On 3/14/2013 4:07 PM, Philip Avinash wrote:
da850 platforms require TBCLK synchronization in CFG_CHIP1 register for
TBCLK enable in EHRPWM modules. Enabling of TBCLK is done only if EHRPWM
DT node status is set to okay DT blob.
Also adds macro definitions for DA8XX_EHRPWM_TBCLKSYNC and
On 3/14/2013 9:14 PM, Peter Korsgaard wrote:
Sekhar == Sekhar Nori nsek...@ti.com writes:
Required properties:
-- compatible: Must be ti,am33xx-ecap
+- compatible: Must be ti,am33xx-ecap or ti,da850-ecap
- #pwm-cells: Should be 3. Number of cells being used to specify PWM
property
On 3/15/2013 10:27 AM, Philip, Avinash wrote:
On Thu, Mar 14, 2013 at 18:31:52, Nori, Sekhar wrote:
On 3/14/2013 4:07 PM, Philip Avinash wrote:
da850 platforms require TBCLK synchronization in CFG_CHIP1 register for
TBCLK enable in EHRPWM modules. Enabling of TBCLK is done only if EHRPWM
DT
On 3/15/2013 10:51 AM, Philip, Avinash wrote:
On Fri, Mar 15, 2013 at 10:38:58, Nori, Sekhar wrote:
On 3/15/2013 10:27 AM, Philip, Avinash wrote:
On Thu, Mar 14, 2013 at 18:31:52, Nori, Sekhar wrote:
On 3/14/2013 4:07 PM, Philip Avinash wrote:
da850 platforms require TBCLK synchronization in
Hi Mark,
On 3/7/2013 11:56 AM, Vishwanathrao Badarkhe, Manish wrote:
Add device tree data for regulator via tps6507x mfd device
in da850-evm.
Applies on top of v3.9-rc1 of linus tree.
I would like to take this series via the davinci tree to manage
dependencies with rest of the DT patches.
-by: Sekhar Nori nsek...@ti.com
Thanks,
Sekhar
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
On 3/15/2013 8:41 PM, Prabhakar lad wrote:
From: Lad, Prabhakar prabhakar.cse...@gmail.com
Create platform devices for various video modules like venc,osd,
vpbe and v4l2 driver for dm365.
Signed-off-by: Lad, Prabhakar prabhakar.cse...@gmail.com
---
On 3/16/2013 3:47 PM, Prabhakar lad wrote:
From: Lad, Prabhakar prabhakar.cse...@gmail.com
Create platform devices for various video modules like venc,osd,
vpbe and v4l2 driver for dm355.
Signed-off-by: Lad, Prabhakar prabhakar.cse...@gmail.com
Comments on the DM365 series apply to this
On 3/18/2013 2:46 PM, Prabhakar Lad wrote:
On Mon, Mar 18, 2013 at 1:48 PM, Sekhar Nori nsek...@ti.com wrote:
On 3/15/2013 8:41 PM, Prabhakar lad wrote:
+int __init dm365_init_video(struct vpfe_config *vpfe_cfg,
+ struct vpbe_config *vpbe_cfg
On 10/29/2012 12:54 AM, Linus Walleij wrote:
On Thu, Oct 25, 2012 at 6:11 PM, Murali Karicheri m-kariche...@ti.com wrote:
This is the driver for the Power Sleep Controller (PSC) hardware
found on DM SoCs as well Keystone SoCs (c6x). This driver borrowed
code from arch/arm/mach-davinci/psc.c
On 3/20/2013 12:11 PM, Philip Avinash wrote:
DAVINCI clock framework currently not supporting clock enable/disable
functionality on clock nodes. In DAVINCI platform EHRPWM module requires
Wrong. clock enable/disable is supported in the DaVinci clock
implementation, but just for PSC clocks.
On 3/20/2013 12:11 PM, Philip Avinash wrote:
Add clock node support for ECAP and EHRPWM modules.
Also adds TBCLK for EHRWPM TBCLK to comply with pwm-tiehrpwm
driver.
Signed-off-by: Philip Avinash avinashphi...@ti.com
---
Changes Since v1:
- TBCLK make it as actual clock with
On 3/20/2013 12:11 PM, Philip Avinash wrote:
Add da850 EHRPWM ECAP DT node.
Also adds OF_DEV_AUXDATA for EHRPWM ECAP driver to use EHRPWM ECAP
clock.
Signed-off-by: Philip Avinash avinashphi...@ti.com
---
Changes since v1:
- Reusing ti,am33xxecap/ehrpwm as compatible field as
On 3/21/2013 1:31 PM, Philip, Avinash wrote:
On Wed, Mar 20, 2013 at 18:17:59, Peter Korsgaard wrote:
Sekhar == Sekhar Nori nsek...@ti.com writes:
Sekhar On 3/20/2013 12:11 PM, Philip Avinash wrote:
Add da850 EHRPWM ECAP DT node.
Also adds OF_DEV_AUXDATA for EHRPWM ECAP driver to use
Mike,
On 11/28/2012 6:52 PM, Sekhar Nori wrote:
On 11/27/2012 10:59 PM, Mike Turquette wrote:
Also have you looked into regmap? Since you are defining your own clock
type that might be something nice for you.
No, haven't looked at regmap yet. Will look at that.
I could get to this only
On 3/22/2013 1:23 PM, Prabhakar lad wrote:
From: Lad, Prabhakar prabhakar.cse...@gmail.com
By default the VPSS clocks are only enabled in capture driver
for davinci family which creates duplicates. This
patch adds support to enable the VPSS clocks in VPSS driver.
This avoids duplication of
On 3/22/2013 1:23 PM, Prabhakar lad wrote:
From: Lad, Prabhakar prabhakar.cse...@gmail.com
The vpss clocks were enabled by calling a exported function from a driver
in a machine code. calling driver code from platform code is incorrect way.
This patch fixes this issue and calls the
Prabhakar,
On 3/22/2013 1:33 PM, Prabhakar lad wrote:
From: Lad, Prabhakar prabhakar.cse...@gmail.com
Create platform devices for various video modules like venc,osd,
vpbe and v4l2 driver for dm365.
Signed-off-by: Lad, Prabhakar prabhakar.cse...@gmail.com
---
Hi Mike,
On 3/23/2013 2:07 AM, Mike Turquette wrote:
Quoting Sekhar Nori (2013-03-22 04:20:28)
Mike,
On 11/28/2012 6:52 PM, Sekhar Nori wrote:
On 11/27/2012 10:59 PM, Mike Turquette wrote:
Also have you looked into regmap? Since you are defining your own clock
type that might
On 3/25/2013 1:19 PM, Philip Avinash wrote:
Add platform support for EHRPWM and ECAP by providing clock nodes and
device tree nodes.
This series depends on [1] and [2] and is available for testing at [3].
Tested for back light support in da850 EVM with EHRPWM PWM device.
[1]
On 3/24/2013 8:59 PM, Viresh Kumar wrote:
Some assignments of policy- min/max/cur/cpuinfo.min_freq/cpuinfo.max_freq
aren't required as part of it is done by cpufreq driver or cpufreq core.
Remove them.
At some places we merge multiple lines together too.
Cc: Sekhar Nori nsek...@ti.com
On 3/25/2013 2:15 PM, Viresh Kumar wrote:
On 25 March 2013 14:06, Sekhar Nori nsek...@ti.com wrote:
There is a line in the code a little above the ones you deleted that
also sets these same variables. I guess you were relying on that line to
set policy-cur, but that also sets policy-{min, max
On 3/25/2013 3:44 PM, Prabhakar Lad wrote:
Hi Sekhar,
Thanks for the review!
On Mon, Mar 25, 2013 at 11:02 AM, Sekhar Nori nsek...@ti.com wrote:
On 3/22/2013 1:23 PM, Prabhakar lad wrote:
From: Lad, Prabhakar prabhakar.cse...@gmail.com
By default the VPSS clocks are only enabled
On 3/25/2013 3:52 PM, Prabhakar Lad wrote:
Hi Sekhar,
Thanks for the review!
On Mon, Mar 25, 2013 at 11:42 AM, Sekhar Nori nsek...@ti.com wrote:
Prabhakar,
On 3/22/2013 1:33 PM, Prabhakar lad wrote:
From: Lad, Prabhakar prabhakar.cse...@gmail.com
Create platform devices for various
On 3/25/2013 3:45 PM, Prabhakar Lad wrote:
Hi Sekhar,
On Mon, Mar 25, 2013 at 11:09 AM, Sekhar Nori nsek...@ti.com wrote:
On 3/22/2013 1:23 PM, Prabhakar lad wrote:
From: Lad, Prabhakar prabhakar.cse...@gmail.com
The vpss clocks were enabled by calling a exported function from a driver
On 3/25/2013 3:54 PM, Viresh Kumar wrote:
On 25 March 2013 15:11, Sekhar Nori nsek...@ti.com wrote:
So down in the cpufreq driver probe below, we bail out if freq_table is
not provided. So all this checking for freq_table in the code you pasted
above is superfluous. If you can clean that part
On 3/25/2013 4:51 PM, Prabhakar lad wrote:
From: Lad, Prabhakar prabhakar.cse...@gmail.com
This patches replaces #if defined() by IS_ENABLED macro, which provides
better readability.
Signed-off-by: Lad, Prabhakar prabhakar.cse...@gmail.com
Cc: Sekhar Nori nsek...@ti.com
Queuing
Hi Viresh,
On 3/25/2013 3:41 PM, Viresh Kumar wrote:
This patch moves cpufreq driver of ARM based davinci platform to
drivers/cpufreq.
Cc: Sekhar Nori nsek...@ti.com
Cc: davinci-linux-open-sou...@linux.davincidsp.com
Signed-off-by: Viresh Kumar viresh.ku...@linaro.org
I am unable to apply
On 3/27/2013 3:51 PM, Viresh Kumar wrote:
On 27 March 2013 15:47, Sekhar Nori nsek...@ti.com wrote:
On 3/25/2013 3:41 PM, Viresh Kumar wrote:
I am unable to apply this patch for testing. Looks like this could be
because of:
Content-Type: text/plain; charset=WINDOWS-1252
Can you get rid
On 3/27/2013 3:51 PM, Viresh Kumar wrote:
On 27 March 2013 15:47, Sekhar Nori nsek...@ti.com wrote:
On 3/25/2013 3:41 PM, Viresh Kumar wrote:
I am unable to apply this patch for testing. Looks like this could be
because of:
Content-Type: text/plain; charset=WINDOWS-1252
Can you get rid
/platform/davinci/vpif_capture.ko] undefined!
ERROR: vpif_base [drivers/media/platform/davinci/vpif_capture.ko] undefined!
make[1]: *** [__modpost] Error 1
Reported-by: Sekhar Nori nsek...@ti.com
Signed-off-by: Lad, Prabhakar prabhakar@ti.com
---
drivers/media/platform/davinci/vpif.c |4
On 3/8/2013 3:15 PM, Prabhakar Lad wrote:
Sekhar,
On Mon, Feb 4, 2013 at 11:20 PM, Sekhar Nori nsek...@ti.com wrote:
On 2/4/2013 10:37 AM, Prabhakar Lad wrote:
Sekhar ,
On Sun, Feb 3, 2013 at 5:33 PM, Sekhar Nori nsek...@ti.com wrote:
On 1/28/2013 7:17 PM, Prabhakar Lad wrote:
From: Lad
0x35 0x2c 0x76 0x70 0x62 0x65 0x2d 0x76 0x65 0x6e 0x63
0x00 0x00 0x00 0x00 0x00 0x03 0x00 0x00 0x00
FATAL: drivers/media/platform/davinci/vpbe_venc: struct platform_device_id is
not terminated with a NULL entry!
make[1]: *** [__modpost] Error 1
Reported-by: Sekhar Nori nsek...@ti.com
mpor...@ti.com
Acked-by: Sekhar Nori nsek...@ti.com
---
arch/arm/common/edma.c | 300
++--
arch/arm/mach-omap2/Kconfig|1 +
include/linux/platform_data/edma.h |1 +
3 files changed, 292 insertions(+), 10 deletions(-)
diff --git
On 3/6/2013 9:45 PM, Matt Porter wrote:
The binding definition is based on the generic DMA controller
binding.
Signed-off-by: Matt Porter mpor...@ti.com
Okay the bindings the documented after they are used leading to some
confusion. This patch should be moved up the series. As I noted in my
On 3/4/2013 3:21 PM, Russell King - ARM Linux wrote:
Last nights automated ARM build found the following errors with randconfig.
All information as usual at http://www.arm.linux.org.uk/developer/build/
Versatile randconfig:
ERROR: irq_domain_add_simple [drivers/gpio/gpio-em.ko]
On 3/7/2013 11:31 AM, Greg Kroah-Hartman wrote:
On Wed, Mar 06, 2013 at 09:20:45PM -0800, David Brown wrote:
Greg Kroah-Hartman gre...@linuxfoundation.org writes:
On Wed, Mar 06, 2013 at 04:29:42PM -0800, David Brown wrote:
+menu Qualcomm MSM SSBI bus support
+ depends on ARCH_MSM
Why?
On 11/6/2012 3:27 AM, Murali Karicheri wrote:
On 11/04/2012 09:05 AM, Sekhar Nori wrote:
[...]
I pushed the patches I fixed to devel-common-clk branch of my git tree.
It is build tested using davinci_all_defconfig but its not runtime
tested.
Can you start from here and provide me
On 12/3/2012 1:51 PM, Prabhakar Lad wrote:
From: Manjunath Hadli manjunath.ha...@ti.com
Create platform devices for various video modules like venc,osd,
vpbe and v4l2 driver for dm365.
Signed-off-by: Manjunath Hadli manjunath.ha...@ti.com
Signed-off-by: Lad, Prabhakar prabhakar@ti.com
On 12/3/2012 1:51 PM, Prabhakar Lad wrote:
From: Manjunath Hadli manjunath.ha...@ti.com
add support for V4L2 video display to DM365 EVM.
Support for SD and ED modes is provided, along with Composite
and Component outputs.
Signed-off-by: Manjunath Hadli manjunath.ha...@ti.com
Hi Avinash,
On 11/29/2012 5:16 PM, Philip, Avinash wrote:
Update number of errors using nand ecc strength.
Also add macro definitions BCH8_ERROR_MAX BCH4_ERROR_MAX
Can you please describe why the original method of setting nerrors was
incorrect? Was it causing any issues in any particular
On 2/6/2013 9:30 AM, Kumar, Anil wrote:
Add da850 wdt DT node.
Add OF_DEV_AUXDATA for wdt driver to use wdt clock.
Signed-off-by: Kumar, Anil anilkuma...@ti.com
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -37,11 +37,17 @@ static void __init
On 2/6/2013 9:30 AM, Kumar, Anil wrote:
In non DT case da8xx_register_watchdog() is called to register platform device
da8xx_wdt_device by board file. But in DT case it is not called and wdt
device get registered via wdt DT node.
Currently code is passing platform device da8xx_wdt_device in
On 2/8/2013 8:05 AM, Kumar, Anil wrote:
On Thu, Feb 07, 2013 at 23:20:48, Nori, Sekhar wrote:
On 2/7/2013 9:02 AM, Kumar, Anil wrote:
Update the code to use devm_* API so that driver
core will manage resources.
Signed-off-by: Kumar, Anil anilkuma...@ti.com
diff --git
Hi Matt,
This version introduces build/bisect issues.
On 2/1/2013 11:52 PM, Matt Porter wrote:
Move mach-davinci/dma.c to common/edma.c so it can be used
by OMAP (specifically AM33xx) as well.
Signed-off-by: Matt Porter mpor...@ti.com
Acked-by: Sekhar Nori nsek...@ti.com
diff --git
is never registered in DT case.
While at it, also make da8xx_wdt_device static since there is no need
for it to be globally visible.
Tested machine reboot with both DT and non-DT boot on DA850 EVM.
Signed-off-by: Kumar, Anil anilkuma...@ti.com
Signed-off-by: Sekhar Nori nsek...@ti.com
---
arch/arm
On 2/7/2013 1:27 PM, Manjunathappa, Prakash wrote:
Populate OF_DEV_AUXDATA with desired device name expected by
davinci_mmc driver. Without this clk_get of davinci_mmc DT driver
fails.
But there is no mmc DT support for DaVinci at this time. This patch
should come after the driver DT support
, Prakash prakash...@ti.com
Cc: linux-...@vger.kernel.org
Cc: linux-arm-ker...@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: davinci-linux-open-sou...@linux.davincidsp.com
Cc: devicetree-disc...@lists.ozlabs.org
Cc: c...@laptop.org
Cc: Sekhar Nori nsek...@ti.com
Cc: mpor...@ti.com
On 2/3/2013 6:15 PM, Sekhar Nori wrote:
On 1/28/2013 7:17 PM, Prabhakar Lad wrote:
From: Lad, Prabhakar prabhakar@ti.com
There are couple of issues with this implementation.
1) da8xx_config_emac() is specific to DA850 EVM, but masquerades as
generic for da8xx. Looks like you need
] ARM: davinci: da850: add wdt DT node
Add da850 wdt DT node.
Signed-off-by: Kumar, Anil anilkuma...@ti.com
Signed-off-by: Sekhar Nori nsek...@ti.com
---
arch/arm/boot/dts/da850-evm.dts |3 +++
arch/arm/boot/dts/da850.dtsi |5 +
arch/arm/mach-davinci/da8xx-dt.c |8 +++-
3
On 2/4/2013 10:37 AM, Prabhakar Lad wrote:
Sekhar ,
On Sun, Feb 3, 2013 at 5:33 PM, Sekhar Nori nsek...@ti.com wrote:
On 1/28/2013 7:17 PM, Prabhakar Lad wrote:
From: Lad, Prabhakar prabhakar@ti.com
Add eth0 device tree node information and pinmux for mii to da850 by
providing
On 2/5/2013 1:54 PM, Vishwanathrao Badarkhe, Manish wrote:
Update the code to use devm_* API so that driver
core will manage resources.
Signed-off-by: Vishwanathrao Badarkhe, Manish manish...@ti.com
You can use devm_clk_get() as well. We should also move to runtime PM
but that can be a
On 2/6/2013 3:06 PM, Vishwanathrao Badarkhe, Manish wrote:
Add I2C0 device tree and pin muxing information to da850-evm.
Also, add OF_DEV_AUXDATA for I2C0 controller driver in da850
board dt file to use I2C0 clock.
Verified i2c0 node gets created in sys class interface as
On 2/7/2013 9:02 AM, Kumar, Anil wrote:
Update the code to use devm_* API so that driver
core will manage resources.
Signed-off-by: Kumar, Anil anilkuma...@ti.com
---
This patch applies on top of v3.8-rc6.
Tested on da850 EVM.
:100644 100644 e8e8724... 6ad76a3... M
On 1/31/2013 2:56 PM, Vishwanathrao Badarkhe, Manish wrote:
As per OMAP-L138 TRM, Software must poll for
SLEEPCOMPLETE bit until it is set to 1 before clearing
SLEEPENABLE bit in DEEPSLEEP register in resume routine.
Modifications are as per datasheet:
On 1/29/2013 4:29 PM, Linus Walleij wrote:
On Tue, Jan 29, 2013 at 8:38 AM, Vishwanathrao Badarkhe, Manish
manish...@ti.com wrote:
Currently, I2C driver gets probed before pinctrl driver.
To achieve I2C pin muxing via pinctrl driver before I2C
probe get called, register pinctrl driver in
: linux-arm-ker...@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: davinci-linux-open-sou...@linux.davincidsp.com
Cc: net...@vger.kernel.org
Cc: devicetree-disc...@lists.ozlabs.org
Cc: Sekhar Nori nsek...@ti.com
Cc: Heiko Schocher h...@denx.de
---
arch/arm/mach-davinci/da850.c
: linux-kernel@vger.kernel.org
Cc: davinci-linux-open-sou...@linux.davincidsp.com
Cc: net...@vger.kernel.org
Cc: devicetree-disc...@lists.ozlabs.org
Cc: Sekhar Nori nsek...@ti.com
Cc: Heiko Schocher h...@denx.de
---
arch/arm/boot/dts/da850-evm.dts |3 +++
arch/arm/boot/dts/da850.dtsi
...@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: davinci-linux-open-sou...@linux.davincidsp.com
Cc: net...@vger.kernel.org
Cc: devicetree-disc...@lists.ozlabs.org
Cc: Sekhar Nori nsek...@ti.com
Cc: Heiko Schocher h...@denx.de
---
arch/arm/boot/dts/da850-evm.dts |5 +
arch/arm
, Prabhakar prabhakar@ti.com
Cc: linux-arm-ker...@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: davinci-linux-open-sou...@linux.davincidsp.com
Cc: net...@vger.kernel.org
Cc: devicetree-disc...@lists.ozlabs.org
Cc: Sekhar Nori nsek...@ti.com
Cc: Heiko Schocher h...@denx.de
On 1/29/2013 1:08 PM, Vishwanathrao Badarkhe, Manish wrote:
Add I2C0 device tree node information to da850-evm.
Also, add I2C0 pin muxing information in da850-evm.
Signed-off-by: Vishwanathrao Badarkhe, Manish manish...@ti.com
---
Changes since V1:
- Updated i2c0 node names in dts and
On 2/3/2013 3:43 PM, Prabhakar Lad wrote:
Hi Sylwester,
Thanks for the review.
On Sat, Feb 2, 2013 at 4:07 AM, Sylwester Nawrocki
sylvester.nawro...@gmail.com wrote:
Hi Prabhakar,
On 01/29/2013 02:07 PM, Prabhakar Lad wrote:
[...]
diff --git
...@ti.com
Cc: linux-...@vger.kernel.org
Cc: linux-arm-ker...@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: davinci-linux-open-sou...@linux.davincidsp.com
Cc: devicetree-disc...@lists.ozlabs.org
Cc: c...@laptop.org
Cc: Sekhar Nori nsek...@ti.com
---
Since v2:
Rebased on top of v3.9/dt-2
...@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: davinci-linux-open-sou...@linux.davincidsp.com
Cc: net...@vger.kernel.org
Cc: devicetree-disc...@lists.ozlabs.org
Cc: Sekhar Nori nsek...@ti.com
Cc: Heiko Schocher h...@denx.de
---
arch/arm/boot/dts/da850-evm.dts |3 +++
arch/arm/boot/dts
@vger.kernel.org
Cc: davinci-linux-open-sou...@linux.davincidsp.com
Cc: net...@vger.kernel.org
Cc: devicetree-disc...@lists.ozlabs.org
Cc: Sekhar Nori nsek...@ti.com
Cc: Heiko Schocher h...@denx.de
---
arch/arm/mach-davinci/da8xx-dt.c |9 -
1 files changed, 8 insertions(+), 1 deletions
On 1/25/2013 11:43 AM, Mrugesh Katepallewar wrote:
Add RTC DT entries in da850 dts file.
Signed-off-by: Mrugesh Katepallewar mrugesh...@ti.com
---
Applies on top of v3.8-rc4 of linus tree.
Tested on da850-evm device.
Test Procedure:
date [.]MM.DD-hh:mm[:ss]
hwclock -w
reset
On 1/24/2013 5:05 PM, Vishwanathrao Badarkhe, Manish wrote:
Add I2C0 device tree node information to da850-evm.
Also, add I2C0 pin muxing information in da850-evm.
Signed-off-by: Vishwanathrao Badarkhe, Manish manish...@ti.com
---
Depends on patch
On 1/25/2013 4:34 PM, Katepallewar, Mrugesh wrote:
On Fri, Jan 25, 2013 at 16:04:22, Nori, Sekhar wrote:
On 1/25/2013 11:43 AM, Mrugesh Katepallewar wrote:
Add RTC DT entries in da850 dts file.
Signed-off-by: Mrugesh Katepallewar mrugesh...@ti.com
---
Applies on top of v3.8-rc4 of linus
Cc: linux-arm-ker...@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: davinci-linux-open-sou...@linux.davincidsp.com
Cc: devicetree-disc...@lists.ozlabs.org
Cc: Sekhar Nori nsek...@ti.com
Cc: Heiko Schocher h...@denx.de
---
Looks good to me. Queuing for v3.9. BTW, we are moving
Hi Mrugesh,
On 1/28/2013 1:17 PM, Mrugesh Katepallewar wrote:
Add RTC DT entries in da850 dts file.
Signed-off-by: Mrugesh Katepallewar mrugesh...@ti.com
---
Applies on top of v3.8-rc4 of linus tree.
This patch is depending on
ARM: davinci: da850: add interrupt-parent property in soc
On 1/29/2013 1:05 PM, Katepallewar, Mrugesh wrote:
On Mon, Jan 28, 2013 at 21:32:13, Nori, Sekhar wrote:
Hi Mrugesh,
On 1/28/2013 1:17 PM, Mrugesh Katepallewar wrote:
Add RTC DT entries in da850 dts file.
Signed-off-by: Mrugesh Katepallewar mrugesh...@ti.com
---
Applies on top of v3.8-rc4
Hi Anil,
On 1/16/2013 2:37 PM, Kumar, Anil wrote:
Add NAND driver DT node and related pinctrl DT data to export NAND
functionality on da850 evm.
Signed-off-by: Kumar, Anil anilkuma...@ti.com
I applied all three patches in this series.
+ nand_cs3@6200 {
+ compatible =
for 3.8. Could you review and ACK it ?
The patch looks good to me. Feel free to add my
Acked-by: Sekhar Nori nsek...@ti.com
and merge through the media tree to ease the dependencies.
Thanks,
Sekhar
[1] http://patchwork.linuxtv.org/patch/16391/
Regards,
--Prabhakar
arch/arm/mach-davinci
Matt,
Sorry about the late reply. I noticed this mail only after I started to
look at v5 of your series :(
On 1/11/2013 5:21 AM, Matt Porter wrote:
On Sun, Oct 28, 2012 at 01:47:09PM +0530, Sekhar Nori wrote:
On 10/18/2012 6:56 PM, Matt Porter wrote:
Move mach-davinci/dma.c to common/edma.c
Hi Tony,
On 1/16/2013 2:02 AM, Matt Porter wrote:
This series adds DMA Engine support for AM33xx, which uses
an EDMA DMAC. The EDMA DMAC has been previously supported by only
a private API implementation (much like the situation with OMAP
DMA) found on the DaVinci family of SoCs.
Will you
Hi Mark,
On 1/23/2013 7:51 AM, Mark Brown wrote:
On Tue, Jan 22, 2013 at 09:26:34PM +0530, Sekhar Nori wrote:
On 1/16/2013 2:02 AM, Matt Porter wrote:
This series adds DMA Engine support for AM33xx, which uses
an EDMA DMAC. The EDMA DMAC has been previously supported by only
a private API
Matt,
On 1/24/2013 3:07 AM, Matt Porter wrote:
On Wed, Jan 23, 2013 at 10:21:42AM +0800, Mark Brown wrote:
On Tue, Jan 22, 2013 at 09:26:34PM +0530, Sekhar Nori wrote:
On 1/16/2013 2:02 AM, Matt Porter wrote:
This series adds DMA Engine support for AM33xx, which uses
an EDMA DMAC. The EDMA
On 1/15/2013 9:02 PM, Mike Turquette wrote:
Quoting Afzal Mohammed (2013-01-15 05:44:36)
LCDC IP has a clock divider to adjust pixel clock, this limits pixel
clock range to fck/255 - fck/2(fck - rate of input clock to LCDC IP).
In the case of AM335x, where this IP is present, default fck is
Manish,
On 1/31/2013 2:56 PM, Vishwanathrao Badarkhe, Manish wrote:
As per OMAP-L138 TRM, Software must poll for
SLEEPCOMPLETE bit until it is set to 1 before clearing
SLEEPENABLE bit in DEEPSLEEP register in resume routine.
Modifications are as per datasheet:
On 2/14/2013 10:46 AM, Vishwanathrao Badarkhe, Manish wrote:
Hi Sekhar,
On Thu, Feb 14, 2013 at 09:48:59, Nori, Sekhar wrote:
Manish,
On 1/31/2013 2:56 PM, Vishwanathrao Badarkhe, Manish wrote:
As per OMAP-L138 TRM, Software must poll for SLEEPCOMPLETE bit until
it is set to 1 before
-by: Lad, Prabhakar prabhakar@ti.com
Cc: Sekhar Nori nsek...@ti.com
---
+/* VPIF resource, platform data */
+static u64 da850_vpif_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource da850_vpif_resource[] = {
+ {
+ .start = DA8XX_VPIF_BASE,
+ .end
-by: Manjunath Hadli manjunath.ha...@ti.com
Signed-off-by: Lad, Prabhakar prabhakar@ti.com
Cc: Sekhar Nori nsek...@ti.com
---
arch/arm/mach-davinci/Kconfig |9 ++
arch/arm/mach-davinci/board-da850-evm.c | 178
+++
2 files changed, 187 insertions
Hi Prabhakar,
On 9/7/2012 11:04 PM, Prabhakar Lad wrote:
On Fri, Sep 7, 2012 at 10:48 PM, Sekhar Nori nsek...@ti.com wrote:
+static struct vpif_subdev_info da850_vpif_capture_sdev_info[] = {
+#if defined(CONFIG_DA850_UI_SD_VIDEO_PORT)
You agreed to get rid of these multiple ifdefs but you
Hi Matt,
On 8/23/2012 6:39 AM, Matt Porter wrote:
Removes use of the DaVinci EDMA private DMA API and replaces
it with use of the DMA engine API.
Signed-off-by: Matt Porter mpor...@ti.com
I tried testing this patch on my OMAP-L138 EVM, but SPI fails to
initialize after applying the patch.
Hi Matt,
On 8/30/2012 8:13 PM, Matt Porter wrote:
On Thu, Aug 30, 2012 at 07:46:32PM +0530, Sekhar Nori wrote:
Hi Matt,
On 8/23/2012 6:39 AM, Matt Porter wrote:
Removes use of the DaVinci EDMA private DMA API and replaces
it with use of the DMA engine API.
Signed-off-by: Matt Porter mpor
On 8/31/2012 10:01 PM, Vinod Koul wrote:
On Fri, 2012-08-31 at 21:32 +0530, Sekhar Nori wrote:
Hi Matt,
On 8/30/2012 8:13 PM, Matt Porter wrote:
On Thu, Aug 30, 2012 at 07:46:32PM +0530, Sekhar Nori wrote:
Hi Matt,
On 8/23/2012 6:39 AM, Matt Porter wrote:
Removes use of the DaVinci EDMA
a...@arndb.de
Cc: Kevin Hilman khil...@ti.com
Cc: Sekhar Nori nsek...@ti.com
Cc: Andrey Porodko pa...@chelcom.ru
Acked-by: Sekhar Nori nsek...@ti.com
Thanks,
Sekhar
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More
tree and needs
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg71644.html
(arm/dts: am33xx wdt node) to get applied cleanly
I tested patches 1-5 on AM18x EVM using rtcwake and hwclock commands.
Also tested on DT enabled AM18x EVM using hwclock.
For patched 1-5:
Acked-by: Sekhar Nori
On 8/17/2012 10:51 AM, Prabhakar Lad wrote:
Hi Laurent,
Thanks for the review.
On Thursday 16 August 2012 08:43 PM, Laurent Pinchart wrote:
Hi Prabhakar,
Thanks for the patch.
On Thursday 16 August 2012 19:32:00 Prabhakar Lad wrote:
From: Lad, Prabhakar prabhakar@ti.com
On 8/17/2012 2:45 PM, Laurent Pinchart wrote:
Hi Prabhakar,
On Friday 17 August 2012 14:02:19 Prabhakar Lad wrote:
On Friday 17 August 2012 11:07 AM, Sekhar Nori wrote:
On 8/17/2012 10:51 AM, Prabhakar Lad wrote:
On Thursday 16 August 2012 08:43 PM, Laurent Pinchart wrote:
On Thursday 16
Hi Linus,
On 7/17/2012 3:58 AM, Linus Walleij wrote:
On Sat, Jul 14, 2012 at 2:16 AM, Mike Turquette mturque...@linaro.org wrote:
'
This patch moves direct control of the MPU voltage regulator out of the
cpufreq driver .target callback and instead puts that logic into a clock
rate change
On 11/29/2012 5:16 PM, Philip, Avinash wrote:
The ELM hardware module can be used to speedup BCH 4/8/16 ECC scheme
error correction.
For now only 4 8 bit support is added
Signed-off-by: Philip, Avinash avinashphi...@ti.com
Cc: Grant Likely grant.lik...@secretlab.ca
Cc: Rob Herring
On 12/5/2012 6:13 PM, Philip, Avinash wrote:
On Wed, Dec 05, 2012 at 17:33:37, Nori, Sekhar wrote:
Hi Avinash,
On 11/29/2012 5:16 PM, Philip, Avinash wrote:
Update number of errors using nand ecc strength.
Also add macro definitions BCH8_ERROR_MAX BCH4_ERROR_MAX
Can you please describe
free to add my:
Acked-by: Sekhar Nori nsek...@ti.com
I assume you want to merge this from media tree to manage dependencies?
---
arch/arm/mach-davinci/board-dm644x-evm.c |8 ++--
arch/arm/mach-davinci/dm644x.c|7 +--
drivers/media/platform/davinci/vpbe.c
Hi Mike,
On 11/10/2012 7:52 AM, Mike Turquette wrote:
Quoting Murali Karicheri (2012-11-05 07:10:52)
On 11/03/2012 08:07 AM, Sekhar Nori wrote:
On 10/25/2012 9:41 PM, Murali Karicheri wrote:
This is the driver for the Power Sleep Controller (PSC) hardware
found on DM SoCs as well Keystone
Hi Vivien,
On 9/11/2012 5:59 AM, Vivien Didelot wrote:
Without this patch, da8xx_register_spi() registers the SPI board info,
the SPI controller, and sets its number of chipselect to the size of the
static spi_board_info array. This is bad because a SPI board info may
declare devices for
On 11/27/2012 10:59 PM, Mike Turquette wrote:
Quoting Sekhar Nori (2012-11-27 07:05:21)
Hi Mike,
On 11/10/2012 7:52 AM, Mike Turquette wrote:
Quoting Murali Karicheri (2012-11-05 07:10:52)
On 11/03/2012 08:07 AM, Sekhar Nori wrote:
On 10/25/2012 9:41 PM, Murali Karicheri wrote
On 12/10/2012 12:13 PM, Philip, Avinash wrote:
On Fri, Dec 07, 2012 at 16:07:23, Nori, Sekhar wrote:
On 11/29/2012 5:16 PM, Philip, Avinash wrote:
[...]
+struct device *elm_request(enum bch_ecc bch_type)
+{
+ struct elm_info *info;
+
+ list_for_each_entry(info, elm_devices, list) {
+
platform portion:
Acked-by: Sekhar Nori nsek...@ti.com
Thanks,
Sekhar
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http
Hi Matt,
On 9/29/2012 1:07 AM, Matt Porter wrote:
L3RAM (shared SRAM) is needed for use by several drivers.
This creates a genalloc pool and a hook for the platform code
to provide the struct gen_pool * in platform data.
Signed-off-by: Matt Porter mpor...@ti.com
I am not sure if any of the
101 - 200 of 2392 matches
Mail list logo
