Dominik Kuhlen wrote:
Hi,
The attached pctv452e.c works for me without frame drops in DVB-S and DVB-S2.
On Friday 29 February 2008, Manu Abraham wrote:
Dominik Kuhlen wrote:
On Friday 22 February 2008, Dominik Kuhlen wrote:
Hi,
-snip
Great, that was the trick, now scanning
manu wrote:
On 03/11/2008 02:27:31 AM, Vladimir Prudnikov wrote:
I'm getting late buffers with vlc on some transponders (DVB-S, same
parameters, good signal guaranteed) while everything is fine with
others. Using multiproto and TT S2-3200.
Anyone having same problems?
Can you give the
Tim Hewett wrote:
Simeon,
It doesn't matter re: the diseqc commands, with no switch present will
be nothing listening, assuming there is nothing else connected such as
a rotor.
The SEC equipment should work fine AFAICS. The bad aspect of the tests
were that no one really came up with
to be specific to your setup/machine.
Regards,
Manu
Thanks for your help,
Simeon
- Original Message
From: Manu Abraham [EMAIL PROTECTED]
To: Simeon Simeonov [EMAIL PROTECTED]
Cc: linux-dvb@linuxtv.org
Sent: Monday, March 3, 2008 3:52:29 AM
Subject: Re: [linux-dvb] STB0899
manu wrote:
On 03/06/2008 06:34:28 AM, Vladimir Prudnikov wrote:
Can't get TT S2-3200 locked on high SR transponders. I have seen a
lot
of suggestions regarding changing Frequency/Symbol rate on various
forums but no luck. Low SR are fine.
Does anyone have a revision of multiproto that
Florian Lohoff wrote:
On Mon, Mar 03, 2008 at 04:22:00AM +0400, Manu Abraham wrote:
This won't work. params will contain data only after you have
successfully issued
SET_PARAMS not before. For SET_PARAMS to work, you need the delivery system
cached for the operation.
As i already wrote
too (i
had some doubts, but when you said it worked with some other card, then i
don't see the issue in here with the diseqc part. The FiFO either works
or not)
- Original Message
From: Manu Abraham [EMAIL PROTECTED]
To: Simeon Simeonov [EMAIL PROTECTED]
Cc: linux-dvb@linuxtv.org
Florian Lohoff wrote:
On Mon, Mar 03, 2008 at 03:09:23PM +0400, Manu Abraham wrote:
As i already wrote - SET_PARAMS is _NOT_ enough. Please try yourself.
Unload/Load the module and simple issue a DVBFE_SET_PARAMS (NOT
GET_INFO) and it doesnt tune/lock at least for STB0899 and it also
Florian Lohoff wrote:
On Mon, Mar 03, 2008 at 04:03:09PM +0400, Manu Abraham wrote:
- make SET_PARAMS the call to honor delivery in dvbfe_params and remove
the setting of the delivery of GET_INFO
I'd prefere the 2nd option because currently the usage and naming
is an incoherent mess which
Manu Abraham wrote:
Florian Lohoff wrote:
On Mon, Mar 03, 2008 at 04:03:09PM +0400, Manu Abraham wrote:
- make SET_PARAMS the call to honor delivery in dvbfe_params and remove
the setting of the delivery of GET_INFO
I'd prefere the 2nd option because currently the usage and naming
Florian Lohoff wrote:
On Mon, Mar 03, 2008 at 05:49:53PM +0400, Manu Abraham wrote:
Basically you seem to get the wrong end, (it's one whole line, no corners
to it) since you think that it all starts with a tune operation. No, a tune
operation is not the first operation that's to be done
Florian Lohoff wrote:
On Mon, Mar 03, 2008 at 06:17:58PM +0400, Manu Abraham wrote:
You mean tune and then check if there is a SIGNAL and possibly a LOCK? I
do that yes ... But first comes the tune - On an uninitialized state of
a demod/tuner i would not expect to see any signal.
How do you
Florian Lohoff wrote:
On Mon, Mar 03, 2008 at 06:04:12PM +0400, Manu Abraham wrote:
The more important part is to first check for a signal, before
attempting a tune.
Lack of doing so, will result in a lot of frustration in many cases.
Though it is completely upto oneself whether to do
David BERCOT wrote:
Hi,
Before buying a new CI for my TT S2-3200, I'd like to know if it is
really broken...
After the installation of multiproto, I have this error :
saa7146: register extension 'budget_ci dvb'.
ACPI: PCI Interrupt :05:01.0[A] - GSI 22 (level, low) - IRQ 22
saa7146:
Simeon Simeonov wrote:
Hi Manu,
I am attaching two gzipped logs. They are supposed to tune to the same
frequency using the tip
of Mantis tree. The difference between the two are that in the GOOD log no
repeat command is used
and in the BAD log one repeat for the switch is issued. The
Florian Lohoff wrote:
Hi,
i was wondering why i have a problem in my application that i need to
run scan once after loading the module, otherwise my DVBFE_SET_PARAMS
fails - I couldnt explain it until i looked into the kernel code - In
the dvb_frontend.c i see this code:
1738 case
e9hack wrote:
Rikard Wissing schrieb:
[ 4022.656841] mantis_frontend_init (0): Probing for CU1216 (DVB-C)
[ 4022.658236] TDA10021: i2c-addr = 0x0c, id = 0x7d
[ 4022.658238] mantis_frontend_init (0): found Philips CU1216 DVB-C frontend
(TDA10021) @ 0x0c
[ 4022.658240] mantis_frontend_init
André Weidemann wrote:
Note:
Manu's code in changeset 7207 seems to have broken tuning for this
device. Changesets 7202 to 7205 are still working.
Cool, thanks for testing. Still need to figure out why deselecting
puncture rates
doesn't work as expected. Have pulled out the offending
Florian Lohoff wrote:
Hi,
This is
why my application, which did not issue a GET_INFO but rather set the
delivery system in the dvbfeparam, failed. The delivery in the
..
- A GET or READ call should never ever alter state - otherwise it should be
named
different. Its the same with
Dominik Kuhlen wrote:
On Friday 22 February 2008, Dominik Kuhlen wrote:
Hi,
-snip
Great, that was the trick, now scanning and szap work fine.
Thanks for that hint!
You're welcome.
BTW: do you receive broken streams (symbol rate 22000 or 27500)?
Currently I get a loss of about 1
Seppo Ingalsuo wrote:
Simeon Simeonov wrote:
Did you try changing line 250 in mantis_dvb.c to:
if (!lnbp21_attach(mantis-fe, mantis-adapter, LNBP21_PCL,
LNBP21_ISEL)) {
I tried mantis-a9ecd19a37c9. Without the change success in positioning
was about 0% similarly as with
with the LNBP21 attach change ?
Regards,
Manu
- Original Message
From: Manu Abraham [EMAIL PROTECTED]
To: Simeon Simeonov [EMAIL PROTECTED]
Cc: linux-dvb@linuxtv.org
Sent: Thursday, February 28, 2008 1:29:55 AM
Subject: Re: [linux-dvb] STB0899 users, please verify results was Re
Simeon Simeonov wrote:
I am using VP-1041 with the lnb21_attach changes to the ISEL and PCL bit
settings.
At the moemnt I have no clue why I am having this diseqc issue. I also
checked the
logs and I see from time to time diseqc_fifo_full messages but there is no
correlation
with the
Simeon Simeonov wrote:
I don't know if is the same but with the latest mantis tree I get 100%
success.
Reverting to changeset mantis-100d4b009238 (which I think corresponds to
multiproto 7200)
I do NOT any locks on the same transponder.
For the mantis tree, please test this changeset: 7275
Zaheer Merali wrote:
So we don't take the whole multiplex into userspace, just the pids we
need on an as needed basis.
Though this will work for FTA streams, it won't work for scrambled streams.
Regards,
Manu
___
linux-dvb mailing list
-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Manu Abraham
Sent: Dienstag, 26. Februar 2008 22:45
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] STB0899 users, please verify results was Re:
TechniSat SkyStar HD: Problems scaning and zaping
Vangelis Nonas wrote:
Hello
Michael Curtis wrote:
Can anyone help with this please?
Disable that relevant module by using a custom config, such as
using make menuconfig, or make xconfig or whatever.
Regards,
Manu
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michael Curtis
André Weidemann wrote:
Dominik Kuhlen wrote:
Hi all,
Manus multiproto HG tree (jusst.de/hg/multiproto) and the attached
patch make the pctv452e work with DVB-S2 and DVB-S :)
Hi all,
I took Dominiks patch and added support for the TT connect S2-3600.
The S2-3600 is tuning to DVB-S and
Vangelis Nonas wrote:
Hello,
Here is the output of hg log|head -n 5 for two different directories
(multiproto and multiproto_7200)
for multiproto:
changeset: 7205:9bdb997e38b5
tag: tip
user:Manu Abraham [EMAIL PROTECTED]
date:Sun Feb 24 02:10:56 2008 +0400
Simeon Simeonov wrote:
Hi Manu,
Thanks for the reply
Yes, indeed I tried over the weekend and by selecting the higher limitation
by ISEL register:
if (!lnbp21_attach(mantis-fe, mantis-adapter, 0, 0x40)) {
My rotor now moves. Do you think it is better to use static current
Vangelis Nonas wrote:
Hello,
I have tested again changesets 7201 and 7205 with verbose 5, 2 and 1
scanning 101 transponders on Hotbird (I attach my transponders file --
it is taken and adopted from ProgDvb).
Here are my statistics:
Changeset Verbose channels
Artem Makhutov wrote:
Hi,
On Sun, Feb 24, 2008 at 02:18:52AM +0400, Manu Abraham wrote:
Also, can you please do a benchmark in lock timings between changeset
7205 and 7200 ?
Do you mean changeset 7200 or 7204
yep. 7205 is head, but just a minor change.
Regards,
Manu
Vangelis Nonas wrote:
Hello,
I tried scanning with the 7201 changeset and I believe the results are
better than the 7205 changeset. In the former case I get 2082 services
on hotbird, in the latter 1722.
Hmm.. Ok.
Can you please get 7205 and load the stb0899 and stb6100 modules with
Tim Hewett wrote:
Manu,
The Diseqc switch has been removed and now all polarities tune, and
DVB-S2 works as well.
Bad diseqc switch ?
Regards,
Manu
Thanks!
Tim.
On 24 Feb 2008, at 00:38, Manu Abraham wrote:
Tim Hewett wrote:
Manu,
Thanks, it now tunes to horizontal
Artem Makhutov wrote:
Hi,
On Sun, Feb 24, 2008 at 05:52:39PM +0400, Manu Abraham wrote:
Artem Makhutov wrote:
Hi,
On Sun, Feb 24, 2008 at 02:18:52AM +0400, Manu Abraham wrote:
Also, can you please do a benchmark in lock timings between changeset
7205 and 7200 ?
Do you mean changeset
you compare with the start - stop
events in the logs.
Should you need kernel logs for failing transponders either 7201 or 7205
let me know.
Will need the logs for the failing transponders in 7205, to check for the
actual cause.
Regards,
Manu
Regards
Vagelis
Manu Abraham wrote
Manu Abraham wrote:
Simeon Simeonov wrote:
Hi Gernot,
I can confirm that I have similar experience to yours.
By the way do you know if one can control from the soft side (register or
some other means)
the max current output for the card. I am having a problem when trying to
tune
Artem Makhutov wrote:
Hi,
On Sun, Feb 24, 2008 at 05:52:39PM +0400, Manu Abraham wrote:
Artem Makhutov wrote:
Hi,
On Sun, Feb 24, 2008 at 02:18:52AM +0400, Manu Abraham wrote:
Also, can you please do a benchmark in lock timings between changeset
7205 and 7200 ?
Do you mean changeset
Artem Makhutov wrote:
Hi,
On Sat, Feb 23, 2008 at 12:35:49PM +, Vangelis Nonas wrote:
My problems are:
- When I scan the same transponder more than once, sometimes I get some
services, sometimes I get no services.
I have never tried to scan with the SkyStar HD.
- When I zap (with
Artem Makhutov wrote:
Hi,
On Sun, Feb 24, 2008 at 12:21:17AM +0400, Manu Abraham wrote:
[...]
Can you guys please update from the multiproto tree and test again at
the earliest and give me your feedback ?
No, still the same:
Try: 50
Failes: 37
Tunes: 13
Maybe the problem
Artem Makhutov wrote:
Hi,
On Sat, Feb 23, 2008 at 10:32:58PM +0100, Artem Makhutov wrote:
On Sun, Feb 24, 2008 at 01:29:31AM +0400, Manu Abraham wrote:
Are you sure that you got the top level 2 changes changeset 7204 and 7203
respectively ?
Oh, I only got 7203. Will try with 7204 in a few
Manu Abraham wrote:
Artem Makhutov wrote:
Hi,
On Sat, Feb 23, 2008 at 10:32:58PM +0100, Artem Makhutov wrote:
On Sun, Feb 24, 2008 at 01:29:31AM +0400, Manu Abraham wrote:
Are you sure that you got the top level 2 changes changeset 7204 and 7203
respectively ?
Oh, I only got 7203. Will try
Tim Hewett wrote:
Gernot,
I have now tried the mantis tree. It also needed
the MANTIS_VP_1041_DVB_S2 #define to be changed to 0x0001 for this card,
but after doing that it was recognised:
Applied the ID's to the mantis tree alongwith some other
fixes/optimizations.
Please do test the
Tim Hewett wrote:
Manu,
I tried the changes, the card is now recognised at boot time without
needing any manual changes to the code.
However it now no longer tunes:
Sigh! missed out something while i carried forward something. I have
applied the fix to the tree just now. Please try
Manu Abraham wrote:
Manu Abraham wrote:
Artem Makhutov wrote:
Hi,
On Sat, Feb 23, 2008 at 10:32:58PM +0100, Artem Makhutov wrote:
On Sun, Feb 24, 2008 at 01:29:31AM +0400, Manu Abraham wrote:
Are you sure that you got the top level 2 changes changeset 7204
and 7203
Tim Hewett wrote:
Manu,
Thanks, it now tunes to horizontal transponders though not vertical
ones. I think others have been having similar symptoms with the
mantis/multiproto trees.
Can someone replicate this behaviour: not tuning to vertical transponders ?
Do you have any switches or a
CityK wrote:
James Klaas wrote:
On 2/21/08, CityK [EMAIL PROTECTED] wrote:
James Klaas wrote:
HD capture .. HDMI/component/composite
Whether it be done through an analog connection (eg. component) or
digital connection (eg. HDMI/DVI/SDI), it all falls under the realm of
the
CityK wrote:
Manu Abraham wrote:
CityK wrote:
To be specific, its because the DVB API is about the reception of a
Digital Video Broadcast, and those are made in form of a Transport
Stream modulated onto a RF carrier
DVB isn't completely about a RF carrier. It is used in the studios
Simeon Simeonov wrote:
Hi Gernot,
I can confirm that I have similar experience to yours.
By the way do you know if one can control from the soft side (register or
some other means)
the max current output for the card. I am having a problem when trying to
tune with a rotor.
On the Linux
Gernot Pansy wrote:
hy,
have you tried some other channel on a diffrent multiplex?
i have also troubles on 2 multiplexes, but i believe that's trough my bad
signal strength (it's the same on windows).
otherwise there have to be some initialization registers configured
differently.
hermann pitton wrote:
Hi.
If it stays like that, this will likely have some new owners soon,
but teach me better.
Unfortunately, i updated my mail filters which had tagged all your mails as
junk, to spam status.
Regards,
Manu
___
linux-dvb
Stefan Lucke wrote:
Hi,
with current mulproto driver from http://www.jusst.de/hg/multiproto/ I get
a reproducable segfault upon start of vdr :-( .
[ 248.480524] stb0899_i2c_gate_ctrl: Enabling I2C Repeater ...
[ 248.480526] stb0899_write_regs [0xf12a]: c8
[ 248.480790]
Jose Alberto Reguero wrote:
I have clone the wrong hg:
http://linuxtv.org/hg/~manu/multiproto/
http://www.jusst.de/hg/multiproto/ is ok.
I just pulled out some hair for a short while ;-)
Regards,
Manu
___
linux-dvb mailing list
Jose Alberto Reguero wrote:
I have two problems with the new multiproto tree:
1. The DVB_API_VERSION_MINOR is 2 like the v4l-dvb tree. Before was 3.
2. struct dvbs2_params has no member named 'rolloff'
Umm. from where did you see that ?
I see minor as 3, from here:
CityK wrote:
Manu Abraham wrote:
The comment was that this card is identical to the VP-2033, no
differences) True it is, the only difference is in the PCI Sub ID's.
The demod and the PLL is there at the same I2C addresses too. This was
verified from your logs, that the frontend attached
Hi all,
I have updated the multiproto tree and have brought it up to the v4l-dvb
head.
Obviously i haven't tested much after the merge, so please do test.
Maybe there
could be regressions too, though i have tried to be quite careful, so
please proceed
with a bit of caution, as well report any
Hi,
Dominik Kuhlen wrote:
Hi all,
Manus multiproto HG tree (jusst.de/hg/multiproto) and the attached patch make
the pctv452e work with DVB-S2 and DVB-S :)
Also the LED turns to green if the frontend is openend and turns back to
orange if released (thanks to manu for postproc interface
Johannes Stezenbach wrote:
dvb_dmx_swfilter was written to be used from hardirq
or softirq context. If it is called from a kernel thread,
the use of a spinlock is somewhat inappropriate.
Maybe you should talk to the lockdep guys to find out
what to do about this warning. Maybe a version of
David BERCOT wrote:
Hi,
I think the precedent object was not ok ;-)
Too many mails on the same subject.
So, I've installed multiproto for my TT S2-3200. I had a little error :
dvb_ca adaptor 0: PC card did not respond :(
Try these patches:
Tuomas Jousimaa wrote:
Now the only thing that comes to my mind is the CU1216 module is using a
newer TDA10023
instead of the TDA10021. (In case, if all your tests went in the right
direction)
Thanks! It is indeed using the TDA10023. I got it working by changing
tda10021_attach into
Tuomas Jousimaa wrote:
On Jan 24, 2008, at 9:28 PM, Manu Abraham wrote:
Tuomas Jousimaa wrote:
Now the only thing that comes to my mind is the CU1216 module is
using a
newer TDA10023
instead of the TDA10021. (In case, if all your tests went in the right
direction)
Thanks! It is indeed
[EMAIL PROTECTED] wrote:
Hi,
I am running a Hauppauge NOVA-S plus (cx2388x based card) and an older
technotrend S-1500 card in the same chassis. Trying to debug other problems I
have turned on lock debugging in the kernel and have started getting the
following dump when both cards are
Elmar van Ginneken wrote:
Manu Abraham wrote:
Hi all,
Can someone test whether the VP-2033 works from this
tree: http://jusst.de/hg/mantis
Regards,
Manu
Hi Manu,
I assume you mean the version dated Friday, November 30 2007. It works
with my Twinhan CAB-CI 2033 Mantis for the free
Hans Werner wrote:
Hi all,
Can someone test whether the VP-2033 works from this
tree: http://jusst.de/hg/mantis
Regards,
Manu
Sorry, I can't help with the VP-2033.
I was just wondering why the VP-1041 code is not in that tree. I know
working code exists. Is it possible to add
Tuomas Jousimaa wrote:
On Jan 21, 2008, at 9:52 PM, Manu Abraham wrote:
Tuomas Jousimaa wrote:
On Jan 17, 2008, at 8:21 PM, Manu Abraham wrote:
Tuomas Jousimaa wrote:
On Jan 17, 2008, at 7:45 PM, Manu Abraham wrote:
Tuomas Jousimaa wrote:
Hi
I just bought the new Terratec Cinergy C PCI
Hi all,
Can someone test whether the VP-2033 works from this
tree: http://jusst.de/hg/mantis
Regards,
Manu
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Tuomas Jousimaa wrote:
On Jan 17, 2008, at 8:21 PM, Manu Abraham wrote:
Tuomas Jousimaa wrote:
On Jan 17, 2008, at 7:45 PM, Manu Abraham wrote:
Tuomas Jousimaa wrote:
Hi
I just bought the new Terratec Cinergy C PCI -card. It would seem
that it isn't supported yet by any drivers
Trent Piepho wrote:
On Sun, 20 Jan 2008, Mauro Carvalho Chehab wrote:
On Sat, 19 Jan 2008 05:28:49 -0800 (PST)
Trent Piepho [EMAIL PROTECTED] wrote:
I wish people would use the patch creating system from Hg, since it would
the format mistakes evident in this patch.
1. no patch title
2.
Trent Piepho wrote:
On Sun, 20 Jan 2008, Akinobu Mita wrote:
+static const char * __devinit card_name(const struct pci_device_id *id)
+{
+ if (id = bt878_pci_tbl
+ id bt878_pci_tbl + ARRAY_SIZE(bt878_pci_tbl) - 1)
+ return (const char *)id-driver_data;
Are you sure
Tuomas Jousimaa wrote:
Hi
I just bought the new Terratec Cinergy C PCI -card. It would seem
that it isn't supported yet by any drivers. With Manus mantis-drivers
recognize the card, but the frontend doesn't work.
Please do a lspci -vvn and send the result.
Regards,
Manu
Tuomas Jousimaa wrote:
On Jan 17, 2008, at 7:45 PM, Manu Abraham wrote:
Tuomas Jousimaa wrote:
Hi
I just bought the new Terratec Cinergy C PCI -card. It would seem
that it isn't supported yet by any drivers. With Manus
mantis-drivers recognize the card, but the frontend doesn't work
Reinhard Nissl wrote:
Hi,
Morfsta schrieb:
Please report the debug output here for further investigation.
Attached are two files - tuning to the same DVB-T channel using either
system and the Philips frontend... vdr-1.4.x shows the channel fine,
1.5.12 does not.
Hope this helps and
Marco Coli wrote:
Remy Bohmer ha scritto:
Hello Marco,
Can you please post the results of lspci -v concerning your card? Maybe
mine has something different.
Thank you.
My lspci -v follows:
04:07.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem:
Marco Coli wrote:
Manu Abraham ha scritto:
Marco Coli wrote:
I think this can be a quick workaround in this situation also. I need to
examine budget-ci.c only?
Yes
So I did... Now, after the correct modeprobing of modules in correct
order ( stb6100,stb0899,lnbp21,budget_ci), I
Marco Coli wrote:
Manu Abraham ha scritto:
Marco Coli wrote:
well well well, mistery revealed!
For the developers: are you already aware of these differences? Do
you need more info? Is support for this board planned?
Well, it looks like you have a broken EEPROM.
0x13c2: 1019
Zdenek Kabelac wrote:
2008/1/1, Manu Abraham [EMAIL PROTECTED]:
Zdenek Kabelac wrote:
There is a OSS driver upcoming, supported by the chip manufacturer
themselves
(AFA Technologies.) I have been a bit involved in that process.
Yep - looks nice - and do you have any idea about the release
David Santinoli wrote:
On Thu, Dec 27, 2007 at 12:46:38AM +0400, Manu Abraham wrote:
David Santinoli wrote:
On Wed, Dec 19, 2007 at 11:49:42PM +0400, Manu Abraham wrote:
en50221_app_ai_parse_app_info: Received short data
This requires quite a bit as to what messages are sent to the
driver
Zdenek Kabelac wrote:
Hi Manu
I'd like to hear it clearly - should I safe my time to play with this device?
Do you mean by this answer that you know someone already writes the
driver for AsusTV Hybrid Volar HX USB device ?
(And driver will be opensource and usable with any kernel I need
Zdenek Kabelac wrote:
2008/1/1, Manu Abraham [EMAIL PROTECTED]:
Zdenek Kabelac wrote:
Hi Manu
There is a OSS driver upcoming, supported by the chip manufacturer themselves
(AFA Technologies.) I have been a bit involved in that process.
Yep - looks nice - and do you have any idea about
Steven Toth wrote:
Manu Abraham wrote:
Michael Krufky wrote:
Manu Abraham wrote:
Zdenek Kabelac wrote:
2007/12/31, Michael Krufky [EMAIL PROTECTED]:
Zdenek Kabelac wrote:
Hello
I should start a new thread about this USB2.0 device.
I'll repeat which chips I could find
Michael Krufky wrote:
Manu Abraham wrote:
Some of the vendors (more than one) wrote to me that the TDA18271 driver
doesn't work. That was the basis of my statement.
Silly vendors. Why write to _you_ about somebody else's work?
One of the vendors cc'd me, since they did ask you and had
Michael Krufky wrote:
Manu Abraham wrote:
Michael Krufky wrote:
Manu Abraham wrote:
Some of the vendors (more than one) wrote to me that the TDA18271 driver
doesn't work. That was the basis of my statement.
Silly vendors. Why write to _you_ about somebody else's work?
One of the vendors
Christoph Pfister wrote:
Am Mittwoch 26 Dezember 2007 schrieb Steven Ellis:
Attached patch is off the dvb-apps mercurial repo for scan.c. This adds
the following additional support to the scan tool -
1. H.264 video stream detection - type 0x1b
2. ADTS Audio streams - usually AAC Audio - type
Zdenek Kabelac wrote:
2007/12/31, Michael Krufky [EMAIL PROTECTED]:
Zdenek Kabelac wrote:
Hello
I should start a new thread about this USB2.0 device.
I'll repeat which chips I could find in the USB device -
SAA7136E,CY7C68013A,TDA18271HDC1
You should base your work off the master branch.
Michael Krufky wrote:
Manu Abraham wrote:
Zdenek Kabelac wrote:
2007/12/31, Michael Krufky [EMAIL PROTECTED]:
Zdenek Kabelac wrote:
Hello
I should start a new thread about this USB2.0 device.
I'll repeat which chips I could find in the USB device -
SAA7136E,CY7C68013A
preeya wrote:
Hi,
I am using the matrix ZCAS module to descramble the dvb scrambled
streams. After the En50221 stack is initialized the module is creating
the sessions with the resource manager resource, application information
resource, conditional access resource and MMI resource but
Steven Toth wrote:
Luc Brosens wrote:
all,
so I got the WinTV-CI from Hauppauge. Nice little thing, powered through
the USB(2)-port.
On the box, is says Common-Interface extension over USB.
Cool.
There's software with it, but of course only XP and Vista... which are out
of the
John Goacher wrote:
Manu Abraham wrote:
John Goacher wrote:
When i looked at the pctv452 driver it was based on a older stb0899
driver
snapshot.
It still is based on the same ? There were many issues fixed in newer
changesets, so
i don't know whether the issue that you see is really
CityK wrote:
Hi folks,
Google summer of code will be rolling around in a couple of months. Now
I know we've talked a little bit about it before, but I don't recall
what the thoughts on it were. In any regard, on the surface of things,
it would seem a perfect opportunity for the LinuxTV
David Santinoli wrote:
On Wed, Dec 19, 2007 at 11:49:42PM +0400, Manu Abraham wrote:
en50221_app_ai_parse_app_info: Received short data
I think, it could be that the stack at some point sends some junk to
the device, thereby causing the device to go crazy. Please do not that
the library
Marco Coli wrote:
Hello and Happy Holydays to everyone.
I think I am missing something. In my system I have a working DVB TT
Card with CI. Now I added a S2-3200.
So i compiled and installed succesfully the new multiproto experimental
drivers.
After this, I modprobed stb0899 module (I
Steven Toth wrote:
Manu Abraham wrote:
Steven Toth wrote:
Luc Brosens wrote:
all,
so I got the WinTV-CI from Hauppauge. Nice little thing, powered
through the USB(2)-port.
On the box, is says Common-Interface extension over USB.
Cool.
There's software with it, but of course only XP
Steven Toth wrote:
Hans Verkuil wrote:
On Wednesday 19 December 2007 17:26:35 CityK wrote:
Hi folks,
Google summer of code will be rolling around in a couple of months.
Now I know we've talked a little bit about it before, but I don't
recall what the thoughts on it were. In any regard, on
John Goacher wrote:
Manu Abraham wrote:
John Goacher wrote:
Tony Grant wrote:
Le vendredi 14 décembre 2007 à 13:49 +, John Goacher a écrit :
Your success with Das Erste prompted me to
temporarily re-align my dish (Sky minidish) to point to 19.2E to see if
I could duplicate your
bbee wrote:
Hi Manu,
Hmm, is there no way to detect at runtime which cards would need the
fix? Something must have changed on the card itself, even if the pci id
hasn't.
Wouldn't like to have to keep making this change in every kernel I
compile..
I will try to make it a parameter or
Martin Drab wrote:
On Wed, 19 Dec 2007, Manu Abraham wrote:
Martin Drab wrote:
Hi,
what is the current state of the Linux driver for SAA7162? Has there been
any progress so far? Is there somewhere at least something to test or
build on?
Nothing to build yet, the current status
with this style, the definitions
inside the switch statement can be easily adapted for any card, thereby
eliminating the need for any additional ioctls.
Manu
Greetings,
Ben
-Original Message-
From: Manu Abraham [mailto:[EMAIL PROTECTED]
Sent: 18 December 2007 23:13
To: Ben Backx
Cc
Ben Backx wrote:
Hello,
I’m currently working on the development of a linux device driver for a
DVB-receiver (for the moment, I’m not going to mention brand or product,
I’m waiting for an official announcement from the company itself, just
to avoid any troubles).
For the moment, FTA
Fredrik Jonson wrote:
Hello!
Any progress on CA support for the Twinhan 1034.
Expected it to happen by this month end, but it still hasn't happened yet.
Nice work so far. Works fine in kernel 2.6.22.12 the only thing missing is
now the CA/CI support.
That's nice to know.
Regards,
David Santinoli wrote:
Any suggestions for a DVB-S card supporting Cryptoworks via CAM?
I've got a VP1032 CI card (PCI id 1822:0001), a Cryptoworks module by
SCM, and a regular JSTV (Japanese satellite TV) subscription, but after
5 minutes or so decryption stops working with a Received short
1 - 100 of 675 matches
Mail list logo