If I remember correctly, if you have more then one 3C509, you'll have to
specify the io irq for both cards when you load the module. It only probs
for one card automagically.
Stefaan
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Somerlot, Chris
?
Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Stefaan Van
Dooren
Sent: Thursday, June 26, 2003 3:22 AM
To: [EMAIL PROTECTED]
Subject: RE: [leaf-user] Re: Trouble getting started
If I remember correctly, if you have more then one 3C509
PROTECTED]
Sent: Wednesday, June 25, 2003 12:18 PM
To: Somerlot, Chris; [EMAIL PROTECTED]
Subject: Re: [leaf-user] Re: Trouble getting started
I don't remember what dist you're running, but I assume it's
a recent one
with Shorewall?
Have you declared both interfaces?
If you run lsmod
Have you tried just having one 3c509 card in the machine?
The cards may all be at same io port.
Are the cards in plug and pray mode? I think linux may not like that!
You may need to use the dos setup program to set cards up.
HTH.
On Thu, 26 Jun 2003, Somerlot, Chris wrote:
Date: Thu, 26 Jun
Hello,
Have you tried just having one 3c509 card in the machine?
The cards may all be at same io port.
Are the cards in plug and pray mode? I think linux may not
like that! You may need to use the dos setup program to set
cards up. HTH.
I agree. I have 2 3c509 cards. Nothing works until
At 05:13 PM 6/26/2003 +0200, Patrick Benson wrote:
Somerlot, Chris wrote:
I've tried 2 different sets of ISA 3C509 cards, get the same problems. I'm
not sure the cards are setup right.
DId you try my suggestion of testing the cards one at a time, always in the
same isa slot? Assuming eth0
On Thursday 26 June 2003 07:10 am, Somerlot, Chris wrote:
Actually what I get is:
Module PagesUsed by
ip_nat_irc 2176 0 (unused)
ip_nat_ftp 2784 0 (unused)
ip_conntrack_irc2880 1
ip_conntrack_ftp3648 1
3c509
At 08:21 AM 6/25/2003 -0700, Somerlot, Chris wrote:
Still can't get it going. I have loaded the module for the 3c509 driver,
(I'm using 2 ISA 3c509B cards) but only get 1 showing up in ip addr:
1: lo: LOOPBACK,UP mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
I don't remember what dist you're running, but I assume it's a recent one
with Shorewall?
Have you declared both interfaces?
If you run lsmod, you should see something like:
ip_nat_irc 2032 0 (unused)
ip_nat_ftp 2672 0 (unused)
ip_conntrack_irc2144 0
Chris
Somerlot, Chris wrote the following at 17:21 25.06.2003:
Still can't get it going. I have loaded the module for the 3c509 driver,
(I'm using 2 ISA 3c509B cards) but only get 1 showing up in ip addr:
1: lo: LOOPBACK,UP mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd
10 matches
Mail list logo
