paul Gendner >> >> 03.88.27.03.44 >> >> >> >> >> -- >> >> >> No virus found in this incoming message. >> Checked by AVG - www.avg.com >> Version: 9.0.725 / Virus Database: 270.14.142/2623 - Release Date: > 01/15/10 07:35:00 > > > > > > -- > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.725 / Virus Database: 270.14.148/2629 - Release Date: 01/17/10 19:35:00 >
Re: [kicad-users] Gerbview and drill file
gerbv will do what you describe in your post, but I've not used GC-Prevue so I don't know how it compares. I'm reasonably happy with gerbv; it works nicely alongside kicad. IMHO it is better to use a Gerber viewer that is not connected with the package that created the Gerbers as that minimises the chance of a single programmer making the same mistake twice. Regards, Robert. Jean-Paul Gendner wrote: > Thank you Robert, > > > > That is what I feared. > > I use GC-Prevue to do it. It is important for me because I view > simultaneously the drill file and one of the cupper and mask file, so it is > very easy to see if I have forgotten to check any case in the pad > proprieties during creating a module. This future improvement for Kicad > (gerbview) seems to be very important for me. > > > > Regards, > > Jean-Paul > > > > > > Jean-Paul Gendner > > 03.88.27.03.44 > > _ > > De : kicad-users@yahoogroups.com [mailto:kicad-us...@yahoogroups.com] De la > part de Robert > Envoyé : lundi 18 janvier 2010 09:50 > À : kicad-users@yahoogroups.com > Objet : Re: [kicad-users] Gerbview and drill file > > > > > > Kicad wont display the drill file, but to repeat my very recent post, > gerbv (http://gerbv. <http://gerbv.sourceforge.net/> sourceforge.net/) will > do so nicely. > > Regards, > > Robert. > > Jean-Paul Gendner wrote: >> Hello, >> >> >> >> I have not found a way to view a drill (.drl) file with >> Gerbview. Is this right or how may I do? >> >> >> >> Regards, >> >> Jean-Paul >> >> >> >> >> >> Jean-Paul Gendner >> >> 03.88.27.03.44 >> >> >> >> >> -- >> >> >> No virus found in this incoming message. >> Checked by AVG - www.avg.com >> Version: 9.0.725 / Virus Database: 270.14.142/2623 - Release Date: > 01/15/10 07:35:00 > > > > > > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.725 / Virus Database: 270.14.148/2629 - Release Date: 01/17/10 > 19:35:00 > No virus found in this outgoing message. Checked by AVG - www.avg.com Version: 9.0.725 / Virus Database: 270.14.148/2629 - Release Date: 01/17/10 19:35:00
RE: [kicad-users] Gerbview and drill file
Thank you Robert, That is what I feared. I use GC-Prevue to do it. It is important for me because I view simultaneously the drill file and one of the cupper and mask file, so it is very easy to see if I have forgotten to check any case in the pad proprieties during creating a module. This future improvement for Kicad (gerbview) seems to be very important for me. Regards, Jean-Paul Jean-Paul Gendner 03.88.27.03.44 _ De : kicad-users@yahoogroups.com [mailto:kicad-us...@yahoogroups.com] De la part de Robert Envoyé : lundi 18 janvier 2010 09:50 À : kicad-users@yahoogroups.com Objet : Re: [kicad-users] Gerbview and drill file Kicad wont display the drill file, but to repeat my very recent post, gerbv (http://gerbv. <http://gerbv.sourceforge.net/> sourceforge.net/) will do so nicely. Regards, Robert. Jean-Paul Gendner wrote: > Hello, > > > > I have not found a way to view a drill (.drl) file with > Gerbview. Is this right or how may I do? > > > > Regards, > > Jean-Paul > > > > > > Jean-Paul Gendner > > 03.88.27.03.44 > > > > > -- > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.725 / Virus Database: 270.14.142/2623 - Release Date: 01/15/10 07:35:00 >
Re: [kicad-users] Gerbview and drill file
Kicad wont display the drill file, but to repeat my very recent post, gerbv (http://gerbv.sourceforge.net/) will do so nicely. Regards, Robert. Jean-Paul Gendner wrote: > Hello, > > > > I have not found a way to view a drill (.drl) file with > Gerbview. Is this right or how may I do? > > > > Regards, > > Jean-Paul > > > > > > Jean-Paul Gendner > > 03.88.27.03.44 > > > > > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.725 / Virus Database: 270.14.142/2623 - Release Date: 01/15/10 > 07:35:00 > No virus found in this outgoing message. Checked by AVG - www.avg.com Version: 9.0.725 / Virus Database: 270.14.147/2628 - Release Date: 01/17/10 07:35:00
[kicad-users] Gerbview and drill file
Hello, I have not found a way to view a drill (.drl) file with Gerbview. Is this right or how may I do? Regards, Jean-Paul Jean-Paul Gendner 03.88.27.03.44