The error occurs only when I try to create a PCB without schematic
nor netlist AND with the DRC active. I don't get any error when the
DRC is OFF, or if I have a schematic and a proper netlist.
That's because you can't have DRC without a netlist; please see my last
post on this subject for
other things).
If you don't want to make a schematic, make a netlist.
Cat
To: kicad-users@yahoogroups.com From: mad...@... Date: Fri, 20
Aug 2010 23:40:39 + Subject: [kicad-users] Re: Type Err(4)
trace near pad issue in Kicad
Well, I made a simple schematic with EEschema, passed
Odd - not much I can add at this point. If you want, you can upload
your files (best to put the sch, brd and netlist or as many of them as
you have) to the files section and I'll have a look at it. (or email them
to me directly)
There maybe some other infringement of the rules going on that you
Yes, you are correct, DRC NEEDs other info in order to work.
In regards to your old PCB requirement, many years ago when we had a
similar situation in needing to recreate a PCB when the tape masters had
been lost we would put the PCB on the copy camera and take a pic of it.
If the board was
: [kicad-users] Re: Type Err(4) trace near pad issue in Kicad
Well, I made a simple schematic with EEschema, passed the electrical check
without trouble, made the netlist, did the CVpcb thing, and routed in PCBnew.
All is fine, so my Kicad build seems to be working.
I tried to add another
