Hi Linus,
some final polish for GPIO for v5.0.
Both patches are also tagged for stable.
Please pull them in!
Yours,
Linus Walleij
The following changes since commit 8834f5600cf3c8db365e18a3d5cac2c2780c81e5:
Linux 5.0-rc5 (2019-02-03 13:48:04 -0800)
are available in the Git repository at:
Hi Jiada,
On Wed, Feb 20, 2019 at 6:25 AM Jiada Wang wrote:
> According to user reference manual for R-CAR H3 and M3-W SoCs,
> in order to access busif4 ~ busif7, extended audio dmac registers
> (PDMASAREn, PDMADAREn, PDMACHCREn)
> need to be used, rather than basic audio dmac registers
>
On Wed, Feb 20, 2019 at 6:25 AM Jiada Wang wrote:
> Basic audio dmac register only supports busif from 0 to 3,
> in order to use busif4 ~ busif7, extended audio dmac register
> need to be used
>
> Signed-off-by: Jiada Wang
Reviewed-by: Geert Uytterhoeven
but please consider my comments to the
On Wed, Feb 20, 2019 at 6:25 AM Jiada Wang wrote:
> Basic audio dmac register only supports busif from 0 to 3,
> in order to use busif4 ~ busif7, extended audio dmac register
> need to be used.
>
> Signed-off-by: Jiada Wang
Reviewed-by: Geert Uytterhoeven
but please consider my comments to the
Am Samstag, 16. Februar 2019, 09:53:35 CET schrieb yuyufen:
> ping?
Sorry for the delay.
I didn't forget (completely) about this one.
The thing is, I don't really maintain jffs2 but I will collect and test patches
for the upcoming merge window and carry them via my ubifs tree.
David, I hope I
Hi Linus,
some final pin control fixes (I hope) to round off the v5.0 pin control
development cycle.
Only driver fixes, one for stable.
Please pull them in!
Yours,
Linus Walleij
The following changes since commit d13937116f1e82bf508a6325111b322c30c85eb9:
Linux 5.0-rc6 (2019-02-10 14:42:20
On Tue, 19 Feb 2019 14:03:30 -0500
Steven Rostedt wrote:
> > > Basically, a kprobe is mostly used for debugging what's happening in a
> > > live kernel, to read any address.
> >
> > My point is that "any address" is not sufficient to begin with. You
> > need "kernel or user".
> >
> > Having
Hi, Shawn,
> On Wed, Jan 23, 2019 at 01:21:35PM +0800, Alison Wang wrote:
> > This patch adds Audio DT nodes for LS1028ARDB and LS1028AQDS boards.
> >
> > Signed-off-by: Alison Wang
> > ---
> > arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 62
>
> >
The patch-series fixes issues in the LS3 configuration
and adds support for the LS2 regulator in the tps65218
Christian Hohnstaedt (3):
regulator: tps65218.c: fix LS3 issues
dt-bindings: regulator: Add LS2 load switch
regulator: tps65218: Add support for LS2
Am Dienstag, den 19.02.2019, 14:16 +0100 schrieb Jiri Kosina:
> On Mon, 11 Feb 2019, Gustavo A. R. Silva wrote:
>
> > In preparation to enabling -Wimplicit-fallthrough, mark switch
> > cases where we are expecting to fall through.
> >
> > This patch fixes the following warning:
> >
> >
Re-use the "tps65218_pmic_*_current_limit()" functions of LS3
and calculate the different required bit-shift by counting the
trailing 0s in "struct regulator_desc.csel_mask"
Signed-off-by: Christian Hohnstaedt
---
drivers/regulator/tps65218-regulator.c | 18 +-
1 file changed,
- Fix list of valid LS3 currents from mA to µA
- Fix selection of min/max microAmps of LS3.
Selecting one of the configured values as max value now really
selects it instead of the next lower one
Signed-off-by: Christian Hohnstaedt
---
drivers/regulator/tps65218-regulator.c | 5 +++--
1
and change units of LS3 example from microvolt to microamp
Signed-off-by: Christian Hohnstaedt
---
Documentation/devicetree/bindings/regulator/tps65218.txt | 9 +++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/regulator/tps65218.txt
On Tue, Feb 19, 2019 at 06:27:59PM -0800, Jakub Kicinski wrote:
> On Mon, 18 Feb 2019 19:21:49 +0100 (CET), Michal Kubecek wrote:
> > + else if (is_u32)
> > + bitmap_from_arr32(val, bitmap, nbits);
> > + else
> > + bitmap_copy(val, bitmap,
On 19-02-20 03:38, Aisheng Dong wrote:
> [...]
>
> > > I don't like droping some ID's (e.g. IMX_SC_R_DC_0_CAPTURE0) by mark
> > > them as unused or even worse give them a other meaning. IMHO the
> > > scu-api should be stable since day 1 and the ID's should only be extended.
> > > Marking ID's as
Am Dienstag, den 19.02.2019, 17:58 -0800 schrieb Andrey Smirnov:
> Enable PCIE0 interface connected to BCM4356 WiFi/Bluetooth module.
>
> Signed-off-by: Andrey Smirnov
> Cc: Shawn Guo
> Cc: Fabio Estevam
> Cc: Chris Healy
> Cc: Lucas Stach
> Cc: Leonard Crestez
> Cc: "A.s. Dong"
> Cc:
On Tue, Feb 19, 2019 at 04:54:49PM -0800, Kees Cook wrote:
> diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
> index cb28e98a0659..7e0ea4470f8e 100644
> --- a/arch/x86/kernel/cpu/common.c
> +++ b/arch/x86/kernel/cpu/common.c
> @@ -312,10 +312,16 @@ static __init int
Am Dienstag, den 19.02.2019, 18:14 -0800 schrieb Andrey Smirnov:
> Replace explicit polling loop with a call to
> regmap_read_poll_timeout() to avoid code repetition. Also fix
> misspelled "failed" while at it.
>
> Signed-off-by: Andrey Smirnov
> Cc: Lucas Stach
> Cc: Chris Healy
> Cc:
calc_tpm2_event_size() has an invalid signature because
it returns a 'size_t' where as its signature says that
it returns 'int'.
Cc:
Fixes: 4d23cc323cdb ("tpm: add securityfs support for TPM 2.0 firmware event
log")
Suggested-by: Jarkko Sakkinen
Signed-off-by: Yue Haibing
---
v3: fix My real
On 20/02/2019 03:58, Dan Williams wrote:
[...]
>>
>> Tricky code path, eh?
>
> ioctl path, number one source of bugs / thrash in this subsystem. 2nd
> place, ARS.
Possibly unpopular idea, but should we maybe teach trinity/syzcaller
about these ioctl()s?
Better we find the bugs in a QA like
On Mon, Feb 18, 2019 at 09:48:20AM +0800, Dave Young wrote:
> It is ideal if kernel can do it automatically, but I'm not sure if
> kernel can predict the swiotlb reserved size automatically.
Do you see how even more absurd this gets?
If the kernel cannot know the swiotlb reserved size
On Mon, Feb 18, 2019 at 07:15:44PM +0100, Michal Hocko wrote:
> From: Michal Hocko
> Fixes: efad4e475c31 ("mm, memory_hotplug: is_mem_section_removable do not
> pass the end of a zone")
> Reported-by:
> Signed-off-by: Michal Hocko
Looks good to me.
I glanced quickly over the memhotplug code
Hi, Jitao:
On Tue, 2019-02-19 at 17:14 +0800, Jitao Shi wrote:
> This patch add mt8183 mipi_tx driver.
> And also support other chips that use the same binding and driver.
>
> Signed-off-by: Jitao Shi
> ---
> drivers/gpu/drm/mediatek/mtk_mipi_tx.c| 2 +
>
bitmap_parselist has been evolved from a pretty simple idea for long and
now lacks for refactoring. It is not structured, has nested loops and a
set of opaque-named variables. All this leads to extremely hard
understanding of the code. Once during the optimization of it I missed a
scenario which
Propagate existing bitmap_parselist() tests to bitmap_parselist_user().
Signed-off-by: Yury Norov
---
lib/test_bitmap.c | 46 --
1 file changed, 36 insertions(+), 10 deletions(-)
diff --git a/lib/test_bitmap.c b/lib/test_bitmap.c
index
Move region checking and setting functionality of __bitmap_parselist()
to helpers.
Signed-off-by: Yury Norov
---
lib/bitmap.c | 64 +++-
1 file changed, 53 insertions(+), 11 deletions(-)
diff --git a/lib/bitmap.c b/lib/bitmap.c
index
The requirement for this rework is to keep the __bitmap_parselist()
copy-less and single-pass but make it more readable and maintainable by
splitting into logical parts and removing explicit nested cycles and
opaque local variables.
__bitmap_parselist() can parse userspace inputs and therefore we
test_bitmap_parselist currently uses get_cycles which is not
implemented on some platforms, so use ktime_get() instead.
Signed-off-by: Yury Norov
---
lib/test_bitmap.c | 9 -
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/lib/test_bitmap.c b/lib/test_bitmap.c
index
Add tests for non-number character, empty regions, integer overflow.
Signed-off-by: Yury Norov
---
lib/test_bitmap.c | 18 +-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/lib/test_bitmap.c b/lib/test_bitmap.c
index b06e0fd3811b..709424a788ee 100644
---
bitmap_parselist() calculates length of the input string before passing
it to the __bitmap_parselist(). But the end-of-line condition is checked
for every character in __bitmap_parselist() anyway. So doing it in wrapper
is a simple waste of time.
Signed-off-by: Yury Norov
---
lib/bitmap.c | 5
On 20/2/2019 9:22 AM, Eduardo Valentin wrote:
> On Fri, Dec 28, 2018 at 11:28:42AM +0800, Wei Ni wrote:
>>
>>
>> On 28/12/2018 7:06 AM, Rob Herring wrote:
>>> On Tue, Dec 18, 2018 at 03:34:33PM +0800, Wei Ni wrote:
Add optional property "nvidia,thermtrips".
If present, these trips
On Wed, 20 Feb 2019, Stefan Achatz wrote:
> I already confirmed this 7 months ago but as I see only in a reply to
> you.
I guess that fell in between cracks somewhere.
> Yes, this patch is correct.
Applied, thanks.
--
Jiri Kosina
SUSE Labs
On 20/2/2019 10:14 AM, Zhang Rui wrote:
> On 一, 2019-02-18 at 15:59 +0800, Wei Ni wrote:
>> Rui,
>> Will you take this serial?
>>
> it is already in my tree.
> I missed -rc6, thus I will queue them for 5.1-rc1.
Thanks.
I updated v8 patch per Daniel Lezcano's comment.
Please check it.
Wei.
>
Wed, Feb 20, 2019 at 07:48:13AM CET, da...@davemloft.net wrote:
>From: Vinod Koul
>Date: Wed, 20 Feb 2019 10:10:55 +0530
>
>> On 20-02-19, 09:31, Stephen Rothwell wrote:
>>> Hi all,
>>>
>>> In commit
>>>
>>> a968b5e9d587 ("net: dsa: qca8k: Enable delay for RGMII_ID mode")
>>>
>>> Fixes tag
On Wed, 20 Feb 2019 at 12:25, Greg KH wrote:
>
> On Wed, Feb 20, 2019 at 10:29:46AM +0530, Vaishali Thakkar wrote:
> > From: Vinod Koul
> >
> > Qcom Socinfo driver can be built as a module, so
> > export these two APIs.
> >
> > Signed-off-by: Vinod Koul
> > Signed-off-by: Vaishali Thakkar
> >
On Thu, Feb 07, 2019 at 09:27:51AM +0100, Thierry Reding wrote:
> On Wed, Feb 06, 2019 at 07:12:04PM +0100, Philipp Zabel wrote:
> > On Wed, 2019-02-06 at 17:00 +0100, Thierry Reding wrote:
> [...]
> > > That way we operate on the same reset control, but we wouldn't need to
> > > iterate over all
This patch adds Audio DT nodes for LS1028ARDB and LS1028AQDS boards.
Signed-off-by: Alison Wang
---
Changes in v2:
- Modify some nodes' names.
- Use GIC_SPI and IRQ_TYPE_LEVEL_HIGH.
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 62
Best Regards!
Anson Huang
> -Original Message-
> From: Aisheng Dong
> Sent: 2019年2月20日 15:45
> To: Anson Huang ; mark.rutl...@arm.com;
> shawn...@kernel.org; s.ha...@pengutronix.de; ker...@pengutronix.de;
> feste...@gmail.com; catalin.mari...@arm.com; will.dea...@arm.com;
>
On Wed, Feb 20, 2019 at 04:25:38PM +0800, Yue Haibing wrote:
> calc_tpm2_event_size() has an invalid signature because
> it returns a 'size_t' where as its signature says that
> it returns 'int'.
>
> Cc:
> Fixes: 4d23cc323cdb ("tpm: add securityfs support for TPM 2.0 firmware event
> log")
>
On Fri, Jan 18, 2019 at 07:48:59AM -0800, tip-bot for Jiaxun Yang wrote:
> Commit-ID: 0237199186e7a4aa5310741f0a6498a20c820fd7
> Gitweb:
> https://git.kernel.org/tip/0237199186e7a4aa5310741f0a6498a20c820fd7
> Author: Jiaxun Yang
> AuthorDate: Tue, 20 Nov 2018 11:00:18 +0800
> Committer:
On Sat, Feb 09, 2019 at 12:34:20PM -0800, Laura Abbott wrote:
> On 2/5/19 12:43 PM, Heiko Carstens wrote:
> >On Tue, Jan 29, 2019 at 08:25:58AM +0100, Laura Abbott wrote:
> >>On 1/23/19 5:24 AM, Heiko Carstens wrote:
> >>>On Wed, Jan 23, 2019 at 01:55:13PM +0100, Laura Abbott wrote:
> There's
On Sun, Feb 17, 2019 at 2:21 AM Mans Rullgard wrote:
>
> This adds pinctrl settings for various missing uart options.
>
> Signed-off-by: Mans Rullgard
> ---
> arch/arm/boot/dts/sun7i-a20.dtsi | 45
> 1 file changed, 45 insertions(+)
>
> diff --git
On Tue, Feb 19, 2019 at 05:48:36PM -0800, Olof Johansson wrote:
> Getting notified of unknown NMIs is obviously important, but getting
> notified on every single one, especially on larger systems with slow
> (serial) console causes more harm than good when it's a known noisy
> non-relevant event.
wt., 19 lut 2019 o 21:55 Shravan Kumar Ramani napisał(a):
>
> This patch adds support for the GPIO controller used by Mellanox
> BlueField SOCs.
>
Thanks for addressing the issues. A couple more things I missed the
last time are below.
> Reviewed-by: David Woods
> Signed-off-by: Shravan Kumar
On Tue 2019-02-12 15:29:48, John Ogness wrote:
> vprintk_emit and vprintk_store are the main functions that all printk
> variants eventually go through. Change these to store the message in
> the new printk ring buffer that the printk kthread is reading.
We need to switch the two buffers in a
Lx2160a is a new introduced soc which supports ATA3.0
Signed-off-by: Peng Ma
---
changed for V6:
- Add ecc_initialized to ensure set sata bit once of
ECC error register
- Recovery AHCI_LS2088A platform
drivers/ata/ahci_qoriq.c | 52
Add lx2160a compatible to bindings documentation.
Signed-off-by: Peng Ma
---
changed for V6:
- no changed
.../devicetree/bindings/ata/ahci-fsl-qoriq.txt |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git
Add SATA device nodes for fsl-lx2160a and enable support
for QDS and RDB boards.
Signed-off-by: Peng Ma
---
changed for V6:
- no change
arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts | 16 +++
arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 16 +++
On Tue, Feb 19, 2019 at 09:39:11AM -0800, Guenter Roeck wrote:
> On 2/18/19 5:42 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.20.11 release.
> > There are 92 patches in this series, all will be posted as a response
> > to this one. If anyone has any
On Tue, 19 Feb 2019 17:27:05 -0500
Tony Krowiak wrote:
> On 2/18/19 11:57 AM, Cornelia Huck wrote:
> > On Mon, 18 Feb 2019 11:35:45 -0500
> > Tony Krowiak wrote:
> >
> >> On 2/18/19 7:01 AM, Cornelia Huck wrote:
> >>> On Fri, 15 Feb 2019 16:59:33 -0500
> >>> Tony Krowiak wrote:
> >>>
On Wed, Feb 20, 2019 at 04:58:49PM +0800, Chen-Yu Tsai wrote:
> On Sun, Feb 17, 2019 at 2:21 AM Mans Rullgard wrote:
> >
> > This adds pinctrl settings for various missing uart options.
> >
> > Signed-off-by: Mans Rullgard
> > ---
> > arch/arm/boot/dts/sun7i-a20.dtsi | 45
Hi Marc
On 19 February 2019 20:29 Marc Zyngier wrote:
> On Tue, 19 Feb 2019 15:55:11 + Phil Edworthy wrote:
>
> + LinusW, who seem to have taken an interest in irqchip hierarchies...
>
> > On RZ/N1 devices, there are 3 Synopsys DesignWare GPIO blocks each
> > configured to have 32 interrupt
On Wed, Feb 20, 2019 at 4:13 AM Baolin Wang wrote:
> On Tue, 19 Feb 2019 at 20:20, Vinod Koul wrote:
> > On 19-02-19, 17:49, Baolin Wang wrote:
> > > On Tue, 19 Feb 2019 at 17:30, Geert Uytterhoeven
> > > wrote:
> > > > On Tue, Feb 19, 2019 at 4:15 AM Baolin Wang
> > > > wrote:
> > > > > On
Hi Yousaf,
To set sata bit of ecc-addr will affect all sata controllers, The v6 patch has
been sent will fixed the remap error when two or more sata controllers be
probed, please review.
Thanks.
Best Regards,
Peng
>-Original Message-
>From: Peng Ma
>Sent: 2019年2月14日 17:19
>To: 'Mian
On 2019/2/20 14:10, Dan Carpenter wrote:
> On Wed, Feb 20, 2019 at 08:58:43AM +0300, Dan Carpenter wrote:
>> On Wed, Feb 20, 2019 at 03:08:40AM +, YueHaibing wrote:
>>> btrfs_item_size_nr return value is u32, convert it to int may result
>>> in truncation.Also read_extent_buffer expect a
There is a compiler failure on arm64 platform, as follow:
AS arch/arm64/kvm/hyp.o
CC kernel/trace/ring_buffer.o
In file included from security/integrity/ima/ima_fs.c:30:0:
security/integrity/ima/ima.h:176:7: error: redeclaration of enumerator ‘NONE’
hook(NONE) \
^
On 20/02/19 9:23 AM, Vaishali Thakkar wrote:
On Wed, Feb 20, 2019 at 8:54 AM Himadri Pandya wrote:
Hi Himadri,
Thanks for the patch!
For the scope of Outreachy, we prefer that you send patches in staging
directory as Greg makes sure to pick them during the application
period. Of course,
On Tue, 19 Feb 2019 17:48:29 +0100
Thomas Bogendoerfer wrote:
> On Tue, 19 Feb 2019 16:27:16 +
> Marc Zyngier wrote:
>
> > On Tue, 19 Feb 2019 16:57:23 +0100
> > Thomas Bogendoerfer wrote:
> >
> > Hi Thomas,
> >
> > > When creating hierarchy domains use irq_default_domain as parent,
On Tue, 2019-02-19 at 15:33 -0800, Evan Green wrote:
> On Sun, Feb 17, 2019 at 1:09 AM Yong Wu wrote:
> >
> > In the 4GB mode, the physical address is remapped,
> >
> > Here is the detailed remap relationship.
> > CPU PA ->HW PA
> > 0x4000_ 0x1_4000_ (Add bit32)
> >
On Wed, Feb 20, 2019 at 6:55 AM Eduardo Valentin wrote:
>
> On Mon, Feb 18, 2019 at 06:05:18PM +0530, Amit Kucheria wrote:
> > msm8996 has a total of 21 temperature sensors. Populate DT with
> > information about them.
> >
> > There are 2 sensors on each of the cpus - one on the top, the other
>
On Wed, Feb 20, 2019 at 7:44 AM Dmitry Vyukov wrote:
>
> On Wed, Feb 20, 2019 at 1:34 AM Kostya Serebryany wrote:
> >
> > On Tue, Feb 19, 2019 at 2:43 PM Nick Desaulniers
> > wrote:
> > >
> > > + Evgenii, Kostya for KASAN
> > >
> > > On Tue, Feb 19, 2019 at 2:17 PM Qian Cai wrote:
> > > >
> >
On Wed, Feb 20, 2019 at 6:47 AM Eduardo Valentin wrote:
>
> On Thu, Feb 07, 2019 at 04:19:31PM +0530, Amit Kucheria wrote:
> > On some TSENS IP, version is stored. Print that version at init.
> >
> > Signed-off-by: Amit Kucheria
> > ---
> > drivers/thermal/qcom/tsens-common.c | 23
On Sun, Feb 17, 2019 at 06:59:01PM +0100, Karoly Pados wrote:
> Current GPIO code in cp210x fails to take USB autosuspend into account,
> making it practically impossible to use GPIOs with autosuspend enabled
> without user configuration. Fix this like for ftdi_sio in a previous patch.
> Tested on
On Tue, 19 Feb 2019 10:47:38 -0800
Guenter Roeck wrote:
> Hi Cornelia,
>
> On 2/18/19 2:30 PM, Cornelia Huck wrote:
>
> >> What is your qemu command line ?
> >
> > Ignoring any additional devices:
> >
> > s390x-softmmu/qemu-system-s390x -M s390-ccw-virtio,accel=tcg -cpu max -m
> > 1024
On Tue 2019-02-19 13:06:17, Andy Shevchenko wrote:
> On Tue, Feb 19, 2019 at 5:07 AM Sergey Senozhatsky
> wrote:
>
> > Suppose, in my driver I want to sprintf() IPv4 address. The longest
> > possible address is 3 * 4 (%d%d%d) + 3 bytes (dots) + terminating NULL.
> > E.g. 111.111.111.111
> >
> >
On Tue, Feb 19, 2019 at 06:01:17PM -0800, Paul E. McKenney wrote:
> On Tue, Feb 19, 2019 at 11:57:37PM +0100, Andrea Parri wrote:
> > Remove this subtle (and, AFAICT, unused) ordering: we can add it back,
> > if necessary, but let us not encourage people to rely on this thing.
> >
> > For
On Tue, 19 Feb 2019 22:31:17 +0100
Pierre Morel wrote:
> On 19/02/2019 19:52, Tony Krowiak wrote:
> > On 2/18/19 1:08 PM, Pierre Morel wrote:
> >> Libudev relies on having a subsystem link for non-root devices. To
> >> avoid libudev (and potentially other userspace tools) choking on the
> >>
From: Colin Ian King
There is an uppercase 'N' that should be a lowercase 'n', fix this.
Signed-off-by: Colin Ian King
---
drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
On Wed, Feb 20, 2019 at 8:44 AM Sugaya Taichi
wrote:
> diff --git a/arch/arm/configs/milbeaut_m10v_defconfig
> b/arch/arm/configs/milbeaut_m10v_defconfig
> new file mode 100644
> index 000..a263211
> --- /dev/null
> +++ b/arch/arm/configs/milbeaut_m10v_defconfig
> @@ -0,0 +1,175 @@
I no
On Mon, Feb 18, 2019 at 10:32:57AM +, Nix wrote:
> On 18 Feb 2019, Johan Hovold stated:
>
> > On Sun, Feb 17, 2019 at 07:13:52PM +, Nix wrote:
> >> I'm still fairly sure this is a regression -- my machines are often up
> >> for a lot longer than that and I've never seen this before I
On 8 February 2019 18:18, Mark Brown wrote:
> On Fri, Feb 15, 2019 at 07:06:15AM +, Agrawal, Akshu wrote:
>
> > +static static int cz_da7219_hw_params(struct snd_pcm_substream
> *substream,
> > + struct snd_pcm_hw_params *params) {
> > + /* da7219 Codec is
Nicolas Saenz Julienne writes:
> Immediate data transfers (IDT) allow the HCD to copy small chunks of
> data (up to 8bytes) directly into its output transfer TRBs. This avoids
> the somewhat expensive DMA mappings that are performed by default on
> most URBs submissions.
>
> In the case an URB
On Thursday, February 14, 2019 7:29:10 PM CET Sudeep Holla wrote:
> All device objects in the driver model contain fields that control the
> handling of various power management activities. However, it's not
> always useful. There are few instances where pseudo devices are added
> to the model
Hello,
syzbot found the following crash on:
HEAD commit:abf446c90405 Add linux-next specific files for 20190220
git tree: linux-next
console output: https://syzkaller.appspot.com/x/log.txt?x=17f250d8c0
kernel config: https://syzkaller.appspot.com/x/.config?x=463cb576ac40e350
On Tuesday, February 19, 2019 2:50:04 PM CET Borislav Petkov wrote:
> On Tue, Feb 19, 2019 at 11:00:49AM +0100, Rafael J. Wysocki wrote:
> > Boris, any comments here?
>
> For both:
>
> Acked-by: Borislav Petkov
Both applied, thanks!
On Thu, Feb 14, 2019 at 10:56 AM Enrico Weigelt, metux IT consult
wrote:
> On 08.02.19 15:25, Linus Walleij wrote:
>
> >> +config GPIO_AMD_FCH
> >> + tristate "GPIO support for AMD Fusion Controller Hub (G-series
> >> SOCs)"
> >> + select GPIO_GENERIC
> >
> > You are selecting
On Tue, 19 Feb 2019 11:05:38 +,
Shameerali Kolothum Thodi wrote:
>
> Hi Marc,
>
> A gentle reminder on this one...
Thanks for that. Now applied to irqchip-next.
M.
--
Jazz is not dead, it just smell funny.
On Tue, 2019-02-19 at 11:05 -0800, Nick Desaulniers wrote:
> On Tue, Feb 19, 2019 at 10:21 AM Nathan Chancellor
> wrote:
> > Clang warns:
> >
> > drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c:465:2:
> > warning:
> > comparison of distinct pointer types ('typeof ((rtt_avg)) *' (aka
> >
On Wed, Feb 20, 2019 at 6:56 AM Eduardo Valentin wrote:
>
> Hey
> On Mon, Feb 18, 2019 at 06:05:14PM +0530, Amit Kucheria wrote:
> > - Expose all temperature sensors on msm8916, msm996, msm8998, sdm845
> > - split up the register address map for msm8998
> > - standardize names of the various
On Wed, Feb 20, 2019 at 6:39 AM Eduardo Valentin wrote:
>
> On Thu, Feb 07, 2019 at 04:19:41PM +0530, Amit Kucheria wrote:
> > qcs404 has 10 sensors connected to the single TSENS IP. Define a thermal
> > zone for each of those sensors to expose the temperature of each zone.
> >
> > Signed-off-by:
On 02/20/19 at 09:32am, Borislav Petkov wrote:
> On Mon, Feb 18, 2019 at 09:48:20AM +0800, Dave Young wrote:
> > It is ideal if kernel can do it automatically, but I'm not sure if
> > kernel can predict the swiotlb reserved size automatically.
>
> Do you see how even more absurd this gets?
>
>
On Mon, 18 Feb 2019 14:22:31 -0300
Lucas Oshiro wrote:
> Hi,
>
> We solved some checkpath.el CHECKs and WARNINGs. We also inverted the arms of
> an if statement, in order to make the code smaller as the else statement was
> supressed. We added a missing '\n' on a dev_err message.
Please try to
On Thu, Feb 14, 2019 at 5:54 PM Alexandre Torgue
wrote:
> Please find 2 updates for STM32 pinctrl driver:
>
> -Fix a memory leak issue present since the beginning of the driver.
> -Handle error case when a hwspinlock can't get locked.
Patches applied for v5.1.
Yours,
Linus Walleij
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing in e-mail?
On Tue, Feb 19, 2019 at 02:07:01PM -0800, Greg Kerr wrote:
> Thanks for posting this patchset Peter. Based on the patch
On Thu, Feb 14, 2019 at 11:05 PM Enrico Weigelt, metux IT consult
wrote:
> GPIO platform driver for the AMD G-series PCH (eg. on GX-412TC)
>
> This driver doesn't registers itself automatically, as it needs to
> be provided with platform specific configuration, provided by some
> board driver
On Thu, Feb 14, 2019 at 08:44:48PM +, Elliott, Robert (Persistent Memory)
wrote:
>
>
> > -Original Message-
> > From: Linux-nvme [mailto:linux-nvme-boun...@lists.infradead.org] On Behalf
> > Of Keith Busch
> > Sent: Tuesday, February 5, 2019 8:39 AM
> > To: Takao Indoh
> > Cc:
On Wed 20-02-19 08:31:05, Meelis Roos wrote:
> > Could
> > https://lore.kernel.org/linux-mm/20190219123212.29838-1-lar...@axis.com/T/#u
> > be relevant?
>
> Tried it, still broken.
OK, I didn't put too much hope into this patch as you see filesystem
metadata corruption so icache/dcache coherency
Andrea Parri writes:
> On Mon, Feb 11, 2019 at 03:38:59PM +0100, Petr Mladek wrote:
>> On Mon 2019-02-11 13:50:35, Andrea Parri wrote:
>> > On Thu, Feb 07, 2019 at 11:46:29PM +1100, Michael Ellerman wrote:
>> > > Arch code can set a "dump stack arch description string" which is
>> > > displayed
On Mon, 18 Feb 2019 13:01:23 -0800
Joe Perches wrote:
> On Mon, 2019-02-18 at 14:22 -0300, Lucas Oshiro wrote:
> > Add missing '\n' at the end of dev_err message on line 215.
> []
> > diff --git a/drivers/iio/potentiostat/lmp91000.c
> > b/drivers/iio/potentiostat/lmp91000.c
> []
> > @@
On 2019.02.19 02:46:32 -0500, Yan Zhao wrote:
> The patch implments the gvt interface intel_gvt_save_restore to
> save/restore vGPU's device config data for live migration.
>
> vGPU device config data includes vreg, vggtt, vcfg space, workloads, ppgtt,
> execlist.
> It does not include dirty
> From: Marco Felsch [mailto:m.fel...@pengutronix.de]
> Sent: Wednesday, February 20, 2019 4:17 PM
> On 19-02-20 03:38, Aisheng Dong wrote:
> > [...]
> >
> > > > I don't like droping some ID's (e.g. IMX_SC_R_DC_0_CAPTURE0) by
> > > > mark them as unused or even worse give them a other meaning.
On Tue 19-02-19 08:17:09, Steve Magnani wrote:
> On 2/19/19 8:02 AM, Jan Kara wrote:
> > On Tue 19-02-19 11:44:03, Colin King wrote:
> > > From: Colin Ian King
> > >
> > > There is a null check on the pointer bh to avoid a null pointer
> > > dereference
> > > on bh->b_data however later bh is
On Mon, Feb 18, 2019 at 12:10 PM Måns Rullgård wrote:
>
> "Rafael J. Wysocki" writes:
>
> > On Sat, Feb 16, 2019 at 5:50 PM Mans Rullgard wrote:
> >>
> >> If the provided fwnode is an OF node, set dev.of_node as well.
> >>
> >> Signed-off-by: Mans Rullgard
> >> ---
> >>
On Fri, Feb 15, 2019 at 2:00 AM Suman Anna wrote:
> Mark, Linus,
>
> So, I hope it is clear from Roger's responses that above assertions do
> not hold true to this INTC, and so want to confirm that we are good with
> the current non-hierarchical design.
IIUC the 64 lines are latched onto 8
On Mon, 18 Feb 2019 14:22:35 -0300
Lucas Oshiro wrote:
> Invert if statement arms in line 214, in order to make the code cleaner
>
> Signed-off-by: Lucas Oshiro
> Signed-off-by: Anderson Reis
Given this undoes one of the earlier changes, please merge them.
Jonathan
> ---
>
On Fri, Feb 15, 2019 at 9:01 AM WangBo wrote:
> The of_find_device_by_node takes a reference to the struct device
> when find the match device ,we should release it when fail.
>
> Signed-off-by: WangBo
Patch applied!
Yours,
Linus Walleij
On Wed, Feb 20, 2019 at 05:11:15PM +0800, Zhangshaokun wrote:
> There is a compiler failure on arm64 platform, as follow:
>
> AS arch/arm64/kvm/hyp.o
> CC kernel/trace/ring_buffer.o
> In file included from security/integrity/ima/ima_fs.c:30:0:
> security/integrity/ima/ima.h:176:7:
diff --git a/Makefile b/Makefile
index b82f7c3383ec..8cec2faf5d40 100644
--- a/Makefile
+++ b/Makefile
@@ -1,6 +1,6 @@
VERSION = 3
PATCHLEVEL = 18
-SUBLEVEL = 134
+SUBLEVEL = 135
EXTRAVERSION =
NAME = Diseased Newt
diff --git a/arch/alpha/include/asm/irq.h b/arch/alpha/include/asm/irq.h
I'm announcing the release of the 3.18.135 kernel.
All users of the 3.18 kernel series must upgrade.
The updated 3.18.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git
linux-3.18.y
and can be browsed at the normal kernel.org git web
diff --git a/Documentation/networking/ip-sysctl.txt
b/Documentation/networking/ip-sysctl.txt
index 7c229f59016f..2fb35658d151 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -116,7 +116,7 @@ ipfrag_high_thresh - LONG INTEGER
Maximum
1 - 100 of 1140 matches
Mail list logo
