KR> Prop Tracking

According the Murphy's law..the prop is straight, the rest of the plane is bent. -- Glenn Martin, KR2 N1333A, Biloxi, MS

KR> Prop Tracking

Sensenich allows 1/8" See N64KR at http://KRBuilder.org - Then click on the pics  See you at the 2012 - KR Gathering in Mt. Vernon, Il – MVN – 40th Anniversary There is a time for building and it never seems to end. Daniel R. Heath - Lexington, SC -Original Message- The specs for the

KR> Prop Tracking

Maybe check hub run out to be sure there is no problem there first?? John Martindale 29 Jane Circuit Toormina NSW 2452 Australia ph:61 2 6658 4767 m:0403 432179 email:john_martind...@bigpond.com

KR> Prop Tracking

1/4" error in prop tracking will cause a pretty significant vibration. - Original Message - From: R. Lee Jarvis Sent: 11/26/11 04:43 PM To: KRnet Subject: Re: KR> Prop Tracking The specs for the McCauley 7447 on my Luscombe allow up to 1/4" tracking error, so you may be OK. Or you may

KR> Prop Tracking

Make a note of which tip is leading, then swap the prop 180 degrees on the hub. If the same tip is leading, it's a prop issue. If the other tip is leading, it's a hub issue. If it is a new Sensinich prop, I expect they will warranty the prop. If it's a hub issue, you can either tear into the

KR> Prop Tracking

I forgot to mention. NOTE: Do not exceed the range specified on the prop. - Original Message - From: "Mark Jones" To: "KRnet" Sent: Saturday, November 26, 2011 5:46 PM Subject: Re: KR> Prop Tracking - Original Message - From:

KR> Prop Tracking

- Original Message - From: "Dan Heath" I have a Sensenich prop and it tracks 3/16" different from tip to tip. I have always used Sterba props in the past and have never had this problem. So, what to do to correct this? It seems like a defect in the prop, but

KR> Prop Tracking

The specs for the McCauley 7447 on my Luscombe allow up to 1/4" tracking error, so you may be OK. Or you may want to have it overhauled. - Original Message - From: "Dan Heath" To: "'KRnet'" Sent: Saturday, November 26, 2011 6:21 PM Subject: KR>

KR> Prop Tracking

Sensenich says 1/8" is max. See here: http://www.sensenich.com/files/documents/Installation_Instructions_Wood_Aircraft_Installation_1261581692.pdf. Try removing the prop check the face of the prop and conterbores. install the prop 180 degrees from previous, using the above instruction and

KR> Prop Tracking

I have a Sensenich prop and it tracks 3/16" different from tip to tip. I have always used Sterba props in the past and have never had this problem. So, what to do to correct this? It seems like a defect in the prop, but maybe not. See N64KR at http://KRBuilder.org -

KR> eBay items

There's an EFS-2, a Leburg ignition, .044 heads & some other items currently on eBay from seller "umgibso1". EFS-2 eBay item # 270860981451 Hyatt Summerfield Suites All Suites Hotel with a Full Kitchen. Free Breakfast & Wi-Fi. Book Now