Re: Error building on MacOS

On 4.2.2024 15.15, Stanisław Jeśmanowicz wrote: Hello Adlair, I had also problems to install LibreOffice on MacOS. But after many tries and errors, I made it. Here's how it was: - My Mac is: MacBook Pro - chip: Apple M2 Max chip - macOS: Sonoma 14.2.1 I use  MacPorts base version 2.9.1 for

Re: Error building on MacOS

Hello Adlair, I had also problems to install LibreOffice on MacOS. But after many tries and errors, I made it. Here's how it was: - My Mac is: MacBook Pro - chip: Apple M2 Max chip - macOS: Sonoma 14.2.1 I use  MacPorts base version 2.9.1 for open source software tools. - run:   xcode-select

Re: Error building on MacOS

that looks like something got corrupted in your build dir, I would try doing 'make clean' and then 'make' On Fri, 2 Feb 2024 at 04:33, Adlair Cerecedo Mendez < adlair.cerec...@ugd.gob.mx> wrote: > Hello everyone. > > I'm trying to build LO on MacOS Ventura, I got two errors, the first one > is

Error building on MacOS

Hello everyone. I'm trying to build LO on MacOS Ventura, I got two errors, the first one is fixed but I need help to fix the second one. The full bug trace is here: https://gitlab.com/-/snippets/3645364. Can somebody help me? Thanks in advance. Adlair

Re: Error building LibreOffice on Windows (Cygwin)

On 12.3.2022 19.12, Ahmed Abdelatty Mohamed Radalla wrote: Greetings, I am trying to build LibreOffice on Windows using LODE. I installed the prerequisites (MSVC & JDK) and then followed the instructions on the wiki. When it was time to build, I got this error: checking the dependency

Error building LibreOffice on Windows (Cygwin)

Greetings,I am trying to build LibreOffice on Windows using LODE. I installed the prerequisites (MSVC & JDK) and then followed the instructions on the wiki. When it was time to build, I got this error:checking the dependency generation prefix (clang.exe -showIncludes)... configure: error: cannot

Error Building On Debian Buster 32bit

Hi, I tried to build LibreOffice on a Debian-32 box from source. I got the following output in the shell (shortend: only the end of the messages). I retried with 'make clean && make' with the same result. * --- [DEP] LNK:Library/libacclo.so [DEP] LNK:Library/libsotlo.so

Re: error building libreoffice online android in android studio

On 10/02/2020 08.15, Michael Weghorn wrote: >> [...] >> '# ARM Android >> --with-distro=LibreOfficeAndroid >> --with-distro=LibreOfficeAndroidX86 >> # or Android x86 ( preferable if using an AVD Emulator ) >> --with-android-sdk=/home/rutuja/Android/Sdk >>

Re: error building libreoffice online android in android studio

Hi, On 09/02/2020 16.49, RUTUJA BHAGWAN KENDRE wrote: > Hello everyone >   I am trying to  build libreoffice online android in android studio. I > get this error > > 'Build command failed. > Error while executing process > /home/rutuja/Android/Sdk/cmake/3.6.4111459/bin/cmake with arguments >

error building libreoffice online android in android studio

Hello everyone I am trying to build libreoffice online android in android studio. I get this error 'Build command failed. Error while executing process /home/rutuja/Android/Sdk/cmake/3.6.4111459/bin/cmake with arguments {--build /home/rutuja/online/android/lib/.cxx/cmake/debug/armeabi-v7a

Re: Error Building LibreOoffice 5.3.7.2

5.3.7 is outdated, and Collada has been removed from the code recently, IIRC. You should consider to go with 5.4 or master but in case you like weird challenges the compiler switch --disable-collada might be your friend. On 12.03.2018 23:54, Curtis Hamilton wrote: > I'm not sure what has

Error Building LibreOoffice 5.3.7.2

I'm not sure what has changed, but after many successful builds, I'm now unable to build LO 5.3.7.2. I'm getting the following error: [LNK] Executable/gengal.bin S=/usr/ports/editors/libreoffice/work/libreoffice-5.3.7.2 && I=$S/instdir && W=$S/workdir && /usr/local/bin/ccache g++6

Re: Error building

On Thu, Mar 1, 2018 at 12:52 AM, fady esam wrote: > When i try to build the project pn windows with cygwin it gives me this > error > > configure: error: al.exe not found as /al.exe > Error running configure at /cygdrive/c/sources/core/autogen.sh line 289. > > > even tho i

Re: Error building

On 01.03.2018 00:52, fady esam wrote: > When i try to build the project pn windows with cygwin it gives me this > error  > > configure: error: al.exe not found as /al.exe > Error running configure at /cygdrive/c/sources/core/autogen.sh line 289. > > > even tho i have the latest windows sdk..

Re: Error building

Hi, fady esam schrieb am 01.03.2018 um 00:52: When i try to build the project pn windows with cygwin it gives me this error configure: error: al.exe not found as /al.exe Error running configure at /cygdrive/c/sources/core/autogen.sh line 289. even tho i have the latest windows sdk.. what

Error building

When i try to build the project pn windows with cygwin it gives me this error configure: error: al.exe not found as /al.exe Error running configure at /cygdrive/c/sources/core/autogen.sh line 289. even tho i have the latest windows sdk.. what should i do?

Re: error building LO on kde4

[re-send with the proper To:, i'm too stupid to send email today] On 08.08.2017 12:21, Xavier van wijmeersch wrote: > trying to build a new LO alpha6.0.0 this morning > see pdf pdf? sigh, at least it's not a jpeg... breakpad fails to build: >

error building LO on kde4

trying to build a new LO alpha6.0.0 this morning see pdf thx best regards builderror_20170808_11:30.pdf Description: Adobe PDF document ___ LibreOffice mailing list LibreOffice@lists.freedesktop.org

Re: Error building LO on local system

> I use a commant like this: > git checkout master && ./g pull -r && for branch in $(git branch | cut -c > 3-) ; do if [ $branch != "master" ] ; then git rebase master $branch ; fi ; > done && git checkout && make > to keep all branches up-to-date (I must say that I keep branches/tags like >

Re: Error building LO on local system

Hey, On Mon, Dec 26, 2016 at 4:56 PM, Huzaifa Iftikhar wrote: > Hi, > I updated my master branch today with the command ./g pull -r and after > that when I tried to build LibreOffice with the make command it doesn't > build anymore and shows the following error > >

Re: Error building LO on local system

> Earlier the master used to build successfully and I always create a > separate branch for patches and don't make changes on Branch master itself. > > Unless you are an experienced developer who is working on a specific feature where your work in progress will interfere with how LibreOffice works

Error building LO on local system

Hi, I updated my master branch today with the command ./g pull -r and after that when I tried to build LibreOffice with the make command it doesn't build anymore and shows the following error /home/huzaifa/libreoffice/workdir/UnpackedTarball/epoxy/include/epoxy/egl_generated.h:10:29: fatal error:

Re: Error building Visual Studio 2013 project file for LibreOffice on Windows

an install windows and Lode, now I'm getting the "make[1]: *** [cmd] Error 127" when I try to make a project file. Is Lode pulling a new version of make that's causing this error? Has anyone come up with a work-around? -- View this message in context: http://nabble.documentfoundati

Re: Error building LO - strlen was not declared in this scope on fresh Ubuntu 15.04 install

Dunno if I'm arriving too late ;) Anyway: El 21/05/15 a las 05:49, Matteo Campanelli escribió: Hi there, after several minutes of compilation I got the following error(s). Any ideas? [Manual dirty solutions like insert the related #include macros did not work] Since you mention that adding

Error building LO - strlen was not declared in this scope on fresh Ubuntu 15.04 install

Jagobo Aragunde wrote: Since you mention that adding the proper #include did not work and this is a fresh Ubuntu install, I wonder if the package providing string.h is missing. Check the presence of libc6-dev. Apparently libc6-dev was installed. Still in the same situation. Thanks though :)

Error building LO - strlen was not declared in this scope on fresh Ubuntu 15.04 install

Hi there, after several minutes of compilation I got the following error(s). Any ideas? [Manual dirty solutions like insert the related #include macros did not work] // beginning error message from make [SOMEPATH]/include/rtl/ustring.hxx:188:27: error: ‘strlen’ was not declared in this scope In

Error building LO - (LIBO_UDK 4.4 not found)

Hi there, I was building LO on GNU/Linux (on a machine where LO building went smooth until a couple months ago) and I got this message [SOMEPATH is my replacement of a longer path]: DynamicLibraryManagerException: Failed to load dynamic library:

Re: Error building LO - (LIBO_UDK 4.4 not found)

All solved. Sorry for the noise. It was loosely related with ccache and using ccache -C did it. Matteo On Sat, May 16, 2015 at 11:14 AM, Matteo Campanelli matteo.campane...@gmail.com wrote: Hi there, I was building LO on GNU/Linux (on a machine where LO building went smooth until a couple

Re: Error building Visual Studio 2013 project file for LibreOffice on Windows

I haven't tried a different version of make as Juergen suggests, but I confirm that the issue has to do with the fact that make doesn't generate the invariant data that the python script excepts. Specifically, all the # lines that contain the paths and filenames are missing from the output, hence

AW: Error building Visual Studio 2013 project file for LibreOffice on Windows

Hi Jesper, I have the same problem with the Visual Studio Solutions. A lot of thanks too David Ostrovsky he has found a solution for that. The solution is: The make version 4.0 do it wrong, I build ONLY the VS-Solution with make version 3.82 The size is 517.746 Bytes when you have trouble to

Re: Error building Visual Studio 2013 project file for LibreOffice on Windows

Thank you so much, Jürgen! I am looking forward to trying that out. Jesper 2015-02-20 12:48 GMT+01:00 Juergen Funk Mailinglist juergen.funk...@cib.de : Hi Jesper, I have the same problem with the Visual Studio Solutions. A lot of thanks too David Ostrovsky he has found a solution for

Re: Error building Visual Studio 2013 project file for LibreOffice on Windows

Den 17/02/2015 07.34 skrev Tor Lillqvist t...@iki.fi: Not many of us use it, True. I know. :-) And maybe I will have to see it as a do-it-yourself project then, as Noel suggested. I already started debugging the makefile and Python script involved. I will probably learn something new in the

Error building Visual Studio 2013 project file for LibreOffice on Windows

Hi, I just tried building LibreOffice for 32-bit Windows on a 64-bit Windows 7 Home Premium machine using Visual Studio 2013 Community Edition. I have never built LibreOffice before, and I have carefully followed the instructions from

Re: Error building Visual Studio 2013 project file for LibreOffice on Windows

I tried running make with the --debug parameter, and that gave this output, if that is helpful: $ /opt/lo/bin/make --debug vs2013-ide-integration GNU Make 4.0 Built for Windows32 Copyright (C) 1988-2013 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later

Re: Error building Visual Studio 2013 project file for LibreOffice on Windows

I tried running the command LC_MESSAGES=C C:/cygwin/opt/lo/bin/make cmd=C:/cygwin/opt/lo/bin/make -npf Makefile.gbuild all cmd which gave this output of 4359 lines: echo custom cmd ( C:/cygwin/opt/lo/bin/make -npf Makefile.gbuild all ) custom cmd # make[1]: Entering directory

Re: Error building Visual Studio 2013 project file for LibreOffice on Windows

Hi On 2015-02-16 09:40 PM, Jesper Hertel wrote: As instructed, I built directly to the source tree to get Visual Studio integration. The Visual Studio integration is, I'm afraid, largely DIY. Not many of us use it, so if it doesn't work for you, and you can't figure it out yourself,

Re: Error building Visual Studio 2013 project file for LibreOffice on Windows

Not many of us use it, True. However, that doesn't mean you can't use Visual Studio for debugging, it is very simple to just run VS and start a program and debug from it, and it will load the correct source files, etc. In more detail, what works fine is: Start the LibreOffice you just

error building cairotextrenderer.cxx on xstreamos/illumos

Hi, going on building, got these errors on cairotextrenderer.cxx: /sources/sonicle/xstream-desktop-gate/components/libreoffice/libreoffice/libreoffice-4.4.0.2/vcl/unx/generic/gdi/cairotextrender.cxx: In member function 'bool CairoTextRender::setFont(const FontSelectPattern*, int)':

Re: error building vclxbitmap.cxx on xstreamos/illumos

On 01/22/2015 10:35 PM, Richard PALO wrote: Okay, but by observation it does seem to be a rather overloaded term though, missing a prefix or namespace.. at least the one in include/vcl/window.hxx has been changed into a scoped enumeration on master

[Solved]: error building fastserializer on xstreamos/illumos

;) -- Da: Stephan Bergmann A: libreoffice@lists.freedesktop.org Data: 21 gennaio 2015 11.40.30 CET Oggetto: Re: error building fastserializer on xstreamos/illumos On 01/20/2015 06:26 PM, Gabriele Bulfon wrote: Our boost

Re: error building vclxbitmap.cxx on xstreamos/illumos

On 01/22/2015 01:45 PM, Gabriele Bulfon wrote: Hi, next error, right in the middle of an enum declaration...: [build CXX] toolkit/source/awt/vclxbitmap.cxx In file included from

error building vclxbitmap.cxx on xstreamos/illumos

Hi, next error, right in the middle of an enum declaration...: [build CXX] toolkit/source/awt/vclxbitmap.cxx In file included from /sources/sonicle/xstream-desktop-gate/components/libreoffice/libreoffice/libreoffice-4.4.0.2/include/vcl/ctrl.hxx:26:0, from

Re: error building vclxbitmap.cxx on xstreamos/illumos

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Le 22/01/15 19:11, Markus Mohrhard a écrit : Yah, but... shouldn't the enum be in a namespace in the first place? Or are there c-only source files looking for it... That doesn't matter here as it is a define and therefore the preprocessor

Re: error building vclxbitmap.cxx on xstreamos/illumos

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Le 22/01/15 15:20, Stephan Bergmann a écrit : If line 245 of include/vcl/window.hxx reads TRANSPARENT= 12, for you, then most likely you happen to include some definition of a macro named TRANSPARENT.

Re: error building vclxbitmap.cxx on xstreamos/illumos

Hey, On Thu, Jan 22, 2015 at 6:53 PM, Richard PALO rich...@netbsd.org wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Le 22/01/15 18:35, Gabriele Bulfon a écrit : yes, I added a patch to add this just before the enum, and it goes on : #ifdef TRANSPARENT # undef TRANSPARENT

Re: error building vclxbitmap.cxx on xstreamos/illumos

: 22 gennaio 2015 18.12.00 CET Oggetto: Re: error building vclxbitmap.cxx on xstreamos/illumos -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Le 22/01/15 15:20, Stephan Bergmann a écrit : If line 245 of include/vcl/window.hxx reads TRANSPARENT= 12, for you, then most likely you happen

Re: error building vclxbitmap.cxx on xstreamos/illumos

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Le 22/01/15 18:35, Gabriele Bulfon a écrit : yes, I added a patch to add this just before the enum, and it goes on : #ifdef TRANSPARENT # undef TRANSPARENT #endif going on ;) thanks! Yah, but... shouldn't the enum be in a namespace in

Re: error building fastserializer on xstreamos/illumos

On 01/20/2015 06:26 PM, Gabriele Bulfon wrote: Our boost is 1.49.0, I would rather let it use system one, instead of having another one around. What is the minimum required? LO's configure.ac checks for AX_BOOST_BASE(1.47) and then does some AC_CHECK_HEADER and more specific

Re: error building fastserializer on xstreamos/illumos

On 20.01.2015 17:49, Gabriele Bulfon wrote: Back here again, going on building :) next error is a Boost error on fastserializer, a lot of errors actually:

Re: error building fastserializer on xstreamos/illumos

18.08.14 CET Oggetto: Re: error building fastserializer on xstreamos/illumos On 20.01.2015 17:49, Gabriele Bulfon wrote: Back here again, going on building :) next error is a Boost error on fastserializer, a lot of errors actually: /sources/sonicle/xstream-desktop-gate/components/libreoffice

error building fastserializer on xstreamos/illumos

Back here again, going on building :) next error is a Boost error on fastserializer, a lot of errors actually: ... [build CXX] sax/source/tools/fastserializer.cxx S=/sources/sonicle/xstream-desktop-gate/components/libreoffice/libreoffice/libreoffice-4.4.0.2 I=$S/instdir W=$S/workdir mkdir -p

Re: error building fastserializer on xstreamos/illumos

On 01/20/2015 05:49 PM, Gabriele Bulfon wrote: [build CXX] sax/source/tools/fastserializer.cxx S=/sources/sonicle/xstream-desktop-gate/components/libreoffice/libreoffice/libreoffice-4.4.0.2 I=$S/instdir W=$S/workdir mkdir -p $W/CxxObject/sax/source/tools/ $W/Dep/CxxObject/sax/source/tools/

Re: error building fastserializer on xstreamos/illumos

? -- Da: Michael Stahl A: libreoffice@lists.freedesktop.org Data: 20 gennaio 2015 18.08.14 CET Oggetto: Re: error building fastserializer on xstreamos/illumos On 20.01.2015 17:49, Gabriele Bulfon wrote: Back here again, going on building :) next error

Re: error building fastserializer on xstreamos/illumos

fastserializer was not built at all before? -- Da: Michael Stahl mst...@redhat.com A: libreoffice@lists.freedesktop.org Data: 20 gennaio 2015 18.08.14 CET Oggetto: Re: error building fastserializer on xstreamos/illumos

Re: Error building sc on XStreamOS/illumos

Yoshida Cc: libreoffice-dev Data: 18 luglio 2013 16.23.49 CEST Oggetto: Re: Error building sc on XStreamOS/illumos Great! Worked, and I had also to patch this: --- libreoffice-4.1.0.1/sc/source/core/tool/scmatrix.cxxThu Jul 18 16:19:54 2013 +++ libreoffice-4.1.0.1/sc/source/core/tool

Error building sc on XStreamOS/illumos

Hi, building went on after setup_native, and I got an error while building sc: In file included from /sources/userlands/xstream-userland-gate/components/libreoffice/libreoffice-4.1.0.1/sc/inc/column.hxx:28, from

Re: Error building sc on XStreamOS/illumos

Hi Gabriele, On Thursday, 2013-07-18 09:12:02 +0200, Gabriele Bulfon wrote: building went on after setup_native, and I got an error while building sc: /sources/userlands/xstream-userland-gate/components/libreoffice/libreoffice-4.1.0.1/sc/inc/mtvelements.hxx:66: error: wrong number of

Re: Error building sc on XStreamOS/illumos

Hi Gabriele, On Thursday, 2013-07-18 14:17:41 +0200, Eike Rathke wrote: This looks like your system mdds is outdated; argh.. forget it, ok, this time it was the other way around.. see Kohei's mail. Eike -- LibreOffice Calc developer. Number formatter stricken i18n transpositionizer. GPG

Re: Error building sc on XStreamOS/illumos

: Error building sc on XStreamOS/illumos On 07/18/2013 03:12 AM, Gabriele Bulfon wrote: Hi, building went on after setup_native, and I got an error while building sc: In file included from /sources/userlands/xstream-userland-gate/components/libreoffice/libreoffice-4.1.0.1/sc/inc/column.hxx:28, from

Re: Error building with clang

On Saturday 05 of January 2013, Marc-André Laverdière wrote: Miklos was right - the newer version changes everything. I just finished building, and the only option I used was to enable the plugins. I'll put together a small blog entry about this, in case others want to try the same. Should I

Error building with clang

Hi, I am building with clang. I ran make clean and even wiped my ccache cache. I run into this problem: /home/marc-andre/lo/core/solver/unxlngx6.pro/inc/external/boost/uuid/seed_rng.hpp:143:61: note: override this message by inserting an explicit cast unsigned int rn[] = {

Re: Error building with clang

Hi Marc-André, On Fri, Jan 04, 2013 at 03:16:46PM +0530, Marc-André Laverdière marcandre.laverdi...@gmail.com wrote: Ubuntu clang version 3.0-6ubuntu3 (tags/RELEASE_30/final) (based on LLVM 3.0) https://wiki.documentfoundation.org/Development/Building_LibreOffice_with_Clang#Setup Says that

Re: Error building with clang

On Friday 04 of January 2013, Marc-André Laverdière wrote: Hi, I am building with clang. I ran make clean and even wiped my ccache cache. I run into this problem: /home/marc-andre/lo/core/solver/unxlngx6.pro/inc/external/boost/uuid/seed_r ng.hpp:143:61: note: override this message by

Re: Error building with clang

Miklos was right - the newer version changes everything. I just finished building, and the only option I used was to enable the plugins. I'll put together a small blog entry about this, in case others want to try the same. Should I update the wiki too? Marc-André LAVERDIÈRE Perseverance must

Error building on windows XP SP3 using cygwin

I guys, I'm having this error building 3.6.2 on Windows (using cygwin): ### [ build CUT ] filter_tiff_test S=C:/libre362 O=$S/solver/wntmsci12.pro W=$S/workdir/wntmsci12.pro mkdir -p $W

Re: % error building instsetoo_native...

On 30/05/12 21:52, ORTIZ MARTINEZ JOSE ASUNCION wrote: ... analyzing files ... ERROR: The following files could not be found: ERROR: File not found: dict-af.oxt ERROR: File not found: dict-an.oxt ERROR: File not found: dict-ar.oxt ERROR: File not found: dict-be.oxt ERROR: File not

Re: % error building instsetoo_native...

Hi Jose, On Wed, 2012-05-30 at 14:52 -0500, ORTIZ MARTINEZ JOSE ASUNCION wrote: My Name is Jose Ortiz . I am a programmer from the ‘ Instituto Nacional de Estadistica y Geografia ( Mexico)’ . Welcome to LibreOffice ! :-) Actually, I’m building libre office core but …. To

% error building instsetoo_native...

Hi Everbody : My Name is Jose Ortiz . I am a programmer from the ' Instituto Nacional de Estadistica y Geografia ( Mexico)' . In this moment, we are trying to change from Microsoft Office products to Libre Office. Actually, I'm building libre office core but I have the

% error building module odk...

Hi Everbody ¡! I have the next error building module odk : = Building module odk = Entering /cygdrive/c/libo/odk/inc :: : : C:/software/cygwin/bin/perl ../../util/check.pl ../../wntmsci12.pro/bin/odkcommon windows .exe

[Libreoffice] R: R: R: Fatal error building Windows release (Cygwin)

Are you using VS2008 Express Edition ? I'm working with: ___ Microsoft Visual Studio 2008 Version 9.0.30729.4462 QFE Microsoft .NET Framework Version 3.5 SP1 Installed Edition: Enterprise Microsoft Visual Basic 2008

Re: [Libreoffice] R: R: R: Fatal error building Windows release (Cygwin)

Microsoft Visual Studio 2008 Version 9.0.30729.1 SP Microsoft .NET Framework Version 3.5 SP1 Installed Edition: VC Express On 2012-02-02 10:04, walter wrote: Are you using VS2008 Express Edition ? I'm working with: ___

[Libreoffice] R: R: R: Fatal error building Windows release (Cygwin)

I'm trying to rebuild from start. How do you clone / checkout libreoffice locally ? Today I have used the new statement: $ git checkout -b libreoffice-3-5 origin/libreoffice-3-5 Regards Walter ___ LibreOffice mailing list

Re: [Libreoffice] R: R: Fatal error building Windows release (Cygwin)

Hi Noel Could you confirm you needed to update Env.host.sh before launching it ? At least *I* needed, since CC=/cygdrive/c/Program Files (x86)/MICROS~2.0/VC/bin/cl.exe is not the kind of path make likes (spaces parens). TY Mathias M Le Wed, 01 Feb 2012 17:22:58 +0100, Noel Grandin

Re: [Libreoffice] R: R: Fatal error building Windows release (Cygwin)

I'm building from master, and I didn't need to update Env.host.sh In my Env.host.sh, the CC line looks like: CC=/cygdrive/c/PROGRA~2/MICROS~1.0/VC/bin/cl.exe On 2012-02-02 01:33, Mat M wrote: Hi Noel Could you confirm you needed to update Env.host.sh before launching it ? At least *I*

[Libreoffice] Fatal error building Windows release (Cygwin)

I followed all the instructions in wiki.documentfoundation.org/Development/Native_Build and in wiki.documentfoundation.org/Development/Windows_Build_Dependencies but I’m unable to build the release. Full logs (including getting the source) at pastebin.com/u/walterLO Release libreoffice

Re: [Libreoffice] Fatal error building Windows release (Cygwin)

looks like it's failing in the xmlreader module (part6 of your pastebin logs), but I don't know why. try doing this: source ./Env.Host.sh cd xmlreader build On 2012-01-31 14:59, walter wrote: I followed all the instructions in wiki.documentfoundation.org/Development/Native_Build and in

Re: [Libreoffice] R: Fatal error building Windows release (Cygwin)

yeah, the gbuild code that figures out the INCLUDE path is obviously a little wonky. As this point all I can suggest is doing: cd xmlreader rm -Rf wntmsci12.pro build Sometimes that sorts it out. On 2012-01-31 15:31, walter wrote: The problem is Cannot open include file: 'sal/config.h'

[Libreoffice] R: R: Fatal error building Windows release (Cygwin)

A simple question. How can you compile The MASTER Win-x86_7-MinGW without any error ? Which environment is used ? Regards Walter ___ LibreOffice mailing list LibreOffice@lists.freedesktop.org

[Libreoffice] R: R: Fatal error building Windows release (Cygwin)

The suggestion doesn't solve the problem. Regards Walter cd xmlreader rm -Rf wntmsci12.pro build ___ LibreOffice mailing list LibreOffice@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/libreoffice

[Libreoffice] Fatal error building Windows release - ( Cygwin )

It's the first time I try to build LibreOffice. Can anyone help me ? walter ___ LibreOffice mailing list LibreOffice@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/libreoffice

Re: [Libreoffice] Fatal error building Windows release - ( Cygwin )

Hi Walter, Il 30/01/2012 11:04, walter ha scritto: It's the first time I try to build LibreOffice. Can anyone help me ? You may want to report what version are you trying to compile and the exact error as a starting point :) cheers, -- Riccardo Magliocchetti

[Libreoffice] Fatal error building Windows release - ( Cygwin )

Hi Riccardo, I'm building Version 3.5 I have attached a zip (with logs), but it disappeared. How can I send you a complete log. cheers Walter ___ LibreOffice mailing list LibreOffice@lists.freedesktop.org

[Libreoffice] R: Fatal error building Windows release - ( Cygwin )

Hi Korrawit, Sorry, but I'm the classic windows desktop programmer, I have to change my mind one more time, sigh ! $ git show commit 9abb0b6bbe2de65988065f78354ccf5ebde4a7ae Error Log (last lines) pastebin.com/u/walterLO Cheers walter ___

Re: [Libreoffice] R: Fatal error building Windows release - ( Cygwin )

Hi Walter, walter píše v Po 30. 01. 2012 v 12:24 +0100: $ git show commit 9abb0b6bbe2de65988065f78354ccf5ebde4a7ae Error Log (last lines) pastebin.com/u/walterLO The log looks like your build got terribly confused somehow - missing sal/config.h etc.; I'd do 'make clean', and build from

Re: [Libreoffice] error building translations

Le 02/05/2011 22:12, Jean-Baptiste Faure a écrit : Le 02/05/2011 13:58, Jean-Baptiste Faure a écrit : Le 01/05/2011 20:27, Júlio Hoffimann a écrit : Hi Jean, This problem was solved by KAMI as you can see here: http://nabble.documentfoundation.org/po2oo-skipsource-support-td2802247.html

Re: [Libreoffice] error building translations

Le 02/05/2011 13:58, Jean-Baptiste Faure a écrit : Le 01/05/2011 20:27, Júlio Hoffimann a écrit : Hi Jean, This problem was solved by KAMI as you can see here: http://nabble.documentfoundation.org/po2oo-skipsource-support-td2802247.html

[Libreoffice] error building translations

Hi, I try to build Libo 3.4 in French and I get an error in translations module. Error message is : po2oo: error: no such option: --skipsource My version of po2oo is 1.5.3 What can I do to fix this problem ? Best regards. JBF -- Seuls des formats ouverts peuvent assurer la pérennité de vos

Re: [Libreoffice] error building translations

Hi Jean, This problem was solved by KAMI as you can see here: http://nabble.documentfoundation.org/po2oo-skipsource-support-td2802247.html http://nabble.documentfoundation.org/po2oo-skipsource-support-td2802247.html#a2802983Try to update your repo and build again. :-) Regards, Júlio. 2011/5/1

[Libreoffice] Error building smoketestoo_native

Hello, I'm trying to build this module with valgrind ( export VALGRIND=memcheck ) and I get an error in cpptest. You can find the debug's output here: http://dl.dropbox.com/u/1274885/debugoutput ___ LibreOffice mailing list

Re: [Libreoffice] Error building smoketestoo_native

It also fails without valgrind. This time I get: Backtrace: [42] /home/xisco/libo/solver/300/ unxlngi6.pro/installation/opt/program/soffice.bin: ???+0xda1 Exited with code '-1' officeconnection.cxx:140:Assertion Test name: N12_GLOBAL__N_14TestE::test setUp() failed - equality assertion failed -

[Libreoffice] Error Building

Just done a pull and am now getting a build error: Entering .../build/rawbuild/svtools/util Making:svten-US.res Compiling: rsc_svt f268: Error: The image(s) lxh03124 lxh03125 lxh03131 lxh03132 lxh03134 lxh03135 lxh03136 lxh03137 lxh03138 lxh03139 lxh03140 lxh03141 lxh03142 lxh03145 lxh03150

Re: [Libreoffice] Error Building

On Tue, 16 Nov 2010 10:06:38 +, Nigel Hawkins n.hawk...@gmx.com wrote: Just done a pull and am now getting a build error: Entering .../build/rawbuild/svtools/util Making:svten-US.res Compiling: rsc_svt f268: Error: The image(s) lxh03124 lxh03125 lxh03131 lxh03132 lxh03134 ... The

Re: [Libreoffice] Error Building

On Tue, 16 Nov 2010 11:28:28 +0100, Sebastian Spaeth sebast...@sspaeth.de wrote: On Tue, 16 Nov 2010 10:06:38 +, Nigel Hawkins n.hawk...@gmx.com wrote: Just done a pull and am now getting a build error: Entering .../build/rawbuild/svtools/util Making:svten-US.res Compiling:

Re: [Libreoffice] Error Building

On Tue, 2010-11-16 at 12:34 +0100, Sebastian Spaeth wrote: Let me correct myself, I still get this failure. It suffices to go to svtools/util and issue dmake. But the name of the icons doesn't occur at all in svtools (or any other repo for that matter). So I have no clue where that is coming

Re: [Libreoffice] Error Building, vcl segmentation fault

Hi, I read on the Linux game publishing blog something about forcing gcc to resolve of the link library location, unfortunate the blog is down for the time being. However looking at gcc manual, it could have been the -Bprefix option. Hope that it might help. The Best René

Re: [Libreoffice] Error Building, vcl segmentation fault

A slight correction, a bit of further searching and I found the correct linker option, namely ld's rpath Used to force the search path of the dynamic linking (from gcc: $ gcc -Wl,-rpath=path to the local port of the stl ) On Oct 15, 2010 1:04 PM, René Kjellerup rk.katana.st...@gmail.com

Re: [Libreoffice] Error Building, vcl segmentation fault

Hi Rene, On Wed, 2010-10-13 at 19:54 +0200, Rene Engelhard wrote: On Tue, Oct 12, 2010 at 12:13:15PM +0200, Lubos Lunak wrote: On Tuesday 12 of October 2010, Michael Meeks wrote: Having said that - it looks like this may be some horrendous compatibility problem between the internal

Re: [Libreoffice] Error Building, vcl segmentation fault

On Thu, 2010-10-14 at 10:04 +0100, Michael Meeks wrote: Nasty - so we could be in the position of choosing between KDE integration, and extension/plugin compatibility ? If there *is* something in the KDE headers which replies on the native STL which is triggering this, which I'm not

Re: [Libreoffice] Error Building, vcl segmentation fault

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello, On 14/10/2010 11:04, Michael Meeks wrote: ABI compatibility to OOo C++ extensions is one. (Though happily only for i386 on Linux) Nasty - so we could be in the position of choosing between KDE integration, and extension/plugin

Re: [Libreoffice] Error Building, vcl segmentation fault

On Wed, 2010-10-13 at 22:30 +0200, julien wrote: Thread 1 (Thread 0xb7d276d0 (LWP 15195)): #0 0xb68061db in _STL::locale::locale() () from /usr/lib/libstlport_gcc.so.4.6 #1 0xb67d1414 in _STL::ios_base::ios_base() () from /usr/lib/libstlport_gcc.so.4.6 #2 0xb67e3a41 in

  1   2   >