f5c7e15b61f2ce4fe3105ff914f6bfaf5d74af0d Mon Sep 17 00:00:00 2001
From: H. Nikolaus Schaller h...@goldelico.com
Date: Thu, 15 Nov 2012 14:40:57 +0100
Subject: [PATCH 1/1] hso: fix problem with wrong status code sent by OPTION
GTM601 during RING indication
It has been observed that the GTM601 with 1.7
Hi,
Am 03.10.2013 um 21:29 schrieb David Miller:
From: Dr. H. Nikolaus Schaller h...@goldelico.com
Date: Wed, 2 Oct 2013 09:00:18 +0200
From f5c7e15b61f2ce4fe3105ff914f6bfaf5d74af0d Mon Sep 17 00:00:00 2001
From: H. Nikolaus Schaller h...@goldelico.com
Date: Thu, 15 Nov 2012 14:40:57
Am 03.10.2013 um 22:00 schrieb David Miller:
From: Dr. H. Nikolaus Schaller h...@goldelico.com
Date: Thu, 3 Oct 2013 21:40:34 +0200
I have made the bug observation from debug log that this bit is set in a
response
each time the modem has a RING message. It might be specific to this modem
Hi Tomi,
Am 11.10.2013 um 12:09 schrieb Tomi Valkeinen:
On 11/10/13 12:50, Dr. H. Nikolaus Schaller wrote:
Hm. Is this a SPI or does it just look like one? Or is it some - otherwise
unknown - 3 wire serial interface. Or is it a 3(+1) GPIO slave device?
I am still not sure about
While upgrading the GTA04 kernel to 3.12-rc4 we came across
an issue with libertas/sdio referencing stale memory on ifconfig up
when trying to load the firmware (for a second time).
I am not at all sure if the patch is how it should be done and the right
location, but it appears to work for us
Hi Dan,
Am 12.10.2013 um 21:58 schrieb Dan Williams:
On Sat, 2013-10-12 at 18:02 +0200, Dr. H. Nikolaus Schaller wrote:
While upgrading the GTA04 kernel to 3.12-rc4 we came across
an issue with libertas/sdio referencing stale memory on ifconfig up
when trying to load the firmware
Hi Tomi,
Am 11.11.2013 um 14:29 schrieb Tomi Valkeinen:
Hi,
On 2013-11-05 09:24, Belisko Marek wrote:
Hi,
ping.
On Mon, Oct 14, 2013 at 11:02 PM, Marek Belisko ma...@goldelico.com wrote:
This patches is adding bypass and acbias functionality to omapdss venc
driver.
In first patch
Am 11.11.2013 um 15:13 schrieb Tomi Valkeinen:
On 2013-11-11 15:57, Dr. H. Nikolaus Schaller wrote:
Hi Tomi,
Am 11.11.2013 um 14:29 schrieb Tomi Valkeinen:
Hi,
On 2013-11-05 09:24, Belisko Marek wrote:
Hi,
ping.
On Mon, Oct 14, 2013 at 11:02 PM, Marek Belisko ma
Am 11.11.2013 um 15:13 schrieb Tomi Valkeinen:
On 2013-11-11 15:57, Dr. H. Nikolaus Schaller wrote:
Hi Tomi,
Am 11.11.2013 um 14:29 schrieb Tomi Valkeinen:
Hi,
On 2013-11-05 09:24, Belisko Marek wrote:
Hi,
ping.
On Mon, Oct 14, 2013 at 11:02 PM, Marek Belisko ma
Am 15.11.2013 um 14:58 schrieb Arnd Bergmann:
On Thursday 14 November 2013, Marek Belisko wrote:
DT bindings contains more parameters to set so add them to platform data also
to have possibility to use on arch where DT isn't available yet.
Signed-off-by: Marek Belisko ma...@goldelico.com
Hi Tomi,
Am 18.11.2013 um 14:29 schrieb Tomi Valkeinen:
On 2013-11-11 16:30, Dr. H. Nikolaus Schaller wrote:
Maybe it looks as if it is an unsolvable problem. The OPA works only if
acbias
and bypass are enabled, but is not allowed to tell that it is there.
That's why the board file
Am 12.02.2014 um 17:20 schrieb Greg Kroah-Hartman:
On Wed, Feb 12, 2014 at 04:35:12PM +0100, Dr. H. Nikolaus Schaller wrote:
Am 12.02.2014 um 15:29 schrieb Greg Kroah-Hartman:
On Wed, Feb 12, 2014 at 11:08:22AM +0100, Dr. H. Nikolaus Schaller wrote:
fixed a potential NULL pointer
Am 10.02.2014 um 09:27 schrieb Johannes Berg:
On Fri, 2014-02-07 at 20:48 +0100, Marek Belisko wrote:
+#define RFKILL_TYPE_ALL (0)
+#define RFKILL_TYPE_WLAN(1)
+#define RFKILL_TYPE_BLUETOOTH (2)
+#define RFKILL_TYPE_UWB (3)
+#define RFKILL_TYPE_WIMAX
in a kernel panic.
Since a non-existing gadget can never be active we
simply use a 0 value for musb-is_active.
Signed-off-by: H. Nikolaus Schaller h...@goldelico.com
0001-fixed-a-potential-NULL-pointer-dereference.patch
Description: Binary data
Am 12.02.2014 um 15:29 schrieb Greg Kroah-Hartman:
On Wed, Feb 12, 2014 at 11:08:22AM +0100, Dr. H. Nikolaus Schaller wrote:
fixed a potential NULL pointer dereference.
Rationale:
this is the only location in the musb driver where the
otg-gadget pointer is dereferenced. Assuming
it's
not performance issue.
Signed-off-by: Marek Belisko ma...@goldelico.com
Signed-off-by: H. Nikolaus Schaller h...@goldelico.com
---
drivers/video/omap2/displays-new/Kconfig | 6 +
drivers/video/omap2/displays-new/Makefile | 1 +
.../omap2/displays-new/panel-tpo
Hi Tomi,
Am 10.10.2013 um 13:10 schrieb Tomi Valkeinen:
On 10/10/13 12:34, Dr. H. Nikolaus Schaller wrote:
Hi Tomi,
Am 10.10.2013 um 10:19 schrieb Tomi Valkeinen:
Hi,
On 10/10/13 00:08, Marek Belisko wrote:
For communicating with driver is used gpio bitbanging because TD028 does
Am 10.10.2013 um 14:26 schrieb Lars-Peter Clausen:
On 10/10/2013 02:13 PM, Tomi Valkeinen wrote:
On 10/10/13 14:52, Dr. H. Nikolaus Schaller wrote:
Yes, I agree and I am willing to help if someone comes up with such a SoC.
At the moment we have connected it to the OMAP3 only.
True
Hi all,
Am 11.10.2013 um 06:41 schrieb Tomi Valkeinen:
On 10/10/13 21:58, Lars-Peter Clausen wrote:
According to the datasheet the the panel as a dedicated dout pin. Maybe
you did not connect it in your design, which means you won't be able to
read any data from the panel at all.
I
Hi Lars-Peter,
ah, I didn't see your mail while writing mine - so some overlap.
Am 11.10.2013 um 09:08 schrieb Lars-Peter Clausen:
On 10/11/2013 06:41 AM, Tomi Valkeinen wrote:
On 10/10/13 21:58, Lars-Peter Clausen wrote:
According to the datasheet the the panel as a dedicated dout pin.
Hi all,
Am 11.10.2013 um 11:06 schrieb Lars-Peter Clausen:
On 10/11/2013 10:59 AM, Belisko Marek wrote:
Hi Tomi,
On Fri, Oct 11, 2013 at 10:17 AM, Tomi Valkeinen tomi.valkei...@ti.com
wrote:
On 11/10/13 10:42, Dr. H. Nikolaus Schaller wrote:
I am not sure if there is a SPI driver
Hi Dan,
Am 16.12.2013 um 20:40 schrieb Dan Williams:
On Fri, 2013-12-13 at 15:43 +0100, Dr. H. Nikolaus Schaller wrote:
Hi,
Am 02.10.2013 um 09:00 schrieb Dr. H. Nikolaus Schaller:
Hi Jan,
we are using a GTM601 modem (Firmware 1.7) for a while and have spotted an
issue that under
Hi Dan,
Am 17.12.2013 um 23:27 schrieb Dan Williams:
On Tue, 2013-12-17 at 20:56 +0100, Dr. H. Nikolaus Schaller wrote:
Hi Dan,
Am 16.12.2013 um 20:40 schrieb Dan Williams:
On Fri, 2013-12-13 at 15:43 +0100, Dr. H. Nikolaus Schaller wrote:
Hi,
Am 02.10.2013 um 09:00 schrieb Dr. H
Hi Dan,
Am 18.12.2013 um 18:49 schrieb Dan Williams:
On Wed, 2013-12-18 at 14:16 +0100, Dr. H. Nikolaus Schaller wrote:
Hi Dan,
Am 17.12.2013 um 23:27 schrieb Dan Williams:
On Tue, 2013-12-17 at 20:56 +0100, Dr. H. Nikolaus Schaller wrote:
Hi Dan,
Am 16.12.2013 um 20:40 schrieb Dan
Hi,
Am 02.10.2013 um 09:00 schrieb Dr. H. Nikolaus Schaller:
Hi Jan,
we are using a GTM601 modem (Firmware 1.7) for a while and have spotted an
issue that under some conditions the modem sends a packed wIndex over USB
that is rejected by the hso driver making troubles afterwards
Hi,
Am 23.03.2014 um 22:50 schrieb David Fries:
On Mon, Mar 17, 2014 at 10:38:13PM +0100, Belisko Marek wrote:
Hi,
booting latest 3.14-rc7 on gta04 board gives following warning:
[3.101409] Driver for 1-wire Dallas network protocol.
[3.109649] omap_hdq omap_hdq: OMAP HDQ
...@gmail.com
Signed-off-by: David Fries da...@fries.net
---
Evgeniy any comments? The patch looks good to me.
Dr. H. Nikolaus Schaller, Can you give this patch another test? I
don't expect any problems, but it is now only sending one add instead
of two which is a change.
It merges fine and we
Improve operation on OpenPhoenux GTA04 board:
* treat receiving 0xff from the 1-wire layer as a missing battery
* print calibration warning only in debug mode to keep dmesg clean
Signed-off-by: NeilBrown ne...@suse.de
Signed-off-by: H. Nikolaus Schaller h...@goldelico.com
---
drivers/power
on /sys/power/state'
Signed-off-by: Lukas Märdian lu...@goldelico.com
Signed-off-by: H. Nikolaus Schaller h...@goldelico.com
---
drivers/input/keyboard/gpio_keys.c | 7 ++-
drivers/input/misc/twl4030-pwrbutton.c | 2 +-
2 files changed, 3 insertions(+), 6 deletions(-)
diff --git
Loading the tca8418 driver as a module on a device tree based system needs
a MODULE_ALIAS because the driver name does not match the automatic
name generation rules of a 'compatible' entry on i2c bus.
Signed-off-by: H. Nikolaus Schaller h...@goldelico.com
---
drivers/input/keyboard
This driver has been used while on the OpenPhoenux GTA04 with
a BMA180.
Signed-off-by: H. Nikolaus Schaller h...@goldelico.com
---
drivers/input/misc/bma150.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/input/misc/bma150.c b/drivers/input/misc/bma150.c
index
Hi David,
I have tested and it appears to suppress the locking issue on our
GTA04 board.
BR,
Nikolaus
Am 14.04.2014 um 00:24 schrieb David Fries:
Belisko Marek,
Here is a possible solution, could you give it a try and report back?
Greg Kroah-Hartman,
Evgeniy asked me to look into this
Hi all,
Am 18.07.2014 um 11:21 schrieb Javier Martinez Canillas:
Hello Marek and Dr. H. Nikolaus,
On Fri, Jul 18, 2014 at 8:55 AM, Joachim Eastwood manab...@gmail.com wrote:
On 16 July 2014 09:17, Dr. H. Nikolaus Schaller h...@goldelico.com wrote:
Am 15.07.2014 um 14:45 schrieb Joachim
userspace, which needs to execute this to stay
awake: 'echo on /sys/power/state'
Signed-off-by: Lukas Märdian lu...@goldelico.com
Signed-off-by: H. Nikolaus Schaller h...@goldelico.com
I'm sorry, but we should not be doing this.
You basically put a delay in driver to work around userspace
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-gta04a5.dts
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2014 H. Nikolaus Schaller h...@goldelico.com
+ *
+ * This program is free software; you can redistribute it and/or
modify
+ * it under the terms of the GNU General
Hi,
Am 29.07.2014 um 14:41 schrieb Tony Lindgren:
* Dr. H. Nikolaus Schaller h...@goldelico.com [140728 13:45]:
Yes,
the boot loader either loads gta04a3.dtb gta04.dtb or gta05.dtb
depending on board revision.
Therefore we have multiple device tree files to represent such hardware
wrote:
Signed-off-by: Marek Belisko ma...@goldelico.com
Signed-off-by: H. Nikolaus Schaller h...@goldelico.com
---
arch/arm/boot/dts/omap3-gta04.dts | 443
+++---
1 file changed, 412 insertions(+), 31 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-gta04.dts
I am trying to make ti,use_poweroff work on 3.17-rc1 for the GTA04 board.
Poweroff was broken for a while and I found that the driver isn't loaded at all.
It appears to me that commit e7cd1d1eb16fcdf53001b926187a82f1f3e1a7e6
did rename the compatible entry from ti,twl4030-power to
Am 20.10.2014 um 19:26 schrieb Dr. H. Nikolaus Schaller h...@goldelico.com:
Hi,
Am 20.10.2014 um 11:35 schrieb Mark Rutland mark.rutl...@arm.com:
Hi,
On Fri, Oct 17, 2014 at 08:55:50PM +0100, Dr. H. Nikolaus Schaller wrote:
Am 17.10.2014 um 13:00 schrieb Mark Rutland mark.rutl
Am 17.10.2014 um 11:37 schrieb Mark Rutland mark.rutl...@arm.com:
On Thu, Oct 16, 2014 at 09:26:23PM +0100, Marek Belisko wrote:
Signed-off-by: H. Nikolaus Schaller h...@goldelico.com
Signed-off-by: Marek Belisko ma...@goldelico.com
---
.../devicetree/bindings/misc/wi2wi,w2sg0004.txt
Am 17.10.2014 um 13:00 schrieb Mark Rutland mark.rutl...@arm.com:
On Fri, Oct 17, 2014 at 11:16:42AM +0100, Dr. H. Nikolaus Schaller wrote:
Am 17.10.2014 um 11:37 schrieb Mark Rutland mark.rutl...@arm.com:
On Thu, Oct 16, 2014 at 09:26:23PM +0100, Marek Belisko wrote:
Signed-off-by: H
implementation by Neil Brown, fixes + DT bindings by H. Nikolaus
Schaller
I’m not sure if this is a good way to model the device.
It is the easiest way we have found after ca. 2 years of working on it :)
You say that it's
connected to a UART, but the code itself has no reference to the tty layer
Hi,
Am 20.10.2014 um 11:35 schrieb Mark Rutland mark.rutl...@arm.com:
Hi,
On Fri, Oct 17, 2014 at 08:55:50PM +0100, Dr. H. Nikolaus Schaller wrote:
Am 17.10.2014 um 13:00 schrieb Mark Rutland mark.rutl...@arm.com:
On Fri, Oct 17, 2014 at 11:16:42AM +0100, Dr. H. Nikolaus Schaller wrote
Hi,
Am 21.10.2014 um 12:49 schrieb Pavel Machek pa...@ucw.cz:
Hi!
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -515,6 +515,16 @@ config VEXPRESS_SYSCFG
bus. System Configuration interface is one of the possible means
of generating transactions on this bus.
Am 13.11.2014 um 17:41 schrieb Tomi Valkeinen tomi.valkei...@ti.com:
On 13/11/14 18:25, Dr. H. Nikolaus Schaller wrote:
Hi,
Am 13.11.2014 um 12:51 schrieb Tomi Valkeinen tomi.valkei...@ti.com:
On 13/11/14 00:10, Marek Belisko wrote:
opa362 is amplifier for video and can be connected
Hi,
Am 25.08.2014 um 23:26 schrieb Tony Lindgren:
* Dr. H. Nikolaus Schaller h...@goldelico.com [140817 08:46]:
I am trying to make ti,use_poweroff work on 3.17-rc1 for the GTA04 board.
Poweroff was broken for a while and I found that the driver isn't loaded at
all.
It appears to me
Am 12.11.2014 um 16:45 schrieb Grazvydas Ignotas nota...@gmail.com:
On Tue, Nov 4, 2014 at 5:42 PM, Tony Lindgren t...@atomide.com wrote:
* Igor Grinberg grinb...@compulab.co.il [141104 05:22]:
Hi Tony,
On 11/02/14 20:07, Tony Lindgren wrote:
Commit e7cd1d1eb16f (mfd: twl4030-power: Add
new file mode 100644
index 000..8065a28
--- /dev/null
+++ b/drivers/video/fbdev/omap2/displays-new/amplifier-opa362.c
@@ -0,0 +1,343 @@
+/*
+ * OPA362 analog video amplifier with output/power control
+ *
+ * Copyright (C) 2014 Golden Delicious Computers
+ * Author: H. Nikolaus Schaller
ping (questions for directions at the end of the mail).
Am 24.10.2014 um 11:32 schrieb Dr. H. Nikolaus Schaller h...@goldelico.com:
Am 20.10.2014 um 19:26 schrieb Dr. H. Nikolaus Schaller h...@goldelico.com:
Hi,
Am 20.10.2014 um 11:35 schrieb Mark Rutland mark.rutl...@arm.com:
Hi
Am 08.11.2014 um 01:22 schrieb NeilBrown ne...@suse.de:
commit e7cd1d1eb16fcdf53001b926187a82f1f3e1a7e6
mfd: twl4030-power: Add generic reset configuration
claims:
Let's add device tree support and configure things for warm reset
as the default when compatible =
Am 10.11.2014 um 00:25 schrieb NeilBrown ne...@suse.de:
On Sat, 8 Nov 2014 09:26:22 + Mark Brown broo...@kernel.org wrote:
On Sat, Nov 08, 2014 at 11:38:03AM +1100, NeilBrown wrote:
If voice port on twl4030 is not connected to a McBSP (or similar)
then we cannot configure the format
Hi Neil,
Am 02.12.2014 um 02:55 schrieb NeilBrown ne...@suse.de:
On Fri, 28 Nov 2014 12:56:33 +0100 Ulf Hansson ulf.hans...@linaro.org wrote:
On 8 November 2014 at 01:14, NeilBrown ne...@suse.de wrote:
If the regulator supplying an SDIO device is shared
with another device, the turning the
Am 15.01.2015 um 19:16 schrieb Dmitry Torokhov dmitry.torok...@gmail.com:
On Thu, Jan 15, 2015 at 05:14:38PM +0100, Dr. H. Nikolaus Schaller wrote:
Am 15.01.2015 um 15:38 schrieb Sebastian Reichel s...@kernel.org:
Hi,
On Thu, Jan 15, 2015 at 08:36:44AM +0100, Dr. H. Nikolaus Schaller
Hi,
Am 15.01.2015 um 15:38 schrieb Sebastian Reichel s...@kernel.org:
Hi,
On Thu, Jan 15, 2015 at 08:36:44AM +0100, Dr. H. Nikolaus Schaller wrote:
1. Perform conversion in input core rather than individual drivers. I
think we should allocate a new bitmaps for some transformations and have
Am 15.01.2015 um 15:38 schrieb Sebastian Reichel s...@kernel.org:
Hi,
On Thu, Jan 15, 2015 at 08:36:44AM +0100, Dr. H. Nikolaus Schaller wrote:
1. Perform conversion in input core rather than individual drivers. I
think we should allocate a new bitmaps for some transformations and have
. Nikolaus Schaller h...@goldelico.com
Author (34): Paul Kocialkowski cont...@paulk.fr
Signed-off-by: H. Nikolaus Schaller h...@goldelico.com
OK, I was hesitant of adding these as normally we have tslib to perform
the conversion, but maybe it is time to allow it in the kernel and
standardize
Am 12.02.2015 um 18:47 schrieb Grazvydas Ignotas nota...@gmail.com:
On Thu, Feb 12, 2015 at 3:03 PM, Marek Belisko ma...@goldelico.com wrote:
From: H. Nikolaus Schaller h...@goldelico.com
This device tree allows to boot, supports the panel,
framebuffer, touch screen, as well as some more
Am 12.02.2015 um 17:03 schrieb Tony Lindgren t...@atomide.com:
Hi,
Few comments below.
* Marek Belisko ma...@goldelico.com [150212 05:07]:
+
+omap3_pmx_core {
+
+mmc1_pins: pinmux_mmc1_pins {
+pinctrl-single,pins =
+OMAP3_CORE1_IOPAD(0x2144,
Am 16.03.2015 um 22:20 schrieb Belisko Marek marek.beli...@gmail.com:
On Mon, Mar 16, 2015 at 10:05 PM, Pavel Machek pa...@ucw.cz wrote:
On Wed 2015-02-04 23:14:32, Marek Belisko wrote:
Signed-off-by: Marek Belisko ma...@goldelico.com
---
.../bindings/power_supply/twl4030_madc_battery.txt |
Hi,
Am 17.03.2015 um 09:47 schrieb Pavel Machek pa...@ucw.cz:
Hi!
diff --git
a/Documentation/devicetree/bindings/power_supply/twl4030_madc_battery.txt
b/Documentation/devicetree/bindings/power_supply/twl4030_madc_battery.txt
new file mode 100644
index 000..bb3580c
--- /dev/null
Am 17.03.2015 um 09:48 schrieb Pavel Machek pa...@ucw.cz:
Temperature calibration should have already been done in the underlaying
twl4030 iio driver.
Discharge rate is the real current flow reported in uA. Also
reported by iio.
Ack, but there's rather severe temperature dependency
Am 17.03.2015 um 09:47 schrieb Pavel Machek pa...@ucw.cz:
Hi!
diff --git
a/Documentation/devicetree/bindings/power_supply/twl4030_madc_battery.txt
b/Documentation/devicetree/bindings/power_supply/twl4030_madc_battery.txt
new file mode 100644
index 000..bb3580c
--- /dev/null
+++
Hi Pavel,
Am 17.03.2015 um 11:37 schrieb Pavel Machek pa...@ucw.cz:
Hi!
to introduce coefficients for temperature and discharge rate?
What do you mean? Nothing like that is used in current driver why do
we need to add it?
Well, conversion between Li-ion's voltage and state of charge at
Hi Pavel,
Am 17.03.2015 um 14:59 schrieb Pavel Machek pa...@ucw.cz:
Hi!
to introduce coefficients for temperature and discharge rate?
What do you mean? Nothing like that is used in current driver why do
we need to add it?
Well, conversion between Li-ion's voltage and state of charge at
Hi Neil,
Am 18.03.2015 um 06:58 schrieb NeilBrown n...@brown.name:
Hi again,
here is version 3 of support for tty-slaves.
This version introduces a new bus-type for tty-slaves,
Hm. I am still not convinced that a tty is a „bus“ and
that this is a solution for a wide-spread problem.
and
Am 18.03.2015 um 06:58 schrieb NeilBrown n...@brown.name:
If a platform has a particular device permanently attached to a UART,
there may be out-of-band signaling necessary to power the device
on and off.
This driver controls that signalling for a number of different devices.
It can
-
Am 20.03.2015 um 09:54 schrieb NeilBrown ne...@suse.de:
On Fri, 20 Mar 2015 08:54:38 +0100 Dr. H. Nikolaus Schaller
h...@goldelico.com wrote:
Am 18.03.2015 um 06:58 schrieb NeilBrown n...@brown.name:
If a platform has a particular device permanently attached to a UART,
there may
Hi,
Am 20.03.2015 um 14:08 schrieb Sebastian Reichel s...@kernel.org:
Hi,
On Fri, Mar 20, 2015 at 09:54:21AM +0100, Dr. H. Nikolaus Schaller wrote:
[...]
And we do not write a driver for the w2sg0004 but the regulator inside that
chip.
DT describes the hardware structure
Hi,
Am 20.03.2015 um 09:43 schrieb NeilBrown ne...@suse.de:
On Fri, 20 Mar 2015 08:54:35 +0100 Dr. H. Nikolaus Schaller
h...@goldelico.com wrote:
Hi Neil,
Am 18.03.2015 um 06:58 schrieb NeilBrown n...@brown.name:
Hi again,
here is version 3 of support for tty-slaves.
This version
Am 11.03.2015 um 17:44 schrieb Tony Lindgren t...@atomide.com:
* Dr. H. Nikolaus Schaller h...@goldelico.com [150311 09:17]:
Hi,
Am 11.03.2015 um 16:24 schrieb Tony Lindgren t...@atomide.com:
Hi,
* Marek Belisko ma...@goldelico.com [150310 14:28]:
Signed-off-by: Marek Belisko ma
Hi,
Am 11.03.2015 um 16:24 schrieb Tony Lindgren t...@atomide.com:
Hi,
* Marek Belisko ma...@goldelico.com [150310 14:28]:
Signed-off-by: Marek Belisko ma...@goldelico.com
---
.../bindings/power_supply/twl4030_madc_battery.txt | 43
++
1 file changed, 43
Hi,
Am 21.03.2015 um 00:31 schrieb NeilBrown ne...@suse.de:
On Fri, 20 Mar 2015 10:34:18 +0100 Dr. H. Nikolaus Schaller
h...@goldelico.com wrote:
Am 20.03.2015 um 09:54 schrieb NeilBrown ne...@suse.de:
There needs to be one device-node for each device, and that device-node
needs
Hi,
Am 25.03.2015 um 02:45 schrieb Sebastian Reichel s...@kernel.org:
Hi,
On Tue, Mar 24, 2015 at 06:58:15PM +0100, Dr. H. Nikolaus Schaller wrote:
So you propose that the parent-child relationship is “control”? I.e. some
channel which allows to address some bus client (through reg
Hi,
Am 25.03.2015 um 16:21 schrieb Sebastian Reichel s...@kernel.org:
Hi,
On Wed, Mar 25, 2015 at 08:59:14AM +0100, Dr. H. Nikolaus Schaller wrote:
Am 25.03.2015 um 02:45 schrieb Sebastian Reichel s...@kernel.org:
On Tue, Mar 24, 2015 at 06:58:15PM +0100, Dr. H. Nikolaus Schaller wrote
Hi,
Am 25.03.2015 um 21:42 schrieb Pavel Machek pa...@ucw.cz:
Hi!
In the case of our GPS, it receives control over the serial connection from
the UART,
Ahem - does it?
AFAIK the chip simply starts to emit NMEA records if powered on. There is no
command going over the serial interface
Am 25.03.2015 um 21:53 schrieb Pavel Machek pa...@ucw.cz:
Hi!
AFAIK the chip simply starts to emit NMEA records if powered on.
There is no command going over the serial interface to address it
or control it.
Right, since GPS basically doesn't need any configuration/control.
That’s not
Am 26.03.2015 um 11:41 schrieb Belisko Marek marek.beli...@gmail.com:
On Thu, Mar 26, 2015 at 10:53 AM, Greg KH gre...@linuxfoundation.org wrote:
On Wed, Mar 25, 2015 at 09:53:34PM +0100, Marek Belisko wrote:
From: H. Nikolaus Schaller h...@goldelico.com
While trying to test the Pyra GSM
Hi Johan,
Am 30.03.2015 um 09:45 schrieb Johan Hovold jo...@kernel.org:
On Sat, Mar 28, 2015 at 02:37:57PM +0100, Marek Belisko wrote:
From: H. Nikolaus Schaller h...@goldelico.com
While trying to test the Pyra GSM/GPS/3G module I had reconfigured
the USB interface by mistake and therefore
Am 30.03.2015 um 11:32 schrieb Dr. H. Nikolaus Schaller h...@goldelico.com:
Hi Johan,
Am 30.03.2015 um 09:45 schrieb Johan Hovold jo...@kernel.org:
On Sat, Mar 28, 2015 at 02:37:57PM +0100, Marek Belisko wrote:
From: H. Nikolaus Schaller h...@goldelico.com
While trying to test
Hi Pavel,
Am 31.03.2015 um 09:26 schrieb Pavel Machek pa...@ucw.cz:
Hi!
+ io-channels = twl_madc 1,
+ twl_madc 10,
+ twl_madc 12;
+ io-channel-names = temp,
+ichg,
+vbat;
Hi,
Am 26.03.2015 um 19:08 schrieb Sebastian Reichel s...@kernel.org:
Hi,
On Wed, Mar 25, 2015 at 05:44:42PM +0100, Dr. H. Nikolaus Schaller wrote:
Am 25.03.2015 um 16:21 schrieb Sebastian Reichel s...@kernel.org:
On Wed, Mar 25, 2015 at 08:59:14AM +0100, Dr. H. Nikolaus Schaller wrote
Am 04.03.2015 um 07:35 schrieb NeilBrown ne...@suse.de:
On Mon, 2 Mar 2015 22:04:31 +0100 Pavel Machek pa...@ucw.cz wrote:
Hi!
The twl4030 phy can measure, with low precision, the
resistance-to-ground of the ID pin.
Add a function to read the value, and export the result
via sysfs.
I have tested it with
X.Org X Server 1.12.4
Release Date: 2012-08-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.2.0-4-mx5 armv7l Debian
(coming from Debian Wheezy) on:
* gta04 (SPI panel)
* openpandora (SPI panel)
* BeagleBoard XM (with RGB panel)
* PandaBoard ES (w/o
Am 27.03.2015 um 17:31 schrieb Sebastian Reichel s...@kernel.org:
Hi,
On Fri, Mar 27, 2015 at 10:22:11AM +0100, Dr. H. Nikolaus Schaller wrote:
Coming back at my sentence: I asked about a non-trivial, non-bus
connected HW, which has a DT binding.
from omap3-beagle-xm.dts:
hsusb2_phy
Hi,
Am 26.03.2015 um 06:56 schrieb Pavel Machek pa...@ucw.cz:
Hi!
Main reason is, that I would need to go
through the UART to “communicate with the w2sg0004.
You can always communicate” through the UART. Even without DT. As long as
the connected chip is powered up by any means (could be
Am 02.04.2015 um 12:35 schrieb Johan Hovold jo...@kernel.org:
On Thu, Apr 02, 2015 at 12:12:37PM +0200, Jonathan Corbet wrote:
On Sat, 28 Mar 2015 14:37:57 +0100
Marek Belisko ma...@goldelico.com wrote:
This patch changes the documentation file as needed.
Applied to the docs tree (with
Hi Pavel,
Am 27.04.2015 um 22:35 schrieb Pavel Machek pa...@ucw.cz:
Hi!
In my opinion making something a node in / is always the
last resort and in my perspective it has been handled in such a way
so far.
But that contradicts some documents I have found and linked. Please
show me a
Hi Peter,
Am 05.05.2015 um 21:54 schrieb Peter Hurley pe...@hurleysoftware.com:
Hi Neil,
On 03/18/2015 01:58 AM, NeilBrown wrote:
here is version 3 of support for tty-slaves.
Is there a v4 of this that I missed?
We did have a lengthy discussion about [PATCH 3/3] how to best (1)
Hi Peter,
Am 06.05.2015 um 14:05 schrieb Peter Hurley pe...@hurleysoftware.com:
On 05/06/2015 07:50 AM, Dr. H. Nikolaus Schaller wrote:
No, I am not playing devil’s advocate (which would imply that I am doing this
for fun to tease the dog), but I feel I have to be the advocate of future
Hi Mark,
Am 06.05.2015 um 14:36 schrieb Mark Rutland mark.rutl...@arm.com:
On Wed, May 06, 2015 at 01:27:03PM +0100, Dr. H. Nikolaus Schaller wrote:
Hi Peter,
Am 06.05.2015 um 14:05 schrieb Peter Hurley pe...@hurleysoftware.com:
On 05/06/2015 07:50 AM, Dr. H. Nikolaus Schaller wrote
Hi Pavel,
Am 06.05.2015 um 11:27 schrieb Pavel Machek pa...@ucw.cz:
On Wed 2015-05-06 07:19:31, Dr. H. Nikolaus Schaller wrote:
Hi Peter,
Am 05.05.2015 um 21:54 schrieb Peter Hurley pe...@hurleysoftware.com:
Hi Neil,
On 03/18/2015 01:58 AM, NeilBrown wrote:
here is version 3
Hi Mark,
Am 06.05.2015 um 19:18 schrieb Mark Rutland mark.rutl...@arm.com:
On Wed, May 06, 2015 at 05:09:20PM +0100, Dr. H. Nikolaus Schaller wrote:
Hi Mark,
Am 06.05.2015 um 16:15 schrieb Mark Rutland mark.rutl...@arm.com:
No, I am not playing devil’s advocate (which would imply that I
Am 07.05.2015 um 16:30 schrieb Peter Hurley pe...@hurleysoftware.com:
On 05/07/2015 08:46 AM, Dr. H. Nikolaus Schaller wrote:
Am 06.05.2015 um 19:18 schrieb Mark Rutland mark.rutl...@arm.com:
On Wed, May 06, 2015 at 05:09:20PM +0100, Dr. H. Nikolaus Schaller wrote:
Am 06.05.2015 um 16:15
Hi Mark,
Am 06.05.2015 um 16:15 schrieb Mark Rutland mark.rutl...@arm.com:
No, I am not playing devil’s advocate (which would imply that I am doing
this
for fun to tease the dog), but I feel I have to be the advocate of
future board
designers who want to easily import an existing board DT
Hi Pavel,
Am 06.05.2015 um 16:28 schrieb Pavel Machek pa...@ucw.cz:
On Wed 2015-05-06 13:50:29, Dr. H. Nikolaus Schaller wrote:
Hi Pavel,
Am 06.05.2015 um 11:27 schrieb Pavel Machek pa...@ucw.cz:
On Wed 2015-05-06 07:19:31, Dr. H. Nikolaus Schaller wrote:
Hi Peter,
Am 05.05.2015 um
Am 07.05.2015 um 16:56 schrieb Peter Hurley pe...@hurleysoftware.com:
On 05/07/2015 08:46 AM, Dr. H. Nikolaus Schaller wrote:
So I don’t think that being able to control the slave is a common property
of all UART-slave connections.
BTW: the GPS chip we use is doing something without any
Hi Peter,
Am 07.05.2015 um 17:51 schrieb Peter Hurley pe...@hurleysoftware.com:
On 05/07/2015 11:34 AM, Dr. H. Nikolaus Schaller wrote:
Am 07.05.2015 um 16:56 schrieb Peter Hurley pe...@hurleysoftware.com:
On 05/07/2015 08:46 AM, Dr. H. Nikolaus Schaller wrote:
Both devicetree and tty
Hi,
Am 07.05.2015 um 18:18 schrieb Peter Hurley pe...@hurleysoftware.com:
On 05/07/2015 11:11 AM, Dr. H. Nikolaus Schaller wrote:
Am 07.05.2015 um 16:30 schrieb Peter Hurley pe...@hurleysoftware.com:
On 05/07/2015 08:46 AM, Dr. H. Nikolaus Schaller wrote:
Am 06.05.2015 um 19:18 schrieb
Hi Krzysztof,
Am 18.05.2015 um 14:32 schrieb Krzysztof Kozlowski k.kozlow...@samsung.com:
2015-05-18 18:40 GMT+09:00 Dr. H. Nikolaus Schaller h...@goldelico.com:
Hi,
we tried to upgrade from 4.0 to 4.1-rc3 kernel and ran into a NULL pointer
problem within the bq27x00 driver.
It appears
Am 18.05.2015 um 16:09 schrieb Krzysztof Kozlowski k.kozlow...@samsung.com:
2015-05-18 22:30 GMT+09:00 Dr. H. Nikolaus Schaller h...@goldelico.com:
Hi Krzysztof,
Am 18.05.2015 um 14:32 schrieb Krzysztof Kozlowski k.kozlow...@samsung.com:
2015-05-18 18:40 GMT+09:00 Dr. H. Nikolaus
1 - 100 of 2084 matches
Mail list logo
