From: Ivan T. Ivanov iiva...@mm-sol.com
This patch fix compilation error and is an intermediate step
before the addition of DeviceTree support for newer targets.
Fix suggested here: https://lkml.org/lkml/2013/6/19/381
Cc: David Brown dav...@codeaurora.org
Cc: Daniel Walker dwal...@fifo99.com
Cc
From: Ivan T. Ivanov iiva...@mm-sol.com
Cc: Felipe Balbi ba...@ti.com
Cc: Greg Kroah-Hartman gre...@linuxfoundation.org
Cc: linux-...@vger.kernel.org
Cc: linux-ker...@vger.kernel.org
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
drivers/usb/phy/phy-msm-usb.c | 78
From: Ivan T. Ivanov iiva...@mm-sol.com
Cc: Felipe Balbi ba...@ti.com
Cc: Greg Kroah-Hartman gre...@linuxfoundation.org
Cc: linux-...@vger.kernel.org
Cc: linux-ker...@vger.kernel.org
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
drivers/usb/phy/phy-msm-usb.c | 99
From: Ivan T. Ivanov iiva...@mm-sol.com
This fixes checkpatch.pl warnings.
Cc: Felipe Balbi ba...@ti.com
Cc: Greg Kroah-Hartman gre...@linuxfoundation.org
Cc: linux-...@vger.kernel.org
Cc: linux-ker...@vger.kernel.org
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
drivers/usb/phy/phy-msm
From: Ivan T. Ivanov iiva...@mm-sol.com
This fixes checkpatch.pl warnings.
Cc: Felipe Balbi ba...@ti.com
Cc: Greg Kroah-Hartman gre...@linuxfoundation.org
Cc: linux-...@vger.kernel.org
Cc: linux-ker...@vger.kernel.org
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
drivers/usb/phy/phy-msm
From: Ivan T. Ivanov iiva...@mm-sol.com
Following patches make initial cleanup of usb phy found in the Qualcomm
chipsets. Changes include:
* Build time error fix.
* Move driver to Managed Device Resource allocation.
* Checkpatch warnings and error fixes
* Removed usage of global regulators
From: Ivan T. Ivanov iiva...@mm-sol.com
This patch fix compilation error and is an intermediate step
before the addition of DeviceTree support for newer targets.
Fix suggested here: https://lkml.org/lkml/2013/6/19/381
Cc: David Brown dav...@codeaurora.org
Cc: Daniel Walker dwal...@fifo99.com
Cc
From: Ivan T. Ivanov iiva...@mm-sol.com
This patch move global regulators variables to driver state
structire and move allocation of the regulators to be devm managed.
Cc: Felipe Balbi ba...@ti.com
Cc: Greg Kroah-Hartman gre...@linuxfoundation.org
Cc: linux-...@vger.kernel.org
Cc: linux-ker
From: Ivan T. Ivanov iiva...@mm-sol.com
Whether regulators are available or not is checked at driver
probe. If they are not available driver will refuse to load,
so no need to check them again.
Cc: Felipe Balbi ba...@ti.com
Cc: Greg Kroah-Hartman gre...@linuxfoundation.org
Cc: linux
Hi Stephen,
On Tue, 2013-06-18 at 17:04 -0700, Stephen Boyd wrote:
The DT based MSM platforms can join the multi-platform builds, so
introduce a DT based ARCH_MSM option. This option allows DT based
MSM platforms to be built into the multi-platform kernel. Also
introduce a hidden ARCH_MSM
From: Ivan T. Ivanov iiva...@mm-sol.com
This is a tty driver with console support for Qualcomm's UART
controllers found in the MSM8974 chipsets. Driver is completely
based on implementation found in codeaurora.org msm_serial_hs_lite
with Android dependences removed. Other changes include, moved
From: Ivan T. Ivanov iiva...@mm-sol.com
Changes since first version.
* Extend commit messages a little bit.
Following patches make initial cleanup of usb phy found in the Qualcomm
chipsets. Changes include:
* Build time error fix.
* Move driver to Managed Device Resource allocation.
* Checkpatch
From: Ivan T. Ivanov iiva...@mm-sol.com
This patch move global regulators variables to driver state
structire and move allocation of the regulators to be devm managed.
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
drivers/usb/phy/phy-msm-usb.c | 111
From: Ivan T. Ivanov iiva...@mm-sol.com
Use managed device resources to clean up the probe/remove
and get DT support for free.
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
drivers/usb/phy/phy-msm-usb.c | 78 +++--
1 file changed, 20 insertions
From: Ivan T. Ivanov iiva...@mm-sol.com
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
drivers/usb/phy/phy-msm-usb.c | 99 ++---
1 file changed, 52 insertions(+), 47 deletions(-)
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm
From: Ivan T. Ivanov iiva...@mm-sol.com
This fixes checkpatch.pl warnings.
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
drivers/usb/phy/phy-msm-usb.c | 33 +++--
1 file changed, 11 insertions(+), 22 deletions(-)
diff --git a/drivers/usb/phy/phy-msm-usb.c b
From: Ivan T. Ivanov iiva...@mm-sol.com
This fixes checkpatch.pl warnings.
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
drivers/usb/phy/phy-msm-usb.c |6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm
From: Ivan T. Ivanov iiva...@mm-sol.com
This patch fix compilation error and is an intermediate step
before the addition of DeviceTree support for newer targets.
Fix suggested here: https://lkml.org/lkml/2013/6/19/381
Cc: David Brown dav...@codeaurora.org
Cc: Daniel Walker dwal...@fifo99.com
Cc
Hi Greg,
On Mon, 2013-07-01 at 12:11 +0300, Ivan T. Ivanov wrote:
From: Ivan T. Ivanov iiva...@mm-sol.com
This is a tty driver with console support for Qualcomm's UART
controllers found in the MSM8974 chipsets. Driver is completely
based on implementation found in codeaurora.org
Hi Kumar,
On Tue, 2013-07-16 at 15:17 -0500, Kumar Gala wrote:
On Jul 1, 2013, at 4:11 AM, Ivan T. Ivanov wrote:
From: Ivan T. Ivanov iiva...@mm-sol.com
This is a tty driver with console support for Qualcomm's UART
controllers found in the MSM8974 chipsets. Driver is completely
On Wed, 2013-07-17 at 13:34 +0800, Wei Yongjun wrote:
From: Wei Yongjun yongjun_...@trendmicro.com.cn
Add the missing iounmap() before return from msm_request_port()
in the error handling case.
Reviewed-by: Ivan T. Ivanov iiva...@mm-sol.com
Regards,
Ivan
Signed-off-by: Wei Yongjun
From: Ivan T. Ivanov iiva...@mm-sol.com
This is a tty driver with console support for Qualcomm's UART
controllers found in the MSM8974 chipsets. Driver is completely
based on implementation found in codeaurora.org msm_serial_hs_lite
with Android dependences removed. Other changes include, moved
Hi,
On Wed, 2013-07-24 at 15:22 +0300, Felipe Balbi wrote:
On Mon, Jun 24, 2013 at 06:27:44PM +0300, Ivan T. Ivanov wrote:
From: Ivan T. Ivanov iiva...@mm-sol.com
Cc: Felipe Balbi ba...@ti.com
Cc: Greg Kroah-Hartman gre...@linuxfoundation.org
Cc: linux-...@vger.kernel.org
Cc
Hi,
On Wed, 2013-07-24 at 15:38 +0300, Felipe Balbi wrote:
Hi,
On Tue, Jul 09, 2013 at 06:47:08PM +0300, Ivan T. Ivanov wrote:
From: Ivan T. Ivanov iiva...@mm-sol.com
Use managed device resources to clean up the probe/remove
and get DT support for free.
Signed-off-by: Ivan T
On Wed, 2013-07-24 at 15:39 +0300, Felipe Balbi wrote:
On Tue, Jul 09, 2013 at 06:47:09PM +0300, Ivan T. Ivanov wrote:
From: Ivan T. Ivanov iiva...@mm-sol.com
This patch move global regulators variables to driver state
structire and move allocation of the regulators to be devm managed
On Wed, 2013-07-24 at 08:55 -0700, David Brown wrote:
On Mon, Jun 24, 2013 at 06:27:38PM +0300, Ivan T. Ivanov wrote:
From: Ivan T. Ivanov iiva...@mm-sol.com
This patch fix compilation error and is an intermediate step
before the addition of DeviceTree support for newer targets.
Fix
Hi Felipe,
On Thu, 2013-07-25 at 16:43 +0300, Ivan T. Ivanov wrote:
On Wed, 2013-07-24 at 15:39 +0300, Felipe Balbi wrote:
On Tue, Jul 09, 2013 at 06:47:09PM +0300, Ivan T. Ivanov wrote:
From: Ivan T. Ivanov iiva...@mm-sol.com
This patch move global regulators variables to driver
1 character at a time on UARTDM
Thanks, It is working on 8074 based DragonBoard.
Tested-by: Ivan T. Ivanov iiva...@mm-sol.com
drivers/tty/serial/msm_serial.c | 180
drivers/tty/serial/msm_serial.h | 19 ++---
2 files changed, 97 insertions
Hi David,
On Fri, 2013-07-26 at 14:50 -0700, David Brown wrote:
On Mon, Jul 22, 2013 at 10:05:48AM +0300, Ivan T. Ivanov wrote:
From: Ivan T. Ivanov iiva...@mm-sol.com
This is a tty driver with console support for Qualcomm's UART
controllers found in the MSM8974 chipsets. Driver
Hi,
On Mon, 2013-07-29 at 15:28 -0700, Abhimanyu Kapur wrote:
Add support for restart and poweroff functionality present on MSM
chipsets with the MPM2 ps-hold hardware.
Signed-off-by: Abhimanyu Kapur abhim...@codeaurora.org
---
.../bindings/power_supply/msm-poweroff.txt | 17
/power_supply/msm-poweroff.txt
create mode 100644 drivers/power/reset/msm-poweroff.c
Thank you, Could you next time add version in the subject line,
like PATH v2, it is easier to track changes.
Tested-by: Ivan T. Ivanov iiva...@mm-sol.com
Regards,
Ivan
--
To unsubscribe from this list: send
(+), 4 deletions(-)
create mode 100644 arch/arm/boot/dts/msm8974-db.dts
create mode 100644 arch/arm/mach-msm/board-dt-8974.c
Thanks.
Tested-by: Ivan T. Ivanov iiva...@mm-sol.com
Attached patch enables earlyprink for this board.
[920] booting linux @ 0x8000, ramdisk @ 0x200 (1067699), tags
From: Ivan T. Ivanov iiva...@mm-sol.com
Hi,
These patches add basic support for USB3.0 controllers found
on MSM platforms. USB3.0 core is based on Synopsys DesignWare
SuperSpeed IP.
Changes since first version:
* Split devicetree bindings description file to separate patch
* Address comments
From: Ivan T. Ivanov iiva...@mm-sol.com
DWC3 glue layer is hardware layer around Synopsys DesignWare
USB3 core. Its purpose is to supply Synopsys IP with required
clocks, voltages and interface it with the rest of the SoC.
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
drivers/usb/dwc3
From: Ivan T. Ivanov iiva...@mm-sol.com
MSM USB3.0 core wrapper consist of USB3.0 IP (SNPS)
and HS, SS PHY's controll and configuration registers.
It could operate in device mode (SS, HS, FS) and host
mode (SS, HS, FS, LS).
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
.../devicetree
From: Ivan T. Ivanov iiva...@mm-sol.com
These drivers handles control and configuration of the HS
and SS USB PHY transceivers. They are part of the driver
which manage Synopsys DesignWare USB3 controller stack
inside Qualcomm SoC's.
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
drivers
Hi,
On Fri, 2013-08-09 at 16:32 +0300, Felipe Balbi wrote:
On Fri, Aug 09, 2013 at 12:53:47PM +0300, Ivan T. Ivanov wrote:
From: Ivan T. Ivanov iiva...@mm-sol.com
DWC3 glue layer is hardware layer around Synopsys DesignWare
USB3 core. Its purpose is to supply Synopsys IP with required
Hi,
On Fri, 2013-08-09 at 10:31 -0500, Kumar Gala wrote:
On Aug 9, 2013, at 4:53 AM, Ivan T. Ivanov wrote:
From: Ivan T. Ivanov iiva...@mm-sol.com
MSM USB3.0 core wrapper consist of USB3.0 IP (SNPS)
probably good to spell out Synopsys rather than SNPS
I could make it look like
Hi,
On Mon, 2013-08-12 at 13:04 -0500, Felipe Balbi wrote:
On Fri, Aug 09, 2013 at 10:31:58AM -0500, Kumar Gala wrote:
On Aug 9, 2013, at 4:53 AM, Ivan T. Ivanov wrote:
From: Ivan T. Ivanov iiva...@mm-sol.com
MSM USB3.0 core wrapper consist of USB3.0 IP (SNPS)
probably
Hi,
On Tue, 2013-08-13 at 13:57 -0600, Stephen Warren wrote:
On 08/09/2013 03:53 AM, Ivan T. Ivanov wrote:
From: Ivan T. Ivanov iiva...@mm-sol.com
MSM USB3.0 core wrapper consist of USB3.0 IP (SNPS)
and HS, SS PHY's controll and configuration registers.
s/controll/control/
Thanks
From: Ivan T. Ivanov iiva...@mm-sol.com
DWC3 glue layer is hardware layer around Synopsys DesignWare
USB3 core. Its purpose is to supply Synopsys IP with required
clocks, voltages and interface it with the rest of the SoC.
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
drivers/usb/dwc3
From: Ivan T. Ivanov iiva...@mm-sol.com
Hi,
These patches add basic support for USB3.0 controllers found
on MSM platforms. USB3.0 core is based on Synopsys DesignWare
SuperSpeed IP.
Changes since v2:
* Several improvements in devicetree bindings description
* Disable regulators in glue layer
From: Ivan T. Ivanov iiva...@mm-sol.com
These drivers handles control and configuration of the HS
and SS USB PHY transceivers. They are part of the driver
which manage Synopsys DesignWare USB3 controller stack
inside Qualcomm SoC's.
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
drivers
From: Ivan T. Ivanov iiva...@mm-sol.com
MSM USB3.0 core wrapper consist of USB3.0 IP from Synopsys
(SNPS) and HS, SS PHY's control and configuration registers.
It could operate in device mode (SS, HS, FS) and host
mode (SS, HS, FS, LS).
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
Hi,
On Wed, 2013-08-14 at 09:20 -0500, Josh Cartwright wrote:
On Wed, Aug 14, 2013 at 03:59:42PM +0300, Ivan T. Ivanov wrote:
From: Ivan T. Ivanov iiva...@mm-sol.com
These drivers handles control and configuration of the HS
and SS USB PHY transceivers. They are part of the driver
On Wed, 2013-08-14 at 09:06 -0700, Stephen Boyd wrote:
On 08/14/13 05:59, Ivan T. Ivanov wrote:
+}
+
+static const struct of_device_id of_dwc3_matach[] = {
match? Maybe you can make it all one line too { .compatible = qcom,dwc3 }
Thanks. Will do.
Ivan
Hi Georgi,
I have several comments below.
On Tue, 2013-08-13 at 17:06 +0300, Georgi Djakov wrote:
This platform driver adds the support of Secure Digital Host
Controller Interface compliant controller in MSM chipsets.
CC: Asutosh Das asuto...@codeaurora.org
CC: Venkat Gopalakrishnan
Hi,
On Fri, 2013-08-16 at 16:44 -0600, Stephen Warren wrote:
On 08/14/2013 06:59 AM, Ivan T. Ivanov wrote:
From: Ivan T. Ivanov iiva...@mm-sol.com
MSM USB3.0 core wrapper consist of USB3.0 IP from Synopsys
(SNPS) and HS, SS PHY's control and configuration registers.
It could
From: Ivan T. Ivanov iiva...@mm-sol.com
DWC3 glue layer is hardware layer around Synopsys DesignWare
USB3 core. Its purpose is to supply Synopsys IP with required
clocks, voltages and interface it with the rest of the SoC.
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
drivers/usb/dwc3
From: Ivan T. Ivanov iiva...@mm-sol.com
Hi,
Here is fourth version of MSM USB3 drivers patches.
Changes since v3:
* Remove _clk suffix from clock names
* Clarify required child node for qcom,dwc3
* Fix comments in functions headers
* Use dbg instead err in drivers probe functions.
Changes
From: Ivan T. Ivanov iiva...@mm-sol.com
MSM USB3.0 core wrapper consist of USB3.0 IP from Synopsys
(SNPS) and HS, SS PHY's control and configuration registers.
It could operate in device mode (SS, HS, FS) and host
mode (SS, HS, FS, LS).
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
From: Ivan T. Ivanov iiva...@mm-sol.com
These drivers handles control and configuration of the HS
and SS USB PHY transceivers. They are part of the driver
which manage Synopsys DesignWare USB3 controller stack
inside Qualcomm SoC's.
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
drivers
Hi,
On Tue, 2013-08-20 at 08:37 -0500, Felipe Balbi wrote:
Hi,
On Tue, Aug 20, 2013 at 04:32:23PM +0300, Ivan T. Ivanov wrote:
On Tue, Aug 20, 2013 at 12:56:04PM +0300, Ivan T. Ivanov wrote:
From: Ivan T. Ivanov iiva...@mm-sol.com
These drivers handles control
Hi,
On Tue, 2013-08-20 at 09:33 -0500, Felipe Balbi wrote:
On Tue, Aug 20, 2013 at 05:09:11PM +0300, Ivan T. Ivanov wrote:
Hi,
On Tue, 2013-08-20 at 08:37 -0500, Felipe Balbi wrote:
Hi,
On Tue, Aug 20, 2013 at 04:32:23PM +0300, Ivan T. Ivanov wrote:
On Tue, Aug 20, 2013
On Tue, 2013-08-20 at 10:01 -0500, Kumar Gala wrote:
On Aug 20, 2013, at 9:54 AM, Ivan T. Ivanov wrote:
Hi,
On Tue, 2013-08-20 at 09:33 -0500, Felipe Balbi wrote:
On Tue, Aug 20, 2013 at 05:09:11PM +0300, Ivan T. Ivanov wrote:
Hi,
On Tue, 2013-08-20 at 08:37 -0500, Felipe
From: Ivan T. Ivanov iiva...@mm-sol.com
MSM USB3.0 core wrapper consist of USB3.0 IP from Synopsys
(SNPS) and HS, SS PHY's control and configuration registers.
It could operate in device mode (SS, HS, FS) and host
mode (SS, HS, FS, LS).
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
From: Ivan T. Ivanov iiva...@mm-sol.com
DWC3 glue layer is hardware layer around Synopsys DesignWare
USB3 core. Its purpose is to supply Synopsys IP with required
clocks, voltages and interface it with the rest of the SoC.
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
drivers/usb/dwc3
From: Ivan T. Ivanov iiva...@mm-sol.com
Hi,
Here is fifth version of MSM USB3 drivers patches.
Changes since v4:
* Substitute references to wc3 with just dw in USB PHY drivers and
file names. This is to indicate that the PHY's are DesignWare, but
not necessarily related to DWC3 IP core
From: Ivan T. Ivanov iiva...@mm-sol.com
These drivers handles control and configuration of the HS
and SS USB PHY transceivers. They are part of the driver
which manage Synopsys DesignWare USB3 controller stack
inside Qualcomm SoC's.
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
drivers
Hi Georgi,
On Tue, 2013-08-20 at 19:44 +0300, Georgi Djakov wrote:
This platform driver adds the support of Secure Digital Host
Controller Interface compliant controller in MSM chipsets.
CC: Asutosh Das asuto...@codeaurora.org
CC: Venkat Gopalakrishnan venk...@codeaurora.org
CC: Sahitya
From: Ivan T. Ivanov iiva...@mm-sol.com
The Qualcomm Universal Peripherial (QUP) wraps I2C mini-core and
provide input and output FIFO's for it. I2C controller can operate
as master with supported bus speeds of 100Kbps and 400Kbps.
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
Hi Kumar,
On Thu, 2013-08-29 at 10:28 -0500, Kumar Gala wrote:
On Aug 29, 2013, at 8:27 AM, Ivan T. Ivanov wrote:
From: Ivan T. Ivanov iiva...@mm-sol.com
The Qualcomm Universal Peripherial (QUP) wraps I2C mini-core and
provide input and output FIFO's for it. I2C controller can operate
On Thu, 2013-08-22 at 15:41 -0500, Felipe Balbi wrote:
On Wed, Aug 21, 2013 at 10:13:28AM -0500, Kumar Gala wrote:
On Aug 21, 2013, at 8:06 AM, Ivan T. Ivanov wrote:
On Tue, 2013-08-20 at 18:01 +0100, Pawel Moll wrote:
On Tue, 2013-08-20 at 16:06 +0100, Pawel Moll wrote:
On Tue
Hi Kumar,
On Fri, 2013-08-30 at 10:21 -0500, Kumar Gala wrote:
On Aug 29, 2013, at 12:26 PM, Ivan T. Ivanov wrote:
snip
+
+Optional properties :
+ - Child nodes conforming to i2c bus binding
+ - clock-frequency : Desired I2C bus clock frequency in Hz. If
+ not set
Hi,
On Tue, 2013-09-10 at 08:59 -0500, Josh Cartwright wrote:
[Hmm. Fixing b0rked LKML address; that might explain why I am not
seeing Kumar's replies.]
Yes, sorry about this.
On Tue, Sep 10, 2013 at 03:08:57PM +0300, Ivan T. Ivanov wrote:
Hi Kumar,
On Fri, 2013-08-30 at 10:21
Hi,
On Tue, 2013-09-10 at 10:36 -0500, Josh Cartwright wrote:
On Tue, Sep 10, 2013 at 06:10:56PM +0300, Ivan T. Ivanov wrote:
On Tue, 2013-09-10 at 08:46 -0500, Josh Cartwright wrote:
Hey Ivan-
Some nits below.
On Thu, Aug 29, 2013 at 04:27:53PM +0300, Ivan T. Ivanov wrote
Hi,
On Wed, 2013-09-11 at 13:12 -0500, Josh Cartwright wrote:
Hey Ivan-
On Tue, Aug 06, 2013 at 12:14:46PM +0300, Ivan T. Ivanov wrote:
[..]
Enable low-level debug print routines to direct their
output to the serial port on MSM 8974 devices.
Signed-off-by: Ivan T. Ivanov iiva
Hi,
On Wed, 2013-09-11 at 11:00 -0700, David Brown wrote:
On Tue, Aug 06, 2013 at 12:14:46PM +0300, Ivan T. Ivanov wrote:
Attached patch enables earlyprink for this board.
[920] booting linux @ 0x8000, ramdisk @ 0x200 (1067699), tags/device
tree @ 0x1e0
Uncompressing Linux
On Thu, 2013-09-12 at 09:34 -0700, Rohit Vaswani wrote:
On 9/12/2013 7:05 AM, Ivan T. Ivanov wrote:
Hi,
On Wed, 2013-09-11 at 11:00 -0700, David Brown wrote:
On Tue, Aug 06, 2013 at 12:14:46PM +0300, Ivan T. Ivanov wrote:
Attached patch enables earlyprink for this board.
[920
Hi Mark,
On Thu, 2013-09-12 at 17:28 +0100, Mark Rutland wrote:
On Thu, Aug 29, 2013 at 02:27:52PM +0100, Ivan T. Ivanov wrote:
From: Ivan T. Ivanov iiva...@mm-sol.com
The Qualcomm Universal Peripherial (QUP) wraps I2C mini-core and
provide input and output FIFO's for it. I2C
Hi Georgi,
Several comments bellow.
On Thu, 2013-09-12 at 17:56 +0300, Georgi Djakov wrote:
This platform driver adds the support of Secure Digital Host Controller
Interface compliant controller found in Qualcomm MSM chipsets.
CC: Asutosh Das asuto...@codeaurora.org
CC: Venkat
Hi Mark,
On Mon, 2013-09-16 at 14:32 +0100, Mark Rutland wrote:
On Fri, Sep 13, 2013 at 10:13:15AM +0100, Ivan T. Ivanov wrote:
Hi Mark,
On Thu, 2013-09-12 at 17:28 +0100, Mark Rutland wrote:
On Thu, Aug 29, 2013 at 02:27:52PM +0100, Ivan T. Ivanov wrote:
From: Ivan T. Ivanov
Hi,
On Wed, 2013-09-25 at 18:06 +0200, Wolfram Sang wrote:
I agree with Kumar on removing this. If we decide it is something worth
keeping, logic to support it doesn't belong in the QUP driver, but in
the i2c core.
I don't have strong objection here, will remove aliases support.
Hi,
On Mon, 2013-09-23 at 14:31 -0500, Felipe Balbi wrote:
Hi,
On Tue, Aug 20, 2013 at 12:56:03PM +0300, Ivan T. Ivanov wrote:
From: Ivan T. Ivanov iiva...@mm-sol.com
MSM USB3.0 core wrapper consist of USB3.0 IP from Synopsys
(SNPS) and HS, SS PHY's control and configuration
Hi,
On Mon, 2013-09-23 at 16:03 -0600, Stephen Warren wrote:
On 09/23/2013 01:32 PM, Felipe Balbi wrote:
Hi,
On Wed, Aug 21, 2013 at 04:29:44PM +0300, Ivan T. Ivanov wrote:
From: Ivan T. Ivanov iiva...@mm-sol.com
MSM USB3.0 core wrapper consist of USB3.0 IP from Synopsys (SNPS
Hi Rohit,
On Thu, 2013-10-03 at 16:05 -0700, Rohit Vaswani wrote:
This patch adds basic board support for APQ8074 Dragonboard
which belongs to the Snapdragon 800 family.
For now, just support a basic machine with device tree.
Signed-off-by: Rohit Vaswani rvasw...@codeaurora.org
---
From: Ivan T. Ivanov iiva...@mm-sol.com
MSM USB3.0 core wrapper consist of USB3.0 IP from Synopsys
(SNPS) and HS, SS PHY's control and configuration registers.
It could operate in device mode (SS, HS, FS) and host
mode (SS, HS, FS, LS).
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
Acked
Hi Felipe,
On Fri, 2013-10-04 at 09:31 -0500, Felipe Balbi wrote:
On Wed, Aug 21, 2013 at 04:29:44PM +0300, Ivan T. Ivanov wrote:
From: Ivan T. Ivanov iiva...@mm-sol.com
MSM USB3.0 core wrapper consist of USB3.0 IP from Synopsys
(SNPS) and HS, SS PHY's control and configuration
Hi Stan,
On Mon, 2013-10-07 at 12:22 +0300, Stanimir Varbanov wrote:
Hi Ivan,
Few comments below.
On 10/07/2013 10:44 AM, Ivan T. Ivanov wrote:
From: Ivan T. Ivanov iiva...@mm-sol.com
These drivers handles control and configuration of the HS
and SS USB PHY transceivers
Hi Stan,
On Mon, 2013-10-07 at 12:28 +0300, Stanimir Varbanov wrote:
Hi Ivan,
Minor comments below.
On 10/07/2013 10:44 AM, Ivan T. Ivanov wrote:
From: Ivan T. Ivanov iiva...@mm-sol.com
DWC3 glue layer is hardware layer around Synopsys DesignWare
USB3 core. Its purpose
From: Ivan T. Ivanov iiva...@mm-sol.com
Allows MSM EHCI controller to be specified via device tree.
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
.../devicetree/bindings/usb/msm-hsusb.txt | 17 +
drivers/usb/host/ehci-msm.c| 15
From: Ivan T. Ivanov iiva...@mm-sol.com
Use struct usb_hcd::phy to hold USB PHY instance.
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
drivers/usb/host/ehci-msm.c |5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host
From: Ivan T. Ivanov iiva...@mm-sol.com
Whether regulators are available or not is checked at driver
probe. If they are not available driver will refuse to load,
so no need to check them again.
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
drivers/usb/phy/phy-msm-usb.c | 10
From: Ivan T. Ivanov iiva...@mm-sol.com
Allows MSM OTG controller to be specified via device tree.
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
.../devicetree/bindings/usb/msm-hsusb.txt | 58 +++
drivers/usb/phy/phy-msm-usb.c | 59
From: Ivan T. Ivanov iiva...@mm-sol.com
This patch fix compilation error and is an intermediate step
before the addition of DeviceTree support for newer targets.
Cc: David Brown dav...@codeaurora.org
Cc: Daniel Walker dwal...@fifo99.com
Cc: Felipe Balbi ba...@ti.com
Cc: Greg Kroah-Hartman gre
From: Ivan T. Ivanov iiva...@mm-sol.com
IRQ with number 0 is valid case, so check for negative
numbers instead.
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
drivers/usb/phy/phy-msm-usb.c |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/phy/phy-msm-usb.c
From: Ivan T. Ivanov iiva...@mm-sol.com
Replace the USB specific clock names in driver
with the more standard 'core' and 'iface' ... names.
Cc: David Brown dav...@codeaurora.org
Cc: Stephen Boyd sb...@codeaurora.org
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
arch/arm/mach-msm/devices
From: Ivan T. Ivanov iiva...@mm-sol.com
There are no references to 'pclk_src_name' in plaform code,
so it is unused.
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
drivers/usb/phy/phy-msm-usb.c | 26 +-
include/linux/usb/msm_hsusb.h |5 -
2 files changed
From: Ivan T. Ivanov iiva...@mm-sol.com
This fixes checkpatch.pl warnings.
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
drivers/usb/phy/phy-msm-usb.c | 33 +++--
1 file changed, 11 insertions(+), 22 deletions(-)
diff --git a/drivers/usb/phy/phy-msm-usb.c b
From: Ivan T. Ivanov iiva...@mm-sol.com
Move memory, regulators, clocks and irq allocation to
devm_* variants. Properly check for valid clk handles.
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
drivers/usb/phy/phy-msm-usb.c | 192 -
1 file
From: Ivan T. Ivanov iiva...@mm-sol.com
This fixes checkpatch.pl warnings.
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
drivers/usb/phy/phy-msm-usb.c |6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm
From: Ivan T. Ivanov iiva...@mm-sol.com
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
drivers/usb/phy/phy-msm-usb.c | 82 -
include/linux/usb/msm_hsusb.h |3 ++
2 files changed, 42 insertions(+), 43 deletions(-)
diff --git a/drivers/usb/phy
From: Ivan T. Ivanov iiva...@mm-sol.com
USB DT bindings states: ...In case this attribute isn't
passed via DT, USB DRD controllers should default to OTG...,
so remove redundand field.
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
drivers/usb/phy/phy-msm-usb.c |7 ---
include
From: Ivan T. Ivanov iiva...@mm-sol.com
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
arch/arm/mach-msm/board-msm7x30.c |2 +-
arch/arm/mach-msm/board-qsd8x50.c |2 +-
drivers/usb/phy/phy-msm-usb.c | 40 ++---
include/linux/usb/msm_hsusb.h
From: Ivan T. Ivanov iiva...@mm-sol.com
Hi,
This is third version of MSM OTG clean up patches.
v3
--
* In patch 1 - functions for reseting PHY and LINK controller just
call platform code if available.
* New stuff is: cleaning up unneeded/unused driver state variables
* Simplified regulator
On Mon, 2013-10-14 at 17:52 -0500, Felipe Balbi wrote:
Hi,
On Mon, Oct 14, 2013 at 06:24:28PM +0300, Ivan T. Ivanov wrote:
From: Ivan T. Ivanov iiva...@mm-sol.com
This patch fix compilation error and is an intermediate step
before the addition of DeviceTree support for newer targets
On Mon, 2013-10-14 at 17:59 -0500, Felipe Balbi wrote:
On Mon, Oct 14, 2013 at 06:24:39PM +0300, Ivan T. Ivanov wrote:
From: Ivan T. Ivanov iiva...@mm-sol.com
IRQ with number 0 is valid case, so check for negative
not entirelly correct... IRQ 0 isn't supposed to be used as a linux IRQ
Hi Josh,
On Mon, 2013-10-28 at 13:12 -0500, Josh Cartwright wrote:
Signed-off-by: Josh Cartwright jo...@codeaurora.org
---
.../bindings/spmi/qcom,spmi-pmic-arb.txt | 42
++
1 file changed, 42 insertions(+)
create mode 100644
Hi Josh,
On Mon, 2013-10-28 at 13:12 -0500, Josh Cartwright wrote:
Document the bindings used to describe the Qualcomm 8x41 PMICs.
Signed-off-by: Josh Cartwright jo...@codeaurora.org
---
Documentation/devicetree/bindings/mfd/pm8x41.txt | 33
1 file changed, 33
Hi,
On Tue, 2013-10-29 at 10:05 -0500, Josh Cartwright wrote:
On Tue, Oct 29, 2013 at 04:18:35PM +0200, Ivan T. Ivanov wrote:
On Mon, 2013-10-28 at 13:12 -0500, Josh Cartwright wrote:
Document the bindings used to describe the Qualcomm 8x41 PMICs.
Signed-off-by: Josh Cartwright jo
1 - 100 of 569 matches
Mail list logo
