\
/( )\
^^-^^ [EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
David Boyes
Posted At: Thursday, August 17, 2006 8:09 PM
Posted To: Marist EDU
Conversation: CUPS
Subject: Re: CUPS
Nothing I can see in the logs.
Guest is responsive.
Probably not VM
This SLES8 guest under z/VM stopped responding and now when we log on
the guest we get the following messages.
Does anyone have any ideas on what I can do to fix this?
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache
To: Marist EDU
Conversation: Cannot open root device, Kernel panic
Subject: Re: Cannot open root device, Kernel panic
Do yo have another SLES8 guest available? Try LINKing to the failing
guests root file system from it and see if you can mount it.
Marist EDU wrote:
This SLES8 guest under z/VM
, 2006 7:53 AM
Posted To: Marist EDU
Conversation: Cannot open root device, Kernel panic
Subject: Re: Cannot open root device, Kernel panic
Was there any recent maintenance done? After maintenance (especially
kernel maintenance) usually mkinitrd and zipl does need to be run before
rebooting. Do you
: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Matt Gourley
Posted At: Wednesday, March 22, 2006 9:35 AM
Posted To: Marist EDU
Conversation: Backups with FDR/Upstream
Subject: Backups with FDR/Upstream
Morning all,
I know this isn't the Upstream list, but I figured I'd sanity-check what
I think it's because you don't have a wildcard. i.e.
find /var/opt/CPfw1-50-04/log/*.log* -mtime +13 -exec rm -f {} \;
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] Behalf Of
Longstreth, Lance
Posted At: Tuesday, May 24, 2005 11:33 AM
Posted To: Marist EDU
Josh
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Post, Mark K
Posted At: Wednesday, April 13, 2005 3:22 PM
Posted To: Marist EDU
Conversation: Problems loading IBMtape into kernel
Subject: Re: Problems loading IBMtape into kernel
One possibility
Posted To: Marist EDU
Conversation: Problems loading IBMtape into kernel
Subject: Re: Problems loading IBMtape into kernel
No, you don't need the kernel source. Did you try the modprobe command
anyway?
Mark Post
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf
.
primvr2p:~ # IBMtaped start
primvr2p:~ # IBMtaped status
IBMtaped is running, pid 2947.
Josh
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Christoph Arenz
Posted At: Thursday, April 14, 2005 10:55 AM
Posted To: Marist EDU
Conversation: Problems loading
Running SLES8 under z/VM. We're trying to access a tape device using
the IBM Drivers, when I install the RPM I get the following errors:
primvr2p:~ # uname -a
Linux primvr2p 2.4.21-273-default #1 SMP Mon Jan 17 13:17:09 UTC 2005
s390 unknown
primvr2p:~ # rpm -ivh
Kreuter
Posted At: Tuesday, March 01, 2005 11:39 AM
Posted To: Marist EDU
Conversation: sles9 s390x installation woes
Subject: sles9 s390x installation woes
Hi: I'm trying on a z800 to do a SLES9 install. Trying both FTP and NFS method.
No joy. The FTP method dies with (from VNC) a cannot read
One of our instances encountered several periods of slowness yesterday and
during my investigation one thing discovered that the one having the
problems wasn't using any of the swap assigned to it. Below is the output
of cat /proc/meminfo, first on the slow instance then on another instance
that
You need to add it to the list in /etc/zipl.conf then run zipl.
Josh
-Original Message-
From: Hugo Rivera [mailto:[EMAIL PROTECTED]
Sent: Wednesday, May 19, 2004 12:59 PM
To: [EMAIL PROTECTED]
Subject: Adding a new DASD
Good morning -
I'm trying to add a new dasd to my Linux (SuSE)
us by telephone or email (to the
numbers or address above) immediately.
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] Behalf Of
Marist EDU
Sent: 16 April 2004 01:52
To: [EMAIL PROTECTED]
Subject: Re: SLES on-line updates?
I'm guessing most of you out there have
I'm guessing most of you out there have multiple Linux's running. What I
did was I had a central box run wget and download all the patches. Then
with some tweaking of Online Update I run all my updates from an internal
patch server. Here's what I did:
Verify the yas2-online-update rpm is
My goal is to use the combination of nss_ldap and pam_ldap to authenticate
ssh users against an Active Directory domain ?
On www.padl.com the documentation pages mention using a product called
ad4unix by CSS-solutions. But when I go to download the utility
css-solutions.com is not a valid web
!
| - someone famous i'm sure!
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Marist
EDU
Sent: Wednesday, April 07, 2004 3:19 PM
To: [EMAIL PROTECTED]
Subject: installing db2 connect on sles8 sp3
We are getting an error
We are getting an error when we try to install db2 connect on sles8 sp3.
The install options come up in X, then we tell it to start the install we
get:
/usr/local/downloads/db2/linux390/install/db2jinst: line 130: 5816
Segmentation fault $JAVA_PATH/$JAVA_INTERPRETER $JAVA_OPTIONS -cp
I would avoid using Samba. It mangles the symbolic links and you will get
crazy results. We just tar.gz 'd the file and ftp'd it up that's the safest
way to do it, IMHO.
Josh
-Original Message-
From: Adam Thornton [mailto:[EMAIL PROTECTED]
Sent: Tuesday, April 06, 2004 12:21 PM
To:
How do I choose which file system to use on my Linux Instances running SLES8
SP3 under z/VM?
ext2
ext3
reiserfs
I realize the main difference between ext2 and the others is it's not
journaled, but is that the only thing ??
Josh Konkol, CNE MCSE
Technical Research Specialist
.~.GuideOne
I tried this question on the Samba user list, but haven't gotten a response,
anyone here have any ideas ??
I'm trying to get Samba to compile on SLES8 SP3 (Linux under z/VM) and I'm
getting the following error. Configure ran fine with ./configure
--with-ads --with-winbind --with-krb5, but when
Please bear with me as I'm am Linux guy and not a Mainframe guy :-)
We are running SLES8 under z/VM. We have purchased a new Shark and have
DASD allocated as Open Systems. I would like to access this space from
Linux.
Can someone please point me in the right direction?
Thanks in Advance,
I'm trying to install an add-on for Websphere using RPM and I'm getting a
failed dependency. I have checked www.rpmfind.net and there isn't anything
out there. I also looked on the SLES7 and SLES8 CD's and found a
libstc++-3.2-34.s390.rpm for SLES8 but that required even more packages to
be
PROTECTED]
Subject: Re: Failed dependencies on SLES7
Install compat-*.rpm from SLES8 CD1
WBR, Sergey
Marist EDU [EMAIL PROTECTED]
Sent by: Linux on 390 Port [EMAIL PROTECTED]
29.01.2004 14:45
Please respond to Linux on 390 Port
To: [EMAIL PROTECTED]
cc
I just finished installing and configuring SLES8 running under z/VM. I was
in the process of setting up samba to start automatically when the instance
is booted. I added a symbolic link to rc3.d . After that I did a shutdown
-r now. Now all I get is the following error:
HCPGIR453W CP entered;
I know this is a little off topic, but you guys are the best set of Linux
guru's I'm aware of.
Anyone know of a good (free or pay) 3270 emulator that runs on Linux. I've
tried x3270 and it just isn't what I need, I need more control over the
keyboard (i.e. mapping the CTL key to Enter).
\
KeyEnd: FieldEnd() \n\
KeyControl_R: Enter() \n\
KeyControl_L: Reset() \n\
KeyNext: PF(8)
! keymap (-keymap)
x3270.keymap: base,mine
hope it helps
Marian
--- Marist EDU [EMAIL PROTECTED] wrote:
I know this is a little off topic, but you guys are
the best set of Linux
guru's I'm
I just used the YAST2 Online update tool to install the latest patches on
our instances running WAS. After the install I discovered Websphere
wouldn't start.
After some newsgroup searching I found that the problem was due to the fact
that localhost resolved to 127.0.0.1 instead of the external
our proxy, make sure I had wget
and put on rpm -Uhv yast2-core-pkginfo.rpm yast2-config-online-update.rpm
yast2-trans-online-update.rpm.
Gook luck
Phil
-Original Message-
From: Marist EDU [mailto:[EMAIL PROTECTED]
Sent: 25 September 2003 19:39
To: [EMAIL PROTECTED]
Subject: SLES7
Has anyone gotten SLES7 Yast Online Update to work ? Every server I try to
goto says: File not found on server Maybe I just need a new list of
mirrors. Any help is appreciated.
Josh Konkol, CNE MCSE
Technical Research Specialist
.~.GuideOne Insurance
/V\
/( )\
^^-^^
This
We are running WebSphere 4 on SLES7 on several instances under z/VM. We've
been using this configuration for over 1.5 years with little problems. We
have one instance that is fairly new that is acting up and I was hoping
someone out there could help.
Not sure what is triggering it, but
We are running SLES7 and trying to initailize swap space that exists on a
VDISK. I realize that the space needs to be formated using mkswap everytime
the instance is logged off.
I added the following two lines to /etc/rc.d/boot.local
/sbin/mkswap /dev/dasdd
/sbin/swapon /dev/dasdd -p 1
But
We are currently using CheckPoint Firewall SecuRemote to provide remote
access to our road-warrior users. Really, the only access they need is
tn3270. Is anyone aware of an open source, secure way I could provide them
access.
I ran accross a product called Mindterm which gives ssh access, but
Someone please correct me if I'm wrong, but I thought that the .config file
was only used for compiling the kernel. Once you have a compiled (and
hopefully working kernel) you don't need the .config file to boot.
Now you could theoretically take that .config file and use it to compile the
I just got off the phone with a SuSE Sales Person and he told me that the
Beta version of SLES7 was the exact same cd as that which comes with the
purchased version (for $11,000). Anyone have any thoughts on that ??
Josh Konkol, CNE MCSE
Senior Network Analyst
.~.
/V\
/( )\
^^-^^
I spent several weeks working on just that with little success. The
reqs on 2.4 are that you upgrade so many utilites (i.e. glibc, binutils,
modutils, etc) that you run into so many little problems. With the patches
from developerworks I was able to ALMOST get it to work but in the end I
ended
You need to use an Xserver software on your computer to connect to it.
Try using cygwin with XFREE86. http://www.cygwin.com
Josh
-Original Message-
From: Larry Heath [mailto:[EMAIL PROTECTED]]
Sent: Thursday, December 12, 2002 9:06 AM
To: [EMAIL PROTECTED]
Subject: No GUI ??
I've
The share print$ is set to read only
I would comment out both that and the write list to see if we can get it
working first.
Josh
-Original Message-
From: Crowley, Glen L [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, December 04, 2002 9:28 AM
To: [EMAIL PROTECTED]
Subject: Re: smbclient
error
I commented them out as suggested, but the result of the cupsaddsmb is the
same.
Glen
-Original Message-
From: Marist EDU [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, December 04, 2002 9:38 AM
To: [EMAIL PROTECTED]
Subject: Re: smbclient authorization error
The share print$ is set
If I understand you correctly you can't ping from the MP3000 to your
desktop or vice versa. Right ?
Are they on the same subnet ?? If not check your routes.
If you want to check telnet, try telneting from the MP3000 to itself,
that will tell you if it's running.
HTH
Josh
-Original
Last time I got that error was because I did everything right but I forgot
to
enable ACL's using make menuconfig when I compiled the Kernel.
Josh
-Original Message-
From: Tim Verhoeven [mailto:[EMAIL PROTECTED]]
Sent: Monday, September 30, 2002 2:37 AM
To: [EMAIL PROTECTED]
Subject:
Backgroud: Running SLES on s/390. Wanting to get Samba w/ACL support
running on an LVM volume.
Here are the steps I've done:
Installed/Upgraded:
gettext 0.11.2
binutils 2.12.90.0.4 + DW Patch
glibc 2.2.5 + linuxthreads + DW Patch
modutils 2.4.7
pristine kernel + DW Patches + acl.bestbits.at
I think I figured it out. I messed up on patching entry.S and unistd.h .
I'm trying it again with my corrections.
Thanks!!
Josh
-Original Message-
From: Michael MacIsaac [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 16, 2002 8:49 AM
To: [EMAIL PROTECTED]
Subject: Re: So Close, but
I think he was talking about the md5 checksums.
-Original Message-
From: Daniel Casey [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 10, 2002 11:46 AM
To: [EMAIL PROTECTED]
Subject: Re: IBM Delivers New Directory Offerings For Linux
Is it a good idea to post a 200-500mb doc(s) to a
Now that I've successfully upgraded my SLES 2.4.7 kernel to 2.4.17acl I get
the following error when I run zipl:
WARNING: This API version '0' doesn't match withe the API version of the
DASD driver '4'!
Has anyone seen this or can someone point me in the right direction ??
Thanks !!
Josh
Can you be a little more specific security issue regarding SAMBA ??
I'm planning on doing the same thing myself.
Thanks,
Josh
-Original Message-
From: Hall, Jammie [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, June 26, 2002 1:44 PM
To: [EMAIL PROTECTED]
Subject: print server/SAMBA
I
We are running SuSE 7.0 (kernel 2.2.16) on the 390 under z/VM. On of my
co-workers ran across this article:
http://www.infoworld.com/articles/hn/xml/02/06/20/020620hnapache.xml?0620thp
m
Basic problem is there's a security flaw in 1.3.12 and we need to get
upgraded. I've checked
Tyler,
In my documentation I use patch -sp0 something.diff. I've used it
before and didn't have any problems.
HTH
Josh Konkol, CNE MCSE
Senior Network Analyst
GuideOne Insurance
Mail Stop AB-1
515-267-2427
[EMAIL PROTECTED]
.~.
/V\
/( )\
^^-^^
-Original Message-
From: Tyler
48 matches
Mail list logo
