Thanks, Galen.
As it turns out, no, not all files did get the substitution.
I tracked down those which did not and updated and things look better.
Thanks!
Tom
On 04/25/2011 02:13 PM, Galen Charlton wrote:
Hi,
On Apr 25, 2011, at 1:14 PM, Tom Hanstra wrote:
What am I missing? Why
, Galen Charlton wrote:
Hi,
On Apr 25, 2011, at 3:57 PM, Tom Hanstra wrote:
OK, I have loaded some data from another database into my local Koha. I
don't have Zebra up and going yet, but I thought I could get a jump start by
changing the parameters so that it would not use Zebra
To+
--
-
Tom Hanstra Systems Administrator
Hesburgh Libraries of Notre Dame Phone: (574)631-4686
213 Hesburgh Library Email: t...@nd.edu
Notre Dame, IN 46556
Any idiot can
) [warn] No such record type:
grs.marcxml.record
There's the problem, I believe. Looks like rebuild_zebra.pl
http://rebuild_zebra.pl isn't finding your zebra config files. Are
those paths correct?
-Ian
On Thu, Apr 28, 2011 at 10:47 AM, Tom Hanstra t...@nd.edu
mailto:t...@nd.edu wrote
in
koha-config.xml, all are default locations.
How do I get around this?
Thanks,
Tom
--
-
Tom Hanstra Systems Administrator
Hesburgh Libraries of Notre Dame Phone: (574
There are all kinds of files buried which use the default location.
Updating after the fact would be extremely time consuming and, most
likely, I would miss something along the way.
Tom
On 08/30/2011 07:07 PM, Robin Sheat wrote:
Tom Hanstra schreef op di 30-08-2011 om 14:35 [-0400]:
How
that it does?
Thanks,
Tom
--
-
Tom Hanstra Systems Administrator
Hesburgh Libraries of Notre Dame Phone: (574)631-4686
213 Hesburgh Library Email: t...@nd.edu
my version, what do I have to change so that it does?
Thanks,
Tom
Hi Tom
Have you updated the files in
/etc/koha/zebradb
And your koha-conf.xml
Chris
--
-
Tom Hanstra Systems
this error?
Thanks,
Tom
--
-
Tom Hanstra Systems Administrator
Hesburgh Libraries of Notre Dame Phone: (574)631-4686
213 Hesburgh Library Email: t
Thanks, but either this is not the problem or I don't know how to set
the cookie properly.
How can I properly check whether the KohaOpacLanguage cookie is set?
Thanks,
Tom
On 09/06/2011 07:49 PM, Robin Sheat wrote:
Tom Hanstra schreef op di 06-09-2011 om 15:06 [-0400]:
Can someone point me
to the database that made it work again,
then maybe we can fix the problem at its source.
--
-
Tom Hanstra Systems Administrator
Hesburgh Libraries of Notre Dame Phone: (574
-explanatory, but if
there is a more complete data map, that would be useful.
Thanks,
Tom
--
-
Tom Hanstra Systems Administrator
Hesburgh Libraries of Notre Dame Phone: (574)631-4686
Where might I find information on the differences between different
forms of English (specifically en-US vs en-GB) for Koha?
Thanks,
Tom
--
-
Tom Hanstra Systems Administrator
?
You'd need to make sure the en-GB templates all exist, you can do that
by cd to misc/translator
then running
./translate en-GB
Chris
--
-
Tom Hanstra Systems Administrator
file shows the remote
database server configured, so why might the installer not be properly
using that?
Any ideas where to look?
Thanks,
Tom
--
-
Tom Hanstra Systems Administrator
--
-
Tom Hanstra Systems Administrator
Hesburgh Libraries of Notre Dame Phone: (574)631-4686
213 Hesburgh Library Email: t...@nd.edu
Notre Dame, IN 46556
Every day, from here to there, funny
/2011/09/08/how-ldap-connections-work-in-koha-3-4/
Hopefully this will get you started. Let me know if you have any
questions.
-Ian
On Thu, Sep 22, 2011 at 3:04 PM, Tom Hanstra t...@nd.edu
mailto:t...@nd.edu wrote:
Where is the best place to find documentation and maybe examples
I think I figured this out. Adding :636 to the server name seems to be
getting me farther. Still some errors, but they are bind errors rather
than access errors.
Tom
On 09/27/2011 10:39 AM, Tom Hanstra wrote:
Ian,
Is there a setting somewhere for what port Koha attempts to perform
LDAP
running on non-standard ports for your protocol.
-Ian
2011/9/27 Tom Hanstra t...@nd.edu mailto:t...@nd.edu
I think I figured this out. Adding :636 to the server name seems
to be getting me farther. Still some errors, but they are bind
errors rather than access errors.
Tom
--
-
Tom Hanstra Systems Administrator
Hesburgh Libraries of Notre Dame Phone: (574)631-4686
213 Hesburgh Library Email: t...@nd.edu
Notre Dame, IN 46556
Every day, from here
--
-
Tom Hanstra Systems Administrator
Hesburgh Libraries of Notre Dame Phone: (574)631-4686
213 Hesburgh Library Email: t...@nd.edu
Notre Dame, IN 46556
--
-
Tom Hanstra Systems Administrator
Hesburgh Libraries of Notre Dame Phone: (574)631-4686
213 Hesburgh Library Email: t...@nd.edu
Notre Dame, IN 46556
Every day, from here to there, funny things are everywhere
Nicole,
Another thing I noticed. In
1.13.1.6. QueryRemoveStopwords
it looks like the functionality in the current version has changed
slightly from what you have in the docs.
Tom
--
-
Tom Hanstra
--
-
Tom Hanstra Systems Administrator
Hesburgh Libraries of Notre Dame Phone: (574)631-4686
213 Hesburgh Library Email: t...@nd.edu
Notre Dame
/koha
--
-
Tom Hanstra Systems Administrator
Hesburgh Libraries of Notre Dame Phone: (574)631-4686
213 Hesburgh Library Email: t...@nd.edu
Notre
that is trying
to add this as -mm-dd?
Thanks,
Tom
--
-
Tom Hanstra Systems Administrator
Hesburgh Libraries of Notre Dame Phone: (574)631-4686
213 Hesburgh Library
Manager
LibLime, a division of PTFS
Content Management and Library Solutions
11501 Huff Court
North Bethesda, MD 20895
(301) 654-8088 x 151
jwag...@liblime.com
-Original Message-
From: koha-boun...@lists.katipo.co.nz
[mailto:koha-boun...@lists.katipo.co.nz] On Behalf Of Tom Hanstra
Sent
'1315496500' translates to 'Thu, 08 Sep 2011
15:41:40 GMT'.
Did I miss something??
Tom
--
-
Tom Hanstra Systems Administrator
Hesburgh Libraries of Notre Dame Phone: (574)631-4686
also.
If you are on 3.4.0 or later you should have this option available.
Back to your problem what is the rest of the session data is there a
bit that says lasttime: ?
Chris
--
-
Tom Hanstra
Can CAS authentication be used with the Staff Client? I was able to get
it working with the OPAC, but not on the Staff side.
Thanks,
Tom
-
Tom Hanstra Systems Administrator
to the bug and is in 3.6 (and will likely be picked back
into a future 3.4 revision).
Liz Rea
l...@nekls.org mailto:l...@nekls.org
On Oct 25, 2011, at 10:21 AM, Tom Hanstra wrote:
I just noticed that Logout of the Staff Client for 3.4.5 is not
working properly. Choosing
the same (opac-user.pl). So, where is the
redirection to this screen happening? And why is my secure host not
getting to it?
Thanks,
Tom
--
-
Tom Hanstra Systems Administrator
where this way might cause a problem.
Thanks,
Tom
--
-
Tom Hanstra Systems Administrator
Hesburgh Libraries of Notre Dame Phone: (574)631-4686
213 Hesburgh Library
--
-
Tom Hanstra Systems Administrator
Hesburgh Libraries of Notre Dame Phone: (574)631-4686
213 Hesburgh Library Email: t...@nd.edu
Notre Dame, IN 46556
this setting change.
Thanks,
Tom
--
-
Tom Hanstra Systems Administrator
University Libraries of Notre Dame Phone: (574)631-4686
213 Hesburgh Library Email
Is there any documentation available on how I might run a patron import
as a command line instead of interactively loading the data via Koha tools?
Thanks,
Tom
--
-
Tom Hanstra
--
-
Tom Hanstra Systems Administrator
University Libraries of Notre Dame Phone: (574)631-4686
213 Hesburgh Library Email: t...@nd.edu
Notre Dame, IN 46556
Time flies like an arrow. Fruit flies like
of 3.6.2.
Thanks,
Tom
--
-
Tom Hanstra Systems Administrator
University Libraries of Notre Dame Phone: (574)631-4686
213 Hesburgh Library Email: t
be worth a shot.
Kind Regards,
Chris
___
Koha mailing list http://koha-community.org
Koha@lists.katipo.co.nz
http://lists.katipo.co.nz/mailman/listinfo/koha
--
-
Tom
me a bit of the history of what made that change and why InnoDB is
the desired storage method at this point. What functionality might be
lost if I switched my local storage to MyISAM?
Thanks,
Tom
--
-
Tom
of other ways in which to get the change
into place.
So, I'm interested in understanding how others handle this. How does a
single patch best get moved into place for testing without mucking up
the localizations which have been made?
Thanks,
Tom
On 03/05/2012 06:14 PM, Tom Hanstra wrote
? I find very few files
copied over; and almost all are in the misc/translator directory.
Thanks,
Tom
On 03/06/2012 04:10 PM, Chris Cormack wrote:
* Tom Hanstra (t...@nd.edu) wrote:
I need to explain a bit more what I'm currently trying to understand...
I can use what I've learned to compile
--
Tom Hanstra Systems Administrator
Hesburgh Libraries of Notre Dame Phone: (574)631-4686
213 Hesburgh Library Email: t...@nd.edu
Notre Dame, IN 46556
Now, here, you see, it takes all the running you can
outstanding fines, checked out books, etc. Just whacking the borrowers
table won't check those things. So what all else do I need to check
before deletion?
Thanks,
Tom
--
Tom Hanstra Systems
#AnonymousPatron
Hope that helps,
Katrin
-Ursprüngliche Nachricht-
Von: Tom Hanstra [mailto:t...@nd.edu]
Gesendet: Mo 16.04.2012 22:26
An: Fischer, Katrin
Betreff: Re: AW: [Koha] Bulk patron anonymize/delete tool
We are seeing similar results to what you mention, in that the tool says
? Not the cardnumber?
(Just checking)
Chris
--
Tom Hanstra Systems Administrator
Hesburgh Libraries of Notre Dame Phone: (574)631-4686
213 Hesburgh Library Email: t
are doing differently.
Chris
--
Tom Hanstra Systems Administrator
Hesburgh Libraries of Notre Dame Phone: (574)631-4686
213 Hesburgh Library Email: t
. As an
example, you can connect to Google either by http://google.com or by
https://google.com, because Google has enabled this. The latter creates
a secure, end-to-end connection.
--
Tom Hanstra
? I've not seen
where that option can be set.
Thanks,
Tom
On 04/17/2012 10:16 AM, Tom Hanstra wrote:
What are your other system preference values with regard to Privacy?
Perhaps we have a different combination of options in place?
We have:
Don't Allow AnonSuggestions
Keep
transaction was being attempted.
Anyone have an idea of what might be going on?
Thanks,
Tom
--
Tom Hanstra Systems Administrator
Hesburgh Libraries of Notre Dame Phone: (574)631
the syspref is for anonymizing the checkout
history? I tried searching the preferences and my past emails but can't
find it.
Thanks.
--
Tom Hanstra Systems Administrator
Hesburgh Libraries
versions. Is there an advantage to installing from the git repository
if we won't be looking for the latest patches? Are upgrades made easier
if git is used?
Thanks for your advice,
Tom
--
-
Tom Hanstra
/biblios/register/
total 4
-rw-r--r-- 1 tanturprod koha 0 Oct 3 12:25 junk
-rwxrwxrwx 1 tanturprod koha 27 Sep 23 09:21 README
What should I be looking for? What am I missing?
Thanks,
Tom
--
-
Tom Hanstra
verbose logging method?
Tom
On 10/3/13 12:55 PM, Paul wrote:
At 12:27 PM 10/3/2013 -0400, Tom Hanstra wrote:
I'm probably missing something basic somewhere, but my zebra indexes are
not getting created as expected. It looks as if it is creating the index:
[snip]
And it is not a file
have a package installation. Your
path suggests a tarball installation. You only showed one directory. Did you
check all the subdirectories?
Just some further thoughts.
GPML,
Mark Tompsett
--
-
Tom Hanstra
For Koha 3.12.05, what are the versions of Yaz and Zebra which are known
to work? I'm finding that some of the latest combinations are not
working. Is there an approved version of each that is known to work
with the latest version of Koha?
Thanks,
Tom
On 10/3/13 6:30 PM, Tom Hanstra wrote
.
But this combination does, so I'm back in business.
Tom
On 10/7/13 10:23 AM, Colin Campbell wrote:
On Sun, Oct 06, 2013 at 01:56:04PM -0400, Tom Hanstra wrote:
Some might not have seen this since it was an update on an earlier thread...
I'm running 3.12.05 on RHEL6 and have found
this problem down and address it?
Thanks,
Tom
--
-
Tom Hanstra Systems Administrator
Hesburgh Libraries of Notre Dame Phone: (574)631-4686
208 Hesburgh Library
and environment information for the cron processes, they
were able to run properly.
Robin: Thanks for checking in. My internet access here in the frozen
midwest was limited Monday and Tuesday, hence my late reply.
Tom
On 1/6/14 5:05 PM, Robin Sheat wrote:
Tom Hanstra schreef op ma 06-01-2014 om 13:35
___
Koha mailing list http://koha-community.org
Koha@lists.katipo.co.nz
http://lists.katipo.co.nz/mailman/listinfo/koha
--
-
Tom Hanstra Systems Administrator
Hesburgh
fundamental.
Thanks,
Tom
--
-
Tom Hanstra Systems Administrator
Hesburgh Libraries of Notre Dame Phone: (574)631-4686
208 Hesburgh Library Email: hans
. Others I'm not so sure about.
How can I best tell if the database after upgrade is missing anything?
Are there integrity checks which can be run or do we just have to
stumble on problems if/when we are missing functionality?
Thanks,
Tom
On 5/12/14, 12:25 PM, Tom Hanstra wrote:
When upgrading my
but don't pass some of the rule checks implemented. Should I
be trying to clean that up? Or might future versions of the upgrade
process do some of that for me later?
Thanks,
Tom
--
-
Tom Hanstra
When I attempt to batch load a record in a new Koha installation, I'm
seeing the following error in the Koha error log:
[Tue Aug 05 16:25:09 2014] [error] [client 10.41.63.84] [Tue Aug 5
16:25:09 2014] stage-marc-import.pl: DBD::mysql::st execute failed: Field
'marcxml_old' doesn't have a
makes little sense when paying
with credit cards anyway.
Is there any workaround for this?
Thanks
Tom Hanstra
___
Koha mailing list http://koha-community.org
Koha@lists.katipo.co.nz
http://lists.katipo.co.nz/mailman/listinfo/koha
I'm trying to track down a problem that occurs on upgrade.
I have two servers which should be identical because one was cloned from
the other. However, on the newer, cloned server, when I upgrade from
3.06.04 to the same 3.14.07 version of Koha, the second server times out
with this error in the
If memcache has been enabled, is there a way to test to be sure Koha is
using it? What can I look for?
Thanks,
Tom
___
Koha mailing list http://koha-community.org
Koha@lists.katipo.co.nz
http://lists.katipo.co.nz/mailman/listinfo/koha
think that was ever true.
-- Owen
--
Web Developer
Athens County Public Libraries
http://www.myacpl.org
___
Koha mailing list http://koha-community.org
Koha@lists.katipo.co.nz
http://lists.katipo.co.nz/mailman/listinfo/koha
--
*Tom Hanstra
ose anything by rolling back to that level of Yaz?
Thanks for any help or ideas you can give,
Tom
--
*Tom Hanstra*
*Sr. Systems Administrator*
hans...@nd.edu
<http://library.nd.edu/>
___
Koha mailing list http://koha-community.org
Koha@lists.kat
. Otherwise, we would work on supporting them.
>
> Was CentOS what you were running on?
>
> El lun., 6 jun. 2016 a las 13:32, Tom Hanstra (<hans...@nd.edu>) escribió:
>
>> I've been looking more into the facets with Zebra a bit and have
>> determined
>> that,
.
It could be that I don't have the right version of Yaz when
installing/configuring that module. I cannot be sure because I don't know
what version I should use, so I just grabbed the latest one.
How can I be sure I have the right versions of everything?
Thanks,
Tom
--
*Tom Hanstra*
*Sr. Systems
ndex your
> DB so it actually contains the indexes used for retrieving the facets.
>
> 2016-05-19 13:36 GMT-03:00 Tom Hanstra <hans...@nd.edu>:
>
>> I'm not sure I understand how facets work.
>>
>> I'm testing V3.22 (both .04 and .06) and have found that running w
I have already tried adding in both uuid-devel and libuuid-devel but UUID
still does not want to install.
Tom
On Mon, May 23, 2016 at 4:32 AM, Colin Campbell <
colin.campb...@ptfs-europe.com> wrote:
> On Thu, May 19, 2016 at 11:16:39AM -0400, Tom Hanstra wrote:
> &
says it is missing on upgrade. Why? Where is
it looking for the current version that is different from where CPAN
installed it?
--
Any assistance with either of these would be helpful as I debug this.
--
*Tom Hanstra*
*Sr. Systems Administrator*
hans...@nd.edu
<http://library.nd.
that works and 1 does
not. But I do want to understand the tradeoffs and why it is working as it
is.
Thanks,
Tom
--
*Tom Hanstra*
*Sr. Systems Administrator*
hans...@nd.edu
<http://library.nd.edu/>
___
Koha mailing list http://koha-community.or
the
Internet, point your browser at http://www.perl.org/, the Perl Home Page.
On Thu, May 19, 2016 at 11:19 AM, Tomas Cohen Arazi <tomasco...@gmail.com>
wrote:
> perl --version
--
*Tom Hanstra*
*Sr. Systems Administrator*
hans...@n
The file is attached. I did not change this in any way that I am aware of.
Thanks,
Tom
On Fri, May 20, 2016 at 9:19 AM, Tomas Cohen Arazi <tomasco...@gmail.com>
wrote:
> r /etc/koha/zebradb/marc_defs/marc21/biblios/biblio-koha-indexdefs.xm
>
--
*Tom Hanstra*
*Sr. Systems A
of this, with information on what changes need to be made within
Koha as well as example httpd configuration, that would really help. Or
maybe there is additional documentation somewhere that is more complete?
Thanks in advance,
Tom Hanstra
--
*Tom Hanstra*
*Sr. Systems Administrator*
hans...@nd.edu
<h
ng to your data, if you
> have the information at the record level, set it back.
>
> Good luck,
>
> Pedro Amorim
>
>
>
>
>
>
>
> 2017-04-19 16:13 GMT+00:00 Tom Hanstra <hans...@nd.edu>:
>
>> I'm installing Koha 16.11 and picked up the 06 release.
was included in the 16.11.06 tar
package.
Do I have database problems with these records? If so, what should I be
looking for?
Or is there something else that can cause this problem?
Or is the patch missing from this download?
Thanks in advance for any pointers I can get.
Tom
--
*Tom Hanstra
--
Does anyone know if there is a newer version of Koha which addresses these
issues?
Thanks,
Tom
--
*Tom Hanstra*
*Sr. Systems Administrator*
hans...@nd.edu
<http://library.nd.edu/>
___
Koha mailing list http://koha-community.or
--
*Tom Hanstra*
*Sr. Systems Administrator*
hans...@nd.edu
<http://library.nd.edu/>
___
Koha mailing list http://koha-community.org
Koha@lists.katipo.co.nz
https://lists.katipo.co.nz/mailman/listinfo/koha
the upgrade to check that perl modules were in place, the database
user had access, etc.
Koha continues to mature as a system. Thanks to those who do development
for a great product.
Tom
--
*Tom Hanstra*
*Sr. Systems Administrator*
hans...@nd.edu
<http://library.nd.
.
Is there a limitation in Koha on the number of records in a Marc file? Or
in the size of the file? Are there settings which can be changed to upload
larger files?
Thanks,
Tom
--
*Tom Hanstra*
*Sr. Systems Administrator*
hans...@nd.edu
<http://library.nd.edu/>
__
> Visitenos en www.perusms.com
>
>
> Le mar. 2 avr. 2019 à 14:20, Tom Hanstra a écrit :
>
>> I have two files to upload into Koha using the Stage MARC records import
>> tool.
>>
>> One with 500 records properly uploads and allows me the options for
.
Thanks,
Tom
On Thu, Mar 21, 2019 at 12:43 PM Tom Hanstra wrote:
> Can someone point me to documentation on the current state of indexing for
> 18.11? I seem to recall a year or two ago some information on support for
> Solr and now I see some info on Elasticsearch. Are either of th
Where am I missing the documentation for adding memcached to Koha?
I don't currently have it installed but would like to try it. Where can I
find instructions on how to properly add the software and configure it and
then configure Koha to use it?
Tom
--
*Tom Hanstra*
*Sr. Systems Administrator
--
*Tom Hanstra*
*Sr. Systems Administrator*
hans...@nd.edu
<http://library.nd.edu/>
___
Koha mailing list http://koha-community.org
Koha@lists.katipo.co.nz
https://lists.katipo.co.nz/mailman/listinfo/koha
after logins in a similar way.
I'm running Koha 18.11.4.
Thanks,
Tom
--
*Tom Hanstra*
*Sr. Systems Administrator*
hans...@nd.edu
<http://library.nd.edu/>
___
Koha mailing list http://koha-community.org
Koha@lists.katipo.co.nz
https://lists.katipo
y en mas de 180 paises. Use aplicaciones 2 vias via
> SMS
> > y GPRS online
> >Visitenos en www.perusms.com
> >
> >
> > Le mar. 23 avr. 2019 à 09:59, Tom Hanstra a écrit :
> >
> >> Based upon a blog post from a couple of versions back,
> > Koha-devel mailing list
> > koha-de...@lists.koha-community.org
> > http://lists.koha-community.org/cgi-bin/mailman/listinfo/koha-devel
> > website : http://www.koha-community.org/
> > git : http://git.koha-community.org/
> > bugs : http://bugs.koha-community.org/
> >
>
> --
>
tal
> zebra re-index as follows
> */2 * * * * /usr/sbin/koha-rebuild-zebra --force instance
>
> Kind regards
>
>
> On Thu, May 2, 2019 at 7:29 PM Tom Hanstra wrote:
>
>> I've been trying to work on switching our login authorization to
>> Shibboleth
>> usi
with this combination (Shibboleth and
OKTA)? I could use some coaching through the various options.
Thanks,
Tom
--
*Tom Hanstra*
*Sr. Systems Administrator*
hans...@nd.edu
<http://library.nd.edu/>
___
Koha mailing list http://koha-community.or
in advance for any guidance you can provide,
Tom
--
*Tom Hanstra*
*Sr. Systems Administrator*
hans...@nd.edu
<http://library.nd.edu/>
___
Koha mailing list http://koha-community.org
Koha@lists.katipo.co.nz
https://lists.katipo.co.nz/mailman/listinfo/koha
What is the current status of ElasticSearch for Koha 19.11? Would others
recommend switching from Zebra to ElasticSearch or would you say it is
still not quite ready for production use?
Thanks,
Tom
--
*Tom Hanstra*
*Sr. Systems Administrator*
hans...@nd.edu
I'm getting a 404 error from:
http://download.koha-community.org/koha-latest.tar.gz
Did something get missed when deploying the current version of Koha?
--
*Tom Hanstra*
*Sr. Systems Administrator*
hans...@nd.edu
___
Koha mailing list http://koha
ost:9200/_cat/indices
yellow open koha_london_test_20_biblios VRgVHrtDQ0S1oBGFJRVjjA 5 1
12287 0 138.9mb 138.9mb
yellow open koha_london_test_20_authorities AQOw74fbQYqnm63KuZQ0zQ 5 1
6163 0 8mb 8mb
Should those be green after indexing is completed? Is there something that
moved it on to green?
Th
or the other of the above Debian based packages.
I'm assuming that Koha can work with Elasticsearch on any Linux
distribution, with the right setup. If so, can someone help fill in the
gaps between Debian and the other Linuxes.
Thanks,
Tom
--
*Tom Hanstra*
*Sr. Systems Administrator*
hans...@nd.edu
knows what the indices should be but also seems to know that
they do not yet exist:
Nodes: localhost:9200 | Status: running | Indices:
koha_london_test_20_biblios (count: -1), koha_london_test_20_authorities
(count: -1)
Anyone seen this type of error or have ideas on what might be going on with
this particular
ve the analysis-icu plugin [1] installed?
>
> [1]
>
> https://www.elastic.co/guide/en/elasticsearch/plugins/current/analysis-icu.html
>
> On 31/03/2020 00:35, Tom Hanstra wrote:
> > Earlier testing of Koha 19.11.03 with Elasticsearch 7 and 6 both gave
> > errors. There was som
1 - 100 of 111 matches
Mail list logo