On 11/5/2017 5:54 PM, Jeff Scott via KRnet wrote:
Larry, I'll give you the Whelen wigwag controller brick once I remove it.
Thanks, Jeff. I'd appreciate that.
This whole thing on strobes is quite confusing. I'd prefer to go with
LED for less curr
Sent: Sunday, November 05, 2017 at 3:04 PM
From: "Flesner via KRnet"
To: "Mike Stirewalt via KRnet"
Cc: Flesner
Subject: Re: KR> Strobe power supply
On 11/5/2017 3:35 PM, Mike Stirewalt via KRnet wrote:
> Two questions Larry: Why is it that you "never use
On 11/5/2017 3:35 PM, Mike Stirewalt via KRnet wrote:
Two questions Larry: Why is it that you "never use them."?
Also, if they work well . . . and I assume they work at least as well as
mine which work great . . . why are you going to "aircraft quality" if
what you've got works just fine? Tryi
Larry said,
> "I've been flying with "cheap" strobes for 13 years now, never use them
. . ."
I've got cheap strobes too - the ones Steve & Linda sold in kit form
(minus the lighting fixture) for around $35. I ended up buying four. I
use one for a "rotating" beacon on the bottom of the plane (
The length of wire from the power sorce to the light (LED) is not a
problem. Not a lot of current draw, and heat is not a problem if you use a
proper size wire. I would suggest you run shielded wire and ground the
shield at the power source not at the wing tip. This will keep electrical
noise down.
Larry,
We installed also a cheap led strobe. The are also very lightAnd bright.
Stef
> Op 5 november 2017 om 18:00 schreef Chris Gardiner via KRnet
> :
>
>
> Larry,
> Have you considered replacing your standard position wing tip bulb with one of
> the new LED types that works as a strobe or
Larry,
Have you considered replacing your standard position wing tip bulb with one of
the new LED types that works as a strobe or constant light?
Aircraft Spruce has them for approx. $25 and might be a cheap solution.
I bought one to try out and it works great.
I just need to figure out how to get
There are strobe units out there that all you need is a power wire to the
strobe and if you need it to time with the other wing you will need another
wire to hook those two together. They are not cheap there about $300 apiece.
Single flash I just put them on my 310 last month along with a tail s
trying to convert this to wing
tip if you didn't have it run this built this way to begin with.
Thanks,
Rob Schmitt
N1852Z
-Original Message-
From: Flesner via KRnet
To: KR net
Cc: Flesner
Sent: Sun, Nov 5, 2017 7:48 am
Subject: KR> strobe power supply
I've been flyin
On 11/5/2017 7:48 AM, Flesner via KRnet wrote:
I've had to switch to a new e-mail program so if things look wacky I'm
still learning. Like the changing text style in the message above
which I have no idea why. I'm getting too old for changes like this.
It's traumatic.
Larry Flesner
I've been flying with "cheap" strobes for 13 years now, never use them,
and I'm considering upgrading to some aircraft quality strobes. Current
strobes are on the fuselage, top and bottom, but I'd like to mount them
on the wing, piggyback to my position lights.
My concerns: I assume the p
The 'pet-peeve' is one of the funniest write-ups I have ever read! I
burst out laughing & startled the dickens out of my bride!
Thank you!
Jack Cooper wrote:
> I was wondering where others have mounted their power supplies for the
> strobes
Jack,
I have had good luck with the location that I choose for my Kuntzlman strobes
as can be seen in the 9th picture down of this link
http://www.krnet.org/krs/jhorton/
The one thing that
Jack Cooper wrote:
> I was wondering where others have mounted their power sulpplies for the
> strobes
I haven't mounted mine yet, but did a good bit of research and have wiring
run already (the breaker's even hooked up and the connectors are installed)
to the wingtip, just as you say. My pla
I was wondering where others have mounted their power sulpplies for the
strobes. I have a set of aeroflash as seen at
http://www.aircraftspruce.com/catalog/elpages/aeroflashNav.php . I think its
best to locate the power supply near the strobe to cut down on interference so
I'm thinking of
I also found a Great Planes aircraft strobe kit. Sells for 32.95 + Shipping.
$20 includes shipping.
Jack Cooper
Rob,
I saw the following caption under one of your pictures:
The RC Servo trim system was said to be unsafe by the DAR
so in its spot is the ELT remote panel.
Just what did he consider "UNSAFE" about your setup?
Even a total runaway of the system to a limit could
be over-ridden with the contr
See my strobe lights for sale at
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2441861047
5 percent discount to any current KRNET person.
Sport Pilots don't fly at night. Happy Friday to you all.
Ron Freiberger
KR2Sport guy at rfreiberger at swfla.rr.com
BTW, Elliso
Netters,
I have an Aeroflash single flash 3 way Nav/Strobe/Position light assembly. It
contains 2 individual strobe power supplies. I am wondering if it would cause
problems mounting the power supplies in the first bay of the wings themselves,
and then sealing the rib back up? This position put
19 matches
Mail list logo