Antti Palosaari wrote:
> I need your signed off by tag in order to forward this mainline.
> Patch is correct and I tested it also.
OK, here it is again with the requested line. And thanks for taking care
of the issue.
Signed-off-by: Nils Kassube
---
--- orig/linux-2.6.31/drivers/media/dvb/dvb-us
[snip]
> >> >
> >>
> >> H Hermann
> >>
> >> thanks for your suggestion .
> >> No improvement with changing the quirk to 0xfd ,
> >> I still get the same error messages :
> >> i2c-adapter i2c-1: Invalid 7-bit address 0x7a
> >> saa7133[0]: i2c xfer: < 8e >
> >> input: i2c IR (Pinnacle PCTV) as
Heips Nils,
On 07/07/2009 05:33 PM, Nils Kassube wrote:
Hi Antti,
Antti Palosaari wrote:
Nils Kassube wrote:
As I'm not familiar with the hardware, I can't say what buffer size
would be appropriate but I can say that for my device the parameter
I see the problem but your fix is not ideally c
Hei Devin and Jelle,
On 07/11/2009 12:12 AM, Antti Palosaari wrote:
I'm not the maintainer for this demod, so I'm not the best person to
make such a fix. I spent four hours and debugged the issue as a favor
to Jelle de Jong since he loaned me some hardware a couple of months
ago. I guess I can m
On Fri, Jul 03, 2009 at 06:48:49PM +0200, Oliver Neukum wrote:
> The irq handler will touch memory. Even in the error case some URBs may
> complete. Thus no memory must be kfreed before all URBs are killed.
>
> Signed-off-by: Oliver Neukum
Acked-by: Greg Kroah-Hartman
thanks,
greg k-h
--
To u
Em Fri, 10 Jul 2009 16:35:09 -0500
"Karicheri, Muralidharan" escreveu:
> Mauro,
>
> I have forwarded the two patches to Russell as asked in your email. Let me if
> it doesn't look right.
OK. The emails you sent him is the proper way ;)
Cheers,
Mauro
--
To unsubscribe from this list: send th
Em Fri, 10 Jul 2009 16:13:05 -0500
"Karicheri, Muralidharan" escreveu:
> Mauro,
>
> Please excuse me to ask these silly questions. Since I am not much familiar
> with the process, I need some help here.
>
> The arm patches are attached in Hans original pull request. Is it Okay to 1)
> forward
Mauro,
I have forwarded the two patches to Russell as asked in your email. Let me if
it doesn't look right.
Thanks.
Murali Karicheri
Software Design Engineer
Texas Instruments Inc.
Germantown, MD 20874
Phone : 301-515-3736
email: m-kariche...@ti.com
>-Original Message-
>From: Mauro Car
Hello Russell,
This patch is part of the vpfe capture driver (V4L) that adds platform code for
the driver on DM355 which is an ARM based SoC. I have attached the original
pull request to this email. Please review this and Let us know your comments.
Thanks.
Murali Karicheri
Software Design Engi
Hello Russell,
This patch is part of the vpfe capture driver (V4L) that adds platform code for
the driver on DM6446 which is an ARM based SoC. I have attached the original
pull request to this email. Please review this and Let us know your comments.
Thanks.
Murali Karicheri
m-kariche...@ti.com
Mauro,
Please excuse me to ask these silly questions. Since I am not much familiar
with the process, I need some help here.
The arm patches are attached in Hans original pull request. Is it Okay to 1)
forward the same to Russel, cc you and request his comment or 2) forward the
original patches
On 07/10/2009 06:16 PM, Devin Heitmueller wrote:
On Fri, Jul 10, 2009 at 8:09 AM, Antti Palosaari wrote:
af9013 is correct in my mind. af9013 will return -EINVAL (error invalid
value) in case of first garbage value met (maybe better to switch auto mode
when garbage value meet and print debug lo
On 07/10/2009 09:52 PM, Nick Burch wrote:
usb 2-4: new high speed USB device using ehci_hcd and address 4
usb 2-4: configuration #1 chosen from 1 choice
dvb-usb: found a 'KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)' in cold
state, will try to load a firmware
usb 2-4: firmware: requesting dvb-us
Em Fri, 10 Jul 2009 15:54:21 -0500
"Karicheri, Muralidharan" escreveu:
> Oops!
>
> I thought you are going to merge the pull request from Hans
> and send them for comments like you did for DM6467 patches.
In the case of dm6467, I only noticed the lack of Russell ack after merging it
at -hg. Due
Oops!
I thought you are going to merge the pull request from Hans
and send them for comments like you did for DM6467 patches.
Please confirm.
Murali Karicheri
Software Design Engineer
Texas Instruments Inc.
Germantown, MD 20874
Phone : 301-515-3736
email: m-kariche...@ti.com
>-Original Mes
Mauro,
Thanks for your support. I will wait for the comments.
Murali Karicheri
Software Design Engineer
Texas Instruments Inc.
Germantown, MD 20874
Phone : 301-515-3736
email: m-kariche...@ti.com
>-Original Message-
>From: Mauro Carvalho Chehab [mailto:mche...@infradead.org]
>Sent: Frida
Em Thu, 9 Jul 2009 09:18:47 -0500
"Karicheri, Muralidharan" escreveu:
> Mauro,
>
> Could you please let me know what your plans are for this pull request?
Murali,
The arm Maintainer should ack on the patches that touch arch/arm. After having
it, I'll analyze the patches again and, if not too l
Em Mon, 6 Jul 2009 20:24:44 +0200
Hans Verkuil escreveu:
> Hi Mauro,
>
> Please pull from http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-vpfe-cap for the
> following:
>
> - tvp514x: Migration to sub-device framework
> - tvp514x: formatting comments as per kernel documentation
> - v4l: vpfe captur
Hi All
I'm trying to get the KWorld 395U DVB-T usb tuner working, and failing at
the last hurdle. I think it might be an issue with the tuner chip, but
here's what I found:
Firstly, driver wise, I tried a stock ubuntu 9.04 2.6.28 kernel and the
af9015 driver. This driver loaded, but didn't r
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Fri Jul 10 19:00:03 CEST 2009
path:http://www.linuxtv.org/hg/v4l-dvb
changeset: 12211:c300798213a9
gcc version: gcc
On Fri, Jul 10, 2009 at 11:40 AM, Jelle de
Jong wrote:
> Antti if you can fix this issue and help in the future to make some
> signal strength API for application, like w_scan, you can keep the
> Realtek based dvb-t device I sent to you as a gift, some credits for me
> in patches would also be nice
On Fri, Jul 10, 2009 at 11:40 AM, Jelle de
Jong wrote:
> Antti if you can fix this issue and help in the future to make some
> signal strength API for application, like w_scan, you can keep the
> Realtek based dvb-t device I sent to you as a gift, some credits for me
> in patches would also be nice
Hi,
With the huge help of Hermann, I managed to implement this remote with
it's new card Compro VideoMate Vista T750F card=169 (just a copy of T750
with a diff keymap). I successfully compiled v4l and managed to get this
remote to work.
I need some help on mapping specific MCE buttons, si
Hallo Raimund,
i think the problem is related to
http://www.linuxtv.org/pipermail/linux-dvb/2008-December/030738.html
but this new situation with
http://www.tridentmicro.com/Product_drx_39xyK.asp
can maby change something about this chip
thx
Mario
--
To unsubscribe from this list: send the li
Devin Heitmueller wrote:
> On Fri, Jul 10, 2009 at 8:09 AM, Antti Palosaari wrote:
>> af9013 is correct in my mind. af9013 will return -EINVAL (error invalid
>> value) in case of first garbage value met (maybe better to switch auto mode
>> when garbage value meet and print debug log?).
>>
>> Of cou
On Fri, Jul 10, 2009 at 8:09 AM, Antti Palosaari wrote:
> af9013 is correct in my mind. af9013 will return -EINVAL (error invalid
> value) in case of first garbage value met (maybe better to switch auto mode
> when garbage value meet and print debug log?).
>
> Of course there should be at least deb
hei Devin,
Thank you for debugging this issue.
Devin Heitmueller wrote:
Thanks to Jelle providing an environment to debug the issue in, I
isolated the problem. This is actually a combination of bugs in
mplayer and the af9013 driver not handling the condition as gracefully
as some other demods.
Claes Lindblom wrote:
> It sounds like a possible card to try. I was also starting to look at
> the TeVii S470 PCIe card but it's the same here at the linuxtv wiki
> that there are no comments, only that it is supported.
> At http://www.tevii.com/product_s470.html you can read that they have
> Linu
Devin Heitmueller wrote:
> On Fri, Jul 3, 2009 at 12:01 PM, Jelle de Jong
> wrote:
>> Antti Palosaari wrote:
>>> On 06/26/2009 11:07 AM, Jelle de Jong wrote:
Hi all,
Because i now use a new kernel and new mplayer versions I did some
testing again on one of my long standing issu
>Am Montag, den 06.07.2009, 21:31 -0400 schrieb Manu:
>> Le 06/07/2009 15:12:00, Claes Lindblom a écrit :
>> > jens.peder.terje...@devoteam.com wrote:
>> > >
>> > > -sacha wrote: -
>> > >
>> > > >To: cla...@gmail.com
>> > > >From: sacha
>> > > >Sent by: linux-dvb-boun...@linuxtv.org
>> > >
30 matches
Mail list logo