Hi again,
I am getting a cyclic dependency error with code that uses change staff and
trillSpan. Here is as minimal an example as I could create:
%%%
\version "2.24.3"
\language "english"
staffUp = \change Staff = "upper"
staffDown = \change Staff = "low
Le mardi 07 novembre 2023 à 16:48 -0500, David Zelinsky a écrit :
> Though I am curious whether this was just an accident of implementation
> and would be easy to change, or if there is a more structural reason.
It is purely a bug. I've just
found https://gitlab.com/lilypond/lilypond/-/issues/188
Jean Abou Samra writes:
> Le mardi 07 novembre 2023 à 00:55 -0500, David Zelinsky a écrit :
>> Is there a way to change the spacing between staves (single-staff
>> systems) in one score, in a document with multiple scores, without
>> introducing a page break?
>
> Unfortunately, the answer is curr
:
Sent: 07/11/2023 5:55
Subject: change staff-staff-spacing in a single score?
Is there a way to change the spacing between staves (single-staff
systems) in one score, in a document with multiple scores, without
introducing a page break? The only way I've found in the manual to
chang
Le mardi 07 novembre 2023 à 00:55 -0500, David Zelinsky a écrit :
> Is there a way to change the spacing between staves (single-staff
> systems) in one score, in a document with multiple scores, without
> introducing a page break?
Unfortunately, the answer is currently no.
Best,
Jean
signature
Is there a way to change the spacing between staves (single-staff
systems) in one score, in a document with multiple scores, without
introducing a page break? The only way I've found in the manual to
change the spacing of systems (as opposed to staves within a system) is
in a \paper block, and the
On Fri, Feb 17, 2023 at 1:04 AM Thomas Morley
wrote:
>
> Add
> \override Script.avoid-slur = #'inside
>
> Cheers,
> Harm
>
That works great, thanks!
--
Knute Snortum
.25.1"
>
> staffUp = \change Staff = "upper"
> staffDown = \change Staff = "lower"
>
> rightHand = {
> \new Voice {
> \voiceOne \staffDown g16->-1( \staffUp c' c' \staffDown g)
> }
> }
>
> leftHand = { \new Voice { \
Subject: Programming error with change staff
I have run into a situation where LilyPond produces a programming error. It
involves changing staff, voice one, accent fingering and avoid-slur. It's best
to just look at the MWE:
\version "2.25.1"
staffUp = \change Staff = &q
I have run into a situation where LilyPond produces a programming error.
It involves changing staff, voice one, accent fingering and avoid-slur.
It's best to just look at the MWE:
\version "2.25.1"
staffUp = \change Staff = "upper"
staffDown = \change Staff = "lowe
tsang
Sent: Monday, August 29, 2022 3:51 PM
To: lilypond-user
Subject: Fwd: change Staff =
Sorry forgot to include the .ly file.
-- Forwarded message -
From: ming tsang mailto:ming.tsan...@gmail.com> >
Date: Mon, Aug 29, 2022 at 4:18 PM
Subject: change Staff =
To: li
;> I, obviously, do not understand yet how to do this, even after
> >>
> >> reading the pertinent section in the Notation Reference.
> >>
> >> My attempt to engrave the first three bars of the harp score of Swan
> >>
> >> Lake fails wi
ously, do not understand yet how to do this, even after
>> reading the pertinent section in the Notation Reference.
>>
>> My attempt to engrave the first three bars of the harp score of Swan
>> Lake fails with the following:
>>
>> Swan_Lake.ly:40:3: warning: c
.
>
> My attempt to engrave the first three bars of the harp score of Swan
> Lake fails with the following:
>
> Swan_Lake.ly:40:3: warning: cannot find context to change to: Staff = RH
>
> \change Staff = "RH"
> Swan_Lake.ly:22:3: warning: cannot find context to c
Kenneth Wolcott
> wrote:
> >
> > Hi;
> >
> > Starting a new email thread regarding my difficulty in understanding
> > how to use the Lilypond \change Staff feature...
> >
> > I'm trying to create a two-octave ascending C Major scale using the
>
Ah! I created more than one bar of notes, therefore I have to have
more than one bar of spacer notes. Doh!
On Sun, Jul 31, 2022 at 5:35 PM Kenneth Wolcott
wrote:
>
> Hi;
>
> Starting a new email thread regarding my difficulty in understanding
> how to use the Lilypond \chang
Hi;
Starting a new email thread regarding my difficulty in understanding
how to use the Lilypond \change Staff feature...
I'm trying to create a two-octave ascending C Major scale using the
change Staff example in NR.
https://lilypond.org/doc/v2.22/Documentation/notation-big-page
Thank you, Mark. I will start a new email thread on this topic
starting with a more basic \change Staff query.
On Sat, Jul 30, 2022 at 7:02 PM Mark Stephen Mrotek
wrote:
>
> Kenneth,
>
> If you want, send your code to me and I shall try to achieve what you want
> with an explan
how to use "\change Staff"; don't get it yet, obviously
Hi Mark;
Thank you for the help.
I'm still having trouble wrapping my head around this.
I think that the problem (in general) with my being able to apply examples
from the documentation to my engraving attempts is
2022 at 3:04 PM Mark Stephen Mrotek
wrote:
>
> Kenneth,
>
> Not dense at all.
> Change staff works within a single voice. You split it between rh and lh.
> Might suggest you use "upper" and "lower" for staff designation if you use rh
> and lh as variable
Kenneth,
Not dense at all.
Change staff works within a single voice. You split it between rh and lh. Might
suggest you use "upper" and "lower" for staff designation if you use rh and lh
as variable names.
Assuming you start in "lower" with lh.
Then
\tuplet 3
mianlegassick wrote:
>
> fiddly one this
>
> \version "2.21.7"
>
> \layout {
> \context {
> \PianoStaff
> \consists #Span_stem_engraver
> }
> }
>
> rhmusic = {
> \time 3/4
> \key e \major
> \change Staff = "lower"
> \stemUp
> 8[ r16
Hi Knute,
Am 07.11.20 um 20:02 schrieb Knute Snortum:
Here's a better MWE with my try using voices in the left hand:
%%% Start
\version "2.20.0"
\language "english"
staffUp = \change Staff = "upper"
staffDown = \change Staff = "lower"
rh
4
\key e \major
\change Staff = "lower"
\stemUp
8[ r16
\change Staff = "upper"
e'16]
}
lhmusic = {
\key e \major
\clef "bass"
<<
{
\once \omit Stem
\once \omit Beam
\slurDown
gis8.( \crossStaff {b16)}
}
\\
{
e,4
}
}
\new PianoStaff {
<<
\new Staff
fiddly one this
\version "2.21.7"
\layout {
\context {
\PianoStaff
\consists #Span_stem_engraver
}
}
rhmusic = {
\time 3/4
\key e \major
\change Staff = "lower"
\stemUp
8[ r16
\change Staff = "upper"
e'16]
}
lhmusic = {
\key e \major
\clef "bass
%%% Start
\version "2.21.7"
\layout { \context { \PianoStaff \consists #Span_stem_engraver } }
rhmusic = {
\time 3/4 \key e \major
\change Staff = "lower"
\stemUp 8[( r16 % added start paren
\change Staff = "upper" e'16]) % added end paren
}
lhmusic = {
\key e
That looks good! Thanks!
--
Knute Snortum
On Sat, Nov 7, 2020 at 11:09 AM damianlegassick wrote:
>
> Try this for starters
>
> \version "2.21.7"
>
> \layout { \context { \PianoStaff \consists #Span_stem_engraver } }
>
> rhmusic = {
> time 3/4 \key e \majo
Try this for starters
\version "2.21.7"
\layout { \context { \PianoStaff \consists #Span_stem_engraver } }
rhmusic = {
time 3/4 \key e \major
\change Staff = "lower"
\stemUp 8[ r16
\change Staff = "upper" e'16]
}
lhmusic = {
\key e \major
\clef "bas
Here's a better MWE with my try using voices in the left hand:
%%% Start
\version "2.20.0"
\language "english"
staffUp = \change Staff = "upper"
staffDown = \change Staff = "lower"
rh = \relative c' {
s8. \crossStaff e16
}
lh = \relat
I have a tricky measure in the Chopin Mazurka I'm working on. The
notes need to be on the lower staff (from the right hand) and the last
chord is cross staff. I'd like to be able to do something like
this...
%%% Start
\version "2.20.0"
staffUp = \change Staff = "u
On 2020-09-30 1:09 pm, Philippe Auclair wrote:
Oups... Sorry, here are the pdf files.
In the following example, in the piano left staff music, \clef "bass"
is BEFORE \dynamicUp : the score goes completely wild ! (1st attached
pdf).
If \clef "bass" is AFTER \dynamicUp, the score is correct (2nd p
;, piano left staff becomes correct
\version "2.20.0"
\include "italiano.ly"
PianoRightMusic = \relative do {
\key sib \major
\time 2/4
\change Staff = "PianoLeft" \voiceOne fa8^.^^[
\change Staff = "PianoRight" \oneVoice
r16 ^^] 4 ~
rect
\version "2.20.0"
\include "italiano.ly"
PianoRightMusic = \relative do {
\key sib \major
\time 2/4
\change Staff = "PianoLeft" \voiceOne fa8^.^^[
\change Staff = "PianoRight" \oneVoice
r16 ^^] 4 ~
8[
I am using `\change Staff` to manually switch between the staves of a
PianoStaff, as per.[1]
Above the piano staff is a voice part with lyrics. The beams of the
piano part collide with the lyrics of the voice part. If I do not use
`\change Staff` then the collision does not occur.
%%% begin MWE
On 2/4/19 10:18 AM, Aaron Hill wrote:
I overlooked \cueClefUnset so that's the better option.
For the grob, the Internals reference is your friend: CueEndClef
Thanks! I really need to get more familiar with the internals
reference. One of these days in my copious free time.
David, thanks
On 2019-02-04 6:47 am, Christopher R. Maden wrote:
On 2/4/19 6:03 AM, Aaron Hill wrote:
Note in this case I changed the CueClef font-size to match the reduced
size of a non-cue clef when it appears within a line.
That looks great, thanks! The \cueClefUnset bass clef still looks
tiny, and if I
On 2/4/19 6:03 AM, Aaron Hill wrote:
Note in this case I changed the CueClef font-size to match the reduced
size of a non-cue clef when it appears within a line.
That looks great, thanks! The \cueClefUnset bass clef still looks tiny,
and if I use \cueClef to switch back to bass, it shows up i
"Christopher R. Maden" writes:
> This is probably a FAQ, but I can’t find the right combination of
> search terms to tease it from the ether...
>
> I want a piano staff, with the left hand to start with bass clef, but
> then immediately switch to treble clef after the time signature.
>
> Mnon-WE
On 2019-02-03 8:44 pm, Christopher R. Maden wrote:
On 2/3/19 9:43 PM, Aaron Hill wrote:
Does \cueClef help?
It does... though then when I \clef bass back again it’s ignored. I
can use \cueClefUnset...
Thanks, this is a great workaround. I suspect there is a better (more
properly LilyPondish
HI Chris,
That makes sense. I also like to preserve the composer's own notation where
possible. And as said, it's not actually wrong! Good old Sousa!
Andrew
On Mon, 4 Feb 2019 at 16:43, Christopher R. Maden wrote:
>
> I’m transcribing Sousa’s “A Typical Tune of Zanzibar,”[*] and I’m trying
>
On 2/4/19 12:36 AM, Andrew Bernard wrote:
This comes up reasonably often. May I ask why you don't simply start
the piece with the treble clef? If you immediately change to treble,
what is the point of having the bass clef at this point? It's a
musical decision up to you, but it always strikes me
Hi Christopher,
This comes up reasonably often. May I ask why you don't simply start the
piece with the treble clef? If you immediately change to treble, what is
the point of having the bass clef at this point? It's a musical decision up
to you, but it always strikes me as a bit unnecessary. Any p
On 2/3/19 9:43 PM, Aaron Hill wrote:
Does \cueClef help?
It does... though then when I \clef bass back again it’s ignored. I can
use \cueClefUnset...
Thanks, this is a great workaround. I suspect there is a better (more
properly LilyPondish) answer, but this is more than adequate for now.
On 2019-02-03 6:43 pm, Aaron Hill wrote:
On 2019-02-03 6:33 pm, Christopher R. Maden wrote:
This is probably a FAQ, but I can’t find the right combination of
search terms to tease it from the ether...
I want a piano staff, with the left hand to start with bass clef, but
then immediately switch
On 2019-02-03 6:33 pm, Christopher R. Maden wrote:
This is probably a FAQ, but I can’t find the right combination of
search terms to tease it from the ether...
I want a piano staff, with the left hand to start with bass clef, but
then immediately switch to treble clef after the time signature.
This is probably a FAQ, but I can’t find the right combination of search
terms to tease it from the ether...
I want a piano staff, with the left hand to start with bass clef, but
then immediately switch to treble clef after the time signature.
Mnon-WE is attached. Probably this involves monk
score {
\partcombineApart
\oneVoice
\dynamicDown
}
R1 |
\resetRelativeOctave c
c4 d e f |
g4 f e d |
R1 |
\tag #'score \partcombineUnisono
\resetRelativeOctave c
c4 d e f |
g4 f e d |
}
bsnII = \relative {
\tag #'score {
\change Staff = "
Absolutely agree :) Consider my last code a scheme exercise...
On 28 January 2017 at 09:33, Helge Kruse wrote:
> Am 26.01.2017 um 10:51 schrieb Gianmaria Lari:
> > ... and this is one more way to do the change staff using a scheme
> function
> > that toggle bet
Am 26.01.2017 um 10:51 schrieb Gianmaria Lari:
> ... and this is one more way to do the change staff using a scheme function
> that toggle between the two staff.
>
...
> Not sure it can be more useful than the other ones. Also have no idea if
> this logic should be written differen
... and this is one more way to do the change staff using a scheme function
that toggle between the two staff.
\version "2.19.54"
#(define staffToggle #f)
cs= #(define-music-function (parser location) ;cs = Change Staff
()
(begin
(set! staffT
Thank you, Malte and Noeck, it works perfectly.
I post here another solution, that is interesting because it doesn't use
scheme and more easy to understand.
\version "2.19.54"
csl = { \change Staff = "left" }
csr = { \change Staff = "right" }
right = \fixed c
Am 25.01.2017 um 14:38 schrieb SoundsFromSound:
> Do you know how to fix them?
Hi,
you need staves named "right" and "left" for this to work:
\version "2.19.50"
l =
#(define-music-function (music) (ly:music?)
#{
\change Staff = "left&qu
Malte Meyn-3 wrote
> Am 25.01.2017 um 11:55 schrieb Gianmaria Lari:
>> - Is there a simpler way to write this source code avoiding all these
>> change staff?
>
> You could use a simple music function:
>
> l =
> #(define-music-function (music) (ly:music?)
>
Am 25.01.2017 um 11:55 schrieb Gianmaria Lari:
> - Is there a simpler way to write this source code avoiding all these
> change staff?
You could use a simple music function:
l =
#(define-music-function (music) (ly:music?)
#{
\change Staff = "left"
#music
- Is there a simpler way to write this source code avoiding all these
change staff?
- Is it correct writing the left hand using s2 etc. etc.?
Thank you, g.
\version "2.19.54"
right = \fixed c' {
\clef treble
\time 2/4
g8-4 \change Staff = "left" g_4 \change St
On Tue 10 May 2016 at 13:21:36 (+0200), Davide Liessi wrote:
> In the following code, the two short instrument names "A" and "B" of
> the second system are put one on top of the other (as I expected).
> I can solve the collision manually, e.g. with something similar to the
> three commented lines.
Hi all.
In the following code, the two short instrument names "A" and "B" of
the second system are put one on top of the other (as I expected).
I can solve the collision manually, e.g. with something similar to the
three commented lines.
Is there a way to automatically change the short instrument
> right = \relative c'' {
>> R1
> If you comment \ottava #1 the following warning is printed:
> warning: this Voice needs a \voiceXx or \shiftXx setting
> <
>c' gis'>1
> No idea why it is omitted with \ottava #1
>
>> \ottav
iceXx or \shiftXx setting
<
c' gis'>1
No idea why it is omitted with \ottava #1
> \ottava #1
> 1
> \ottava #0 |
> }
>
> left = \relative c' {
> \clef bass
> R1
> \change Staff = "right"
% Following the warning you sho
utput attached:
\version "2.19.16"
right = \relative c'' {
R1
\ottava #1
1
\ottava #0 |
}
left = \relative c' {
\clef bass
R1
\change Staff = "right"
1
\change Staff = "left" |
}
\score {
\new PianoStaff <<
\new St
AbrahamThank you. It works on v2.19.15 as well.Immanuel,Ming
On Friday, December 19, 2014 11:01 AM, "lilypond-user-requ...@gnu.org"
wrote:
1. Re:\change staff (tisimst)
Message: 1
Date: Fri, 19 Dec 2014 07:33:36 -0700 (MST)
From: tisimst
To: lilypond-user@gnu.org
S
;english"
right = {
\time 4/4 \key ef\major
r4 af16 c' ef' af' 8 ef' ef' |%m52
1 |%m53
s2. \bar"|." %m54
}
left = {
\time 4/4 \key ef\major
af,8 ef ~ ef4 g,4 f |
ef,16 bf, ef f
\once \override Beam.positions = #&
Hi,
Since you are naming your staves as "right" and "left" in the \score block,
then you must use \change Staff = "right" or \change Staff = "left" when
changing staves, instead of \change Staff = up. So on line 23 simply
exchange the word up for &q
lypond.1069038.n5.nabble.com/possible-bug-change-Staff-and-beam-collision-tp168324p168337.html
Sent from the User mailing list archive at Nabble.com.
___
lilypond-user mailing list
lilypond-user@gnu.org
https://lists.gnu.org/mailman/listinfo/lilypond-user
Gilberto Agostinho gmail.com> writes:
> but when changing staff the ottava position
> gets lower (!) and collides with the beam.
LilyPond allows you to beam to any other staff, so in general that
beam might have to go up and cross the ottava bracket, while the
bracket must stay with the staff.
069038.n5.nabble.com/possible-bug-change-Staff-and-beam-collision-tp168324p168329.html
Sent from the User mailing list archive at Nabble.com.
___
lilypond-user mailing list
lilypond-user@gnu.org
https://lists.gnu.org/mailman/listinfo/lilypond-user
x27;8
> \ottava #1 a'''
> \ottava #0 a'
> a,
> }
> \new Staff = down {
> \clef bass
> s2
> }
>>>
>
> \new PianoStaff <<
> \new Staff = up {
> \override Score.Beam.damping = 3
> \stemUp a'8
> \ottava
temUp a'8
> \ottava #1 a'''
> \ottava #0 a'
> a,
> }
> \new Staff = down {
> \clef bass
> s2
> }
>>>
>
> \new PianoStaff <<
> \new Staff = up {
> \override Score.Beam.damping = 3
> \stemUp a'8
>
Up a'8
>\ottava #1 a'''
>\ottava #0 a'
>a,
> }
> \new Staff = down {
>\clef bass
>s2
> }
>>>
>
> \new PianoStaff <<
> \new Staff = up {
>\override Score.Beam.damping = 3
>\s
s2
}
>>
\new PianoStaff <<
\new Staff = up {
\override Score.Beam.damping = 3
\stemUp a'8
\ottava #1 a'''
\ottava #0 a'
\change Staff = "down" a,
}
\new Staff = down {
\clef bass
s2
}
>>
Which pr
Hi all,
Given
\new ChoirStaff <<
\new Staff
\new Lyrics
\new Staff
>>
Can the Lyrics have staff-affinity = #CENTER when both Staff contexts are
alive, and staff-affinity = #UP or #DOWN when the lower or upper Staff,
respectively, is frenched? I’m using the latest development bu
=ca.rr@gnu.org] On Behalf Of
MING TSANG
Sent: Wednesday, September 24, 2014 4:52 PM
To: lilypond-user@gnu.org
Subject: \change staff question
Hi, lilyponders:
I try to lilypond duplicate the score as shown on the screen copy of a score
sheet. The change Staff seems not changing from "
abbreviation like
ri = \change Staff = right
or, in case it’s necessary,
ri = { \change Staff = right \voiceTwo } % and the like.
HTH, Simon
Am 25.09.2014 um 01:52 schrieb MING TSANG:
Hi, lilyponders:
I try to lilypond duplicate the score as shown on the screen copy of a
score sheet. The change Staff
r?
>
> I think that \newSpacingSection can help you.
I don't think you even need that:
resetting or unsetting the proportionalNotationDuration
\unset Score.proportionalNotationDuration
should just do it!
Eluze
--
View this message in context:
http://lilypond.1069038.n5.nabble.
2013/6/6 Andrew Bernard :
> Thanks, that works - but has the unfortunate side effect of spacing the rest
> of the score far too wide. Is there a way you can adjust proportional
> spacing for a single bar?
I think that \newSpacingSection can help you.
hth,
Janek
___
Thanks, that works - but has the unfortunate side effect of spacing the
rest of the score far too wide. Is there a way you can adjust
proportional spacing for a single bar?
Andrew
On 6/06/13 12:32 AM, Eluze wrote:
augment the value for the proportional duration:
proportionalNotationDuration
Andrew Bernard wrote
> Greetings List,
>
> The following snippet shows an unexpected behaviour. If proportional
> spacing is enabled, the stems become unevenly spaced, but only when using
> \change Staff. With proportional spacing not enabled, there is no problem.
>
> What i
Greetings List,
The following snippet shows an unexpected behaviour. If proportional
spacing is enabled, the stems become unevenly spaced, but only when using
\change Staff. With proportional spacing not enabled, there is no problem.
What is going on here? I am wanting proportional notation for
Hi there,
Thanks for your responses. I'll make due with the current span stem
engraver, but I think that it would be easier to extend the functionality
of the \change Staff = "staffName" paradigm to do this more elegantly in
future versions.
cheers,
Jeff
On Fri, Jan 25, 2013 a
- Original Message -
From: "Xavier Scheuer"
To: "Jeffrey Trevino"
Cc: "lilypond-user"
Sent: Friday, January 25, 2013 10:50 AM
Subject: Re: change staff for component notes of chord
On 25 January 2013 08:17, Jeffrey Trevino
wrote:
hi there,
I like th
On 25 January 2013 08:17, Jeffrey Trevino wrote:
> hi there,
>
> I like the "change staff" interface for switching staffs and beaming across
> them. Is there a similar interface available for chords, which allows the
> user to specify that certain higher or lower n
hi there,
I like the "change staff" interface for switching staffs and beaming across
them. Is there a similar interface available for chords, which allows the
user to specify that certain higher or lower notes should be drawn on a
different staff? I would find this much easier to us
On Aug 19, 2012, at 11:38 AM, cgodefro free wrote:
> Hello,
>
> I'm experimenting some issues with the change staff command. It seems that
> both staff are linked together.
> the \stemUp is not taking into account and the \change Staff = "up" affect as
> well
Hello,
I'm experimenting some issues with the change staff command. It seems
that both staff are linked together.
the \stemUp is not taking into account and the \change Staff = "up"
affect as well the down staff.
Does anyone can help me "unlinked" the both staff?
i
' {
<< { c'1 } \context Voice = "mid" { \change Staff = "lo" c4 d e f~ } >>
<< { d'1 } \context Voice = "mid" { f4 e d c } >>
}
bb = { s1*2 }
<<
\new Staff = "hi" { \aa }
\new Staff = "lo" {
On Tue, 12 Jun 2012 15:24:49 -0700 (PDT)
-Eluze wrote:
>
>
> Tiresia Giuno wrote:
> >
> > in the attached files (.ly & .png) the alteration of the first b'
> > in the second bar produces an incorrect length of the stems and an
> > incorrect position of the beam.
> >
>
> agreed, but version 2.
essage in context:
http://old.nabble.com/stem-length-and-change-staff-tp34002754p34002856.html
Sent from the Gnu - Lilypond - User mailing list archive at Nabble.com.
___
lilypond-user mailing list
lilypond-user@gnu.org
https://lists.gnu.org/mailman/listinfo/lilypond-user
that?
To correct this situation, I'm overriding the beam's position with
\once \override Beam #'positions = #'(-4.5 . -5.5)
Any other suggestion?
Thanks a lot,
T
%{ changeStaffStem %}
% -*- indent-tabs: true; tab-width: 2;
\version "2.14.2"
\include "e
In data martedì 13 settembre 2011 17:24:49, hai scritto:
> On 13 September 2011 17:07, Mario Moles wrote:
> > Any idea? Thank's!
> >
> > [code]
Ok! Great! Thank you!
>
> That's because you use the << \\ >> construct, which implicitly
> creates voices "1" and "2" in *both* staves.
>
> Please u
ry!
In the bar 2, leftOne: 2° g is not in the correct stave!
\version "2.15.10"
csr = \change Staff = "right"
csl = \change Staff = "left"
global = {
\key g \major
\time 6/8
}
rightOne = \relative c' {
\global
% Qui segue la musica.
\global
% Qui s
On 13 September 2011 17:07, Mario Moles wrote:
>
> Any idea? Thank's!
>
> [code]
>
That's because you use the << \\ >> construct, which implicitly
creates voices "1" and "2" in *both* staves.
Please use explicitly instantiated voices instead and it should work
fine. See the modified \score
er 13, 2011 4:07 PM
Subject: \change Staff don't work fine
Any idea? Thank's!
\version "2.15.10"
csr = \change Staff = "right"
csl = \change Staff = "left"
sn=\stemNeutral
su=\stemUp
sd=\stemDown
tn=\tieNeutral
suon = \sustainOn
Any idea? Thank's!
\version "2.15.10"
csr = \change Staff = "right"
csl = \change Staff = "left"
sn=\stemNeutral
su=\stemUp
sd=\stemDown
tn=\tieNeutral
suon = \sustainOn
suof = \sustainOff
tempoMark = {
\once \override Score.RehearsalMark #'se
Cheers. I didn't know where to put this, but I thought here was best, seeing
as I seem to see many people here seem to work on LilypondTool as well.
Thanks
George
Valentin Villenave wrote:
>
> On Mon, Dec 13, 2010 at 11:26 PM, George_ wrote:
>> I seem to be having a pro
On Mon, Dec 13, 2010 at 11:26 PM, George_ wrote:
> I seem to be having a problem with \change Staff screwing up my barchecks.
Thanks, I've added it to the LilyPondTool bug tracker:
https://sourceforge.net/tracker/?func=detail&aid=3138066&group_id=91119&atid=596024
Cheers,
Va
On 12/14/10 10:38 AM, "George_" wrote:
>
>
>
> Phil Holmes-2 wrote:
>>
>> - Original Message -
>> From: "George_"
>> To:
>> Sent: Monday, December 13, 2010 10:26 PM
>> Subject: \change Staff and barchecks in Li
Phil Holmes-2 wrote:
>
> - Original Message -
> From: "George_"
> To:
> Sent: Monday, December 13, 2010 10:26 PM
> Subject: \change Staff and barchecks in LilyPondTool
>
> Could you post a tiny, complete example that shows t
- Original Message -
From: "George_"
To:
Sent: Monday, December 13, 2010 10:26 PM
Subject: \change Staff and barchecks in LilyPondTool
I seem to be having a problem with \change Staff screwing up my barchecks.
For example:
e16 d c d e8 f
\change Staff = "LH"
I seem to be having a problem with \change Staff screwing up my barchecks.
For example:
e16 d c d e8 f
\change Staff = "LH"
gis, e r a |
for me produces a barcheck of 9/8.
bes8. a16 g f e d
\change Staff = "LH"
cis4 f8 \rest cis |
gives a barcheck of 17/16, and
\change
Hi Branco,
> Maybe an easier way would be to make multiple \score (one per part)
> but if I'm not wrong this would lead to several midi files and to
> repeat for each part the settings of time, clef, key, not to mention
> staffgroup etc.
I do use the alternative you describe. To avoid typing thing
1 - 100 of 132 matches
Mail list logo
