Hi List
Is it possible to start the Quicktime Installer in a specific language?
I have downloaded the full Installer from their website in English, but if I
run the installer on a Machine with a Danish operating system, it will show
the license agreement in Dutch, probably because it is trying
does anybody knows if it's possible to have a timecode using quicktime in
director 8.5
and how can we control it?
i can't anything on the macromedia web site
thanks
[To remove yourself from this list, or to change to digest mode, go to
http://www.penworks.com/LUJ/lingo-l.cgi To post
does anybody knows if it's possible to have a timecode using
quicktime in
director 8.5
and how can we control it?
i can't anything on the macromedia web site
I don't know what you mean by Timedoce. are you talking about SMPTE or
the like? if so then this is likely something that you will
Is this what you need:
currentMovieTime = sprite(gMyVideoSprite).movietime
myFrameRate = 15 --this constant is your QT's frames per second
put string( movieTimeToHMS(currentMovieTime,myFrameRate))
Ray Broussard
http://PhotographicVR.com
on 7/30/01 3:46 PM, Dominic Villiard at [EMAIL
I have several DV questions.
I have a quicktime that I have cued by buttons to go to a certain timecode
point. First it will take up to 10 seconds to get there. Then it will
freeze on the first frame, and when it finally plays, jerk up to 3 seconds
ahead.
the quicktime is 125 MB and when I try
It's probably just the fact that it is 125 Mb. I would bet that if you open
it in the QT movie player and scrub the playhead in to say 1/2 the movie
it'll take some time before it starts too... Normal behavior.
It takes a while for the hard drive to seek that far into the file is all.
About all
the nightboy wrote:
I have several DV questions.
I have a quicktime that I have cued by buttons to go to a certain timecode
point. First it will take up to 10 seconds to get there. Then it will
freeze on the first frame, and when it finally plays, jerk up to 3 seconds
ahead.
the
Incidentally, using DV as an abbreviation for digital video can be
confusing. DV is specifically the codec used in DV cameras, and that
can make quite a difference to the answer, if the codec was DV.
I'm guessing that it's not, and that the key frames are set wide
apart. If you go to the
, I am at a loss.
-Natalia
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of Kerry Thompson
Sent: 11. juli 2001 08:37
To: [EMAIL PROTECTED]
Subject: RE: lingo-l QuickTime path names on Mac
I did use Joliet file names, and all the files
:[EMAIL PROTECTED]]On
Behalf Of Kerry Thompson
Sent: 11. juli 2001 08:00
To: [EMAIL PROTECTED]
Subject: RE: lingo-l QuickTime path names on Mac
Ok, now I am pretty tired of this problem. I have isolated the problem to
be
the actual burning of the CD, I am using Toast, and have tried burning it
both
I did use Joliet file names, and all the files are in the partition, and I
can open them from the cd, but the strange part is, if I try and import them
from the cd into director, it can't read them? I can browse to the files,
and then director simply creates some sort of a reference to the
.
-Natalia
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of Kerry Thompson
Sent: 11. juli 2001 08:37
To: [EMAIL PROTECTED]
Subject: RE: lingo-l QuickTime path names on Mac
I did use Joliet file names, and all the files are in the partition, and I
can open
I've always used Toast and either hfs, or hybrid hfs/iso and everything
has been fine.
If you're burning this for the mac only, why are you trying to do it as
anything other than hfs anyway?
[To remove yourself from this list, or to change to digest mode, go to
Cc: [EMAIL PROTECTED]
Subject: RE: lingo-l QuickTime path names on Mac
I've always used Toast and either hfs, or hybrid hfs/iso and everything
has been fine.
If you're burning this for the mac only, why are you trying to do it as
anything other than hfs anyway?
[To remove yourself from
Hi all
I am having trouble burning a cd that keeps the path names to the QuickTime
files correctly.
My structure is quite simple, my .dir file has a cast called movies, which
naturally links to my QuickTime movies in a subfolder called 'film'.
When I create the projector, it works fine on my Pc,
Have you moved your movies into the folder film after you have imported
them into your cast. If so the link is down and you have to reassign the
path in the property window of each movie.
T__
On 10-07-2001 11:36, Natalia Tjelum [EMAIL PROTECTED] wrote:
Hi all
I am having trouble burning
PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of Tom Vandenbossche
Sent: 10. juli 2001 12:00
To: lingo l
Subject: Re: lingo-l QuickTime path names on Mac
Have you moved your movies into the folder film after you have imported
them into your cast. If so the link is down and you have to reassign the
path
You have to explicitly tell director where the quicktime movies are using
'the moviepath' as a starting point. Keeep in mind that the way paths are
shown on the mac are different than on the pc (ie on the mac it's
'HardDrive:film:mymovie.mov' whereas on the pc it would be
'D:\film\mymovie.mov'.
/, \ or : for any platform
and it uses it correctly.
Charlie Fiskeaux II
The Creative Group
www.cre8tivegroup.com
859/858-9054 x29
cell: 859/312-3883
- Original Message -
From: [EMAIL PROTECTED]
To: lingo l [EMAIL PROTECTED]
Sent: Tuesday, July 10, 2001 6:28 AM
Subject: Re: lingo-l
PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of Charlie Fiskeaux II
Sent: 10. juli 2001 15:31
To: [EMAIL PROTECTED]
Subject: Re: lingo-l QuickTime path names on Mac
There is no need to use the moviePath anymore; it is outdated. Use the
character @ where you would normally use the
moviePath
Fiskeaux II
Sent: 10. juli 2001 15:31
To: [EMAIL PROTECTED]
Subject: Re: lingo-l QuickTime path names on Mac
There is no need to use the moviePath anymore; it is outdated. Use the
character @ where you would normally use the
moviePath. It references the current movie path, but it also removes
: 859/312-3883
- Original Message -
From: Natalia Tjelum [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, July 10, 2001 10:49 AM
Subject: RE: lingo-l QuickTime path names on Mac
Damm, I thought it worked.. But nooo
Can i somehow set the path to the movie files, the path
Snip
2. reimport them (or a default movie) non-linked and link them with
member(XXX).filename=the pathname whatsoever
regards, Florian
/snip
Wahayyy, I knew there was a way, never doubted it for one second, and will
do loads of more cross platform applications.
Thanks a LOT!
Have a nice
so natalia,
which method did you use?
paul
Natalia Tjelum wrote:
Snip
2. reimport them (or a default movie) non-linked and link them with
member(XXX).filename=the pathname whatsoever
regards, Florian
/snip
Wahayyy, I knew there was a way, never doubted it for one second, and will
]
Subject: Re: lingo-l QuickTime path names on Mac
so natalia,
which method did you use?
paul
Natalia Tjelum wrote:
Snip
2. reimport them (or a default movie) non-linked and link them with
member(XXX).filename=the pathname whatsoever
regards, Florian
/snip
Wahayyy, I knew there was a way
On 7/10/01 4:25 PM, Natalia Tjelum [EMAIL PROTECTED] spewed forth:
handler: member(moviename).filename=
moviepathmoviesfolder:moviename.mov
I've answered this a couple of times...this would only work for the mac. You
need to do different path chars for each. The pc is \, the mac is :
Do
: 10. juli 2001 22:42
To: Lingo
Subject: Re: lingo-l QuickTime path names on Mac
On 7/10/01 4:25 PM, Natalia Tjelum [EMAIL PROTECTED] spewed forth:
handler: member(moviename).filename=
moviepathmoviesfolder:moviename.mov
I've answered this a couple of times...this would only work for the mac
- Original Message -
From: g r i m m w e r k s [EMAIL PROTECTED]
To: Lingo [EMAIL PROTECTED]
Sent: Tuesday, July 10, 2001 4:41 PM
Subject: Re: lingo-l QuickTime path names on Mac
On 7/10/01 4:25 PM, Natalia Tjelum [EMAIL PROTECTED] spewed forth:
handler: member(moviename).filename
Honestly you're not doing something properly - I've done cross platform cds
with absolutely no problems.
Are you running from a projector that is ON the new partition, or are you
running from somewhere else?
Ie:
Harddrive
- Projector
- movie directory
On 7/10/01 4:53 PM,
.
-Natalia
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of g r i m m w e r k s
Sent: 10. juli 2001 23:09
To: Lingo
Subject: Re: lingo-l QuickTime path names on Mac
Honestly you're not doing something properly - I've done cross platform cds
with absolutely
Ok, now I am pretty tired of this problem. I have isolated the problem to be
the actual burning of the CD, I am using Toast, and have tried burning it
both as an ISO, and as Hybrid, non of which worked, but if I burn it as a
Mac volume, it works! Why?
Did you use Joliet file names? Are you sure
Hey - just curious - I've read that you can toss in a quicktime pro serial
number during an app - but is there any actual control over the quicktime
pro functions from an app, ie taking an aiff file opened with quicktime
and exporting with mp3 compression?
[To remove yourself from this list,
Umh, Is the Flash member also set to direct to stage?
Pekka
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of Nicolas S.-Roy
Sent: 21. kesakuuta 2001 17:49
To: [EMAIL PROTECTED]
Subject: lingo-l Quicktime 5 over Flash Cast Member
If either is set to Director To Stage you will get this.
At 10:48 AM -0400 6/21/01, Nicolas S.-Roy wrote:
Is there a known problem with putting a Quicktime 5 movie (in Direct to
Stage mode) over a playing Flash cast member ?
As soon as I put the Quicktime movie in Direct to Stage mode, it
Umh, Is the Flash member also set to direct to stage?
It may not have to be to cause the flashing. Set the static of the
Flash member to true as well as DTS to false.
--
[To remove yourself from this list, or to change to digest mode, go to
http://www.penworks.com/LUJ/lingo-l.cgi To post
Hello Carl,
the following script works (moviescript). You?ll need BuddyAPI for this. (My
mail program will fudge the line break.)
on qtInstallation
--messages: QT needed to start application, install now? and qt needed
set choice = baMsgBox( QuickTime wird benotigt, um diese Anwendung zu
]] On
Behalf Of Scott Flowers
Sent: 08 June 2001 03:58
To: [EMAIL PROTECTED]
Subject: Re: lingo-l Quicktime problem, wants to download rather
thanjust play..!!
[EMAIL PROTECTED] wrote:
I have managed to get my Quicktime movie playing within my director
movie published on the web, however when the page
Hello list,
I have the following code:
on preparemovie
if quickTimeVersion()4 then
open QuickTime Installer.smi
halt
end if
end
All works well...But I want to put in a warning box to tell the end user that the
program will quit and install Quicktime. Where do I pu this code?
Brian Farmer wrote:
Hello list,
I have the following code:
on preparemovie
if quickTimeVersion()4 then
alert You need QuickTime 4, here's your chance to install it.
open QuickTime Installer.smi
halt
end if
end
All works well...But I want to put in a warning
All works well...But I want to put in a warning box to tell
the end user that the program will quit and install
Quicktime. Where do I pu this code?
I assume that you are going to put in an Alert. however, I don't think that
you can do this in the prepareMovie. I think you will need to do it
--
From: Kev [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: lingo-l Quicktime problem, wants to download rather than
just play..!!
Date: Thu, Jun 7, 2001, 9:06 PM
I have managed to get my Quicktime movie playing within my director
movie published on the web, however when the page
Hi,
I have managed to get my Quicktime movie playing within my director
movie published on the web, however when the page loads I reecieve the
prompt to download, which I'm not sure why it doing this, and would like
it to just play rather than prompt to download..
It would seem this should be
[EMAIL PROTECTED] wrote:
I have managed to get my Quicktime movie playing within my director
movie published on the web, however when the page loads I reecieve the
prompt to download, which I'm not sure why it doing this, and would like
it to just play rather than prompt to download..
It
Hi guys
Just a small wierd problem I've made a presentation on a mac with 7.0. I
imported some quicktime movies. These movies are linked to external files.
When I burn up a CD it works fine on the mac but the PC asks me to locate
the files - it can't find them, even though they are in the same
- Original Message -
From: Andy Grogan [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, May 10, 2001 4:45 PM
Subject: lingo-l Quicktime link on PC fails after burning CD
Hi guys
Just a small wierd problem I've made a presentation on a mac with 7.0. I
imported some quicktime movies
We're creating a catalog of QuickTime movies in Director 8. There are
over 350 movies, but no two movies are ever on stage at the same time.
On the Mac, after playing about 200 movies, QuickTime 4.0.2 maxes out,
and we just get white movies, or no video at all. With QuickTime 4.1.2,
we don't have
how can i detect quick time in pc or mac.then if it was install play movie
if was not installed to install it automatic.
is it possible
[To remove yourself from this list, or to change to digest mode, go to
http://www.penworks.com/LUJ/lingo-l.cgi To post messages to the list,
email [EMAIL
l: 859/312-3883
- Original Message -
From: "Jakob Hede Madsen" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, March 28, 2001 6:20 PM
Subject: Re: lingo-l QuickTime problem
At 17:44 -0500 01_03_28, Charlie Fiskeaux II wrote:
I'm having problems with some QuickTime movi
I'm having problems with some QuickTime movies looking pixelated. Depending
on how I compress them, sometimes they look pixelated (like QT movies look
when they are resized smaller than they should be) on all computers here in
the office, and sometimes only on mine (they look fine on other PCs
RE:
--
From: "Charlie Fiskeaux II" [EMAIL PROTECTED]
To: "Lingo List" [EMAIL PROTECTED]
Subject: lingo-l QuickTime problem
Date: Wed, Mar 28, 2001, 5:44 PM
I'm having problems with some QuickTime movies looking pixelated. Depending
on how I compress them, sometimes
At 17:44 -0500 01_03_28, Charlie Fiskeaux II wrote:
I'm having problems with some QuickTime movies looking pixelated. Depending
on how I compress them, sometimes they look pixelated (like QT movies look
when they are resized smaller than they should be) on all computers here in
the office, and
http://www.soh.nsw.gov.au/files/virtual_tour/vrtour2.html
[To remove yourself from this list, or to change to digest mode, go to
http://www.penworks.com/LUJ/lingo-l.cgi To post messages to the list,
email [EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED])
Lingo-L is for learning and helping
anyone has any links to tutorials for quick time vr/director
someone had given me a link in DOUG but its broken.
JUAN_NYC
_
Get your FREE download of MSN Explorer at http://explorer.msn.com
[To remove yourself from this list, or
Sent: 12 March 2001 16:46
To: [EMAIL PROTECTED]
Subject: lingo-l QuickTime VR
anyone has any links to tutorials for quick time vr/director
someone had given me a link in DOUG but its broken.
JUAN_NYC
_
Get your FREE download of MSN
Hello List,
We've begun limited distribution on a recent CD-ROM project that contains many
quicktime movies. The movies play fine on most computers, even lower end models. But
occasionally we've had users tell us that the verbal audio in the movies is almost
indiscernible due to the
I am assuming you are having problems with Windows boxes.
I think the prevailing wisdom here is to ask these users to use 'waveOut'
for the sound out device, rather than the default 'DirectX' (Control
Panels-QuickTime).
Hello List,
We've begun limited distribution on a recent CD-ROM project
inger" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, March 06, 2001 4:28 PM
Subject: lingo-l Quicktime movie sound track stutters only on certain
systems
Hello List,
We've begun limited distribution on a recent CD-ROM project that contains
many quicktime movies. The movies play fi
Thanks Sean,
The links you gave me were very interesting. They did not help but I solved
the problem myself by taking my original sound files and resaving them a
different way. It was crazy that I had to do this but I guess QT for Windows
is picky. Anyway, today I can't make the thing crash
Help please,
I'm authoring in Director 7 on a Mac, for a project to be delivered in
Windows. I'm using QuickTime 4 on both platforms. My QuickTime files are
audio only. Some use cue points and some don't. With the default installation
of QuickTime the setting is direct out. That causes sounds
Help,
I'm authoring in Director 7 on a Mac, for a project to be delivered in
Windows. I'm using QuickTime 4 on both platforms. My QuickTime files are
audio only. Some use cue points and some don't. With the default installation
of QuickTime the setting is direct out. That causes sounds to get
At 09:47 2/8/2001, Lee Chadwick wrote:
Thanks for the reply. I have tried setting it to the full http path, and
it still does not play. I displays the first frame of the movie, as if it
finds it, but then does not play. It as if there is some sort of
"autoplay" feature turned off. When I tell
Thanks for the reply. I have tried setting it to the full http path, and
it still does not play. I displays the first frame of the movie, as if it
finds it, but then does not play. It as if there is some sort of
"autoplay" feature turned off. When I tell it to show the controller,
then you can
I have a portion of a student project in which the movie refuses to play
when viewed in Shockwave on a remote server. It plays fine on the local
machine when viewed in shockwave/browser. I have the movie cast member
properties set to @movies/goofy.mov. I cannot figure the problem. I
posted to
At 14:45 2/7/2001, Lee Chadwick wrote:
I have a portion of a student project in which the movie refuses to play
when viewed in Shockwave on a remote server. It plays fine on the local
machine when viewed in shockwave/browser. I have the movie cast member
properties set to @movies/goofy.mov. I
At 19:31 03.02.2001 -0800, Mark A. Boyd wrote:
At 18:48 2/3/01, mike cash wrote:
Many moons ago, if you were going to include Quicktime on a CD-Rom for
mass-duplication, you had to pay a Fee for each CD (at least that's what
I've been told anyway).
I've searched apple's site all over about
Many moons ago, if you were going to include Quicktime on a CD-Rom for
mass-duplication, you had to pay a Fee for each CD (at least that's what
I've been told anyway).
I've searched apple's site all over about Quicktime and have found that you
have to sign an agreement with them but, never
At 18:48 2/3/01, mike cash wrote:
Many moons ago, if you were going to include Quicktime on a CD-Rom for
mass-duplication, you had to pay a Fee for each CD (at least that's what
I've been told anyway).
I've searched apple's site all over about Quicktime and have found that
you have to sign an
Hi Simon,
You can use director's framesToHMS() function.
In the following example, if the quicktime movie is of 60 seconds duration,
the function returns the value in hms format.
put framesToHMS(60,1, FALSE, FALSE)
-- " 00:01:00.00 "
Hope this helps,
regards
Ramesh CT
Team Leader -
Hi All,
Apologies if this has come up recently, I checked the archives and can't
find anything relevant.
What I'm after: To have a QuickTime movie playing on stage with a countdown
of the time remaining in HH:MM:SS
Problem: I'm wanting to convert the QuickTime movie duration from ticks to
Hi All,
I've a problem with running quicktime streaming video in shockwave from a
machine which accesses the internet through a proxy.
I've read the (extensive) macromedia technotes and searched the list
archives in vain. The problem is this
I'm streaming quicktime files from a HTTP
Hi All,
Is it possible to play segments in quicktime. I want
to play different segments of the same quicktime
movie.
I have tried cuepoints and it only plays once. I would
like to replicate what the default controler of
quicktime offers when you set chapter tracks.
On one (next)button it goes to
Hi All,
Is it possible to play segments in quicktime. I want
to play different segments of the same quicktime
movie.
I have tried cuepoints and it only plays once. I would
like to replicate what the default controler of
quicktime offers when you set chapter tracks.
On one (next)button it goes to
Should be built into D8 with trackNextKeyTime I think, and then just flip
to that time...
[http://www.grimmWERKS.com ]--
[ graphic design -|- sound design -|- shockwave -|- lingo -|- cdrom ]
[To remove yourself from this list, or to
I am working on a project which will include quicktime vr objects can I
control these in Lingo.
Plus can I embed them not just open in a external link,
All help would be appriacted.
Thanks
Tim
Ps can anybody use corel paradox for report writing
[To remove yourself from this list, or to
Specs: PII , D8, using IE 5
I cannot seem to get a Quicktime movie to play in shockwave. It plays
fine in a Projector, and also in authoring mode. In shockwave, viewed in
IE 5, I receive a "Director player error", stating that it could not
initialize the proper Xtra, and to make certain that
Date: Sun, 26 Nov 2000 12:57:25 +0100
From: jean-louis valero [EMAIL PROTECTED]
Subject: lingo-l quicktime framerate
hello list
Is it possible to know the real framerate of a quicktime movie? I tried
everything(of course may be not...) between digitalVideoTimescale and
the timescale
hello list
Is it possible to know the real framerate of a quicktime movie? I tried
everything(of course may be not...) between digitalVideoTimescale and
the timescale of member but I can't establish by lingo the number of
frames per second a quicktime movie has been compressed with. I do need
Hallo Jean-Louis,
If you use Quicktime Player to get Info
you must select *Video Track * (by default it is
set to movie) from your options (left hand dropDown
menu) and then you can select FrameRate from the
right hand dropDown menu.
I don't know if you can access this info through
Lingo
Hello all!
I am producing a pesentation on CDROM which includes several QuickTime
movies with voice-over. Typical file sizes for these movies are only about
10 to 30 Mb. I have been having trouble with the sound stuttering or
skipping, especially when a lot of movement occurs within the
Hello
I have three small quicktime movies in a director 8 movie. I have all
three movies paused on frame 1. I have it set so if I click on any of the
three qt movies that they go to a new marker in the movie and execute a
scaling of the quicktime movie clicked upon to move and scale larger to
Say.is there a way to use the Quicktime Export xtra from a projector?
[http://www.grimmWERKS.com ]--
[ graphic design -|- sound design -|- shockwave -|- lingo -|- cdrom ]
[To remove yourself from this list, or to change to digest
81 matches
Mail list logo
