e are my own and do not engage my company in any
> way */
>
>
> From: Linux on 390 Port on behalf of Rob van
> der Heij
> Sent: February 6, 2021 12:18 PM
> To: LINUX-390@VM.MARIST.EDU
> Subject: Re: Elasticsearch and Openshift on zVM - Suffering from CPU steal
Hello,
I hope someone can share the experience or put some light on the problem. I
will refer to elasticsearch as "ES" in this email.
We are running 2 Openshift clusters on 1 zVM LPAR (16 logical CPU , SMT2).
Cluster 1 (development workload):
3x Master node (each zLinux 8 vCPU) (VSWITCH-1
Hello,
I have the following network configuration scenarios. In scenario 1 -
physical network infrastructure attached to Mainframe is not involved in
communication between two zLinux hosts and traffic is handled on zVM level
, is it a correct assumption ?
Scenario 1:
2x zLinux on VSWITCH (option
Hello,
I also thought that enabling SMT will degrade performance of a single
threaded process, but I could not find anyone to confirm that. Thank you
Christian.
Alan:
Postgres is not constrained by having only 4 cores. It's running fine with
1 vCPU. The problem is with overall Openshift Cluster
R hypervisor creates
> logical CPUs, each getting horsepower according to the weighting of the
> LPAR.
>
> For these reasons, you generally do not want to have more virtual CPUs in a
> guest than you have logical CPUs to run them on.
>
> Regards,
> Alan Altmark
> IBM
>
enabling the feature, CPU utilization On Mainframe
dropped from 95% to 60%. On the other hand, I'm wondering if it negatively
affected single threaded workloads?
All the best
Mariusz
On Sun, 2 Aug 2020, 00:34 Mark Post, wrote:
> On 7/31/20 7:46 PM, Mariusz Walczak wrote:
> > We h
Hello Group,
We have 4 IFL on Mainframe box, 4 IFL on zVM and 4 cpu on zLinux. I'd like
to gain zLinux capacity (run more processes) and increase to 16 cpu. Will I
degrade performance of a single threaded workload if I do this?
All the best,
Mariusz
Hello Chris,
If you are on zVM, then Boot SLES into installation mode (from VM reader
using image and parm file). Temp root password and IP is specified in parm
file. Then you connect via ssh, activate dasd, mount and chroot (look into
Sles Admin guide "repair bootloader")
Regards.
M.
On Wed,
Hello,
FYI. To make linux LDAP client working with AD, I had to add posix
attributes (uid,gid,uidNumber, etc..) to my AD user. I configured LDAP
client using "sssd" on SLES12 and I'm happily authenticating against AD.
Thanks for help,
Mariusz
pon., 1 kwi 2019 o 16:19 Alan Altmark napisaĆ(a):
Hello Group,
We are running zLinux SLES 12-3 on zVM. I'm looking for a way to
authenticate user logon to zLinux server over windows AD LDAP.
I configured LDAP client to point to windows LDAP. Then I used ldapsearch
to make a query for id user01 - I got results. I used yast "auth" module to
"test
The below email is classified: Internal
Hello group,
Recently we had a DASD failure and I had to delete and recreate logical volume
in LVM. We had two model-9 DASDs defined as two logical volumes (different
volume groups). I used lvcreate -l 1760 to make sure the number of extents is
the
-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Mariusz
Walczak
Sent: Thursday, March 22, 2018 11:20 AM
To: LINUX-390@VM.MARIST.EDU
Subject: zLinux with HyperPAV
The below email is classified: Internal
Hello,
I'm trying to setup HyperPAV on our SLES 11.4. From
The below email is classified: Internal
Hello,
I'm trying to setup HyperPAV on our SLES 11.4. From documentation I read I must
define a full-pack minidisk in form:
MDISK basevdev devtype DEVNO rdev mode OR MDISK basevdev devtype 0 END
volser mode
I used DEVNO and I believe I was able to
The below email is classified: Internal
Hello,
If someone is planning to run TSM client > v 6.4.3 on z14, then ask IBM to
provide you gskcrypt and gskssl package at least 8.0.50.84. It fixed the issue.
Thanks,
Mariusz
-Original Message-
From: Mariusz Walczak
Sent: Wednesday, Ma
vary by software product - open
a PMR against TSM client and they will steer you towards the best solution in
your case.
On Fri, Mar 9, 2018 at 3:47 AM, Mariusz Walczak <
mariusz.walc...@deutsche-boerse.com> wrote:
> The below email is classified: Internal
>
> Hello,
>
&g
Thank you for all replies. I will make use of this knowledge.
Mariusz
2017-05-25 17:39 GMT+02:00 Alan Altmark :
> On Thursday, 05/25/2017 at 02:40 GMT, Dave Jones
> wrote:
> > For quick and dirty z/VM accounting reports, I find CMS Pipelines very
Hello Community ,
We are running VM 6.4. Do you know any tool or manual for processing
accounting records on zVM? Those files are accumulating on our systems and
I'd like to create a report from it. However, the data from column 29 is
not human readable (""b"}a"") and I'm not sure how to
d CU notifications.
>
> Regards,
> Alan
>
>
>Mariusz Walczak --- [LINUX-390] z/VM 540 - Simulate I/O error ---
> From:"Mariusz Walczak" <blanc...@gmail.com>To:LINUX-
> 390@VM.MARIST.EDUDate:Thu, Sep 29, 2016 11:57 PMSubject:[LINUX-390] z/VM
> 54
Hello,
Lately I installed a PTF to EREP on second level z/VM. I'm looking for a
way to test the PTF. Do you know how to simulate hardware error and force
EREP to write records ?
So far I tried...
- writing to the file simultaneously by 2 users.
- attempt to write on read-only
19 matches
Mail list logo