Guennadi Liakhovetski wrote:
> sorry for hijacking the thread, just a quick notice to say, that my
> Logitech QuickCam Messenger webcam (USB_DEVICE(0x046d, 0x08da)) is not
> working with recent kernels either, but, it used to work with out-of-tree
> gspca, I think, gspcav1-20071224 did work (I m
Analog Devices ADV7343 video encoder driver
Add ADV7343 I2C based video encoder driver. This follows the v4l2-subdev
framework.This driver has been tested on TI DM646x EVM. It has been tested for
Composite and Component outputs.
In this verision of the patch, review comments have been incorporate
Mauro,
This patch allows users with multiple remotes to specify an RC5 address for a
remote from which key codes will be accepted. If no address is specified, the
default value of 0 accepts key codes from any remote. This replaces the current
hard-coded address checks, which are too restrictive.
In message <20090326023841.40ab3...@laptop.hypervisor.org>, "Udo A. Steinberg"
wrote:
hi
>On Thu, 26 Mar 2009 00:26:47 + Darron Broad (DB) wrote:
>
>DB> It's something I forget to deal with in that patch. A solution
>DB> would be to allow a device address to be a module param to
>DB> overrid
On Wed, 25 Mar 2009 11:19:42 +0100
Jean-Francois Moine wrote:
> Hi Mauro,
>
> Please pull from http://linuxtv.org/hg/~jfrancois/v4l-dvb/
> for:
>
> changeset: 11141:8f6800be5b0f
> gspca - vc032x: New sensor mi1320_soc and webcam 15b8:6001 added.
>
> changeset: 11156:fb4ba7eaa8b0
> gspca -
On Thu, 26 Mar 2009 00:26:47 + Darron Broad (DB) wrote:
DB> It's something I forget to deal with in that patch. A solution
DB> would be to allow a device address to be a module param to
DB> override the more modern addresses of 0x1e and 0x1f.
DB>
DB> I can't remember addresses off the top of
Erik Andrén wrote:
>
>
> Guennadi Liakhovetski wrote:
>> Forwarding to linux-media for a better chance for a reply.
>
>> ---
>> Guennadi Liakhovetski, Ph.D.
>> Freelance Open-Source Software Developer
>
>> -- Forwarded message --
>> Date: Wed, 25 Mar 2009 17:08:05 +
>> From:
In message <20090326000932.6aa1a...@laptop.hypervisor.org>, "Udo A. Steinberg"
wrote:
>
>Hi,
>
>The following patch
>http://kerneltrap.org/mailarchive/git-commits-head/2008/10/13/3643574
>that was added between 2.6.27 and 2.6.28 has resulted in my Hauppauge
>WinTV IR remote not working anymore. I'
On Tue, 24 Mar 2009 23:07:02 -0500 (CDT)
Mike Isely wrote:
>
> Mauro:
>
> Please pull from http://linuxtv.org/hg/~mcisely/pvrusb2 for a large
> collection of pvrusb2 changesets (see below).
Applied, thanks!
> Way back around
> November 2005, I had written a large chunk of code in the driver
Hi all,
I have an HVR-1250 card working fine, but of course with the digital tuning
only. I was just wondering if there is any future worked planned for this
chipset/card (Analog input, IR remote support)? I've searched high and low
for a datasheet for the chipset in order to try to finish up
Hi,
The following patch
http://kerneltrap.org/mailarchive/git-commits-head/2008/10/13/3643574
that was added between 2.6.27 and 2.6.28 has resulted in my Hauppauge
WinTV IR remote not working anymore. I've tracked down the breakage to:
if (dev!=0x1e && dev!=0x1f)
return 0;
in drivers/media/vi
sorry for hijacking the thread, just a quick notice to say, that my
Logitech QuickCam Messenger webcam (USB_DEVICE(0x046d, 0x08da)) is not
working with recent kernels either, but, it used to work with out-of-tree
gspca, I think, gspcav1-20071224 did work (I might still be able to bring
up the m
Hi,
I have implemented V4L2_CAP_STREAMING for the zr364xx driver (see the
attached file). Could you review the code for me? My
Creative PC-CAM 880 works, but I do not have any other webcam to test the
code. Besides the streaming implementation the patch also does:
. re-implemen
Hello,
how should I format my post in order to patchwork tool understand
included patch correctly,
should I just format it like in v4l-dvb/README.patches described?
then how should I add additional comments to the mail which I do not
want to be in the patch log?
It seems it is possible without spe
On Wed, Mar 25, 2009 at 6:02 PM, Manu Abraham wrote:
> Sure, of course. Here is an updated list based on the information
> that you accumulated. I have corrected some of them, which were not
> accurate.
Before I comment any further on your email, could you please clarify
what you mean by "Relativ
Devin Heitmueller wrote:
> On Tue, Mar 24, 2009 at 7:46 PM, Manu Abraham wrote:
>> Mika Laitio wrote:
>> That said, the solution takes the approach of "revolutionary" as
>> opposed to "evolutionary", which always worries me. While providing a
>> much more powerful interface, it also m
Hello, please review the new version of v4l2 loopback driver.
I fixed up comments to the previous submission, waiting for the new ones :-)
---
This patch introduces v4l2 loopback module
From: Vasily Levin
This is v4l2 loopback driver which can be used to make available any userspace
video as v4
On Wed, Mar 25, 2009 at 2:38 AM, Christian Lyra wrote:
> Hi
>>> > > Hi,
>>> > > Am Donnerstag, den 09.10.2008, 22:15 +0200 schrieb klaas de waal:
>>> > > The table starts a new segment at 390MHz,
>>> > > > it then starts to use VCO2 instead of VCO1.
>>> > > > I have now (hack, hack) changed the s
(2nd try, this should be now in "plain text" instead of HTML)
Hi Hermann,
Thanks for your "howto" on making a proper patch.
After a "make commit" in my local v4l-dvb tree, and filling in the
template I got the following output.
I confess I do not know if this has now ended up somewhere in
linuxt
Guennadi Liakhovetski writes:
> pxa_dma_update_sg_tail() is called only once, runs exactly the same loop as
> the
> caller and has to recalculate the last element in an sg-list, that the caller
> has already calculated. Eliminate redundancy by merging the two loops and
> re-using the calculated
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Guennadi Liakhovetski wrote:
> Forwarding to linux-media for a better chance for a reply.
>
> ---
> Guennadi Liakhovetski, Ph.D.
> Freelance Open-Source Software Developer
>
> -- Forwarded message --
> Date: Wed, 25 Mar 2009 17:08:0
Hello Mauro,
Please pull http://linuxtv.org/hg/~anttip/ce6230/
for the following:
zl10353: add support for Intel CE6230 and Intel CE6231
Add driver for Intel CE6230 DVB-T USB2.0
Patch series adds new DVB USB driver targeted for 2.6.30.
regards
Antti
--
http://palosaari.fi/
--
To unsubscribe fr
On Wed, 25 Mar 2009 01:43:48 -0700 (PDT)
Uri Shkolnik wrote:
>
> Hi Pierre,
>
> The SDIO patches are part of (at least) dozen patches needed to upgrade the
> Siano's offering for Linux kernel.
>
> The order is -
> 1) SDIO SMS interface driver and SDIO stack patch (add)
> 2) SPI interface driv
Forwarding to linux-media for a better chance for a reply.
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
-- Forwarded message --
Date: Wed, 25 Mar 2009 17:08:05 +
From: Sid Boyce
To: linux-...@vger.kernel.org
Subject: Asus PG221 monitor camera sens
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Wed Mar 25 19:00:03 CET 2009
path:http://www.linuxtv.org/hg/v4l-dvb
changeset: 11153:56cf0f1772f7
gcc version: gcc (
Thomas Kaiser wrote:
> Thomas Kaiser wrote:
>> Hello Anders
>>
>> Good news, I could decode a frame which I extracted from the usbsnoobs I
>> did :-). See attached picture frame3-03.jpg. It uses the quality 0.
>>
>> Your black frame you sent me gets now correctly decode, too (frameA-01.jpg)
>>
>>
Hi,
linuxtv.org will move to a new server machine tomorrow. Expect
some downtime during the move and please be patient. Everything
on the old machine will be rsynced to the new machine right before
the switch so nothing should get lost.
Cheers,
Johannes
--
To unsubscribe from this list: send the
From: Márton Németh
When enumerating audio inputs with VIDIOC_ENUMAUDIO the gspca_sunplus driver
does not fill the reserved fields of the struct v4l2_audio with zeros as
required by V4L2 API revision 0.24 [1]. Add the missing initializations to
the V4L2 framework.
The patch was tested with v4l-t
Stephen Rothwell wrote:
> Hi all,
>
> Changes since 20090324:
drivers/built-in.o: In function `cx231xx_audio_fini':
cx231xx-audio.c:(.text+0x23f84e): undefined reference to `snd_card_free'
drivers/built-in.o: In function `cx231xx_audio_isocirq':
cx231xx-audio.c:(.text+0x23fa5f): undefined refere
Hi,
On Wed, Mar 25, 2009 at 09:34:13AM +0200, Darius Augulis wrote:
>
> subj.
> Want to still subscribed, but don't need all these posts in my mailbox.
> How to disable?
Since everyone can send mails to the list there is no need to be
subscribed if you don't want to receive mails.
HTH
Janne
--
Darius Augulis wrote:
> Hi All,
>
> subj.
> Want to still subscribed, but don't need all these posts in my mailbox.
> How to disable?
Why do you want to be subscribed?
You don't need to be subscribed in order to be able to post messages
to the mailing list.
--
~Randy
--
To unsubscribe from thi
> Hi Hans,
>
> On Wednesday 25 March 2009 11:18:31 Hans de Goede wrote:
>>
>>
>> Hi,
>>
>> Today it came to my attention (through a libv4l bugreport) that
>> the uvc driver and the gspca driver handle the setting of
>> the v4l parent for usb webcams differently.
>>
>> The probe function for an us
Hi Hans,
On Wednesday 25 March 2009 11:18:31 Hans de Goede wrote:
>
>
> Hi,
>
> Today it came to my attention (through a libv4l bugreport) that
> the uvc driver and the gspca driver handle the setting of
> the v4l parent for usb webcams differently.
>
> The probe function for an usb driver gets p
On Tue, Mar 24, 2009 at 7:46 PM, Manu Abraham wrote:
> Mika Laitio wrote:
> That said, the solution takes the approach of "revolutionary" as
> opposed to "evolutionary", which always worries me. While providing a
> much more powerful interface, it also means all of the applications
>>
Hi Mauro,
Please pull from http://linuxtv.org/hg/~jfrancois/v4l-dvb/
for:
changeset: 11141:8f6800be5b0f
gspca - vc032x: New sensor mi1320_soc and webcam 15b8:6001 added.
changeset: 11156:fb4ba7eaa8b0
gspca - vc032x: Simplify the i2c write function.
changeset: 11157:01ea4082081f
gspca - vc
Hi,
Today it came to my attention (through a libv4l bugreport) that
the uvc driver and the gspca driver handle the setting of
the v4l parent for usb webcams differently.
The probe function for an usb driver gets passed in a
"struct usb_interface *intf" parameter.
uvc sets parent to:
vdev->pa
On 03/23/2009 08:40 PM, Erik Andrén wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi Hans,
I'm trying to get gstreamer and the yuv420 format conversion in
libv4l to play nice with the gspca-stv06xx driver. Currently this is
not working.
The resolution of the vv6410 sensor is 356*292 pi
Changes since prev. version:
- Rebased on 2.6.29
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
From: Paulius Zaleckas
Driver for i.MX1/L camera (CSI) host.
Signed-off-by: Paulius Zaleckas
---
Index: linux-2.6.29/drivers/media/video/imx_camera.c
===
--- /dev/null
+++ linux-2.6.29/drivers/media/video/imx_camera.c
@@ -0,0
--- On Tue, 3/24/09, Pierre Ossman wrote:
> From: Pierre Ossman
> Subject: Re: [PATCH 1/1 re-submit 1] sdio: add low level i/o functions for
> workarounds
> To: "Uri Shkolnik"
> Cc: "Mauro Carvalho Chehab" , "Linux Media Mailing
> List"
> Date: Tuesday, March 24, 2009, 10:04 PM
> On Sun,
pxa_dma_update_sg_tail() is called only once, runs exactly the same loop as the
caller and has to recalculate the last element in an sg-list, that the caller
has already calculated. Eliminate redundancy by merging the two loops and
re-using the calculated pointer. This also saves a bit of performan
I asked the same question some time ago... Apparently you can't: the
only alternative is to unsubscribe to the list and then using a RSS
feed reader (better if it lets you directly answer a given message in
the list).
Or else use the gmane interface to the list:
http://news.gmane.org/gmane.linux.
On Tuesday 24 March 2009 14:40:02 Chaithrika U S wrote:
> Analog Devices ADV7343 video encoder driver
>
> Add ADV7343 I2C based video encoder driver. This follows the v4l2-subdev
> framework.This driver has been tested on TI DM646x EVM. It has been
> tested for Composite and Component outputs.
>
>
Hi All,
subj.
Want to still subscribed, but don't need all these posts in my mailbox.
How to disable?
Thanks.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo
On Tuesday 24 March 2009 14:40:21 Chaithrika U S wrote:
> TI THS7303 video amplifier driver code
>
> This patch adds driver for TI THS7303 video amplifier. This driver is
> implemented as a v4l2 sub device. Tested on TI DM646x EVM.
>
> This patch applies on top of the ADV7343 driver patch submitted
On Wednesday 25 March 2009 07:59:30 Németh Márton wrote:
> From: Márton Németh
>
> When enumerating formats with VIDIOC_ENUM_FMT the uvcvideo driver does
> not fill the reserved fields of the struct v4l2_fmtdesc with zeros as
> required by V4L2 API revision 0.24 [1]. Add the missing initialization
On Wednesday 25 March 2009 00:18:45 Andy Walls wrote:
> On Tue, 2009-03-24 at 10:04 +0100, Hans Verkuil wrote:
> > Hmm, everything is OK.
> >
> > Let's enjoy this moment of perfection! It probably won't last long :-)
> >
> > Regards,
> >
> >Hans
> >
> > > This message is generated daily by
47 matches
Mail list logo