On Sunday 16 February 2003 09:27 am, Eli Segal wrote:
I've ordered ADSL from yes
and I've asked the PCI modem so they wont bring me the usb thing
will it work on my Debian ??
Not that I know of. I would suggest buying Samsung from Bezeq instead. The PCI
card is piece of shit (IMHO)
Thanks,
Tomorrow, Monday (17/2), 18:30, the Haifa Linux Club will gather to hear
Shachar Shemesh talk about Secure programming. The talk will take place in
the Taub (Computer Science Dept.) bldg. room 6.
Shacar is a well-known Linux supporter, one of Ha-makor people, and knows
a lot about secure
Hi,
I'm on my way to install a PPPoE Samsung to a friend on RH 8. I didn't find
the instructions/howto on IGLU's. Could someone give me a URL for
instructions (and, if needed, a driver) please?
Thanks,
Hetz
=
To unsubscribe, send
Hi,
I have a problem when printing from either KWord of Mozilla, that the
Hebrew text does not print at all. I think that telling them to embed
the fonts in the PS would solve this problem, but I don't know how to do
that (yes, I have searched the archives, all I found were people saying
you
ok...
I will buy the modem from bezeq (samsung)
and I need to buy a network card .. what dead chip card will fit ???
thanx
- Original Message -
From: Hetz Ben Hamo [EMAIL PROTECTED]
To: Eli Segal [EMAIL PROTECTED]; Linux-IL [EMAIL PROTECTED]
Sent: Sunday, February 16, 2003 10:51 AM
On Sun, Feb 16, 2003, Eli Segal wrote about Hebrew with mutt:
What Are my option to be able to read and write with mutt client ??
Here is what I use in my ~/.muttrc. Yes, I know some of these options (in
particular 'charset') may be the wrong options to use, but it works...
# This character set
wow .. thanx
I was using vim to write and display mail also but i didn't know how to make
it
to exec in hebrew mode
so this helps a lot
- Original Message -
From: Nadav Har'El [EMAIL PROTECTED]
To: Eli Segal [EMAIL PROTECTED]
Cc: Linux-IL [EMAIL PROTECTED]
Sent: Sunday, February 16,
On Sun, Feb 16, 2003 at 10:51:22AM +0200, Hetz Ben Hamo wrote:
On Sunday 16 February 2003 09:27 am, Eli Segal wrote:
I've ordered ADSL from yes
and I've asked the PCI modem so they wont bring me the usb thing
will it work on my Debian ??
Not that I know of. I would suggest buying
On Sun, Feb 16, 2003 at 11:19:35AM +0200, Shachar Shemesh wrote:
I have a problem when printing from either KWord of Mozilla, that the
Hebrew text does not print at all. I think that telling them to embed
the fonts in the PS would solve this problem, but I don't know how to do
that (yes, I
no ... just one computer
- Original Message -
From: Dekel Tsur [EMAIL PROTECTED]
To: Eli Segal [EMAIL PROTECTED]; Linux-IL [EMAIL PROTECTED]
Sent: Sunday, February 16, 2003 11:47 AM
Subject: Re: ADSL modem
On Sun, Feb 16, 2003 at 10:51:22AM +0200, Hetz Ben Hamo wrote:
On Sunday 16
Would that router provide firewall capabilities?
I love the flexibility of having my Linux box as a firewall
(and it costs less than your quoted price (ADSL ethernet modem cost
me 240NIS, ethernet cards borrowed but would cost another 140 NIS
for two cards)).
--Amos
-Original Message-
Shachar Shemesh wrote:
Hi,
I have a problem when printing from either KWord of Mozilla, that the
Hebrew text does not print at all. I think that telling them to embed
the fonts in the PS would solve this problem, but I don't know how to
do that (yes, I have searched the archives, all I found
do I need a specific firm for ethernet card ??
or shoud what they sell on most stores will do ??
for now I just want to connect to ADSL
thanx
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, February 16, 2003 12:02 PM
Subject: RE: ADSL modem
Would
As far as I can tell Linux supports practically any card
you'll find in the market.
What I would do if I were you is:
1. see what your favourite store offers, make double-sure
they give you the right model number (make it clear to them that
if it doesn't work with your PC then you'll give it
Dekel Tsur wrote:
The QT library contains a code that converts the TTF fonts to Postscript
fonts, and embed them in the Postscript file.
Can you tell me what library this code resides in? I may simply not have
have it installed.
--
Shachar Shemesh
Open Source integration consultant
On Sunday 16 February 2003 11:13 am, Eli Segal wrote:
ok...
I will buy the modem from bezeq (samsung)
and I need to buy a network card .. what dead chip card will fit ???
Any card. Fact is, I'll be suprised to find a low end card which doesn't work
with Linux...
Thanks,
Hetz
On Sun, 16 Feb 2003 [EMAIL PROTECTED] wrote:
As far as I can tell Linux supports practically any card
you'll find in the market.
What I would do if I were you is:
1. see what your favourite store offers, make double-sure
they give you the right model number (make it clear to them that
if
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
This probably isn't your problem, but just in case - there was a famous bug in
the qt 3.0.x series that prevented you from printing Hebrew text, you just
got empty spaces or squares instead. This was fixed in qt 3.1.x (and possibly
in the
According to
http://www.ynet.co.il/articles/0,7340,L-2439013,00.html
Opera has a new special version which messes with MSN.com, translating its
text into swedish chef language [1].
See also http://www.opera.com/pressreleases/en/2003/02/14/index.dml
Apparently, this is a protest against
On Sun, 16 Feb 2003, Nadav Har'El wrote:
So maybe in order to stop their browser monopoly our (free software people)
goal should be to push a free server (including all the ASP,VB, and other
crap that MS developers love to use) to replace Microsoft's?
In this case teach them Perl and look
the real isssue here is how Opera are offending the sweeden people
btw: MS were trting to push somehing similar in IE6, anyone remember...?
ביום ראשון, 16 בפברואר 2003, 17:29, Nadav Har'El כתב:
According to
http://www.ynet.co.il/articles/0,7340,L-2439013,00.html
Opera has a new special
Orr Dunkelman wrote:
Tomorrow, Monday (17/2), 18:30, the Haifa Linux Club will gather to hear
Shachar Shemesh talk about Secure programming. The talk will take place in
the Taub (Computer Science Dept.) bldg. room 6.
Shacar is a well-known Linux supporter, one of Ha-makor people, and knows
a
On Sun, Feb 16, 2003, Diego Iastrubni wrote about Re: Bork, Bork, Bork!:
the real isssue here is how Opera are offending the sweeden people
Opera are from Norway - I guess they love to make fun of their neighbors
the Swedes :)
Anyway, the Swedish Chef thing isn't their own invention - it's
Not much is needed. You need the roaring penguin's rp-pppoe. I guess you
should have a package of RH already installed, if not get it from the site:
http://www.roaringpenguin.com/pppoe/
Installed that.
You can also find instructions there. After the package is installed (along
with pppd of
On Sunday 16 February 2003 17:16, Hetz Ben Hamo wrote:
And the NIC IP is?
I didn't manage to get it connected. I tried with @OBezeq, with a real
user/pass - but the authentication always failed. I tried with different
NIC (should the NIC have any IP or just configure it to connect to a some
My suggestions,
You might want to call you ISP and let them know to forget about
the PCI modem. I'm not sure on the status of drivers for PCI
ADSL modems but I'm sure it's far from perfect.
The best way is to get an Ethernet modem. The Alcatel would obviously
be the 1st choice but the old
--- Forwarded message ---
From: Voguemaster [EMAIL PROTECTED]
To: Eli Segal [EMAIL PROTECTED], Linux-IL [EMAIL PROTECTED]
Subject: Re: ADSL modem
Date: Sun, 16 Feb 2003 19:39:09 +0200
My suggestions,
You might want to call you ISP and let them know to forget about
the PCI modem. I'm
Hmmm,
I don't have a URL but I know the Broadband forum in Tapuz
have a site with instructions for using PPPoE, for both
Linux AND Winblows.
In any case, a driver is only needed for the Ethernet card,
just reminding you :)
Eli
On Sun, 16 Feb 2003 10:54:43 +0200, Hetz Ben Hamo [EMAIL PROTECTED]
if you set dhcp, you wil get an address from 10.0.0.4 to 10.0.0.7, you can
also staticly set it to 10.0.0.1 (which I dont think it is recommended)
áéåí øàùåï, 16 áôáøåàø 2003, 19:16, Hetz Ben Hamo ëúá:
Not much is needed. You need the roaring penguin's rp-pppoe. I guess you
should have a
Well,
I'm not sure about newer kernels but from my experience,
the linux kernel doesn't have built-in support for
some Intel chipsets. It actually surprises me.
I had to compile a kernel module for an onboard chip
(forgot which) on my RH 6.2 (yes, it still works :) ).
Eli
On Sun, 16 Feb 2003
I'd like a CGI script that will mirror another site. I.e: by entering:
http://www.myhost.com/google/
I will see the contents of
http://www.google.com/
And http://www.myhost.com/google/search?q=hello will display:
http://www.google.com/search?q=hello
The best I could find was:
On Sunday, Feb 16, 2003, at 19:41 Asia/Jerusalem, Voguemaster wrote:
Hmmm,
I don't have a URL but I know the Broadband forum in Tapuz
have a site with instructions for using PPPoE, for both
Linux AND Winblows.
the forum:
http://www.tapuz.co.il/tapuzforum/main/forumpage.asp?id=20
the site:
Ira Abramov wrote:
risky busines, they could get suid, you know? :)
And we all know that any SUID program is an opening for an exploite. I
guess now I'm confusing this email with the previous one I sent, though.
I hope Hamakor's resources can help change that.
Speaking of which.
We
Hello group !
After upgrading Debian's 2.2 kernel to 2.4 (with too much headaches,)
I found out that I can not configure my sound card correctly.
I run 'sndconfig' and it identifies my sound card correctly !
(I know it is correct because both RH and MDK found it to be the same)
but... When it is
Feb 16 22:16:46 rulix kernel: es1371: version v0.30 time 11:54:22 Apr 14
2002 Feb 16 22:16:46 rulix kernel: PCI: Found IRQ 11 for device 00:0d.0 Feb
16 22:16:46 rulix kernel: PCI: Sharing IRQ 11 with 01:00.0
Feb 16 22:16:46 rulix kernel: es1371: found chip, vendor id 0x1274 device
id 0x5880
Hetz Ben Hamo [EMAIL PROTECTED]:
My guess is that you have the cheap Creative sound card: Ensonique 1371.
Doing: /sbin/modprobe es1371 should load the sound driver.
It is actually: Ensoniq|5580 AudioPCI
Look at the output of your: /sbin/lspci - first device on the list is 01:00.0
- thats
On Sun, 16 Feb 2003 19:44:41 +0200
Voguemaster [EMAIL PROTECTED] wrote:
I had to compile a kernel module for an onboard chip
(forgot which) on my RH 6.2 (yes, it still works :) ).
I'll bet the onboard chipset was develped two years *after*
RedHat-6.2 so it is clear you had to compile a module
Quoting Shlomi Fish, from the post of Sun, 16 Feb:
I'd like a CGI script that will mirror another site. I.e: by entering:
http://www.myhost.com/google/
I will see the contents of
http://www.google.com/
You don't have to look any further than Apache's own mod_rewrite and
reverse proxy.
Quoting Eliran Gonen, from the post of Sun, 16 Feb:
My guess is that you have the cheap Creative sound card: Ensonique 1371.
Doing: /sbin/modprobe es1371 should load the sound driver.
It is actually: Ensoniq|5580 AudioPCI
doesn't matter. try the modprobe, it should work. sndconfig has
Hello,
I have a computer I want to connect to my home network, but it only has
usb port (no ethernet, PCI or ISA).
Linux has two drivers for those (usbnet for usb-usb cables, and CDCEther
for usb-ethernet adaptors), but the I don't know which devices are
supported by those.
If anyone knows of
On Sun, Feb 16, 2003 at 11:04:49PM +0200, Ira Abramov wrote:
Quoting Eliran Gonen, from the post of Sun, 16 Feb:
[snip]
is there still a problem? if the manual modprobe helped, just do
echo es1371 /etc/modules
Make that or you run over your other modules :-(
Didi
(or
On Sun, 16 Feb 2003, Ira Abramov wrote:
Quoting Shlomi Fish, from the post of Sun, 16 Feb:
I'd like a CGI script that will mirror another site. I.e: by entering:
http://www.myhost.com/google/
I will see the contents of
http://www.google.com/
You don't have to look any further
On Sun, Feb 16, 2003, Tzafrir Cohen wrote about Re: RFI: An HTTP Mirroring CGI
Script:
You don't have to look any further than Apache's own mod_rewrite and
reverse proxy. this is how you get to see
http://www.iglu.org.il:8080/Control_Panel/Products/Squishdot/IGLU/
at
Quoting Yedidyah Bar-David, from the post of Sun, 16 Feb:
On Sun, Feb 16, 2003 at 11:04:49PM +0200, Ira Abramov wrote:
Quoting Eliran Gonen, from the post of Sun, 16 Feb:
[snip]
is there still a problem? if the manual modprobe helped, just do
echo es1371 /etc/modules
Make that
echo es1371 /etc/modules
Make that or you run over your other modules :-(
umm, shouldn't it be:
echo alias sound es1371 /etc/modules ?
At least thats what I see here on Mandrake, SuSE and Redhat 7.3, 8.1..
Thanks,
Hetz
On Sun, 16 Feb 2003, Hetz Ben Hamo wrote:
You can also find instructions there. After the package is installed (along
with pppd of course), run:
adsl-setup
And answer the questions. To connect do:
adsl-start
OK.
The modem's IP address is 10.0.0.2.
And the NIC IP is?
I
On Fri, 14 Feb 2003, Stanislav Malyshev wrote:
I have rather strange problem with routing on Linux. The host in question
is 2.2.19. It is connected to Frame Relay and ADSL (eth0 and ppp0
interfaces, accordingly). The intranet is on eth1, all connections outside
are masqueraded.
What I
On Mon, Feb 17, 2003 at 12:18:43AM +0200, Hetz Ben-Hamo wrote:
echo es1371 /etc/modules
Make that or you run over your other modules :-(
umm, shouldn't it be:
echo alias sound es1371 /etc/modules ?
At least thats what I see here on Mandrake, SuSE and Redhat 7.3, 8.1..
Don't
Hi!
I live in Tel Aviv (Gimel to be exact) and am looking for a ride to the
lecture and back. Arriving by public transportation is simply too
inconvenient.
If anybody is planning on driving there from Tel-Aviv (I can meet you
on Haifa Road or the Ayalon) and has a spare seat, please E-mail me.
49 matches
Mail list logo
