Sensenich says 1/8" is max. See here: http://www.sensenich.com/files/documents/Installation_Instructions_Wood_Aircraft_Installation_1261581692.pdf. Try removing the prop check the face of the prop and conterbores. install the prop 180 degrees from previous, using the above instruction and recheck tracking. If it is not in spec call Sensenich and get their input. I have always found them very helpful.
Deems > From: [email protected] > To: [email protected] > Date: Sat, 26 Nov 2011 18:21:33 -0500 > Subject: KR> Prop Tracking > > I have a Sensenich prop and it tracks 3/16" different from tip to tip. I > have always used Sterba props in the past and have never had this problem. > So, what to do to correct this? It seems like a defect in the prop, but > maybe not. > > > > See N64KR at <http://krbuilder.org/> http://KRBuilder.org - Then click on > the pics > > See you at the 2012 - KR Gathering in Mt. Vernon, Il - MVN - 40th > Anniversary > > There is a time for building and it never seems to end. > > Daniel R. Heath - Lexington, SC > > > > > > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to [email protected] > please see other KRnet info at http://www.krnet.org/info.html
