Subject: Re: [linux-dvb] STB0899 users, please verify results was Re: TechniSat
SkyStar HD: Problems scaning and zaping
Simeon Simeonov wrote:
I am using mythtv and here is the sequence of commands:
Without repeat:
DiSEqCDevTree: Changing LNB voltage to 13V
DiSEqCDevTree: Rotor - Goto Stored
: Manu Abraham [EMAIL PROTECTED]
To: Simeon Simeonov [EMAIL PROTECTED]
Cc: linux-dvb@linuxtv.org
Sent: Sunday, March 2, 2008 2:38:51 PM
Subject: Re: [linux-dvb] STB0899 users, please verify results was Re:
TechniSat SkyStar HD: Problems scaning and zaping
Simeon Simeonov wrote:
Hi Manu,
I am
Sent: Sunday, March 2, 2008 2:38:51 PM
Subject: Re: [linux-dvb] STB0899 users, please verify results was Re:
TechniSat SkyStar HD: Problems scaning and zaping
Simeon Simeonov wrote:
Hi Manu,
I am attaching two gzipped logs. They are supposed to tune to the same
frequency using the tip
Seppo Ingalsuo wrote:
Manu Abraham wrote:
Seppo Ingalsuo wrote:
Simeon Simeonov wrote:
Did you try changing line 250 in mantis_dvb.c to:
if (!lnbp21_attach(mantis-fe, mantis-adapter,
LNBP21_PCL, LNBP21_ISEL)) {
I tried mantis-a9ecd19a37c9.
Simeon Simeonov wrote:
Hi Manu,
I am attaching two gzipped logs. They are supposed to tune to the same
frequency using the tip
of Mantis tree. The difference between the two are that in the GOOD log no
repeat command is used
and in the BAD log one repeat for the switch is issued. The
DiSEqC Command: e1 10 38 f0
- Original Message
From: Manu Abraham [EMAIL PROTECTED]
To: Simeon Simeonov [EMAIL PROTECTED]
Cc: linux-dvb@linuxtv.org
Sent: Sunday, March 2, 2008 2:38:51 PM
Subject: Re: [linux-dvb] STB0899 users, please verify results was Re: TechniSat
SkyStar HD: Problems
Manu Abraham wrote:
Seppo Ingalsuo wrote:
Simeon Simeonov wrote:
Did you try changing line 250 in mantis_dvb.c to:
if (!lnbp21_attach(mantis-fe, mantis-adapter,
LNBP21_PCL, LNBP21_ISEL)) {
I tried mantis-a9ecd19a37c9. Without the change success in
positioning was about
Simeon Simeonov wrote:
Did you try changing line 250 in mantis_dvb.c to:
if (!lnbp21_attach(mantis-fe, mantis-adapter, LNBP21_PCL,
LNBP21_ISEL)) {
I tried mantis-a9ecd19a37c9. Without the change success in positioning
was about 0% similarly as with
Seppo Ingalsuo wrote:
Simeon Simeonov wrote:
Did you try changing line 250 in mantis_dvb.c to:
if (!lnbp21_attach(mantis-fe, mantis-adapter, LNBP21_PCL,
LNBP21_ISEL)) {
I tried mantis-a9ecd19a37c9. Without the change success in positioning
was about 0% similarly as with
with the LNBP21 attach change ?
Regards,
Manu
- Original Message
From: Manu Abraham [EMAIL PROTECTED]
To: Simeon Simeonov [EMAIL PROTECTED]
Cc: linux-dvb@linuxtv.org
Sent: Thursday, February 28, 2008 1:29:55 AM
Subject: Re: [linux-dvb] STB0899 users, please verify results was Re
, February 28, 2008 1:29:55 AM
Subject: Re: [linux-dvb] STB0899 users, please verify results was Re:
TechniSat SkyStar HD: Problems scaning and zaping
Simeon Simeonov wrote:
I don't know if is the same but with the latest mantis tree I get 100%
success.
Reverting to changeset mantis
Simeon Simeonov wrote:
I am using VP-1041 with the lnb21_attach changes to the ISEL and PCL bit
settings.
At the moemnt I have no clue why I am having this diseqc issue. I also
checked the
logs and I see from time to time diseqc_fifo_full messages but there is no
correlation
with the
: linux-dvb@linuxtv.org
Sent: Friday, February 29, 2008 3:40:05 PM
Subject: Re: [linux-dvb] STB0899 users, please verify results was Re: TechniSat
SkyStar HD: Problems scaning and zaping
Simeon Simeonov wrote:
I am using VP-1041 with the lnb21_attach changes to the ISEL and PCL bit
settings
Simeon Simeonov wrote:
I don't know if is the same but with the latest mantis tree I get 100%
success.
Reverting to changeset mantis-100d4b009238 (which I think corresponds to
multiproto 7200)
I do NOT any locks on the same transponder.
For the mantis tree, please test this changeset: 7275
Bardenheier (obardenh)
Subject: Re: [linux-dvb] STB0899 users, please verify results was Re:
TechniSat SkyStar HD: Problems scaning and zaping
Oliver Bardenheier (obardenh) wrote:
I can confirm that current hg-tree breaks SkyStarHD. Mostly unusable,
many transponders not working.
I changed back
To: Oliver Bardenheier (obardenh)
Subject: Re: [linux-dvb] STB0899 users, please verify results was Re:
TechniSat SkyStar HD: Problems scaning and zaping
Oliver Bardenheier (obardenh) wrote:
I can confirm that current hg-tree breaks SkyStarHD. Mostly unusable,
many transponders not working
-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Seppo Ingalsuo
Sent: Donnerstag, 28. Februar 2008 16:53
To: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] STB0899 users, please verify results was Re:
TechniSat SkyStar HD: Problems scaning and zaping
Oliver Bardenheier
Oliver Bardenheier (obardenh) wrote:
No problem, :-)
You just check out the tree via the webpage:
http://jusst.de/hg/multiproto
then click on the needed changeset
http://jusst.de/hg/multiproto/rev/0448e5a6d8a6
and download the bzip with the complete changeset
Vangelis Nonas wrote:
I think this page is very useful, because it explains the procedure
quite well (also tells you about modified scan and zap):
http://www.linuxtv.org/wiki/index.php/Multiproto
Thanks for this as well! Modified scan zap would have been next in my
question list :^)
BR,
I have for vp-1041:
72e81184fb9f work with SR=22000, hi SR work with frequency offset ~+6 MHz for
SR 44948
a9ecd19a37c9 work with SR 44948 ok
but both have trouble, from time to time long wait for lock, from time to time
faster lock... I can't find dependence...
I use vdr-1.5.14+h264 patch,
... But diseqc positioner commands (GotoX from vdr rotor plugin) seem to
not get through with 100% reliability. Changing to use diseqc.conf
seemed to help a bit but I haven't been able to convince the motor to
turn to 28.2E at all.
Did you try changing line 250 in mantis_dvb.c to:
.
- Original Message
From: Manu Abraham [EMAIL PROTECTED]
To: Simeon Simeonov [EMAIL PROTECTED]
Cc: linux-dvb@linuxtv.org
Sent: Thursday, February 28, 2008 1:29:55 AM
Subject: Re: [linux-dvb] STB0899 users, please verify results was Re: TechniSat
SkyStar HD: Problems scaning and zaping
Simeon Simeonov
: Dienstag, 26. Februar 2008 22:45
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] STB0899 users, please verify results was Re:
TechniSat SkyStar HD: Problems scaning and zaping
Vangelis Nonas wrote:
Hello,
Here is the output of hg log|head -n 5 for two different directories
(multiproto
-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Manu Abraham
Sent: Dienstag, 26. Februar 2008 22:45
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] STB0899 users, please verify results was Re:
TechniSat SkyStar HD: Problems scaning and zaping
Vangelis Nonas wrote:
Hello
@linuxtv.org
Sent: Tuesday, February 26, 2008 1:44:37 PM
Subject: [linux-dvb] STB0899 users, please verify results was Re: TechniSat
SkyStar HD: Problems scaning and zaping
Vangelis Nonas wrote:
Hello,
Here is the output of hg log|head -n 5 for two different directories
(multiproto
Seppo, You should use the group-mailer linux-dvb@linuxtv.org
regards
Oliver
-Original Message-
From: Seppo Ingalsuo [mailto:[EMAIL PROTECTED]
Sent: Donnerstag, 28. Februar 2008 07:08
To: Oliver Bardenheier (obardenh)
Subject: Re: [linux-dvb] STB0899 users, please verify results was Re
Vangelis Nonas wrote:
Hello,
Here is the output of hg log|head -n 5 for two different directories
(multiproto and multiproto_7200)
for multiproto:
changeset: 7205:9bdb997e38b5
tag: tip
user:Manu Abraham [EMAIL PROTECTED]
date:Sun Feb 24 02:10:56 2008 +0400
27 matches
Mail list logo
