This driver exports a video device node per each CCIC
(CMOS Camera Interface Controller)
device contained in Marvell Mobile PXA910 SoC
The driver is based on v4l2-mem2mem framework, and only
USERPTR is supported.
Signed-off-by: Kassey Lee y...@marvell.com
---
hi, Guennadi:
thanks for your comments.
I converted it to videobuf2 and send it out in another thread.
[PATCH] V4L/DVB: v4l: Add driver for Marvell PXA910 CCIC
would you please review ? thanks
2011/5/18 Guennadi Liakhovetski g.liakhovet...@gmx.de:
Hi Kassey
On
Introduce omap_vout_vrfb.c and omap_vout_vrfb.h, for all VRFB related API's,
making OMAP_VOUT driver independent from VRFB. This is required for OMAP4 DSS,
since OMAP4 doesn't have VRFB block.
A new enum called vout_rotation_type is introduced to differentiate between no
rotation and vrfb
Move some inline functions from omap_vout.c to omap_voutdef.h and independent
functions like omap_vout_alloc_buffer/omap_vout_free_buffer to omap_voutlib.c.
Signed-off-by: Archit Taneja arc...@ti.com
---
drivers/media/video/omap/omap_vout.c| 109 ---
Introduce omap_vout_vrfb.c and omap_vout_vrfb.h, for all VRFB related API's,
making OMAP_VOUT driver independent from VRFB. This is required for OMAP4 DSS,
since OMAP4 doesn't have VRFB block.
Added new enum vout_rotation_type and rotation_type member to omapvideo_info,
this is initialized based
On Thursday 26 May 2011, Sakari Ailus wrote:
I strongly favour GStreamer below OpenMAX rather than V4L2. Naturally the
GStreamer source plugins do use V4L2 where applicable.
Interesting point, yes. Note that this is probably the opposite of
what David had in mind when talking about GStreamer
On 25 May 2011 11:43, Laurent Pinchart
laurent.pinch...@ideasonboard.com wrote:
Hi Javier,
On Wednesday 25 May 2011 11:41:42 javier Martin wrote:
Hi,
thank you for the review, I agree with you on all the suggested
changes except on this one:
On 25 May 2011 10:05, Laurent Pinchart wrote:
On Wednesday, May 25, 2011 22:06:38 Laurent Pinchart wrote:
Hi Jerry,
On Wednesday 25 May 2011 21:44:59 Jerry Geis wrote:
I am trying to find the code for h.264 mentioned
http://www.spinics.net/lists/linux-media/msg29129.html
I downloaded the linux-media-2011-05.24 and it is not part
On Fri, 27 May 2011, javier Martin wrote:
On 25 May 2011 11:43, Laurent Pinchart
laurent.pinch...@ideasonboard.com wrote:
Hi Javier,
On Wednesday 25 May 2011 11:41:42 javier Martin wrote:
Hi,
thank you for the review, I agree with you on all the suggested
changes except on this one:
Antti Palosaari cr...@iki.fi writes:
On 05/27/2011 12:25 AM, Nicolas WILL wrote:
Just installed mine for MythTV.
Works great on the first try!
Many, many thanks!
Thank you for the feedback!
I'm a bit curious about this device. It seems to only be marketed as a
DVB-T2 device in areas
On Fri, 27 May 2011 13:36:37 +0200, Bjørn Mork bj...@mork.no wrote:
Antti Palosaari cr...@iki.fi writes:
On 05/27/2011 12:25 AM, Nicolas WILL wrote:
Just installed mine for MythTV.
Works great on the first try!
Many, many thanks!
Thank you for the feedback!
I'm a bit curious
-Original Message-
From: linux-media-ow...@vger.kernel.org [mailto:linux-media-
ow...@vger.kernel.org] On Behalf Of Bjørn Mork
Sent: 27 May 2011 12:37
To: linux-media@vger.kernel.org
Subject: Re: PCTV nanoStick T2 290e support - Thank you!
Antti Palosaari cr...@iki.fi writes:
Rémi Denis-Courmont r...@remlab.net writes:
On Fri, 27 May 2011 13:36:37 +0200, Bjørn Mork bj...@mork.no wrote:
I'm a bit curious about this device. It seems to only be marketed as a
DVB-T2 device in areas where that spec is used. But looking at your
driver, it seems that the device also
Hi, Guennadi
Sorry to answer the question so later,
From: Guennadi Liakhovetski Sent: Thursday, May 12, 2011 5:32 PM
On Thu, 12 May 2011, Wu, Josh wrote:
Hi, Russell
From: Russell King - ARM Linux [mailto:li...@arm.linux.org.uk] Sent:
Thursday, May 12, 2011 3:47 PM
On Thu, May 12,
The demodulator chip supports T,T2 and C.
Here in the UK you're not really allowed to attach cable receivers that
aren't supplied by the cable company (Virgin Media). That and the fact
that it has no access module for obvious reasons, I guess PCTV Systems
didn't see the benefit in marketing the C
+/* ISI interrupt service routine */
+static irqreturn_t isi_interrupt(int irq, void *dev_id)
+{
+ struct atmel_isi *isi = dev_id;
+ u32 status, mask, pending;
+ irqreturn_t ret = IRQ_NONE;
+
+ spin_lock(isi-lock);
+
+ status = isi_readl(isi, ISI_STATUS);
+ mask
Hi, I have a board with empia chipset. The em28xx driver not load,
because the device ID is not listed on source(cards.c, I guess).
Following bellow
have some infos from board:
lsusb:
Bus 001 Device 004: ID 1b80:e755 Afatech
Opening the device, shows this ic:
empia em2888 d351c-195 727-00ag
Steve Kerrison st...@stevekerrison.com writes:
The demodulator chip supports T,T2 and C.
Here in the UK you're not really allowed to attach cable receivers that
aren't supplied by the cable company (Virgin Media). That and the fact
that it has no access module for obvious reasons, I guess
Hi Bjørn,
I thought downloading the Windows driver would tell, but
a) I cannot seem to find the Windows driver for this device, and
b) this info isn't easily found in the drivers I looked at
The bundled CD has the drivers on it, but I think it's also in the
driver bundle on their site for
This patch series is to handle some issues about M-5MOLS driver.
Except for first patch, most of these issues comes from to Sakari,
And I very appreciate the comments and reviews about this driver. Thanks.
The first change is fixing to read wrong capture image size.
The second change is
Signed-off-by: HeungJun, Kim riverful@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
drivers/media/video/m5mols/m5mols_reg.h |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/video/m5mols/m5mols_reg.h
For now, the m5mols_read() share in case of I2C packet 1, 2, 4 byte(2) width.
So, this commit adds 3 functions - m5mols_read_u8/u16/u32() according to byte
width of I2C packet. And, the u32 variables in spite of u8 or u16 for fitting
to m5mols_read() having no choice, is replaced to have original
Remove union version in the m5mols_get_version(), and read version information
directly. Also remove VERSION_SIZE.
Signed-off-by: HeungJun, Kim riverful@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
drivers/media/video/m5mols/m5mols.h |1 -
The m5mols_capture_post_work() is collecting works after capture. The order
should
be kept, and it's safe to say success of capture when all this conditions are
fine.
Signed-off-by: HeungJun, Kim riverful@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
Signed-off-by: HeungJun, Kim riverful@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
drivers/media/video/m5mols/m5mols.h |4 ++--
drivers/media/video/m5mols/m5mols_capture.c |4 ++--
drivers/media/video/m5mols/m5mols_controls.c |4 ++--
On Friday 27 May 2011, Josh Wu wrote:
This patch is to enable Atmel Image Sensor Interface (ISI) driver support.
- Using soc-camera framework with videobuf2 dma-contig allocator
- Supporting video streaming of YUV packed format
- Tested on AT91SAM9M10G45-EK with OV2640
Signed-off-by: Josh
Hi Linus,
Please pull from:
ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
v4l_for_linus
For a few more stuff for 3.0-rc1 (or 2.6.40-rc1).
This series contain a few bug fixes, and some stuff that were ready for the
merge window, but they took me some time to finish my
Hi Javier,
On Thursday 26 May 2011 13:31:37 javier Martin wrote:
OK, I think I've found the problem with the power management.
As it is stated in mt9p031 datasheet [3] p 59, a sequence involving
[VAA,VAA_PIX,VDD_PLL], [VDD,VDD_IO], [Reset] and [Ext Clk] must be
followed in order to properly
Hi Daniel,
On Thursday 26 May 2011 15:06:17 Daniel Lundborg wrote:
On Thursday 26 May 2011 10:57:39 Daniel Lundborg wrote:
Hello,
I am developing a camera sensor driver for the Aptina MT9V034. I am only
using it in snapshot mode and I can successfully trigger the sensor and
Fix a compiler warning, introduced by the commit aed65af1
Author: Stephen Hemminger shemmin...@vyatta.com
drivers: make device_type const
Signed-off-by: Guennadi Liakhovetski g.liakhovet...@gmx.de
---
drivers/media/video/soc_camera.c |2 +-
1 files changed, 1 insertions(+), 1
This patch series sits on top of the Control Event patch series I posted on
Wednesday.
It adds core support for the common autofoo/foo controls (e.g. autogain/gain,
autoexposure/exposure, etc.).
See the commit comments of patches 1 and 3 and the documentation changes
in patch 4 for detailed
From: Hans Verkuil hans.verk...@cisco.com
If you have a cluster of controls that is a mix of volatile and non-volatile
controls, then requesting the value of the volatile control would fail if the
master control of that cluster was non-volatile. The code assumed that the
volatile state of the
From: Hans Verkuil hans.verk...@cisco.com
Signed-off-by: Hans Verkuil hans.verk...@cisco.com
---
drivers/media/video/vivi.c | 51 +--
1 files changed, 34 insertions(+), 17 deletions(-)
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
From: Hans Verkuil hans.verk...@cisco.com
It is a bit tricky to handle autogain/gain type scenerios correctly. Such
controls need to be clustered and the V4L2_CTRL_FLAG_UPDATE should be set on
the autofoo controls. In addition, the manual controls should be marked
read-only or inactive when the
From: Hans Verkuil hans.verk...@cisco.com
Signed-off-by: Hans Verkuil hans.verk...@cisco.com
---
Documentation/video4linux/v4l2-controls.txt | 56 +++
1 files changed, 56 insertions(+), 0 deletions(-)
diff --git a/Documentation/video4linux/v4l2-controls.txt
On 27 May 2011 16:31, Laurent Pinchart
laurent.pinch...@ideasonboard.com wrote:
Hi Javier,
On Thursday 26 May 2011 13:31:37 javier Martin wrote:
OK, I think I've found the problem with the power management.
As it is stated in mt9p031 datasheet [3] p 59, a sequence involving
Signed-off-by: Jarod Wilson ja...@redhat.com
---
drivers/media/rc/nuvoton-cir.c |2 --
drivers/media/rc/nuvoton-cir.h |1 -
2 files changed, 0 insertions(+), 3 deletions(-)
diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c
index bf3060e..565f24c 100644
---
Hans Petter Selasky pointed out to me that we're leaking urbs when
mce_async_out is called. Its used both for configuring the hardware and
for transmitting IR data. In the tx case, mce_request_packet actually
allocates both a urb and the transfer buffer, neither of which was being
torn down. Do
Hello,
I would like to join the line of thankers for this wonderful driver. I
am using it with experimental DVB-T2 broadcast in Prague, CZE to stream
whole T2 MUX to a campus network using DVBlast. It run for a month now,
and only outages was the outages of the experimental transmisson itself.
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Fri May 27 19:01:05 CEST 2011
git hash:f9b51477fe540fb4c65a05027fdd6f2ecce4db3b
gcc version: i686-linux-gcc (GCC)
Store the cdev pointer in struct irctl, allocated dynamically as needed,
rather than having a static array. At the same time, recycle some of the
saved memory to nudge the maximum number of lirc devices supported up a
ways -- its not that uncommon these days, now that we have the rc-core
lirc
Hi All,
I need something but willing to help out!
I just got my Terratec Cinergy C HD card. After relatively minor issues I got
the card running on my Mandriva 2010.2 (kernel 2.6.33) myth box.
But... I am getting my DVB-C signal from the Ziggo (former Casema) network. I
found a post that
Op 27-05-11 21:48, Willem van Asperen schreef:
a) CAM support is currently not implemented for terratec HD
For all cards?
I use TNT/dvb sticks, and you should be able to decode HD video with a
so called no hd usb stick.
Because it is a question of software, not hardware.
Maybe, if one
There was a missing lock in fintek_suspend. Without the lock, its
possible the system will be in the middle of receiving IR (draining the
RX buffer) when we try to disable CIR interrupts.
Signed-off-by: Jarod Wilson ja...@redhat.com
---
drivers/media/rc/fintek-cir.c |5 +
1 files
44 matches
Mail list logo